Database Users

Imei-Check with Windows Vista

Hi,
i just paid for imei-check and im not running xp any more im running vista, hence no active sync i use mobile device center (part of vista)
as a result C3v1Unlock.exe cant see my connected XDA orbit device.
any ideas of a workaround for this ? other than going to an xp machine to do it?
Thank You

Update :
I go ttit to work by disabling windows firewall, it connects to my device now and reboots it, but then it says
"this unlocker works for Artemis devices only. Aborting"
any ideas ?
Thanks

inertiauk said:
Hi,
i just paid for imei-check and im not running xp any more im running vista, hence no active sync i use mobile device center (part of vista)
as a result C3v1Unlock.exe cant see my connected XDA orbit device.
any ideas of a workaround for this ? other than going to an xp machine to do it?
Thank You
Click to expand...
Click to collapse
the 4.2 version is incompatible with windows Vista, try the new 4.5 beta.
For your information Windiows Vista have built in the active sync module (look the mobile connection probram in side bar).

no, not found in Vista, I'll try the V2 probram of imei.check. This program ask me to attend if I'm Vista user (attend for 2 minutes for Vista install program), but I've attend for 5 minutes and my P3300 screen still blank!

I used imei check with vista and it worked perfectly first time - did you set a connection and sync the orbit with windows before you tried?

Big problema, cannot update...help

hi to everyone,
about a year ago, i patched thr spl...now is 2.13.0000. Yesterday i tried to install to my imate jamin (s200) the new qtek s200 italian rom. The process start successfully and cheked the version. When the phone reboot itself and shows the bootscreen, he program said that there was error 260 and cannot continue; on the phone screen reamin the boot section. When i try to rebbot, it works, but in this way i cannot update my phone. How i can solve this??
i use windows vista and windows mobile device center 1.0 version; also, i used on innotek virtual machine, windows xp with activesync 4.5I would like to inform you, if you can help, theat about a month ago i sent my phone to the assistence because the audio didn't work (is it possible that the assistence did something that block the update??
thanks and please help!!
on the bootscreen, compares RUU on the right-up side,ipl 2.13,spl 2.13 and (all writes are in the red section) and usb on the left-bottom side (on white background)! that's all, i think i've said everything...please HELP!!!

THE PROBLEM IS THAT PROPHET CANNOT CONNECT AT USB IN BOOTLOADER
i've tried, also, to use camera + softreset and when reboot the writes RUU disappear, but still not recognize on usb when in bootloader.
Someone can solve this problem? please....

your problem is vista!
use native windows xp and not VMWare or some Virtual Computer!
have the same strange errors if i flash with vista.
how you have flash your ipl to 2.13??

i used the pdamobiz...i think my ipl was 2.15.0000, and after downgrade, it becomes 2.13.0000. Sound strange? So, do you think the problem is vista and the VM? but i read in this forum that lots of people flash hos phone using xp on virtual machine....but you mean that in vista if you plug the phone (botloader) in to computer, windows doesn't recognize it?

i havent test "win xp vm" on a "vista host". my work laptop has vista and i cant update any rom/firmware. vmware use the host system and his driver to route the usb device. possible the usb-subsystem in vista is changed to much ;-)
test it ... if work ... ok ... we can debug it!

SOLVED
SOLVED! I flashed the prophet on "real" xp. Now my spl changed to 2.20.000 and ipl remain at 2.13.0000. I have another question: if i flashthe phone with one rom of wm6 (which is better?or which is the rom with less bugs?), can i reflash with a wm5 rom without problem?
thanks in advance and thanks for your advice!!

USPL - 100% Working in vista

I have a long fight with USPL and vista, but finally yesterday I won.
All you need to do is:
1. Remove your SD card
2. Do a hard reset or clean storage (some programs like battery status block full access to your device)
3. Connect your mobile to PC and make sure that activsync connection is established
4. Start to flash your device with USPL, when DOS part end and your mobile switch to bootloader mode vista will find new device and start instaling new drivers.
5. Wait till vista finish installing new drivers and unplug your device, do a soft reset
6. Next step is to change vista drivers to xp, to do this you need to fallow this instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
8. When USPL instalation will finish you can flash any rom you want to your arte
Succesfully tested on my T-Mobile MDA UK now I've got WM6 WWE.
Thanks pof for your great release

grabson79 said:
I have a long fight with USPL and vista, but finally yesterday I won.
All you need to do is:
1. Remove your SD card
2. Do a hard reset or clean storage (some programs like battery status block full access to your device)
3. Connect your mobile to PC and make sure that activsync connection is established
4. Start to flash your device with USPL, when DOS part end and your mobile switch to bootloader mode vista will find new device and start instaling new drivers.
5. Wait till vista finish installing new drivers and unplug your device, do a soft reset
6. Next step is to change vista drivers to xp, to do this you need to fallow this instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
8. When USPL instalation will finish you can flash any rom you want to your arte
Succesfully tested on my T-Mobile MDA UK now I've got WM6 WWE.
Thanks pof for your great release
Click to expand...
Click to collapse
Thanks for news about it..!
Worked for me.

Works Great !

One more notch on WM6 belt!!
Working great!!!
Used it to upgrade to WM6 (bepe's) and later, GSM (2.93.90)!!
Big

Thank you, this helped me USPL my orbit on vista.

