Database Users

WM2005 messed up my Audiovox SMT 5600. Help!

So i installed WM2005 on my phone and now i get
device authenification failure....
please contact the product manufacturer. For reference please provide your device ID.
3546110002736801
68000050bf3f5173 8un
(yeah i know it's all my fault)
now i don't know how to get back. the only thing i can get to is the bootloader screen and i have a couple of roms but the only one will work with the mtty program that communicates with the phone are .bin files which i ddon't have. Any ideas guys? I kinda just want my phone back.

i am really confused as to why it doesn't work. maybe it's because its for the c500 only. but looking at this link
http://msmobiles.com/news.php/3848.html
there is one for the audiovox.

did you try to run the normal upgrade when the phone is connected via usb in BL?

i've tried the uk update but it says i need to be connected to activesync. boing to go buy a card reader today to try backing up from the sd card.

Big problem

Hi
I am new here and i have problem
When i turn on my qtek9000, i recieve message Serial V.100.
If i connect USB cable it displays USB instead of Serial.
This happened when i tried to do radio upgrade (through usb hub, sim and sd were also in phone...).
I have 1gb SD card and also card reader mounted in laptop, so transfering files should not be problem.
Can someone help me with step-by-step procedure how to make my qtek work back. I used a lot of search but i am even more confused....
I just remember that when qtek worked Radio was something like 1.0.3.1 and also WWE was writen somewhere....
Probably i should put rom to sd with ntrw (which wersion of both),.......
please help....

might be a dumb question on my part - but have you tried a reset (initially a soft one but then a hard one of course, if nothing else works...) ???
I mean you will at least be able to revert back to the condition 'out of the package'...
Hope everything works out!

jup.both things NOT HELPED

looks like you're stuck in the bootloader mode....
try flashing the rom & the radio rom once again by connecting it to your laptop's usb...
i guess something screwed up while you were upgraging your radio rom...and you'd need to redo it!
Best,
San

can you please write me a procedure?

You might want to check the following thread. Everything is well described.
Cheers
hrb
http://forum.xda-developers.com/viewtopic.php?t=32725

i am trying to download files but i get permission denied all the time

You mean you get an error when clicking this link ?
ftp://xdaupload:[email protected]/Universal
I don't understand that, it works perfectly well for me
Cheers
hrb

I have solved problem with Radio upgrade. I am in much better mood now. 8)
Anyway i have 4 more questions.
1.) I am using bluetooth car-instalation Parrot CK3100. I am wondering if is possible to transfer any other sound except telephone conversations to that device. When i had Nokia 9500 i was able to hear every single click,tone,...i made on phone also on car-instalation. I also heard nokia ringtone in car instalation.With qtek i am getting generic car-instalation ringing tone instead of phone ringing. Otherwise primary intention (hands free talking) works fine. I would like to have that to be able to hear voices from various GPS software.
2.) Since QTEK9000 is PDA and phone in single unit I would like to have in car GPS application "always on top". Like previously mentioned i can easily manage my calls with car-instalation. Therefore i would like to run Phone section in background or GPS applications on top.I hope you will understand what i would like to say
3.) I also need in-car holder for qtek. Do you have any reccomendations?
4.)
My settings:
R: 1.04.02
G: 42.37.P8
D: 1.13.64.WWE
Is that ok or should i upgrade?

Stuck in bootloader mode
Hi guys,
Got stuck in bootloader mode following an upgrade attempt. Tried to reflash radio using the files from the pload folder only to get an error saying it's for the wrong device - tried this several times with the same result.
any ideas?
Is there a binary and a tool I can just do a straight upload?
thanks

Re: Stuck in bootloader mode
Bauser_uk said:
Hi guys,
Got stuck in bootloader mode following an upgrade attempt. Tried to reflash radio using the files from the pload folder only to get an error saying it's for the wrong device - tried this several times with the same result.
any ideas?
Is there a binary and a tool I can just do a straight upload?
thanks
Click to expand...
Click to collapse
try it with this file -
1. put radio.nbf and the file attached below in the same folder and run the exe with ur device connected to usb in bootloader mode...
2. hope it flashes it
S

Thanks DreamTheater
Thanks for your help - unfortunately I got the same message, ie this rom is not meant for this device etc...
Will see O2 can do anything (who's that laughing...???) - was going to buy a new xda mini anyway...!

