Hi!
Is the Libra same as Blade or not?
and does Libra ROMs work in Blade?
Libra ROMs works so is libra ZTE BLADE with other cases..?
EDIT:can anyone edit TouchWiz Android for zte blade?
Yep it is mostly the same.
The same ROM's should work on either.
OK thanks for answering!
k0zmic said:
Yep it is mostly the same.
The same ROM's should work on either.
Click to expand...
Click to collapse
IMHO only when Blade is gen2.
digital0 said:
IMHO only when Blade is gen2.
Click to expand...
Click to collapse
Yeah, good point. I forgot to mention that important bit.
Libra is almost same phone as newest Blades. All Gingerbread ROM´s works, BUT on Libra doesn´t work camera with latest CM7 builds. Propably different camera hardware.
HUdasp said:
Libra is almost same phone as newest Blades. All Gingerbread ROM´s works, BUT on Libra doesn´t work camera with latest CM7 builds. Propably different camera hardware.
Click to expand...
Click to collapse
yes I found information about that...
too bad can't download official libra's GingerBread ROM.. :/
manumanfred said:
yes I found information about that...
too bad can't download official libra's GingerBread ROM.. :/
Click to expand...
Click to collapse
But wouldn't the Gingerbread leak that Ginger Stir Fry is based upon be basically the same as a Libra ROM i.e. Gingerbread on a .35 Kernel?
I guess you can have a look through this thread for what is closest to an official Libra ROM
k0zmic said:
But wouldn't the Gingerbread leak that Ginger Stir Fry is based upon be basically the same as a Libra ROM i.e. Gingerbread on a .35 Kernel?
I guess you can have a look through this thread for what is closest to an official Libra ROM
Click to expand...
Click to collapse
OK!
I using the Ginger Stir Fry and all not work so I need to test the CM7 newest nighty ROM and then I need to find 100% stable working fast ROM to zte!
All ROMs are wrong or not work all features...
and I want official not leak ROM!
because I don't want cra##y ROM to my ZTE Blade II
has any1 of you got a dump of the stock 2.2 libra rom? if yes... could you upload it somewhere? i installed 2.3 on my libra... everything is working EXCEPT the camera so either i need to head back to 2.2 or someone of you has already solved that issue :/ perhaps the cm7 cracks could find a solution...?!
fattymcdirty said:
has any1 of you got a dump of the stock 2.2 libra rom? if yes... could you upload it somewhere? i installed 2.3 on my libra... everything is working EXCEPT the camera so either i need to head back to 2.2 or someone of you has already solved that issue :/ perhaps the cm7 cracks could find a solution...?!
Click to expand...
Click to collapse
maybe in android.modaco you can find stock libra 2.2 ROM
nope... nothin' found, which is REALLY a stock rom of the libra.. :/
these is the libra camera...
would some1 be able to implement those drivers into cm7 to make the cm7 blade rom compatible to the libra?
that's the only hardware difference between the libra and the blade:
msm_camera_mt9p111.0
msm_camera_s5k5cagx.0
msm_camera_s5k5cagx_mcnex_qtech.0
Hi, I have ZTE Libra 2.2 out of the box.
Is there any easy way to backup the ROM ?
THx
m0hamed said:
Hi, I have ZTE Libra 2.2 out of the box.
Is there any easy way to backup the ROM ?
THx
Click to expand...
Click to collapse
use the romdump method
saaransh9 said:
use the romdump method
Click to expand...
Click to collapse
Hi saaransh9, thanks I never tried but I had already clockWokMod installed and launch a backup on my sd card.
Now I have all these files, which one can be shared and used as an original ROM ?
boot.img 5.1MB
recovery.img 5.1MB
system.yaffs2.img 165MB
data.yaffs2.img 136MB
.android_secure.vfat.tar 2k
cache.yaffs2.img 25k
nandroid.md5 1k
Or maybe I should better use romdump ?
Thx
m0hamed said:
Hi saaransh9, thanks I never tried but I had already clockWokMod installed and launch a backup on my sd card.
