Database Users

So, I'm finally tired of T-Mobile's ROM

It keeps spazzing on the simplest things, not letting me use WMPlayer without restarting, and basically pissing me off to extremes never felt with my Dash.
I really want to try WM6.1, but I'm not so into losing my InternetSharing (that's helped me at the oddest times) or adding a ton of programs that come with a ROM that I'll never use.
So basically I'm looking for the cleanest ROM possible without going to Windows and begging for an update.
**Shiny phone buttons a plus.

you should try ttrans opentouch, he has some pretty good roms heres a link - http://forum.xda-developers.com/showthread.php?t=377939

Phawkes said:
you should try ttrans opentouch, he has some pretty good roms heres a link - http://forum.xda-developers.com/showthread.php?t=377939
Click to expand...
Click to collapse
Yeah, I think I might seeing as I lost the only reason I wasn't resetting my phone (SMS message pac-rat).

try open touch 4.0 its good...i hateee the tmobile rom..

I'm using OpenTouch 4.0 Biggie and I love it. It has been very stable and very fast for me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/URL][/IMG]

Same here!

jreezee said:
I'm using OpenTouch 4.0 Biggie and I love it. It has been very stable and very fast for me.
[/URL][/IMG]
Click to expand...
Click to collapse
So I tried Open Touch 4.0 for about a week and MMS, so it's back to the what else to use stage. Right now I'm using Carbon, but not being able to see the bottom bar kinda bugs me.
Suggestions?

Try this
QueenofSpades said:
So I tried Open Touch 4.0 for about a week and MMS, so it's back to the what else to use stage. Right now I'm using Carbon, but not being able to see the bottom bar kinda bugs me.
Suggestions?
Click to expand...
Click to collapse
You could try the Just2Clean by ivan. I think the zcink edition has internetsharing. It is BASIC, nothing but what you need for the phone to function; not even a calculator.
WARNING: Your phone has to be Hard-SPL and it flashes from the SD card.

@ bottom bar: just delete shortcut from startupfolder vjatodaytoggel.ink i guess
@ internetsharing und working MMS - use ITsPapaBlackWeather!
good luck

pseudoproto said:
You could try the Just2Clean by ivan. I think the zcink edition has internetsharing. It is BASIC, nothing but what you need for the phone to function; not even a calculator.
WARNING: Your phone has to be Hard-SPL and it flashes from the SD card.
Click to expand...
Click to collapse
What's that, how do you do it, and how do you check and see if it's already been done?

QueenofSpades said:
What's that, how do you do it, and how do you check and see if it's already been done?
Click to expand...
Click to collapse
Here is the link for the Hard-SPL
It basically unlocks your phone and overrides the security check done while flashing. Just follow papamopps' instructions and you can flash nearly any Wing/Herald ROM you like.
You can follow the instructions for flashing by following this link Just2Clean.
papamopps said:
@ internetsharing und working MMS - use ITsPapaBlackWeather!
good luck
Click to expand...
Click to collapse
This looks like a blatant plug to me Here's the link for ITsPapaBlackWeather. It is a nice ROM also.

i have this application that makes youtube work with windows media player its called "HTC STREAMING MEDIA.CAB" i dont kno how to upload it to the site s0o hit me up at [email protected] for it, you basically install it and then go to the youtube mobile site and click watch video and windows media player pops up and says buffering and it buffers realli fast over the T-Mobile Edge network and then after it buffers to 100% its plays the video.

rifinyc said:
i have this application that makes youtube work with windows media player its called "HTC STREAMING MEDIA.CAB" i dont kno how to upload it to the site s0o hit me up at [email protected] for it, you basically install it and then go to the youtube mobile site and click watch video and windows media player pops up and says buffering and it buffers realli fast over the T-Mobile Edge network and then after it buffers to 100% its plays the video.
Click to expand...
Click to collapse
And what does this have to do with this thread?

rifinyc said:
i have this application that makes youtube work with windows media player its called "HTC STREAMING MEDIA.CAB" i dont kno how to upload it to the site s0o hit me up at [email protected] for it, you basically install it and then go to the youtube mobile site and click watch video and windows media player pops up and says buffering and it buffers realli fast over the T-Mobile Edge network and then after it buffers to 100% its plays the video.
Click to expand...
Click to collapse
That really didn't help me much, but thanks for the info. I'll get at you about that after I get this stupid phone to send MMS.