1. REMOVE your SD/MMC card.
2. Soft/hard reset.
3. Run the upgarde again.
Step 1 above solved my problem.

problem magician

I am new of the forum, I have just purchased a nm8 used magiacian (t-mobile MDA) it is I bring a problem.
The preceding owner has begun an updating of the rom that has not gone to good end and the device doesn't now set out anymore and from the following error:
USB V1.00 (if connected USB).
Serial V1.00 (if disconnected).
Bootloader mode ?
What must I do for going on?
I hope in a help
Best regards Luca

help
I pray you helped me, the first post is from beginners, but believe I have followed the standard procedure.
unloaded the rom
unloaded no-id
always tried upgrade more times failure.
HELP !

for the beginning you should use a standard ROM to get familiar with the device.
just go to the t-mobile website, downloads, chose your device type and then look for files named softwareupdates or so.
they will be in zip-format.
there will be an application in there. just go into bootloadermode, connect your device and start the upgrade. it's completely guided and will last about 20min.
although most of the ppl that read/write in this forum didn't install the eROM, I think you can start with all the cusomization stuff. If you have become more familiar with your mdac, you can try other modified ROM's.
just ask if you have more questions
greetz Stefan

i have to say that using standard rom (jam rom downloaded from club imate)
the upgrading applications hangs.....
and leave magician in booting mode, ready to be erased....
i was desperaded, but last experiences with motorola phones and its firmwares advice me to try again
so i had to launch againg that apps and it starts erasing actual rom....
i think there is a bug in few roms.... may be only in its installer

Have tried with the T-mobile rom but doesn't even go with that!

Caslu,
Have you tried a hard-reset?
If so: I guess you've got a decent TMO magician rom downloaded. So get maupgradeut_noid.exe from the ftp. Extract all the files from your TMO shipped-rom & put them in a directory, so you get some .nbf files, enterbl.exe & maupgradeut.exe. Now put the maupgradeut_noid.exe in the same directory. Connect your magician to the usb. It should read usb v1.00, if your magician isn't in bootloader press camera&power&soft-reset at the same time for a few secs. till you get the usb or serial reading.
After connecting it to the usb execute the maupgradeut_noid.exe twice, first execute might give an error 120 second should finish.
If this fails make sure you got a magician & not a charmer.
If it's a magician return it, cause I think it's broken. Hey why buy a device that's in an inconclusive state??
Regards, M

I think really that It broken.
Have picked it because little cost!
non one reply .......

caslu said:
I think really that It broken.
Have picked it because little cost!
non one reply .......
Click to expand...
Click to collapse
Download the latest shipped ROM for the country your magician was first sold in.
Ensure Activesync is in the normal mode (USB check is ON).
Run the executable ROM update program.

[Q] HD2 LEO T8585 Clone - bootloader corrupted

I flash this phone with a wrong image, and now only a black screen appear.
Is impossible to make any key combination to get to the "download screen" ?
If I try to connect it via ActiveSync, fail, nor with K3firstAid. The only thing I recognize is the Huawei PC COM port. Appears only slightly illuminating the display, and nothing more.
I pray all the masters of this kind of cell phone to tell me that there is salvation, and if so, let me explain the process the "resurrection". (excuse the Google translation)
Thanks in advance

If it's not a true HTC phone then there is nothing that can be done for it here.