Now I have all these files, which one can be shared and used as an original ROM ?
boot.img 5.1MB
recovery.img 5.1MB
system.yaffs2.img 165MB
data.yaffs2.img 136MB
.android_secure.vfat.tar 2k
cache.yaffs2.img 25k
nandroid.md5 1k
Or maybe I should better use romdump ?
Thx
Click to expand...
Click to collapse
nandroid backups always work whenever u mess up with your phone just u need to have cwm recovery and nandroid backup on ur sd card and then go to recovery and just restore.
i hope it works
Related
Hello!
I have enough, and I want to try something new. I would like to test some of the tattoo roms, so i will root the phone.
Now i need your opinion which rom to choose?
In which rom all the stuff (app and camera and other works fine)? Is here on the forum that kind of rom?
THanks!
Greetings from Slovenia!
Well, there are quite some good ones out there...Azusa, 5faif, fyodor and Cthulhu ROMs are the ones currently being developed and updated...but now I'll put my effort entirely to get FroYo to work...
TheSSJ said:
Well, there are quite some good ones out there...Azusa, 5faif, fyodor and Cthulhu ROMs are the ones currently being developed and updated...but now I'll put my effort entirely to get FroYo to work...
Click to expand...
Click to collapse
So we have to wait for your rom
Well, not only mine since I'm not skilled enough (yet)...but this has to be a teamwork ROM!
I am eagerly waiting for Froyo.
When I install the new rom, and recovery and other stuff, can i install then back the original room, when the phone in once rooted ? Or not ?
Yes, you can - you can download the original HTC ROM which is located somewhere in the net...sry, have no DL link...^^
Where to download chtlhu's ROM for htc tattoo?
MrSerbia1 said:
Where to download chtlhu's ROM for htc tattoo?
Click to expand...
Click to collapse
Find all the custom ROM's for tattoo here. According to me the Puzzle ROM is the best! http://forum.xda-developers.com/showthread.php?t=698576
TheSSJ said:
Yes, you can - you can download the original HTC ROM which is located somewhere in the net...sry, have no DL link...^^
Click to expand...
Click to collapse
link for all the shipped ROM http://shipped-roms.com/shipped/Click/
base on huawei Honor android 4.0 ROM，use .35 kernel , default 1Ghz cpu freq
Working:
3G
Calling
MMS
Signal Strength
All sensors
Headphones
Virtual keys
LED
Screenshots
Sound/Sound Record
Video
TouchScreen
Multitouch
Hardware Accelaration
SDcard/USB
Not Working:
ROOT
Camera
Gapps
WIFI
USB Tethering
Bluetooth
Camera
FM
TV-out
support u8800pro and u8800，you should upgrade to offical android 2.3，if not the usb、RIL will not work.
if you upgrade to offical android 2.3 ，recovery you could use this one（u8800 & u8800pro）：
http://forum.xda-developers.com/showthread.php?t=1343276
Download：http://sourceforge.net/projects/genoandroid/files/u8800pro_u8800_ICS_demo.zip/download
Geno, is not possibke to do something more with our normal u8800.
Sent from my u8800 using XDA App
Nice! Looking forward for more!
nice work.
Which kernel did you use?
Nice Effort Thanks
awesomee great work. now just fix camera& wifi and i will be using it for everyday use
You shouldn't have bricked your Ideos x5 u8800...
So... This works with u8800 AND pro?
support u8800pro and u8800，you should upgrade offical to android 2.3，if not the usb、RIL will not work.
Click to expand...
Click to collapse
And to run this i have to upgrade to 2.3 to get usb and rils working?
I have u8800.
genokolar said:
base on huawei Honor android 4.0 ROM
Worked： RIL、audio、video、USB、3D、sensors
not work：WIFI、Bluetooth、Camera、FM、TV-out
support u8800pro and u8800，you should upgrade offical to android 2.3，if not the usb、RIL will not work.