QueenofSpades said:
So I tried Open Touch 4.0 for about a week and MMS, so it's back to the what else to use stage. Right now I'm using Carbon, but not being able to see the bottom bar kinda bugs me.
Suggestions?
Click to expand...
Click to collapse
What bottom bar do you mean? The one on the Carbon BG? Or the screen bottom bar? Did you run the network wizard?

QueenofSpades said:
Yeah, I think I might seeing as I lost the only reason I wasn't resetting my phone (SMS message pac-rat).
Click to expand...
Click to collapse
Get Jeyo Mobile Companion it will back up your SMS mssgs and you can restore them later.. I LOVE IT..

john94si said:
Get Jeyo Mobile Companion it will back up your SMS mssgs and you can restore them later.. I LOVE IT..
Click to expand...
Click to collapse
or use pimbackup it is freeware!

[REMINDER] WiFi tethering problem fully solved

For those who don't know.. WiFi tethering works flawless now..
Download: http://www.multiupload.com/8HAAG90SA1 ( Htc evo framework blah blah blah)
Also download: http://android-wifi-tether.googlecode.com/files/wireless_tether_2_0_2-pre14.apk (Latest WiFi tethering app)
Now youre ready:
1. Download those files.
2. Connect you're phone- and mount your SDcard to your PC.
3. Copy fw_bcm4329.bin to your SDcard, Make a folder on your SDcard called Android.Tether.
4. Paste fw_bcm4329.bin Into Android.tether on your SDcard.
5. Uninstall older versions of WiFi tether on you phone.
6. Install the lastest version of WiFi tether. (NOT MARKET VERSION)
WiFi tethering works flawless now, without the need to set static ip and ping'ing.
Encryption works too
damn, i searched this forum to make sure no other threads about the same, but i only searched this forum and not apps & themes.. sorry for multi thread

this works with 2.1...? root/non-rooted device?
needs rooting, nevermind ;D

Excellent, thanks for posting this!
Didn't know it had been resolved

StrongOneX said:
damn, i searched this forum to make sure no other threads about the same, but i only searched this forum and not apps & themes.. sorry for multi thread
Click to expand...
Click to collapse
No problem, I orginally posted my thread in development, but my thread got moved to themes and apps. I guess it fits better in that section.
http://forum.xda-developers.com/showthread.php?t=697168

Huh?
Stil no response as to which version this works for (2.1/2.2), also, I'm running MCR which comes with Wifi Tether, is this problem existent in that or not?

alias_neo said:
Stil no response as to which version this works for (2.1/2.2).
Click to expand...
Click to collapse
People have reported in that it works on both Eclair and Froyo (at least DeFrost 0.6). Anyway we got an working in-built wifi tether on Froyo now.
alias_neo said:
also, I'm running MCR which comes with Wifi Tether, is this problem existent in that or not?
Click to expand...
Click to collapse
Wifi Tether on MCR doesn't work out-of-box, at least according to mine tests.
Edit: Corrected a quite obvious spelling error.

So why does MCR include it if it doesn't work?

alias_neo said:
So why does MCR include it if it doesn't work?
Click to expand...
Click to collapse
Ask Paul
I was also kind of "fuzzed" by that when I tried wifi tether on MCR, also that it doesn't work is a fairly known problem.

Sweet! It works now

Hmm... maybe not! An iPhone do see the AP but a Desire and a HD2 cannot

It works fully 100%, it's been confirmed numerous times. So problem is on your side, bud
What do you mean Desire can't see it? You have two Desires laying side by side?

Thx so much for this reminder.

vanja said:
It works fully 100%, it's been confirmed numerous times. So problem is on your side, bud
What do you mean Desire can't see it? You have two Desires laying side by side?
Click to expand...
Click to collapse
Yeah, I am at work with my colleagues around me (iPhone, iPhone, Desire and HD2) and the iPhones can see the wireless network and connect to it, whereas the Desire and HD2 cannot even pick it up.
If some phones can see it and others can't what do you think the issue is?

I know that the desire cannot see ad-hoc networks which this method is based on, explains the Desire but I dunno about the HD2.
Froyo's wifi tethering works in master mode though which is lovely and will work on all wifi devices.