No, not a real HTC, a Chinese copy of it. I've seen on this forum that many people have problems with these phones, so I thought that there is someone who will help me.

nboskic said:
No, not a real HTC, a Chinese copy of it. I've seen on this forum that many people have problems with these phones, so I thought that there is someone who will help me.
Click to expand...
Click to collapse
My guess is that your fake HD2 uses a different bootloader than the real one. Most issues with the HD2 can be undone, so long as the bootloader is intact. Screw up the bootloader and your phone is done for. Also these ROMS are built for the HD2's hardware and drivers. Your phone may look like somewhat like an HD2, but the similarities stop there. Should have bought a real HD2.

Why you want to flash a fake HD2 with a genuine HD2 ROM in the first place is beyond me.......

nboskic said:
I flash this phone with a wrong image, and now only a black screen appear.
Is impossible to make any key combination to get to the "download screen" ?
If I try to connect it via ActiveSync, fail, nor with K3firstAid. The only thing I recognize is the Huawei PC COM port. Appears only slightly illuminating the display, and nothing more.
I pray all the masters of this kind of cell phone to tell me that there is salvation, and if so, let me explain the process the "resurrection". (excuse the Google translation)
Thanks in advance
Click to expand...
Click to collapse
Could you upload a picture of the phone? + a picture of it inside?

I have not upgraded to the real HTC firmware, but with the wrong Chinese ROM, I accidentally made a flash from the model T5353, which does not comply, we reported the error at the 80% upgrade, is that I damaged the boot and communicate with the PC. Now I found the original ROM, all the tools we need to upgrade properly, but we need help to restore the PC communication, how to ActiveSync or any similar applications to recognize? Here are its hardware, you might be helpful:
· Operating system: Windows Mobile 6.5
· CPU: 520MHz Hisilicon-K3
· RAM: 256M, ROM: 256M, extend to 16GB max
· 4.3 inch touch screen, WVGA PX: 480 * 800

nboskic said:
I have not upgraded to the real HTC firmware, but with the wrong Chinese ROM, I accidentally made a flash from the model T5353, which does not comply, we reported the error at the 80% upgrade, is that I damaged the boot and communicate with the PC. Now I found the original ROM, all the tools we need to upgrade properly, but we need help to restore the PC communication, how to ActiveSync or any similar applications to recognize? Here are its hardware, you might be helpful:
· Operating system: Windows Mobile 6.5
· CPU: 520MHz Hisilicon-K3
· RAM: 256M, ROM: 256M, extend to 16GB max
· 4.3 inch touch screen, WVGA PX: 480 * 800
Click to expand...
Click to collapse
You technically don't have an HD2, as the hardware in your phone is COMPLETELY different.
So if you're looking for a definitive answer here, you probably won't get one, as there's very little relation between your phone and the real HD2.

Your pretty much screwed. Only option is to jtag, or move on.

Hello,
Recently I made a wrong flash ROM, and then I managed to turn on the mobile. I'm desperate and I hope you can help. After I returned from service, he could not do anything, I tried something at home. Basically, when I connect to the PC via USB, recognize it as a "new device", then install the IDT, then my PC recognizes it as "Huawei USB COM 1.0, COM port 7. The problem is that it constantly resets, and so at times he appears in the "Device Manager" and loses again. When he somehow managed to stabilize the relationship with the PC, you probably could I make a flash ROM via IDT. The IDT recognizes it, even after it lost 3 seconds. Obviously not a hardware problem.
Thank you so much in advance

cbadk said:
Could you upload a picture of the phone? + a picture of it inside?
Click to expand...
Click to collapse
There are pictures of my cell phone inside, and please if you know the pins for JTAG, mark them, perhaps it can solve the problem. Thank you very much

Hi me too using china clone HD2 same as your.
So i have use the method before you can copy the .bin file into a micro sd card and reboot your HD2 with below step.
1) switch off the phone.
2) format the Micro SD card to fat 32.
3) copy and paste the rom .bin into the card.
4) input the card into the phone.
5) hold volume key -and+ and switch on your phone.
6) i will start to boot into the SD card.

