Related
Rom manager now has a clockwork mod recovery for the HD2.. is it safe to flash roms now with magldr installed?
Sent from my HTC HD2 using XDA Premium App
My phone is still showing up in ROM Manager as a Desire. I uninstalled and reinstalled RM and have modified my build.prop to show my phone as a HD2.
Sent from my HTC HD2 using XDA App
huggs said:
My phone is still showing up in ROM Manager as a Desire. I uninstalled and reinstalled RM and have modified my build.prop to show my phone as a HD2.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
in rom manager when you click on flash recovery do you get a list of phones to choose from? you should see "HTC HD2" on the list.
I take it yours worked as well... were you able to reboot into recovery?
Sent from my HTC HD2 using XDA Premium App
Didn't look there, just opened the list of roms. I'll check it out tonite, busy now.
Sent from my HTC HD2 using XDA App
LeoTheRomRasta said:
I take it yours worked as well... were you able to reboot into recovery?
Sent from my HTC HD2 using XDA Premium App
Click to expand...
Click to collapse
Just downloaded the free version of ROM Manager and it would not reboot into recovery, I tried twice. I also tried flashing Clockwork Mod Recovery (even though I already have it flashed to my HD2) becausecevery thing besides reboot into recovery and flash Clockwork Mod Recovery give me a message saying I need Clockwork Mod Recovery before I can use it. But when I tried to flash Clockwork Mod recovery it did list the HTC HD2 in the list but it said it incountered an error while flashing Clockwork Mod Recovery, again I tried twice and same message both times. But I checked and I do still have Clockwork Mod Recovery on my HD2. Maybe you have to use cLK with ROM Manager cause in the information on the ROM Manager when you find it in the Android market says for this.
HTC Users: Flash recovery not working? Try fastbooting a recovery on.
Click to expand...
Click to collapse
You only use fastboot with cLK, if I still had a functioning laptop (LCD screen not working) Iwould test this. But this is not possible for me at the moment.
T-Macgnolia said:
Maybe you have to use cLK with ROM Manager cause in the information on the ROM Manager when you find it in the Android market says for this.
Click to expand...
Click to collapse
ROM Manager currently only works with cLK bootloader.
zach.antre said:
ROM Manager currently only works with cLK bootloader.
Click to expand...
Click to collapse
Thanks for the confirmation. I kinda figured that when I seen fastboot mentioned in the trouble shooting for the app on the market. I just did not want to just assume it worked with cLK or only worked with cLK without being able to test it first. I try hard not to give out false information in the forums. Thanks again though.
zach.antre said:
ROM Manager currently only works with cLK bootloader.
Click to expand...
Click to collapse
hi,
Do you know when it will start working with magldr?
I updated it and bought the premium version, because I was trying to update the boot loader.
I clicked on flash clockworkmod recovery and it updated to 3.0.2.5.
But when I tried to load a d recovery,I just got an error
So I presume it has installed clk?
Don't know how I'm going to get my ad recovery back.i guess I'll have to read up on that.
I did check online for some instructions on ROM manager, but no joy.
Flashed from my fingers to your face
malybru said:
hi,
Do you know when it will start working with magldr?
I updated it and bought the premium version, because I was trying to update the boot loader.
I clicked on flash clockworkmod recovery and it updated to 3.0.2.5.
But when I tried to load a d recovery,I just got an error
So I presume it has installed clk?
Don't know how I'm going to get my ad recovery back.i guess I'll have to read up on that.
I did check online for some instructions on ROM manager, but no joy.
Flashed from my fingers to your face
Click to expand...
Click to collapse
I don't know about it flashing cLK to your HD2 bit if you want to flash cLK PM me and I can help you with it. Cause cLK is not as easycas MAGLDR.
It works!
LeoTheRomRasta said:
Rom manager now has a clockwork mod recovery for the HD2.. is it safe to flash roms now with magldr installed?
Sent from my HTC HD2 using XDA Premium App
Click to expand...
Click to collapse
+1
Installed rom manger and when i tried to flash cwm, HTC HD2 appeared on the devices list for the very first time (i tell you what, it felt great really great), this was the last thing needed to make HTC HD2 fully compatible with android os.