I have a question : what type of wifi network is wifi-tether ? adhoc or infrastructure ? Does the phone act as an access point ?
Actually, it is not working a perfectly as it could. My laptop computer sees it as an "unsecured" network although WEP 128bits is enabled and password set. (and it's not a bug from the computer, there are other WEP secured networks available in the area which windows see as "WEP")

Read my post above, it's ad-hoc. WEP seems to work perfectly here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

it's optional man, if you don't want it you don't choose it...and there is a way to make it work for someone who wants it badly.
anyway, i just tried the new version and it works great, absolutely awsome on my desire with MCR3.1

oh ok, so that's why. must be some kind of admin restriction on my corporate laptop. my bad.

Poodlemastah said:
Read my post above, it's ad-hoc. WEP seems to work perfectly here.
Click to expand...
Click to collapse
lol, nice AP name at the top of the list
Btw - I can confirm this works fine on MCR r3.1.
Encryption/no encryption and the speed is great.

HTC sync 3.0

Did anybody tried the new htc sync 3.0 with htc hero on android 2.1? They say on htc official site that it's working on htc devices with android 2.1 but on web it's said that this update is just for htc wildfire. I cannot download it for a trial for the moment.

I think I got the answer and I will wait. By the way, HTC sync really sucks!

rapsass said:
I think I got the answer and I will wait. By the way, HTC sync really sucks!
Click to expand...
Click to collapse
Don't use it then! oh and it's just for the htc wildfire for now.

It should work for Hero too. Just not on Vanilla builds obviously
Alternative link:
http://www.multiupload.com/U0ZVKIZIR6

btdag said:
It should work for Hero too. Just not on Vanilla builds obviously
Click to expand...
Click to collapse
It works for the HTC Hero, just tested it.
http://www.multiupload.com/IQIPL4FATM (3.0.5387)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

very itunesque

That looks so much better than the old sync. Did you delete Sync 2 before installing? Did you have any problems or was it nice and easy? Are you on a stock ROM?
Duh ..... just looked at your sig - please ignore last question

peterc10 said:
That looks so much better than the old sync. Did you delete Sync 2 before installing? Did you have any problems or was it nice and easy? Are you on a stock ROM?
Duh ..... just looked at your sig - please ignore last question
Click to expand...
Click to collapse
I wasn't using any sync before hand but it's always wise to uninstall anything you have application wise before installing the new versions.

andrewb84uk said:
I wasn't using any sync before hand but it's always wise to uninstall anything you have application wise before installing the new versions.
Click to expand...
Click to collapse
Not true - if the application is written correctly it shouldn't matter whether you have an old version installed. It is incredibly rare than a new version of software will break older ones unless they explicitly state that it will (i.e. there has been a major code/structure change).

It is not a Microsoft update, so it won't break older code.

btdag said:
Not true - if the application is written correctly it shouldn't matter whether you have an old version installed. It is incredibly rare than a new version of software will break older ones unless they explicitly state that it will (i.e. there has been a major code/structure change).
Click to expand...
Click to collapse
It's not true. Well on forums I see people doing 'upgrades' to applications and I see people face problems all the time doing it this method.
Theres plenty apps there has been issues with including java/vmware/flash beta ...... et al.

andrewb84uk said:
It's not true. Well on forums I see people doing 'upgrades' to applications and I see people face problems all the time doing it this method.
Theres plenty apps there has been issues with including java/vmware/flash beta ...... et al.
Click to expand...
Click to collapse
When you consider how many of millions of people update their software like this and out of that you might get a few thousand with problems you're still talking a very minor amount. There is no need to uninstall every app you want to update. This would take ages. I don't care if you want to do it for every app you update but don't recommend this to others as its just going to put people updating software when they should be.
And i've never had a problem updating java, vmware or flash (even using the beta versions) from older versions to newer ones. Java used to leave behind the old ones but it never negatively affected a system (aside from filling up the hard drive). VMWare is worthless anyway (get VirtualBox - support the open source community). Flash is made by Adobe - of course its going to have issues - they make software for Mac's then break the software and release it for PC. Having said this I very rarely have an issue with software updates unless it is explicitly stated on their website that it requires you to uninstall before updating.

