I just updated ROM on my US HD2 to the 3.14... version yesterday and noticed the "WiFi Router" icon is gone. Internet sharing icon is still there so bluetooth and usb sharing work. What happened? Also, when I download the program and install it from card to device, it installs as if OK, but the program does not appear anywhere as an application. But I am able to uninstall it. Would like to have HD2 as a potential hotspot - any help appreciated. Thanks.
check in the Windows folder if there's a file CMInternetSharing.exe - it is the WiFi Router exec, if it exists, copy attached link anywhere in the Windows\Start Menu folder
P.S. the "WiFi Router" app comes with the stock 3.14 ROM (the generic one, not sure about T-Mobile one)
or you can use a custom ROM which will most likely have it preinstalled..
example: the ROM i am using currently Dutty's ROM V18
Thanks guys. Believe it or not, the wifi router icon showed up the next day - it was not there when I wrote the request for help. There must be a delay in the process on the HD2. I noticed that Skype was also removed after updating to V3.14 from T-MObile. I wonder what else they left out.
Thanks all.
Related
Hi,
I've got an Orange M500, upgraded with the Imate ROM 1.12.00WWE - ever since I upgraded the ROM, I can connect to my Orange GPRS service fine, however, if I disconnect then try to reconnect again, the connection fails. I have to turn on flight mode, then turn on the radio again in order to get GPRS access.
I've tried upgrading to Radio 1.13.00, but still no joy.
Any ideas?
Mine does that and I have the original ROM. A bit of a pain isn't it.
Here's the fix
This was originally posted by Peter for the imate JAM.
I just installed it and it's working like a charm.
1. Download the older version of caller-id from:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Caller ID/IA_CallerID_1.20_WWE.CAB
and transfer it over to your device. Any directory is Ok. I used ActiveSync to put it into the My Documents folder.
2. Remove the file IA_CD-Startup.exe from \Windows\Startup on your device.
3. Rename iacontacts.dll to something else (e.g. old-iacontacts.dll). This file is in the \Windows directory of your device but is hidden. However you can rename it using your PC. Open Windows explorer, and navigate to Mobile Device>My PocketPC>Windows.
4. Rename displayCID.dll to something else (e.g. old-displayCID.dll). Access it via your PC the same as for the previous step.
5. Soft reset
6. Run the CAB file on the device - just tap on it.
7. Soft reset.
That should do it.
I have the same GPRS problem too. However, the link you provided just asked for the password to access that ftp. Hey, acs540, do you know the password or do you have that CAB file? Thanks in advance.
usernameassword is xda:xda
The fix in this post seems to refer to caller id!?! I too get the gprs connection problem and have made it better with different roms but not found a sure-fire fix.
If anyone has a patch that fixes this, please post it!
GPRS now working
Hi,
Finally I tried, or at least halfway, After I removed the CallerID everyone is talking about my Qtek9090 now works flawless regarding GPRS.
This is very interesting that Caller ID software makes GPRS not working
Anyway, now I can start and stop GPRS several times, I have now toggled it 10 times without any problem.
Before I had to reset/toggle radio to make it reconnect after a disconnect.
Thank you all that has investigated this problem!
One last thing, Do you really need CallerID? :roll:
Br
Lars
I don't use Caller_ID, but Photo Contacts Pro.
Did you also try to change GPRS slot (Class 8 or Class 10) in GPRS settings?
XShell said:
I don't use Caller_ID, but Photo Contacts Pro.
Did you also try to change GPRS slot (Class 8 or Class 10) in GPRS settings?
Click to expand...
Click to collapse
Well, yes, I have changed to Class8 (4R1T), default was (I belive) Class10
Br
Lars
for wifi issues try using this
Did you test it?
When i first saw this post i didn't bother to reply but seriously now?
a storage cab file fixes a wifi driver?
And another annoying thing about the post is the lack explanation.
whats this for????
Answer
This is simple Wlan Manager
I packed it to a cab for all of you to test
works ok!
Great xplode! Thanks, I have installed your cab file and my WiFi issues have gone!!
I run Helmi's WM6 rom with xplode's HTC_CommManager from his HTC Cabs_Xplode31.10.2007 series.
Without xplode's WLAN Manager cab file from this thread I had the WIFi issues as also posted by other members:
1- After a soft reset WIFi would not connect (workaround was to start the WLAN Manager, turn on WLAN Manager [WiFi would still not start], go to the HTC CommManager and start WiFi from there) - now WiFi starts and connects directly from HTC Comm Manager!