shawnsoc said:
Hi me too using china clone HD2 same as your.
So i have use the method before you can copy the .bin file into a micro sd card and reboot your HD2 with below step.
1) switch off the phone.
2) format the Micro SD card to fat 32.
3) copy and paste the rom .bin into the card.
4) input the card into the phone.
5) hold volume key -and+ and switch on your phone.
6) i will start to boot into the SD card.
Click to expand...
Click to collapse
Can you tell me what the exact name of the *. bin file? I know of that way, but I failed.

nboskic said:
Can you tell me what the exact name of the *. bin file? I know of that way, but I failed.
Click to expand...
Click to collapse
only hold green and red button(answer and disconnec button) and switch on the phone .the phone will restore factory setting without any bin or flash file .

Just buy another clone, OP. I dont think there's enough resource available (other than some xda china portal) to fix an HD2 knock off simply because they dont have the same hardware & software as official HTC ones.

Dell Venue Pro..I think I have a demo model

I got a Venue Pro yesterday. I purchased it on eBay. Hooked it up to perform updates and I couldn't. I constantly get error code 80070002
I have tried it now on two PCs on two different networks, one running Win 7 and the other running Win 8. I have looked on the net but can't really find anything helpful.
Anyway, never having had the phone before I found it odd that it came with a call and message history. Even after I reset the phone it still has a history, pictures of people from Facebook with pictures that are obviously professional shots. All messages are from people each other how great their new Windows phone is.
Also, if I don't use the phone for a couple of minutes it starts a phone demo video/slide show. I am now thinking I have a demo OS even though I can make calls and surf the net. Current OS is 7.0.7004.0
What can I do to totally wipe this phone and start from blank?
Thanks

You'll probably have to follow the instructions in "How to unbrick a Dell Venue Pro." No way to change a demo ROM into a retail ROM. You need to flash the retail ROM and start over.

If you still have the original rom installed on it, could you:
run the emapp tool and write down the contents of what it has?
As far as dell is concerned, I dont believe they normally make demo specific roms.
But that is in reference to their android devices and MS might have had them make an exception for the VP (and it's WP7)

TheManii has a thread over here where he's collecting this data.
Dial ##634# to enter the hidden Engineering Mobile menu.
http://forum.xda-developers.com/showthread.php?t=1479233

Thanks to all who replied. I got it fixed. It was indeed some weird demo ROM or setting but its all cleared up now. I used the unbricking thread listed here
http://forum.xda-developers.com/showthread.php?t=1411300
and downloaded the ROM from here
https://skydrive.live.com/?cid=4da87ed18e0bf92d&resid=4DA87ED18E0BF92D!7216&id=4DA87ED18E0BF92D!7216
I got the UpdateWP too from here
http://forum.xda-developers.com/showthread.php?t=1262471
Only thing to note is to extract the UpdateWP folder and put both files in to the Zune directory on your PC.
After that everything went relatively smoothly. It took 2 or 3 tries to get the Retail ROM to take and from there the phone updated perfectly until Mango. It failed but I just disconnected USB and reconnected and it ran the update.
Thanks again

Same boat
edderspcs said:
Thanks to all who replied. I got it fixed. It was indeed some weird demo ROM or setting but its all cleared up now. I used the unbricking thread listed here
http://forum.xda-developers.com/showthread.php?t=1411300
and downloaded the ROM from here
https://skydrive.live.com/?cid=4da87ed18e0bf92d&resid=4DA87ED18E0BF92D!7216&id=4DA87ED18E0BF92D!7216
I got the UpdateWP too from here
http://forum.xda-developers.com/showthread.php?t=1262471
Only thing to note is to extract the UpdateWP folder and put both files in to the Zune directory on your PC.
After that everything went relatively smoothly. It took 2 or 3 tries to get the Retail ROM to take and from there the phone updated perfectly until Mango. It failed but I just disconnected USB and reconnected and it ran the update.
Thanks again
Click to expand...
Click to collapse
Hi, I just got a phone in the same conditions you have had mention(demo mode), and I thought I have done and taken the same steps to flash my device, but with not avail, the skydrive file has been removed, and I was wondering if you maybe still have them(the files) somewhere and if I could "borrow" them. I mean I think I have the right ROM and the UpgardeWp, but maybe they are the wrong ones, because is NOT working for me.
Thank you very much and I hope you have a fantastic evening.
Israel
*UPDATE* never mind, I was able to do a proper flash, and now I have a good working Windows Phone...
Israel