hi
I just installed the ver 3 but my hero is not connecting to my pc
any luck or other way to do it
i have performed the follwoing steps
1 installed htc sync 3 over 2.0.33 i had both the sync on my pc but ver 3 was not working, so i unstalled 2.0.33, tried again
no luck
2 then i unistalled ver 3 as well restarted my pc installed sync 3 again no luck
any idea how do we can get this to work
by the way on my hero just upgraded to villainRom ver 12
please advise

Dont hurry!
Hey guys,
The HTC Sync DOES and DO work with HTC Hero.
I did uninstall the previous version and drivers and installed the new one. Yes it does tell you that its not recognized and the HTC Sync is not found on your computer when the phone trying to search for it. But I left it connected to go and search on Google to find out why, Guess what .. It run by itself telling me that I have Hero phone and what I should call it!!
Now I am syncing my stuff and its just working fine, just leave it for 2-3 minutes and it show up by itself

sbsxaid said:
Hey guys,
The HTC Sync DOES and DO work with HTC Hero.
I did uninstall the previous version and drivers and installed the new one. Yes it does tell you that its not recognized and the HTC Sync is not found on your computer when the phone trying to search for it. But I left it connected to go and search on Google to find out why, Guess what .. It run by itself telling me that I have Hero phone and what I should call it!!
Now I am syncing my stuff and its just working fine, just leave it for 2-3 minutes and it show up by itself
Click to expand...
Click to collapse
Thats probably because its installing drivers and detecting the correct phone et al. Glad it works.

Oh, forgot to mention..... when u plug in your usb select sync from the menu...
Sent from my HTC Hero using XDA App

Greetings folks,
I am able to pick up mu phone ok but failes to see the sd card,
See the attached image for more info,
Rebooted phone and computer and also removed and replaced sd card.
Any one got any thing to help with this ?
Ps i am using SenseHero B5.1

Steven_belfast said:
Greetings folks,
I am able to pick up mu phone ok but failes to see the sd card,
See the attached image for more info,
Rebooted phone and computer and also removed and replaced sd card.
Any one got any thing to help with this ?
Ps i am using SenseHero B5.1
Click to expand...
Click to collapse
It might not work with that ROM, try asking someone to try it who is using that ROM to see if they get the same effect.

andrewb84uk said:
It might not work with that ROM, try asking someone to try it who is using that ROM to see if they get the same effect.
Click to expand...
Click to collapse
Yeah thought this so going to try the orange 2.1 rru,
Will report back later tonight.

I've tested it with VR12, it doesn't work. Tried it with 2.1 RUU and it worked.

[Q] USB to serial to Cisco Switch

Does anyone know if there is an app to use the Iconia's USB port to connect to the console port of a Cisco switch? I got connect bot, but it's more using something already connected. I'm looking for something to console to configure a fresh switch or troubleshoot a downed switch. Unless the hostname is "localhost" which i have not tried yet. I did not see anything out there about this, more just "i'm working on something". Any one here have any ideas?
Thanks.

Have u tried searching for a hyperterminal in the market. ive got a usb to serial for a rollover cable. Ill try it on my router tomorrow just to see what happens. Curious now lol.
Just found slick2usb in the market after searching for hyperterminal. It may be what u need
Sent from my A500

Thanks i will look at that tomorrow when i get home, as of yet i can't get my iphone to tether data correctly (next issue at hand). I will let you know the results and please let me know what you find out.

Good news....it works, mostly........a little buggy but I don't think this is the apps intended use. Plus I think my router is in rommon and I don't feel like fixing it lol Gonna send them an email to see if they'll implement full support for Cisco devices
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my EPAD using Tapatalk

Thanks man, i have not had time to check this out between school and work. It will probably be monday before i can check it out. I will post once i do. Once again thanks a bunch for testing it out.

Did you check this post? :
http://forum.xda-developers.com/showpost.php?p=16703609&postcount=23

@hatefuel19: I finally got the app installed. Once i rebooted the switch i could see the boot log but i could not send anything to the switch and see a response. Did you ever hear back from any correspondence with the developer?
@fincan: trying to do this without rooting.