Updated cwm and did a nandroid backup from within rom manger, without a single problem, how cool is that?
This my dear friends was the icing on the cake (sort of speak) for this great piece of hardware and its long road into running android as well as any other native "made for android" hardware. This is it.
Thanks a lot to the devs and their testers who for making this all happen, thank you guys, you did make the impossible, possible, here is proof to that.
Thank you cedesmith for your "not so little" cLK.
Thank you pongster for your amazing roms.
p.s. Hyperdroid GBX is already available to download from rom manager, what do you say to that?
THX
azer0 said:
+1
Installed rom manger and when i tried to flash cwm, HTC HD2 appeared on the devices list for the very first time (i tell you what, it felt great really great), this was the last thing needed to make HTC HD2 fully compatible with android os.
Updated cwm and did a nandroid backup from within rom manger, without a single problem, how cool is that?
This my dear friends was the icing on the cake (sort of speak) for this great piece of hardware and its long road into running android as well as any other native "made for android" hardware. This is it.
Thanks a lot to the devs and their testers who for making this all happen, thank you guys, you did make the impossible, possible, here is proof to that.
Thank you cedesmith for your "not so little" cLK.
Thank you pongster for your amazing roms.
p.s. Hyperdroid GBX is already available to download from rom manager, what do you say to that?
THX
Click to expand...
Click to collapse
Almost makes me want to switch to cLK, but I hear of data and cell problems.
malybru said:
hi,
Do you know when it will start working with magldr?
I updated it and bought the premium version, because I was trying to update the boot loader.
I clicked on flash clockworkmod recovery and it updated to 3.0.2.5.
But when I tried to load a d recovery,I just got an error
So I presume it has installed clk?
Don't know how I'm going to get my ad recovery back.i guess I'll have to read up on that.
I did check online for some instructions on ROM manager, but no joy.
Flashed from my fingers to your face
Click to expand...
Click to collapse
Well... as much i have figured out ROM Manager is not available for MAGLDR yet because of the /boot partition formating.
cLK is formating /boot partition with different file system of MAGLDR which allow ROM Manager to work on cLK.
Now if you would like to change from MAGLDR to cLK it is actually very easy and simple.
Here are the steps:
download cLK 1.4 from here
(cLK is managing the partitioning of the disk therefore you will see different filenames. I use the System:130M / Cache:5M for Ultimate Droid Rom)
The flashing of cLK is done same way as you flash WinMo (with CustomRUU). Just place in the same folder CustomRUU.exe and RUU_signed.nbh and run as administrator.
Ofcourse you have to be in bootloader mode (you know the screen with the 3 colors that shows the HSPL version)
After flashing cLK you need to have installed the adb drivers. On my expirience in Windows 7 are automaticly installed.
After that you have to download the necessary files for the fastboot commands to work from here
Extract the file to i.e. c:\android
Then you have to download ClockWorkMod Recovery for cLK from here. Download from attachements CWM for cLK.
Place the cwm *.img in the same folder as fastboot.
Now, in order to install the cwm to cLK you need to:
Run cmd
Navigate to c:\android (on cmd)
and
Code:
Type "fastboot erase recovery" (<- not really necessary; just to make sure), followed by enter
Type "fastboot flash recovery cLK_recovery_3.0.2.5.img", followed by enter
Type "fastboot reboot" for rebooting your phone
Once rebooted hold down the home button and you will enter CWM
The rest you know what to do.
I use UD Rom 3.2.5 v2 for cLK with a fix for PPP which is actually very stable from here. You can copy/paste this fix to /system/lib with the use of terminal (you must reboot after and must not clear cache)
If you don't care about the internet connection stability so much... cLK is a must for you.
PS: If you need more info about installing read the cLK and CWM thread
timekeeper said:
Almost makes me want to switch to cLK, but I hear of data and cell problems.
Click to expand...
Click to collapse
only data problems.
zach.antre said:
Well... as much i have figured out ROM Manager is not available for MAGLDR yet because of the /boot partition formating.
cLK is formating /boot partition with different file system of MAGLDR which allow ROM Manager to work on cLK.
Now if you would like to change from MAGLDR to cLK it is actually very easy and simple.