Download：http://sourceforge.net/projects/genoandroid/files/u8800pro_u8800_ICS_demo.zip/download
Click to expand...
Click to collapse
Wonderful work i will start query saying thank you 1st.
1.Normal U8800 owners should upgrade to 2.2 GB to get the RIL and USB working right??
2.Which CWM we should use to flash this ROM??
3.Same zip file for both phones??
brdnacer said:
what about u8800? when is ics for u8800 coming? any work already?
Click to expand...
Click to collapse
u8800 can use this one too
genokolar said:
u8800 can use this one too
Click to expand...
Click to collapse
Sir what CWM we should use for U8800 with upgraded to GB???
krish_nank said:
Wonderful work i will start query saying thank you 1st.
1.Normal U8800 owners should upgrade to 2.2 GB to get the RIL and USB working right??
2.Which CWM we should use to flash this ROM??
3.Same zip file for both phones??
Click to expand...
Click to collapse
u8800 should upgrade to 2.3
i writed
yes, both
krish_nank said:
Wonderful work i will start query saying thank you 1st.
1.Normal U8800 owners should upgrade to 2.2 GB to get the RIL and USB working right??
2.Which CWM we should use to flash this ROM??
3.Same zip file for both phones??
Click to expand...
Click to collapse
1. RILs didnt work for me. Havent use official GB demo.
2. Normal
3. Yes
u8800 can use this one too
Click to expand...
Click to collapse
K. ty.
Geno was faster
julle131 said:
1. RILs didnt work for me. Havent use official GB demo.
2. Normal
3. Yes
K. ty.
Geno was faster
Click to expand...
Click to collapse
Did you flash GB before you flash this ROM
krish_nank said:
Did you flash GB before you flash this ROM
Click to expand...
Click to collapse
As i wrote, no i didn't.
So this is going to have what kernel
Sent from my u8800 using XDA App
Geno, How is your u8800 doing?Have you taken it to warranty yet? I hope you can get camera and wifi working. Then I consider the rom ready for everyday use.
my opinion
Tested it and i must say i was not impressed at all.If this is what ICS has to offer i must say i am disappointed.So i cant understand why all the fuss about it.i guess the final version will impress me.
sweet. It's working here on U8800. it's smooth enough for first release great work. thanks
Just so you know, Camera is listed twice in the Not Working section in the forst post
Hi There,
I have a Gen1 OLED UK Orange San Francisco that has been upgraded to Gen2 via TPT method. I am running a Ginger Stirfry variant
I am rooted and running clockwork mod.
I would like a super clean as close to stock as possible Gingerbread rom. An official ZTE blade 2.3.5 build would even do.
Just something super clean and super stable, with decent battery that I can flash with minimum hassle.
Any help appreciated.
Cheers
sere83 said:
Hi There,
I have a Gen1 OLED UK Orange San Francisco that has been upgraded to Gen2 via TPT method. I am running a Ginger Stirfry variant
I am rooted and running clockwork mod.
I would like a super clean as close to stock as possible Gingerbread rom. An official ZTE blade 2.3.5 build would even do.
Just something super clean and super stable, with decent battery that I can flash with minimum hassle.
Any help appreciated.
Cheers
Click to expand...
Click to collapse
swedish snow is best for you.
anyway if u want battery try joyos rom and the one by squazone both are based on cm7 and give good performance and battery
try the nightly builds for your phone, its the best for mine.
poqi_ako said:
try the nightly builds for your phone, its the best for mine.
Click to expand...
Click to collapse
i think he is asking for stock
Thanks for your help. I tried swedish snow I think but didn't lie it hat much. Do you have a link to the other 2? I ran a search but could not find them.
Will none of the stock 2.3 zte roms work?
Both the roms have threads in the Blade Android Development sub-forum
If people could just search......
Try this, which says broken but it's stable ya....
Right now i am using this NIGHtly latest(see link), which will never hurt you at any instance.... very smooth and also u can play games without lag.....
download.cyanogenmod.com/?type=nightly&device=blade
My little bro is gonna get a zte blade for His birthday and he don't want 2.1 on it so i wonder if there is an official 2.3 update or i need to root it? And if i need to the how?
