[Q] HD2 Advice... - HD2 General

Hey guys, i'll make this post as breif as possible.
I recently aquired an HTC HD2 which I love. It came pre-installed with windows phone 7 however for the past month i've been running android from the SD card. I've only booted WPH for aabout 10 mins max!
Im just wondering if someone can link me to a guide/ advise me of the best way to install android to the NAND, overwriting WPH7. I/ve read about the HD2 NAND toolkit, could I use this & this alone?
I'd like to option to try WPH7 again in the future but for now, I'd like a nice stable gingerbread rom on it. THe device has MagLDR 1.13 installed on it.
Can someone help me? I;ve previousy owned a ZTE blade which I converted to GEN2 & ran gingerbread/cyanogenMOD quite happily so I'm not 100% noob.
THanks. (sorry if i've asked in the wrong place.

http://forum.xda-developers.com/showthread.php?t=893948

Thanks dude, that looks like all I need. Is it exactly the same regardless of the fact I already have WP7 on there?

cardyology said:
Thanks dude, that looks like all I need. Is it exactly the same regardless of the fact I already have WP7 on there?
Click to expand...
Click to collapse
start from #2 because you already have magldr on there.
Also note to get your SD card back to where you want it you have to put it in a card reader on your PC and repartition it to fat32.

Related

[Q] Easiest to follow Android on HD2 guide?

I've read through most of the guides now & to be honest don't understand a lot of them & as well as which my HD2 is (was) UK TMobile & factory unlocked then debranded (after a lot of help on here) by me
I'm not a complete idiot (close to) when it comes to technical things but this is my first HTC phone & I was considering selling it for the Desire HD when I read that the HD2 with the WP7 Android software was every bit as good.
I can see there are two versions one being on an SD card & one using the phones memory. Is there a very simple guide or should I steer clear?
Thanks for your help in advance guys
Junks
I also would like to know since i just pick up a HD2 as my backup phone. I would prefer to have android and no windows on this phone.
I'm very familiar with flashing and android since my primary phone is a Vibrant.
sorry for hijacking your thread OP since i see no reason to create another thread asking almost the same question.
Blkegk said:
I also would like to know since i just pick up a HD2 as my backup phone. I would prefer to have android and no windows on this phone.
I'm very familiar with flashing and android since my primary phone is a Vibrant.
sorry for hijacking your thread OP since i see no reason to create another thread asking almost the same question.
Click to expand...
Click to collapse
No probs matey
I'm new to this too but I understand that you can run Android on your SD card (at least 4gb class 4 Sandisc from what I read - although I opted for 16gb Class 4 MicroSDHC for about £15) if you want to keep Winmo on your phone system.
NAND builds replace your winmo operating system completely.
I read its not a bad idea to keep androis on SD as you can use Winmo to update builds that may have bugs or improvements.
I see today that there's a guy buidling a multi-android boot up so as your phone starts I guess you can choose Winmo or choose from a few android builds, depending on what each build gives you.
Some builds have everything but are slow, some are thin on features but fast.
I'm yet to install one so I can't speak with any knowledge - I'm hoping to do it today using this guide
http://forum.xda-developers.com/showthread.php?t=881958
Good luck.
Cheers
Thanks for that Darrell, I had read that guide but had been told that installing on the SD cards slowed up the phone so was really after installing on the phones memory
http://forum.xda-developers.com/showthread.php?t=893948
might want to read that if you havent already
Thanks Richy - hadn't seen that one!
I'm thinking of getting an HD2 phone used to install Android too. I'd probably want to run it on the SD so that WM6.5 or WP7 can be run on the NAND.
Where did you read it was slower on the SD ?
Junks666 said:
I've read through most of the guides now & to be honest don't understand a lot of them & as well as which my HD2 is (was) UK TMobile & factory unlocked then debranded (after a lot of help on here) by me
I'm not a complete idiot (close to) when it comes to technical things but this is my first HTC phone & I was considering selling it for the Desire HD when I read that the HD2 with the WP7 Android software was every bit as good.
I can see there are two versions one being on an SD card & one using the phones memory. Is there a very simple guide or should I steer clear?
Thanks for your help in advance guys
Junks
Click to expand...
Click to collapse
Give this a try ..
http://forum.xda-developers.com/showthread.php?t=981811
The only limitation of that FAQ is that it doesn't have a clockworkmod guide which some of the NAND roms use.
http://forum.xda-developers.com/showthread.php?t=898913
WarlockW said:
Give this a try ..
http://forum.xda-developers.com/showthread.php?t=981811
Click to expand...
Click to collapse
Thanks Warlock - I don't understand that at all!! lol
Ok I've found a guide that I can follow
http://forum.xda-developers.com/showpost.php?p=11215136&postcount=8
Two things if someone can help please though
I've decide on either JDMS or PRJ Build Nands but.............
1. I can't find out how to downgrade from SPL-3.03 or find the relevant files?
2. I've just managed to debrand the phone using HSPL2, will this affect anything or the steps which have to be done?
Thanks guys

Need HELP! Need step by step instructions to get Android on my phone!