Here are the steps:
download cLK 1.4 from here
(cLK is managing the partitioning of the disk therefore you will see different filenames. I use the System:130M / Cache:5M for Ultimate Droid Rom)
The flashing of cLK is done same way as you flash WinMo (with CustomRUU). Just place in the same folder CustomRUU.exe and RUU_signed.nbh and run as administrator.
Ofcourse you have to be in bootloader mode (you know the screen with the 3 colors that shows the HSPL version)
After flashing cLK you need to have installed the adb drivers. On my expirience in Windows 7 are automaticly installed.
After that you have to download the necessary files for the fastboot commands to work from here
Extract the file to i.e. c:\android
Then you have to download ClockWorkMod Recovery for cLK from here. Download from attachements CWM for cLK.
Place the cwm *.img in the same folder as fastboot.
Now, in order to install the cwm to cLK you need to:
Run cmd
Navigate to c:\android (on cmd)
and
Code:
Type "fastboot erase recovery" (<- not really necessary; just to make sure), followed by enter
Type "fastboot flash recovery cLK_recovery_3.0.2.5.img", followed by enter
Type "fastboot reboot" for rebooting your phone
Once rebooted hold down the home button and you will enter CWM
The rest you know what to do.
I use UD Rom 3.2.5 v2 for cLK with a fix for PPP which is actually very stable from here. You can copy/paste this fix to /system/lib with the use of terminal (you must reboot after and must not clear cache)
If you don't care about the internet connection stability so much... cLK is a must for you.
PS: If you need more info about installing read the cLK and CWM thread
Click to expand...
Click to collapse
Hi,
Firstly ,thanks for the tut.
I'm not sure I'm ready for clk right now.My only gripe was that it wasn't overly clear that ROM manager was only for clk,not magldr.
If you,or anyone else on magldr, care to read this thread:
http://forum.xda-developers.com/showthread.php?t=1040564
you can see that I wasn't the only one with this problem.
Having said that,all's well that ends well.
I bought the program because it looked like a great app.
It probably is,but not for me just yet.
At zach.anger why did you say if internet connection stabilitycis notcan issue then cLK is a must. Does cLK cause problems with keeing a data connection?
Also educate me on what PPP is please? I have been reading all through the cLK thread and CWM thread and have not seen an answer.
T-Macgnolia said:
At zach.anger why did you say if internet connection stabilitycis notcan issue then cLK is a must. Does cLK cause problems with keeing a data connection?
Also educate me on what PPP is please? I have been reading all through the cLK thread and CWM thread and have not seen an answer.
Click to expand...
Click to collapse
PPP is 'Point to Point Protocal', it is the alternative to RMNET type of data connection. clk doesn't support RMNET, which some consider to have a steadier data connection (no data drops) at a bit of a cost in data speed. But really ppp has come a long way since we first started having Android on our HD2's. I use ppp on a ROM that was originally on RMNET, and I never experience data drops, but some folks still prefer RMNET, or even can't get a data connection at all ob PPP.
As far as clk being a must, if you have no data issues with ppp:
clk is more like having a native Android device, it enables you to use fastboot commands from adb, and since there's no MAGLDR menu in the way between the OS and recivery, you can use the Advanced Shutdown menu built into some ROMs to boot directly from Android into CWM. That's also why ROM Manager works with clk and not MAGLDR.
Sent from my HTC HD2 using XDA App
huggs said:
PPP is 'Point to Point Protocal', it is the alternative to RMNET type of data connection. clk doesn't support RMNET, which some consider to have a steadier data connection (no data drops) at a bit of a cost in data speed. But really ppp has come a long way since we first started having Android on our HD2's. I use ppp on a ROM that was originally on RMNET, and I never experience data drops, but some folks still prefer RMNET, or even can't get a data connection at all ob PPP.
As far as clk being a must, if you have no data issues with ppp:
clk is more like having a native Android device, it enables you to use fastboot commands from adb, and since there's no MAGLDR menu in the way between the OS and recivery, you can use the Advanced Shutdown menu built into some ROMs to boot directly from Android into CWM. That's also why ROM Manager works with clk and not MAGLDR.
Sent from my HTC HD2 using XDA App
Click to expand...
Click to collapse
Thanks for the info.