Some help would be nice
Try caynogenmod 7,if ur bro want much better performance than use brustlam's ics AOKP MIX CM9 it awesome, better batery life.....
blader95 said:
Try caynogenmod 7,if ur bro want much better performance than use brustlam's ics AOKP MIX CM9 it awesome, better batery life.....
Click to expand...
Click to collapse
Well it will be some months warranty and after that he will update to cm7 or cm9. So is there any official update? And will z4root work?
Sent from a X8 using my thumbs
RomWiz said:
My little bro is gonna get a zte blade for His birthday and he don't want 2.1 on it so i wonder if there is an official 2.3 update or i need to root it? And if i need to the how?
Some help would be nice
Click to expand...
Click to collapse
U need to root it. Use z4root mod (a software widely available) and select permanent root and reboot ur phone. Next flash cyanogenmod. U could go for cm9 but for a new user, a fully stable cm7 is better. Try burgerZ kang found in cm7 kang thread in the blade android development section. Download the rom and the Gapps
Download rom manager and flash clockworkmod recovery. Backup data
Put the rom and gapps in ur sdcard. Reboot into recovery by pressing volume down and power. Wipe data and cache. Select install zip from sdcard and flash both the rom and gapps
Reboot.
See the link in my "cm7 ics" thread in the Blade general for an ics look
QuantumFoam said:
U need to root it. Use z4root mod (a software widely available) and select permanent root and reboot ur phone. Next flash cyanogenmod. U could go for cm9 but for a new user, a fully stable cm7 is better.
Click to expand...
Click to collapse
I'll Try this when he gets it in about 2 weeks :thumbup:
Thanks
I have read that some roms gives you access to all the 512 mb of RAM instead of 256 mb is that possible?
Sent from a X8 using my thumbs
Don't wait for the official updates. You're loosing a lot
Root and custom rom it's a must!!
QuantumFoam said:
U need to root it. Use z4root mod (a software widely available) and select permanent root and reboot ur phone. Next flash cyanogenmod. U could go for cm9 but for a new user, a fully stable cm7 is better. Try burgerZ kang found in cm7 kang thread in the blade android development section. Download the rom and the Gapps
Download rom manager and flash clockworkmod recovery. Backup data
Put the rom and gapps in ur sdcard. Reboot into recovery by pressing volume down and power. Wipe data and cache. Select install zip from sdcard and flash both the rom and gapps
Reboot.
See the link in my "cm7 ics" thread in the Blade general for an ics look
Click to expand...
Click to collapse
A normal z4 root doesn't work google z4root modaco and then first result.
saaransh9 said:
A normal z4 root doesn't work google z4root modaco and then first result.
Click to expand...
Click to collapse
Is it true that cm7 gives you access to all 512 mb Ram?
Sent from a X8 using my thumbs
RomWiz said:
Is it true that cm7 gives you access to all 512 mb Ram?
Sent from a X8 using my thumbs
Click to expand...
Click to collapse
it depends on your phone if u got gen2 and have a european blade then yes else no.
u can convert gen1 to gen2 using a tpt if u have a european blade
saaransh9 said:
it depends on your phone if u got gen2 and have a european blade then yes else no.
u can convert gen1 to gen2 using a tpt if u have a european blade
Click to expand...
Click to collapse
I live in sweden
How Do i se if it is gen1 or gen2?
Sent from a X8 using my thumbs
RomWiz said:
I live in sweden
How Do i se if it is gen1 or gen2?
Sent from a X8 using my thumbs
Click to expand...
Click to collapse
Ask Mr pigfish from play store
saaransh9 said:
Ask Mr pigfish from play store
Click to expand...
Click to collapse
Okey
Thanks
Sent from a X8 using my thumbs
saaransh9 said:
Ask Mr pigfish from play store
Click to expand...