edderspcs said:
Thanks to all who replied. I got it fixed. It was indeed some weird demo ROM or setting but its all cleared up now. I used the unbricking thread listed here
http://forum.xda-developers.com/showthread.php?t=1411300
and downloaded the ROM from here
https://skydrive.live.com/?cid=4da87ed18e0bf92d&resid=4DA87ED18E0BF92D!7216&id=4DA87ED18E0BF92D!7216
I got the UpdateWP too from here
http://forum.xda-developers.com/showthread.php?t=1262471
Only thing to note is to extract the UpdateWP folder and put both files in to the Zune directory on your PC.
After that everything went relatively smoothly. It took 2 or 3 tries to get the Retail ROM to take and from there the phone updated perfectly until Mango. It failed but I just disconnected USB and reconnected and it ran the update.
Thanks again
Click to expand...
Click to collapse
Hi
I am trying to do the same thing. But when I click the sky drive link to download the rom , there is nothing there. It asks me to login to windows live and thats it. Do you still have this rom downloaded and can you email it to me? OR where can I find this rom? Plz help.

In the middle of the "how to unbrick your dell venue pro" the rom is posted, on some russian download site.
http://forum.xda-developers.com/showpost.php?p=22415484&postcount=35
That file is hosted on my skydrive, and it is still available. It may be asking you to log in to your windows live account to access it. Not sure.

I got it ! Thank you so much!!!!!!!!!!!!!!!!!!!!!!!!!!!!

edderspcs said:
Thanks to all who replied. I got it fixed. It was indeed some weird demo ROM or setting but its all cleared up now. I used the unbricking thread listed here
http://forum.xda-developers.com/showthread.php?t=1411300
and downloaded the ROM from here
https://skydrive.live.com/?cid=4da87ed18e0bf92d&resid=4DA87ED18E0BF92D!7216&id=4DA87ED18E0BF92D!7216
I got the UpdateWP too from here
http://forum.xda-developers.com/showthread.php?t=1262471
Only thing to note is to extract the UpdateWP folder and put both files in to the Zune directory on your PC.
After that everything went relatively smoothly. It took 2 or 3 tries to get the Retail ROM to take and from there the phone updated perfectly until Mango. It failed but I just disconnected USB and reconnected and it ran the update.
Thanks again
Click to expand...
Click to collapse
hi All,
i got a working DVP after doing all steps mentioned in "How to unbrick DVP" after that when i connect my phone to Zune i am getting below error and i am not able to do anything with my phone (data tranfer,update, app install etc), please help meif you can:
ERROR: "RESTORATION ERROR" An error prevented the restoration of your phone to its previous verion.
ERROR CODE: C101002E
i have performed everything that is posted in XDA-developer about this error and when i tried to update/restore/backup from command promt using .cab file i got below error:
Id: \\?\usb#vid_045e&pid_0710#0a1846cd-8203-1781-bc2a-de1974852ebc#
{ca3d7387-f67b-11da-bbec-8000600fe800}
SN: cd46180a - 03828117 - bc2ade19 - 74852ebc
Name: Venue Pro
KITLName: QSD8XXX82BDB791
Manufacturer: DELL
ModelId: 1
Model: Venue Pro
MobileOperator:
Version: 07.00.07004.00-00000