I knew about RMNET not working with cLK, even though I do not know what it is yet lol, I have not googled it yet. Bit I had tried Googling PPP and came up empty using several search terms, well not empty but not the answer I was looking for.
I also knew about being able to enter the ADB fastboot commands using cLK. I have been doing a good bit of research on cLK as I am wanting to add it to my guide in my sig. I am still wondering one thing though. I accidently busted the LCD on my laptop so I can not test this myself. But can you use the fastboot commands to flash a Android ROM just like you usecthem to flash CWM. I mean it seems to me all you have to do is type in the below command into the command promt.
fastboot flash (name of the .img file for the ROM).img
Am I correct in thinking this?
Pretty sure it will work. But I dunno 100% for sure, as I'm still using magldr. clk looks so attractive, butmy current setup is so stable, and I'm a bit lazy to switch
Sent from my HTC HD2 using XDA App
T-Macgnolia said:
Thanks for the info.
I knew about RMNET not working with cLK, even though I do not know what it is yet lol, I have not googled it yet. Bit I had tried Googling PPP and came up empty using several search terms, well not empty but not the answer I was looking for.
I also knew about being able to enter the ADB fastboot commands using cLK. I have been doing a good bit of research on cLK as I am wanting to add it to my guide in my sig. I am still wondering one thing though. I accidently busted the LCD on my laptop so I can not test this myself. But can you use the fastboot commands to flash a Android ROM just like you usecthem to flash CWM. I mean it seems to me all you have to do is type in the below command into the command promt.
fastboot flash (name of the .img file for the ROM).img
Am I correct in thinking this?
Click to expand...
Click to collapse
As said before RMNET and PPP are 2 different connection protocols.
RMNET is stable and supported by MAGLDR and not by cLK
PPP is supported by cLK but not stable as RMNET.
Concerning the benefits of cLK it just makes your HD2 a native android device, with all the benefits of it... Thats all.
About the command you are right. You can use the commands to flash any partition table as following:
"fastboot flash [partition to flash] *.img"
for example you only want to flash a new boot.img (kernel & init.rd) you just need to type:
fastboot erase boot
fastboot flash boot boot.img
you can also flash specific files from within an img but i don't remember the exact commands right now.
Hello,
a month before i flashed my HTC HD2 to a DFT Froyo 2.2 Sense ROM.
Softwareversions as i undestand them are the following
Magldr 1.13
Android 2.2
Baseband 15.38.50.07U_2.10.50.19_2
Kernel 2.6.32.15 by cotulla
BuildNo 2.29.405.5 CL293415 release-keys
SoftwareNo. 2.29.405.5
Browser Webkit 3.1
I found the information to do this around in the internet. Knowing about XDA i decided to flash my Desire HD to Revolution HD. After having done the flash i found a lot more stuff around XDA and decided to flash my HD2 again to a newer mod.
Having bought CWM i thought it would be easy to flash the HD2 to another mod, but after installing ROM-Manager i wasn't and still am not able to install CWM. From the info shown in german, i would translate the following german text:"Bei der Ausführung von privilegierten Kommandos ist ein Fehler aufgetreten!" to "An error happened on execution of privilegised commands"
And now i'm stuck on this and don't know what to do. Afaik i would estimate this being a fault of SU which was installed with the ROM, but i really don't know it.
i would appreciate any help or hint.
Thx
Kai
Hi,
Unfortunately, ROM manager does not work with magldr...
If you want to use it ,you need to install cLK.Have a look at my sig...guide number 2
Did you buy CWM?("Having bought CWM i thought it would be easy to flash the HD2 to another mod,")
Should not have to pay for it.
All is in the guide..
malybru said:
Hi,
Unfortunately, ROM manager does not work with magldr...
If you want to use it ,you need to install cLK.Have a look at my sig...guide number 2
Did you buy CWM?("Having bought CWM i thought it would be easy to flash the HD2 to another mod,")
Should not have to pay for it.
All is in the guide..
Click to expand...
Click to collapse
Ok, so i have to switch. Actually reading your guide. Thanks a lot!