I had the same issue and no nothing from them yet........have you tried it with a usb keyboard?
Sent from my A500 using Tapatalk

No i have not, however i just talked to the people who work at Network Operations regarding Cisco input format. Slick USB is sending the data in ASCII format, and they have hyper terminal setup for ANSI and i'm inclined to think that this underlining issue is ASCII versus ANSI input, for lack of a better word, configuration. So now my next question is two fold, should i try to email o support people as well and do you or anyone know of any other app that we could possible use to achieve said connection? (yes i am using baud 9600, data: 8 bit, Parity: none, and Stop: 1 bit before anyone asks).
Thanks
**I went ahead and sent a message to the guy anyways to see if i could get a response**
hatefuel19 said:
I had the same issue and no nothing from them yet........have you tried it with a usb keyboard?
Sent from my A500 using Tapatalk
Click to expand...
Click to collapse

superdave14 said:
No i have not, however i just talked to the people who work at Network Operations regarding Cisco input format. Slick USB is sending the data in ASCII format, and they have hyper terminal setup for ANSI and i'm inclined to think that this underlining issue is ASCII versus ANSI input, for lack of a better word, configuration. So now my next question is two fold, should i try to email o support people as well and do you or anyone know of any other app that we could possible use to achieve said connection? (yes i am using baud 9600, data: 8 bit, Parity: none, and Stop: 1 bit before anyone asks).
Thanks
**I went ahead and sent a message to the guy anyways to see if i could get a response**
Click to expand...
Click to collapse
Have you tried if the sending works at all with a null-modem cable to a laptop running hyperterminal or just shortening the TX and RX pins on the RS232 to get an echo response?
Sent from my A500 using XDA Premium App

tkolev said:
Have you tried if the sending works at all with a null-modem cable to a laptop running hyperterminal or just shortening the TX and RX pins on the RS232 to get an echo response?
Sent from my A500 using XDA Premium App
Click to expand...
Click to collapse
I have not done any other troubleshooting at this point, thats not a bad idea. I am not sure i have the correct cables to do this tho, i'll have to look in the old cables section of the office. I'll let you know what i find out.

superdave14 said:
No i have not, however i just talked to the people who work at Network Operations regarding Cisco input format. Slick USB is sending the data in ASCII format, and they have hyper terminal setup for ANSI and i'm inclined to think that this underlining issue is ASCII versus ANSI input, for lack of a better word, configuration. So now my next question is two fold, should i try to email o support people as well and do you or anyone know of any other app that we could possible use to achieve said connection? (yes i am using baud 9600, data: 8 bit, Parity: none, and Stop: 1 bit before anyone asks).
Thanks
**I went ahead and sent a message to the guy anyways to see if i could get a response**
Click to expand...
Click to collapse
That makes sense.....let me know.....I told a friend of mine who was about to get aj I pad about this and he walked out of best buy with the a500 instead (also works with Cisco routers on a daily basis
Sent from my A500 using Tapatalk

I just got a response from the Slick 2 USB team.
"Hi David,
Sorry for the late reply. I have had many requests for your exact same situation. The general consensus is that the blocking point is that you're unable to send a carriage return currently through the app. I'm in the process of rolling a separate app with more functionality that should address this. I'll send you a copy to test when its ready.
Thanks,
SlickDev Labs"
So as soon as i find something out i will let you guys know.

Good news everyone. I have been working with the developer and we have a working product that connects, logs in, reads and configures switches. I think there are a few more tweaks that need to be done but for the most part it is working. I am not sure when it will be released but i will post info when it is. I'm very excited about this

Good news everyone.
Were you able to get something that works? I have an Asus I would like to use in similar fashion.
Thanks!

can't hear songs just with headsets

hello
i have some mp3 files, which i can't hear correctly just with headsets, when i don't plug them i just head noise ?!
that's one of them:
http://server13.mp3quran.net/jhn/114.mp3
all the list:
http://server13.mp3quran.net/jhn/
but some of them works correctelly, like: 001.mp3
and others just work in few seconds, like 005.mp3 , it's good for the first 7 seconds, and then enter in noise, but when using headsets all goes ok.

Try to plat some video in YouTube or another app, what you hear?
You flash custom ROM ? Kernel?

Do a backup of your data and reflash your rom. If this doesn't help, we take it from there.

i just tested the files in another phone, and it's the same problem!
noise when hearing without headsets, and normal when plugging the headsets.
so, what to do?