2- After switching off the device, WiFi would not reconnect automatically when switching back on (workaround was to switch WiFi off and on in HTC Comm Manager) - now WiFi reconnects automatically when switching on the device again.
Great work there, thanks again!
Weird... It won't install on my QTEK 9090, Xplode's rom...
Oh well, clicking twice never killed a man ;-)
i also have same problem... it says that instalation was unsuccessfull
I have many softs instaled... could one be causing the issue?
ok then download the first zip then copy the extracted exe to windows forlder, and thats it
WiFi Cab
Hi - I replaced the WLanMgr.exe file (had to switch on Flight Mode before it would allow me to do this) but it did not fix my WiFi issues.
It did however give me the version of Wireless Manager I had when I was running WM2003 - which I preferred anyway......
Using Helmi's Rom and Xplode's HTC Comm Manager - 6 buttons.
Prille said:
Weird... It won't install on my QTEK 9090, Xplode's rom...
Oh well, clicking twice never killed a man ;-)
Click to expand...
Click to collapse
Me neither...
Even with the .exe I can't Wi-Fi on WPA-PSK working properly...
well even without this fix i am working every day with wifi wpa-psk tkip without any issues, so i dont know what is the problem in your devices
the only issue i have is for turning on wifi (the good old driver bug since earlyer wm5)
Oh well but wifi works perfect for me also, every day on WPA2-PSK but it's as you say XPlode, just the enabling that takes 2 steps... besides that, everything very fast...
RE: Install unsuccessful
I manage to extract the file to \windows, but it says that HTC WLAN install was unsucessful.
Any hope?
Any hope for WPA2?
sorgeangel said:
I manage to extract the file to \windows, but it says that HTC WLAN install was unsucessful.
Click to expand...
Click to collapse
I had the same result with my SX66 and no one seems to know what causes this cab file to report unsuccessful on install. Especially Xplode who is usually so knowledgeable on these matters!
But now that I have started enabling WiFi in system-connections-turn on WLAN (as opposed to connection manager), it SEEMS to be working fine without the cab file???
I install in htc touch the followings programms
Skype
ewallet
Pocket CM Keybord
sdkCerts + Windows Live 10.6.0034.0800 fixed
Now i go to Comm manager and i press the button for WLAN. The WLAN is dead. When I go to the Setting --> Connections the icon WiFi is disapear.
Please help me....i have bought the mobile 3 days ago with sim unlock,
Please help me
Uninstall everything you can, if it doesn't help, do a hard reset. After installing each CAB, try to use WiFi.
Hi i have the same Problem.
I instlled diverent Rom. Always the same. I cannot activate the Wifi.
What else can i do? Would another Radio Rom help?
I have done many times hard reset but nothing.
archonw? You have install different ROM and still cannot activate WiFi? Have yοu try original ROM?
I THINK I FOUND THE SOLUTION. In folder My Device -->Windows there are some files
There is a file Wrlsmgr. When i open this file then i see something like the Comm Manager. In this programm there is bluetooth and phone button. When i press the button i can activate or deactivate the phone or the bluetooth. I see then that there is no button for WLAN. I go to the files about bluetooth and phone and i see the followings files.
BluethSetting.htm
Bluetooth Explorer
BluetoothSetting.dll
phone.dll
phone.dot
phone.pwi
PhoneSetting.dll
Then I go to the files about wireless and i see the following files.
Wireless LAN
wireless.bmp
WirelessLAN.htm
WirelessService.dll
WLANSettings.exe
WLANSettings.exe.0409.mui
Do you see something strange? I see 2 thing. There is no a file WLANSettings.dll like bluetooth and phone and what is this WLANSettings.exe.0409.mui strange file?
If some want help me please i would like to see if my files is the same as the files in his phone.
Thank you very much
Hey after flashing my tp2 (Energy rom titanium w/manila 2.1 june 19 2010 rom) and installing a few cabs i cant get a connection to the share my internet connection by usb on my pc. I don't know if it was the rom or the cabs i installed. (Im using T-mobile data, epc.tmobile.com)
Under the registry HKEY_LOCAL_MACHINE/Comm/InternetSharing in the settings folder there is a file named: "Default", data: "value not set", Type REG_NONE. Under the status folder that same file is there along another NAME: Enable, Data0x00000001(1), Type REG_DWORD. This is when i have the phone connected to pc and using internet sharing. I think my registry might be messed . The device is recognize that is trying to access the internet on the PC but it just doesn't establish the connection. Can anyone help me out? Is there such thing as a stock internet sharing cab or if some one sent me their registry files would that fix the problem? Thankx
Hi,
Ive checked the forums but i cannot seem to find a thread that answers my question. Maybe this has not been asked or people have incorrectly titled their threads.