Yes, i bought CWM, because i think it's worth paying a few bucks to the coder
Greets
Kai
No, you don't have to switch, the only difference is you manually enter cwm rather than the phone automatically entering cwm for you. just don't use rom manager. Read the cwm thread, in android nand development thread all info is there including free download links.( I'd be REALLY unhappy at whoever sold you cwm!, and in fact isn't it released under a freeware license? Making resale illegal?)
samsamuel said:
No, you don't have to switch, the only difference is you manually enter cwm rather than the phone automatically entering cwm for you. just don't use rom manager. Read the cwm thread, in android nand development thread all info is there including free download links.( I'd be REALLY unhappy at whoever sold you cwm!, and in fact isn't it released under a freeware license? Making resale illegal?)
Click to expand...
Click to collapse
There is a free and paid version of ROM Manager in the Android market. The free version works good, but the paid version has added benefits of course, like installing from QR code, checjking for OTA ROM updates, aqnd more avaliable ROM downloads.
samsamuel said:
No, you don't have to switch, the only difference is you manually enter cwm rather than the phone automatically entering cwm for you. just don't use rom manager. Read the cwm thread, in android nand development thread all info is there including free download links.( I'd be REALLY unhappy at whoever sold you cwm!, and in fact isn't it released under a freeware license? Making resale illegal?)
Click to expand...
Click to collapse
There is a free and paid version of ROM Manager in the Android market. The free version works good, but the paid version has added benefits of course, like installing from QR code, checking for OTA ROM updates, and more available ROM downloads.
T-Macgnolia said:
There is a free and paid
Click to expand...
Click to collapse
Op said he "bought cwm", not rom manager, I was responding to that.
samsamuel said:
Op said he "bought cwm", not rom manager, I was responding to that.
Click to expand...
Click to collapse
Sorry Guys, i think i've mixed it up!
Of course i bought RomManager not CWM.
Greets
Kai
samsamuel said:
No, you don't have to switch, the only difference is you manually enter cwm rather than the phone automatically entering cwm for you. just don't use rom manager. Read the cwm thread, in android nand development thread all info is there including free download links.( I'd be REALLY unhappy at whoever sold you cwm!, and in fact isn't it released under a freeware license? Making resale illegal?)
Click to expand...
Click to collapse
OK, thanks for that hint!
Which thread am i supposed to read? This one?
http://forum.xda-developers.com/showthread.php?t=898913
Can't find "the" cwm thread.
btw. first i've to take care of my Desire HD, cause mike is updating 5.1.4
http://forum.xda-developers.com/showthread.php?t=840040
samsamuel said:
No, you don't have to switch, the only difference is you manually enter cwm rather than the phone automatically entering cwm for you. just don't use rom manager. Read the cwm thread, in android nand development thread all info is there including free download links.( I'd be REALLY unhappy at whoever sold you cwm!, and in fact isn't it released under a freeware license? Making resale illegal?)
Click to expand...
Click to collapse
Hm. liking the way it works on Desire HD, is there a reason not to switch to clk and stay with magldr?
I would like to play with the HD2 as much as possible, so it would be really fine, if i was able to switch between roms as easy, as in Desire HD, working with rom-manager and CWM.
Dave-Kay said:
Hm. liking the way it works on Desire HD, is there a reason not to switch to clk and stay with magldr?
I would like to play with the HD2 as much as possible, so it would be really fine, if i was able to switch between roms as easy, as in Desire HD, working with rom-manager and CWM.
Click to expand...
Click to collapse
Hi,
For me I'm using magldr and I find it easy switching between ROMS,because I am used to it.I cannot vouch for clk ,because I have not tried it yet,but I'm told it is much more native to android,therefore more user friendly.
If I were you,stick with magldr for a while,then change to see the difference..
For me I'm using magldr and I find it easy switching between ROMS, because I am used to it
yaely_ole said:
For me I'm using magldr and I find it easy switching between ROMS, because I am used to it
Click to expand...