If you say that you know the error came from the songs not from the device

On my Nexus 4 there arent any noises. I can hear this mp3 clearly - with headphone and over loudspeaker.
Mabe you just dont understand the language. :'D

CCody said:
On my Nexus 4 there arent any noises. I can hear this mp3 clearly - with headphone and over loudspeaker.
Mabe you just dont understand the language. :'D
Click to expand...
Click to collapse
so the problem is with my nexus !
the 2nd phone i tried in was also a nexus, but with a different rom.
i'm using now: miui 4.6.20 (from en.miui)
my kernel is: franco kernel 3.4.0 milestone 3
so, where can the problem be? in the kernel may be?

Miui isnt a official release. Based on my knockledge it is a ported rom by some xda members. There could be a issue with such roms, since they are ported. Did you already try another mp3 out? What about watching videos on youtube with loudspeaker? If this problem still occurs than you should consider flashing another rom.
May I ask if you also can revert your kernel to stock?

CCody said:
Miui isnt a official release. Based on my knockledge it is a ported rom by some xda members. There could be a issue with such roms, since they are ported. Did you already try another mp3 out? What about watching videos on youtube with loudspeaker? If this problem still occurs than you should consider flashing another rom.
May I ask if you also can revert your kernel to stock?
Click to expand...
Click to collapse
yes, other mp3 play normally, but some mp3 which i downloaded from 1 website all have the same problem.
watching videos on youtube has no problem also.
miui can't boot with stock kernel, so i'll try to flash another compatible kernel and try again.

ARDV said:
yes, other mp3 play normally, but some mp3 which i downloaded from 1 website all have the same problem.
watching videos on youtube has no problem also.
miui can't boot with stock kernel, so i'll try to flash another compatible kernel and try again.
Click to expand...
Click to collapse
Would you be so kindly giving me the mp3 files? Please some that are working and some that dont. I want to figure out something

CCody said:
Would you be so kindly giving me the mp3 files? Please some that are working and some that dont. I want to figure out something
Click to expand...
Click to collapse
yes, these are:
http://server13.mp3quran.net/jhn/001.mp3 (from 001.mp3 to 114.mp3) (or, that's the website:http://www.mp3quran.net/jhn.html)
edit:
i've tried changing the encoding of the files with: Switch Sound File Converter, but the same problem.

ARDV said:
yes, these are:
http://server13.mp3quran.net/jhn/001.mp3 (from 001.mp3 to 114.mp3) (or, that's the website:http://www.mp3quran.net/jhn.html)
edit:
i've tried changing the encoding of the files with: Switch Sound File Converter, but the same problem.
Click to expand...
Click to collapse
Those are all mp3s that cant be played properly? I will give a look at them and let you know by this evening.

CCody said:
Those are all mp3s that cant be played properly? I will give a look at them and let you know by this evening.
Click to expand...
Click to collapse
i hope you've found something.

Could you please check this mp3-file out? I've downloaded it from your website and converted it. Please give me feedback afterwards.
https://drive.google.com/file/d/0B0l28jocn7zxSTlxSmpwT3ZmaGc/edit?usp=sharing

CCody said:
Could you please check this mp3-file out? I've downloaded it from your website and converted it. Please give me feedback afterwards.
https://drive.google.com/file/d/0B0l28jocn7zxSTlxSmpwT3ZmaGc/edit?usp=sharing
Click to expand...
Click to collapse
It is working well
so, how to fix that files

Nice to hear!
The sample rate of the original mp3 files are 48000 Hz. I've downsampled it to 44000. It seems your device struggles to play such high sample rate...

CCody said:
Nice to hear!
The sample rate of the original mp3 files are 48000 Hz. I've downsampled it to 44000. It seems your device struggles to play such high sample rate...
Click to expand...
Click to collapse
what program is the best for making such conversations?

Any simple converter can do this job. I use format factory: http://www.pcfreetime.com/

CCody said:
Any simple converter can do this job. I use format factory: http://www.pcfreetime.com/
Click to expand...
Click to collapse
well , i've tried with both: Freemake Video Converter and ffactory, but the same problem?
you just changed that settings? may something else?
i hope that you make that change to a small file, like: 114.mp3 and upload it to test again.

This is what I did:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And if nothing works, than must tell me the files you need and I will convert it for you.