Djha said:
hi All,
i got a working DVP after doing all steps mentioned in "How to unbrick DVP" after that when i connect my phone to Zune i am getting below error and i am not able to do anything with my phone (data tranfer,update, app install etc), please help meif you can:
ERROR: "RESTORATION ERROR" An error prevented the restoration of your phone to its previous verion.
ERROR CODE: C101002E
Click to expand...
Click to collapse
First thing I'd do is do a soft reset if you just flashed the stock 7004 ROM.
Windows Phone > Settings > About > Reset your phone.
Then, just a guess -- go into Zune Desktop > Settings > Phone > Sync Options > [Forget this phone]
Then plug the phone again and see if it lets you set it up as a new device, with update check.
If this doesn't work, the next thing I'd try is moving to another Windows machine, installing a fresh copy of Zune Desktop, and seeing if it will let you update using that. You could also use a Windows installation in virtualization using virtualbox, or an installation on another partition if you are an advanced user.
Basic troubleshooting. Just floating ideas.

Nothing worked
Technosquid said:
First thing I'd do is do a soft reset if you just flashed the stock 7004 ROM.
Windows Phone > Settings > About > Reset your phone.
Then, just a guess -- go into Zune Desktop > Settings > Phone > Sync Options > [Forget this phone]
Then plug the phone again and see if it lets you set it up as a new device, with update check.
If this doesn't work, the next thing I'd try is moving to another Windows machine, installing a fresh copy of Zune Desktop, and seeing if it will let you update using that. You could also use a Windows installation in virtualization using virtualbox, or an installation on another partition if you are an advanced user.
Basic troubleshooting. Just floating ideas.
Click to expand...
Click to collapse
Thanks for your reply.
1. when i clicked on "Desktop > Settings > Phone > Sync Options >" it shows "connect a device" and i am not able to connect my phone becouse after error pop-up, there is only one option "close" and after click on close zune shows "no device connected".
2. i have already tried it on 2 PCs, suggest me other option please.

Djha said:
Thanks for your reply.
1. when i clicked on "Desktop > Settings > Phone > Sync Options >" it shows "connect a device" and i am not able to connect my phone becouse after error pop-up, there is only one option "close" and after click on close zune shows "no device connected".
2. i have already tried it on 2 PCs, suggest me other option please.
Click to expand...
Click to collapse
If you've also tried doing the soft reset as I mentioned, you may want to see if you can use the cab sender method to update to one of the nodo builds.
http://forum.xda-developers.com/showthread.php?t=1306415
A couple quick questions --
Was this your phone and had it been working previously, or was it in this "connect to PC screen" state when you got it?
Can you think of anything you might have done to cause it to stop working?
Is it the AT&T, T-Mobile, or EU/International version?
Did you use a non-english language cab?

Answers:
Technosquid said:
If you've also tried doing the soft reset as I mentioned, you may want to see if you can use the cab sender method to update to one of the nodo builds.
http://forum.xda-developers.com/showthread.php?t=1306415
A couple quick questions --
Was this your phone and had it been working previously, or was it in this "connect to PC screen" state when you got it?
Can you think of anything you might have done to cause it to stop working?
Is it the AT&T, T-Mobile, or EU/International version?
Did you use a non-english language cab?
Click to expand...
Click to collapse
1. yes, i tried a soft reset(resetting the phone from settings->about phone->reset phone) even also perform a soft reset without SD card and try to update from zune without SD card but still getting same restoration error.
i already tried all options cab sender, mangoforall 0.2 etc/ update and restore from command promt:
getting below error everytime whenever i tried to perform any thing from command promt(.bat) :
Error: Exception from HRESULT: 0x801812C0
Call stack:
at wm7update.Program.UpdateDevice(IDeviceInfo deviceInfo, List`1 updates, Upd
ateType type)
at wm7update.Program.Main(String[] args)
2. this is not my phone i got it in a non working state showing "SD card not working".. then i performed steps mentioned in "how to unbrick DVP". after that i got a working DVP.
3. It is a T-mobile DVP and sim unlock by unlock code provided by dell.
4. It is on 7004 Tmobile ffu no cab update til now, as i am not able to send any cab via cab sender.
Note: i don't have any previous back-up of this mobile and not sure wheather the SD card is original or not.