Click to collapse
Yeah but with MAGLDR you have to boot into MAGLDR, then into CWM, then select to do a backup, then select to wipe your data your cachje and delvik cache, then go and select to flash your ROM. With cLK you install ROM Manager from the Android market then just open ROM manager and select "Install ROM from SD Card" then pick the ROM from SD card. Then a window opens in ROM Manager and you check the box to :"Backup Existing ROM", "Wipe Data and Cache", and "Wipe Delvik Cache". Then you tap ok and it automatically boots into CWM and executes all the commands then flashes the ROM and reboots the device when it is done flashing the ROM. Remember you did all the set up in Android itself. Plus ROM Manager has like a hole bunch of other options. You seee ROM Manager is a interface for CWM in Android. You can even use ROM manager to flash CWM, I just flashed to CWM version 3.1.0.0 tonight with it, and gues what that is because it told me it was a update avaliable for CWM when I opened ROM Manager. Not to mention the fact you do not have to worry about making CWM the right partition size anymore cuase cLK sets the partition sizes when you flash, it is like auto pilot. But the best of all you can actually turn your HD2 off and charge it using cLK, you don't get that with MAGLDR.
T-Macgnolia said:
Not to mention the fact you do not have to worry about making CWM the right partition size anymore cuase cLK sets the partition sizes when you flash, it is like auto pilot.
Click to expand...
Click to collapse
Hi,
So you can set the partition size in android?
Does that mean you can load a ROM without the use of a PC?
malybru said:
Hi,
So you can set the partition size in android?
Does that mean you can load a ROM without the use of a PC?
Click to expand...
Click to collapse
That looked quite strange to me. I had to choose right CWM first, before flashing the ROM. on my Desire HD i'm able to download the ROM with the DHD and afterwards flashing it directly from the SD-Card.
Yes, without using a PC. Dunno if it's possible like that on the LEO using CLK.
Bu i've got a Question about CLK. If using it, is it hard to switch back to a WinMobile ROM?
Switching back to winmo is the same for both magldr and clk,,,, flash your phones correct stock rom.
I can't add anything to the pros and cons of clk, I plain and simply can't get it to instal. I suspect its something left over from when I installed the android sdk and eclipse, followed by wp7 sdk , just can't get the command line to pass commands to the phone (required to initially set up clk)
Next time I clean reinstall my PC I'll try again, but till then magldr for me.(which is fine, I've always preferred doing stuff manually, automation takes the fun out of it for me)
malybru said:
Hi,
So you can set the partition size in android?
Does that mean you can load a ROM without the use of a PC?
Click to expand...
Click to collapse
From what I understand cLK sets the partition size when using it so you do not have to. I mean you can flash CWM via ROM Manager and it does not ask you what partition size you want, it just flashes it. Also you can download and flash a ROM just using ROM manager, you never have to touch a computer. Now granted the only ROM I see available right now is Hyperdriod and a Cyanogen Mod ROMs, but I am sure more will become available when more people switch to cLK and can use ROM Manager. Right now when I touch on Download ROM I see this.
Extras
Cool stuff (This gives me 2 choices for Superuser one says 2.3.6.1 cd and the other says 2.3.6.1 ef)
charansingh
Mods and Bacon for your phone ( I get 3 Cyanogen Mod choices 7.0.0, 7.0.0-RC4, and 7.0.0-RC2)
Hyperdroid
Hyperdroid is the InsanelyFast & Incredibly Smooth Custom Android ROM that will blow you away Awwsomeness! (I get 2 choices HyperDroid-GBX-v12 and v11)
Google Apps
Add-on for AOSP ROMs, such as CM (I get 4 choices here 20110503 Universal, 20110307 Universal, 20110120 Universal,20110115 Universal, 20110114 Universal, but the 20110120, 20110115, and 20110114 says they are for 2.3.2 and no longer supported.
samsamuel said:
Switching back to winmo is the same for both magldr and clk,,,, flash your phones correct stock rom.
I can't add anything to the pros and cons of clk, I plain and simply can't get it to instal. I suspect its something left over from when I installed the android sdk and eclipse, followed by wp7 sdk , just can't get the command line to pass commands to the phone (required to initially set up clk)
Next time I clean reinstall my PC I'll try again, but till then magldr for me.(which is fine, I've always preferred doing stuff manually, automation takes the fun out of it for me)
Click to expand...
Click to collapse
Hey San have you tryied adding the directory to your "Enviroment Variables" on your computer. This will allow you to open a command prompt up that is in the directory you need to get CWM flashed. Click on my guide and scroll down to post#3 where I expain how to flash CWM with cLK and I give full details.
Hi,
I have troubles with my HTC HD2.