Oh...My...God! That is so cool of you! Many thanks!!!

at step 4: do i stop after the DOS part? Or do i continue with the screen with the big picture of a mobile?
Because after the DOS part vista installs the drivers but i'm not yet in the bootloader screen on my mobile (but i've got a white screen).
at step 6: When i untick "allow USB connections" in the WMDC, my mobile is no longer in the Device Manager list so how can i then change te drivers to the XP drivers?

Sharkey1802 said:
at step 4: do i stop after the DOS part? Or do i continue with the screen with the big picture of a mobile?
Because after the DOS part vista installs the drivers but i'm not yet in the bootloader screen on my mobile (but i've got a white screen).
at step 6: When i untick "allow USB connections" in the WMDC, my mobile is no longer in the Device Manager list so how can i then change te drivers to the XP drivers?
Click to expand...
Click to collapse
First put your Artemis into bootloader then connect to your PC. Vista will install a driver for a PDA but this driver is not correct. You can find the correct drivers in the posts above this. After installing the NEW drivers you can reset your artemis and disconnect it from your pc. Restart it and just run USPL again. Has to work now.
Good luck!

ok what am i doing wrong...?
have followed all the steps above... but still get a 270?
am on official O2 uk WM6 rom but want to upgrade radio as performance / batt life have become dire since moving from the HTC WM6 rom to the offical O2 one....
device now syncs without drop out having changed driver to the old 2004 one... but still cant upgrade radio or USPL or anything ......
HELP!

the odd thing is the O2 wm6 rom updates fine within vista. but nothing will go over the top of it?

o21 exchanged my orbit... new one updates fine.. woohooo

first thanks for the news now we know the uspl works on vista
second 2. Do a hard reset or clean storage (some programs like battery status block full access to your device) is interesting to know this
grabson79 said:
I have a long fight with USPL and vista, but finally yesterday I won.
All you need to do is:
1. Remove your SD card
2. Do a hard reset or clean storage (some programs like battery status block full access to your device)
3. Connect your mobile to PC and make sure that activsync connection is established
4. Start to flash your device with USPL, when DOS part end and your mobile switch to bootloader mode vista will find new device and start instaling new drivers.
5. Wait till vista finish installing new drivers and unplug your device, do a soft reset
6. Next step is to change vista drivers to xp, to do this you need to fallow this instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemid=27
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
8. When USPL instalation will finish you can flash any rom you want to your arte
Succesfully tested on my T-Mobile MDA UK now I've got WM6 WWE.
Thanks pof for your great release
Click to expand...
Click to collapse

Second time flashing, help!
I succesfully flashed my Artemis (after using USPL)... At the moment, I'm tired of my cooked ROM and I would like to install a new ROM. Do I have to use USPL a second time?
Bootloader screen says: SPL 1.11.100 (or something like that...)
Many thanx...

Doesn't work, because Vista says that it is not a Vista driver. How did you all installed the drivers under vista???

cmon uspl gives error code 260
Though I am not new to these ROM upgrading things, I am always receiving error code 260 while trying to update the SPL by cmon uspl. I have already successfully updated by uspl, long ago. I have flashed several ROMs and tried most of them.
Why only cmon uspl is giving me such error?

HELP

Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael

miriedl said:
Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael
Click to expand...
Click to collapse
Update UPSL v0.1 by Pof
Link here :
http://forum.xda-developers.com/showthread.php?t=311403
And try again..!
Cheers...!

Hmmmm.
What do you mean with:
Update UPSL v0.1 by Pof
Michael

Pof is a user
UPSL is an unlocker utility so you can flash alternative ROM's
check the link - very informative.
reflashing your phone usually takes a weeks worth of reading if you care for your device.

And read it :
http://forum.xda-developers.com/showthread.php?t=312052
maybe it help you..!

Is there an easier way to explain this - Sorry i'm quite good working with my PC, but this was a bit greek:
All you need to do is:
1. Remove your SD card
2. Do a hard reset or clean storage (some programs like battery status block full access to your device)
3. Connect your mobile to PC and make sure that activsync connection is established
4. Start to flash your device with USPL, when DOS part end and your mobile switch to bootloader mode vista will find new device and start instaling new drivers.
5. Wait till vista finish installing new drivers and unplug your device, do a soft reset
6. Next step is to change vista drivers to xp, to do this you need to fallow this instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemi d=27
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
8. When USPL instalation will finish you can flash any rom you want to your arte
Succesfully tested on my T-Mobile MDA UK now I've got WM6 WWE.
Thanks pof for your great release

That explination is about as clear as it gets in 'phone talk'.
Perhaps elaborate a bit on what is exactly, or what step is, throwing you off.

Windows XP
Hi again.
Would i solve the problem if i just installed it from an Windows XP machine at work?
One final thing - Do you know if the GPS will still be working afterwards.
Have a good night from Oslo - Norway
Kind regards
Michael

help help help!!!!!!! MDA

ok my i have a mda vario and i have no clue how to connec it with my pc..i tried using window mobile center but it always said im not connected but when i go to the settings it says my phone is connected can anyone help me? cuz i really wana add stuff to my mda

Win Vista is still with problems,use WinXP and latest Activesync 4.5,there won't be any problems.

how do i change back to winxp

Simply,either make new partition of the Hard Disk and install winxp or altogether install a fresh installation of winxp on your pc.But if you have another pc or notebook with winXP running,use that one.