Click to collapse
While Mr. Pigfish is widely preferred, Blade Buddy also tells u the Blade version
QuantumFoam said:
While Mr. Pigfish is widely preferred, Blade Buddy also tells u the Blade version
Click to expand...
Click to collapse
Okey
One last question can z4root make a bootloop or brick?
Sent from a X8 using my thumbs
Everything can happens but with low possibility...
RomWiz said:
Okey
One last question can z4root make a bootloop or brick?
Sent from a X8 using my thumbs
Click to expand...
Click to collapse
no
Gnaver said:
Everything can happens but with low possibility...
Click to expand...
Click to collapse
saaransh9 said:
no
Click to expand...
Click to collapse
Good to know
Sent from a X8 using my thumbs
Hi all
I have no many experience with this phone. Mine is Gen2, rooted stock GingerBread. I am seeking for an overclockable kernel working with this rom and circle battery mod. I tried some mods, but they stucks this phone
So please post the wanted files or link. Many thanks
Sent from my U8800pro using xda premium
Install CyanogenMod 7 or 9. They are overclockable
QuantumFoam said:
Install CyanogenMod 7 or 9. They are overclockable
Click to expand...
Click to collapse
Sorry, i dont like CM. I prefer stock with basic tweaks.
Sent from my U8800pro using xda premium
U tried wbaws kernel?
QuantumFoam said:
U tried wbaws kernel?
Click to expand...
Click to collapse
No, i dont know which kernels are available for this phone and how to flash them. This zte is phone of my wife. On my personal huawei i only replace the boot.img in root explorer and it is all. In the zte is no such file. So please post the link or file and how to flash. Many thanks.
Sent from my U8800pro using xda premium
On the first page of this thread there are links to two kernels. Just flash from recovery
forum.xda-developers.com/showthread.php?t=1485445
thanks for your help. kernels are not working, but new adreno drivers yes.
linomaniac said:
thanks for your help. kernels are not working, but new adreno drivers yes.
Click to expand...
Click to collapse
because they are meant for cm try ones from swedish snow or the rom itself it is based on stock 2.3.5
Moved to General. Please post in the correct forum.
Cheers.
i installed SwedishSnow RLS7, but there is no sim working. No signal, not connected radio. When i switch to airplane mode ON, it becomes inactive and i cannot swich it off. When i recovered via cwm back to official 2.3.5 and tried to recover the boot from SS (because of unlocked kernel), it freezes at ZTE logo. So the official does not work with SS kernel. I am so unhappy
linomaniac said:
i installed SwedishSnow RLS7, but there is no sim working. No signal, not connected radio. When i switch to airplane mode ON, it becomes inactive and i cannot swich it off. When i recovered via cwm back to official 2.3.5 and tried to recover the boot from SS (because of unlocked kernel), it freezes at ZTE logo. So the official does not work with SS kernel. I am so unhappy
Click to expand...
Click to collapse
u got your blade with gingerbread???
what your gen is it gen??
saaransh9 said:
u got your blade with gingerbread???
what your gen is it gen??
Click to expand...
Click to collapse
Its gen3 Blade
Have you TPTed your phone to gen2? Have you an IMEI? (Look in settings). I have read something on modaco where if a gen3 phone is tpt to other gen, it will loose her network (basebande probleme?) But im not very certain...
Send from my Blade!
Gokh said:
Its gen3 Blade
Have you TPTed your phone to gen2? Have you an IMEI? (Look in settings). I have read something on modaco where if a gen3 phone is tpt to other gen, it will loose her network (basebande probleme?) But im not very certain...
Send from my Blade!
Click to expand...
Click to collapse
Currently in the GB stock rom the IMEI is present. Pigfish says Gen2 - sold with Froyo, thats true. I only want to use an oc kernel, not whole custom rom, because they are not fully localized. This phone uses my wife and she likes our native language. I use a huawei u8800pro and the speed difference is huge. I hope that 100 mhz up helps her a little bit.
Sent from my U8800pro using xda premium
del...