Im trying to install this version
http://forum.xda-developers.com/showthread.php?t=933951
(25.May.11][MAG/cLK]TyphooN CyanogenMod 7 Nightly v3.3.3[2.3.4][A2SD][tytung r10]
This is my installation step by step.. So...
- Install HSPL 2.08
- Task29
- Radio
- Magldr 1.13
- CWM (3.0.2.5) 150MB
-partition SD Card 1024 and 0
-ext-sd format
- installation of the ROM
- fix permissions
- reboot
And my Android stuck at GO GO GO screen. I dont know what I have done badly, because if I use CWM 3.2.0.0 Android boots nicely, but I hear RoboVoice when I try to call. On the other hand if I try to install the old version of Android via CWM 3.0.2.5 everythink works. I mean the same version of Android but 3.0.6. - no RoboVoice, no bugs with falling applications.
I want to have updated system, but it is impossible for me and I dont know why.
So what is the problem?
thank you
Some details:
SD Card Kingston 8GB class 4
Windows 7 64-bit
maybe this will help ?
http://forum.xda-developers.com/showthread.php?t=945427
Yes, thank you.
But I think the problem is somewhere else. I really keep tutorials and manuals. The problem must be at version of Android. One big different between new and old version is AD Recovery CWM. For old it is for example 135MB, for new version it is 150MB. So I use 150MB as they write at thier thread and it is still not working.
If I use 3.2.0.0, Android(3.3.3) boots, but with bugs.. RoboVoice and so on..
If I use 3.0.2.5, Android freezes at GO GO GO.
Hey,double-confirm if u ain't flashing a CLK build as MAGLDR?
Try using this CWM flasher...it contains version 3.0.2.8...All u have to do is connect phone 2 pc in usb flasher mode (MAGLDR), run the setup.exe as admin, select 150MB partition, flash away...
Alternatively u can just copy out the recovery-raw.img file out and use it 2 replace the recovery-raw.img in the official 3.0.2.5 folder which was recommended in the ROM thread and flash away...
P.S. Try both methods first (performing a task29 each time) and if it still doesn't help then its best to seek help in the ROM's thread...Get help from its users.
MAGLDR of course
Ill try CWM 3.0.2.8. Thank You
99TheDude99 said:
Yes, thank you.
But I think the problem is somewhere else. I really keep tutorials and manuals. The problem must be at version of Android. One big different between new and old version is AD Recovery CWM. For old it is for example 135MB, for new version it is 150MB. So I use 150MB as they write at thier thread and it is still not working.
If I use 3.2.0.0, Android(3.3.3) boots, but with bugs.. RoboVoice and so on..
If I use 3.0.2.5, Android freezes at GO GO GO.
Click to expand...
Click to collapse
First of all are you using cLK or MGLDR?
For robo voice, it is only on the first call, just reboot, call anyone or any number and just hit end call.
If you have GO GO GO screen, you are using MGLDR, so why are you repartitioning your ROM? The MGLDR, already comes with its own partition built in, no need to change anything.
Im using MAGLDR, not cLK.
Ill try your tips, so wait for my report
And what about falling applications?
I click on Internet application or Facebook app. Maybe 3 seconds it works then falls to Home Screen. Thank You
I have used CWM 3028. The problem with RoboVoice is resolved.
However, I have troubles with applications. Internet, Facebook etc.... still falling when I click on them. But at version 3.0.6 everthing works OK.
I dont know why ..
I tried everything
Dear ALL,I'd like to know which way to install the cm7 rom better.I use magldr to install ,but follow this way there is only same rom can work.Now I use cm7 3.4.0,if I install 3.5.7,the device restart all the time,can't go into the system.TKS
Hi are you trying to run the stock cm7 on HD2? I don't think the cyanogen team has ported cm7 for the HD2 yet... But fortunately a lot of xda guys here have customized cm7 for the HD2. Check out the NAND forums and pick a ROM. Besides cm7 there are also HTC sense/MIUI ROMs available, and many of them are working through Magdlr (as many ppl on these forums can assure you...). Just choose a ROM and follow instructions on that page.
any suggest
likewei92 said:
Hi are you trying to run the stock cm7 on HD2? I don't think the cyanogen team has ported cm7 for the HD2 yet... But fortunately a lot of xda guys here have customized cm7 for the HD2. Check out the NAND forums and pick a ROM. Besides cm7 there are also HTC sense/MIUI ROMs available, and many of them are working through Magdlr (as many ppl on these forums can assure you...). Just choose a ROM and follow instructions on that page.