Ive just updated to the latest radio (no issues).
Changed my ROM to Chuckys GTX lite (no issues). Also used DUTTY Creme V4
I have then booted Google's android, using Darkstones 7/8/10 build of Froyo.
It boots into Android fine but upon start up i always get the message:
'sim card changed' then 'sorry! The application settings (process com.android.settings) has stopped unexpectedley. please try again'
which i then click force close
Im also having trouble finding the correct software to use USB mode to transfer my files to the phone in Android - I think i now have to use HTC Sync but HTC's site asks for a serial,.... which obviously i cannot download. I just seem to default to 'USB Debugging' which does nothing for me.
An help would be appreciated
Thanks
i also can not connect my HD2 with this build via USB...
any idea?
Currently using ChuckyDroidROM and the FroyoStone 07.08.2010 build, installed "Automount" from the Android Market, disabled "USB Debugging" and set Automount to enabled, and it works perfectly fine now, Windows XP, Windows 7 and Ubuntu 10.04 all see the microSD card and can access it perfectly
iiNFAMOUS CHRiS said:
Currently using ChuckyDroidROM and the FroyoStone 07.08.2010 build, installed "Automount" from the Android Market, disabled "USB Debugging" and set Automount to enabled, and it works perfectly fine now, Windows XP, Windows 7 and Ubuntu 10.04 all see the microSD card and can access it perfectly
Click to expand...
Click to collapse
Amazing, thank you very much, been serching for something like this for hours. You have made my day!!
has anyone else had the error in my OP, I dont know if its having any effect on the OS but its good piece of mind to know what it is.
Cheers
thanks a lot...gonna try right now...
great...it works...
now I can access my SD card, but when I paste something and then disconnect the USB cable, nothing appears in File Explorer... For example: I tried to make new folder "music"and to put there some music files. I did that, but then I couldn't find the folder... Any suggestions?
muscular said:
now I can access my SD card, but when I paste something and then disconnect the USB cable, nothing appears in File Explorer... For example: I tried to make new folder "music"and to put there some music files. I did that, but then I couldn't find the folder... Any suggestions?
Click to expand...
Click to collapse
Be careful about transferring files to your sdcard via android...
there's a reason DarkStone probably disabled it...
I was on older builds that supported this and ended up messing up the filesystem of the card... nothing a "repair without formatting" can't handle, but still takes some time to figure out...
Im running HSPL3, ChuckyROM GTX Lite, JMZ DualBoot and Android 2,1 i believe... The Desire one w. sense...
Everything works perfectly, but theres no connection trough the USB only charging.
Tried to turn op USB debugging and install Automount (No luck)
Alså tried to change the connect to pc setting fra just chargin to all of the other options... Still no luck
Anyone have any ideas?
I'm having same issue as OP.
Went from Desire v5 to Froyo darkstone (7/8), and no data connection, and same error "Sorry! The application Settings (process com.android .settings) has stopped ..etc when I try to accept the "Sim card changed " notification.
When I try to play with APN settings, it just constanlty says : Connection failed due to incorrect APN settings on Mobile Network screen.
There was a warning with this build about limited or no data, but didnt think it would not work at all, I had a cracking down rate with Desire V5, but would like to carry on running this Froyo build.
Any help?
To OP:
Just seen the following in the build thread:
Update:
a) APN settings crash, I will fix this asap.
Last edited by DarkStone1337; 8th August 2010 at 12:03 AM..
Re-EDIT!
Check this: worked for me..... http://forum.xda-developers.com/showpost.php?p=7514490&postcount=1179
Lol, I deleted the apn settings before the backup step. Lost my o2 internet now. Anyone had the issue of the mobile phone signal icon dropping every min it so. It will show full or half etc signal then the next min will show no signal bars then after another min or so full or half etc again. I can still make calls when the phone shows no signal though. This is with chucky gtx lite and darkstone latest froyo build. Same was with duty Rom also.
Another issue I've found is the screen going sort of black and white inverted and really bright. Anyone else got this if just me, I have to reboot the phone to fix. It's only happened twice though in a week.
Sent from my HTC Hd2 Android
using XDA App