Hi all,
how and can i flash a rom from the sd card on my acer s200 f1.
which rom is unimportant as at the moment my handset does not boot. it does not respond from a usb flash or a hard reset.
can anyone offer any advice?
billy
Related
(soory my english) I updated the XDA 1.2 ROM throught the USB cradle, but before I overwrited my HDD by utility XDArit.exe so when I started flashing the rom, on the XDA was written "Update your rom" or something, but the process stoped cause the update program can finded the souce XDA rom 1.2 file. So I try the rom write to the SD card throught the card reader, go to the boot menu, updated rom, but the sign "Update your rom..." was still there. I made hard reset, soft reset, I got the sim out, nothing. The sing was still there. So I made upgrade T-Mobile rom 2003 throught the xdarit.exe a now I cant power on my xda. Boot menu is still off. When I get the XDA to the cradle, there is bad sign "Update your rom"... and some points...
Can you help me? Thank you very much.
You need to be a little more concise with your problems but from what I can gather....get an sd card, xdatools, and a rom of your choosing and read a lot more posts before doing anything else.
Once you've done that...burn an image onto the sd card and place it into your device. Boot it up and you should be oka.
Thank you, It goes super!!! XDATOOLS - the best program!!!
i have Qtek 1010 i did upgrade from PPC 2000 to 2003 in the middle of the upgrade 82% it get stuck .. now my qtek is not working ..
i have SD card .. but i dont have a backup for my previuos OS ..
any help will be appreciated..
reagrds to all
QUsai
How were you doing the upgrade, PC install or the SD card boot loader
method? If was the PC install trying using the SD card boot loader method.
For more info. on the SD card boot loader method just do a search on the subject in this forum.
HTH
i changed my charmer's rom with a wrong one,and now my mda is dead...the pc cand recognize it to change the rom...the only solution is the flash from the sd card...please someone help me i am disperate...how can i do this?
Can you enter bootoader mode at all?
Hi
Have been flashing roms all the time without issue.
I've tried to flash my mobile and get to HSPL boot screen but it doesn't recognise the leoimg.nbh no matter which rom i use
It says 'loading...' on a grey screen then goes to the red/green/blue screen and has 'serial' at the bottom.
i've tried upgrading hspl to 1.66 and also mtty format, oth worked fine, I now just can't flash any rom to the phone
Can anyone advise how I could sort this? could send paypal for your time if you can help me sort it
Cheers
ok
format again microsd to fat32,microsd not microsdhc,
charge your battery,must bt shure your rom its ok not corupted
Hi
Have tried all of this but still no joy at all.
Does anyone else have a suggestion or is there another process that can be used for flashing if a direct flash from memory card doesn't work but the phone is formatted?
Thanks in Advance
Adam
In case anyone has a similar problem:
I installed drivers for phone in bootloader USB mode from the mtty thread.
Set the phone to bootloader and plugged in usb and was able to flash from PC without having to be in winmo
I still can't flash from card but as this way works, it's not an issue.
Cheers
hai friends
my phone got struck at stick togeather. i read the forums and most of them say to use task29. my phone is hard spl -ed. when i load into bootloader and connected to pc, my system doesnt recognize & also usb is not showing in bootloader. i just want to know whether is it possible to use task29 via sd card. kindly inform us. have a nice day
no unfortunately it isn't. you should try your stock rom from sd.