Click to expand...
Click to collapse
I am following this instruction"http://forum.xda-developers.com/showthread.php?t=933951",But I can't install 3.5.7,whenever I install 3.5.7 rom,the devise retarte again and again.I don't know Why.Can you give me a hand?TKS
Haha I'm using that ROM too. Alright I'm not sure what you did to get Magldr running on your phone, but I suggest you do a total reset... Ok here's how:
1. Flash 2.08.HSPL, get the file follow instructions at http://forum.xda-developers.com/showthread.php?t=611433. Just download HSPL 4 (the latest one) and flash to 2.08.HSPL
2. Flash your radio to 2.15.xxx, if your radio is not already 2.15.xxx. See http://forum.xda-developers.com/showthread.php?t=611787
3. Now download the HD2 NAND toolkit. Technically you don't need this, but it makes things a lot easier. http://forum.xda-developers.com/showthread.php?t=1090783
4. Open the toolkit. Do a wipe (Task 29)
5. Click Install MAGDLR and follow instructions
6. Select MAGLDR Repartition. Use 150mb + 5mb cache. The size of the partition depends on which ROM you're using, but for this particular ROM use the settings I just mentioned.
7. (hmm actually I've nvr really tried this myself because I'm using cLK, so I'm not sure if Clockworkmod recovery is already installed at this point. Just turn on your phone and hold the power button to get into the MAGDLR menu, then select AD recovery. If CMR loads then pls skip this step) Select MAGLDR update recovery and update CMR
8. Alright now you can put the ROM file (a .zip file) into the SD card and use the install zip from sdcard option to flash, then everything should be fine
Hopes this helps
I have successfully installed TyphooN_CM7_v2.9.2-cLK about 8 motnhs ago & been using it but fancied a change.
I am lucky enough to have two HD2's so decide to try installing another nand on the other phone.
I tried TyphooN_CM7_v3.7.0-cLK & DFT_LEO_NAND_Android both using Task 29 & using CWM with CM7 & the USB flasher (as per instructions on the page) for the DFT one. No luck with either they both install but I get an error "Process system is not repsonding" which won't go away with the DFT one & its just keeps booting into Magldr with the CM7. I have installed NexusHD2-Gingerbread_V2.9_NAND_(Android-2.3.5) which is working & installed fine but just can't get either of the other two to work.
I wanted the CM7 to upgrade the current Typhoon I have a wanted a Desire nand on the other phone as a change.
Any ideas what I'm doing wrong?
Help much appreciated
Thanks
Edit:
Following this thread for the CM7 http://forum.xda-developers.com/showthread.php?t=933951
& this for the Desire nand http://forum.xda-developers.com/showthread.php?t=893620
Till now you are used nand android ... so you have the important things (HSPL2.08, radio 2.15.50.14, MAGLDR).
And you installed NexusHD2-Gingerbread ... this means that everything is OK.
I think you can try to download the other things for CM 3.7.0 again.
I've had problems with installing when the .zip is corrupted or something ...
With the typhoon version I would check to make sure that you downloaded the magldr version and not the clk version as it is the magldr that you keep booting into. If you try installing clk to a magldr loader it will not load and just go into magldr loader. With dft one it is probably a bad download or perhaps it is that the rom is an older rom.
There is a lot solutions/problems. Which rom u try to install? Magdlr or clk?
Sent from my HTC HD2 using Tapatalk
Same here
I have exactly the same problem, the only zip NANDs i can install are NexusHD2-Gingerbread. All others install ok but when i reboot it states "Kernal Open Failed" If i install other NANDS via USB flasher they seem to install fine, but then i no longer have AD Recovery Clockworkmod, which is very useful for backups. I appreciate that this is an additional statement but i also have the issue of my phone rebooting 6-10 times a day, hence wanting to change my NAND for testing. I have today however made a complete re-install and using a different SD card, still can't load other ZIP NAND's though.