Alright, so I bought a used HD2 for $150 today and gave my fiancee my rooted Galaxy S running Bionix 2.2. Now I have this Windows 6.5 phone and no clue how to get it to run Android.
I have looked across the forums and all it does it make my head begin to smoke, lol. I am completely and utterly lost. I'd like to be able to boot into the multiple OS's, Android (preferably the HyperDroid ROM), Win7, and whatever the main third one is, and get that cool "Resistance is Futile" boot screen.
Right now though, I am reading about MAGLDR and stuff and it's saying I need radio and this and that and I have no clue what its talking about, nor any of the other stuff. I am quite surprised I was even able to root and ROM my Galaxy S, though I used a one click root and the ROM was a simple install.
Please help a daft idiot who is in dire need of some Android, lol.
EDIT:
Read this on the tmobile forum. I know nothing about radios, but I like the sound of the improved reception and battery life.
You will need to go to the XDA Developers website and find the ROM Development section. There are many to choose from. I use the Energy Sense with Cookie Classic and GTX ROM using the Froyo Sense 3.1 build. Also search for the thread on increasing the battery life. Changing the registry line code made a world of difference for me. Now I can easily have my HD2 in standby mode with auto sync and WiFi on for two days on one charge with light use. I am now using the Android 2.2 build as my daily OS. I am currently using radio 2.14.50.04 and previously had 2.12.50.02. Battery life on the newer radio for me is better when the phone is in use, about the same when not in use but the cell reception is much better than before.
Click to expand...
Click to collapse
First place to go: http://forum.xda-developers.com/showthread.php?t=893948
Thanks man!
Now, if I use that method to get Android on my phone, will I later be able to have it dual boot with Win7, or triple boot with Win7 and Ubuntu?
It's not possible to 'thriple boot'.
Basically these are the steps you need:
Flash HSPL 2.08 on your HD2.
Flash the newest radio (2.15.50.14).
Flash MAGLDR.
Just look around for the links. They're all in the stickies anyway.
After that you csn flash WP7 to NAND and Android to the SD Card so you can dual-boot both. That's basically it.
Also, look on YouTube, there are handy guides on there.
Skellyyy said:
It's not possible to 'thriple boot'.
Basically these are the steps you need:
Flash HSPL 2.08 on your HD2.
Flash the newest radio (2.15.50.14).
Flash MAGLDR.
Just look around for the links. They're all in the stickies anyway.
After that you csn flash WP7 to NAND and Android to the SD Card so you can dual-boot both. That's basically it.
Also, look on YouTube, there are handy guides on there.
Click to expand...
Click to collapse
I read on these very forums that its possible to triple boot, all the way up to quintuple boot. Someone made different splash screens for all the different boot OS's.
But thanks for the help though, I'll at least have Android soon enough.
Specialk47150 said:
I read on these very forums that its possible to triple boot, all the way up to quintuple boot. Someone made different splash screens for all the different boot OS's.
But thanks for the help though, I'll at least have Android soon enough.
Click to expand...
Click to collapse
If as u say "Triple or Quintuple boot" means running either WP7 or WinMo 6.5 exclusively as a base, then running multiple builds of android "SD style" ? Then yeah u could do dat....But u can't have both WP7 & WinMo 6.5 on d same device as they both need exclusive storage in d same memory location....hweva if d above has been made possible? then pls do reply adding d link of such a post as i'm curious as 2 how it was pulled off.
uxu said:
First place to go: http://forum.xda-developers.com/showthread.php?t=893948
Click to expand...
Click to collapse
Thank you! Helped for me
No sorry. It's not possible. What's possible is to do is to boot WM and Ubuntu, WM and Android, WM and MeeGo (not yet released), WP7 and Android and possibly Android/WP7 and Ubuntu. Not too sure if you can do the last one. It's possible to have four OS' on the HD2, but not at the same time so it's not really 'triple booting' or 'quadruple booting' as you can only have two running at the same time.
No point in trying to contradict me dude.
Oh and btw that bootscreen you just flash from HSPL. Somebody could make one with an Apple logo, that doesn't mean it can run iOS.
Got it, running bluetopia now, you guys are awesome.
EDIT: NVM, got everything I needed, thanks all.

Boot from SD card with Aria

Hello all,
Like everyone else who is desperate to run a newer version of Android on their Arias, I was thinking of one last thing to try: Is it possible to boot your phone from a ROM put on your SD card or is that out of the question now because of what HTC did. I was thinking that if it were possible it would be suggested by now, but I could not find it.
Thanks for the info
jn0n said:
Hello all,
Like everyone else who is desperate to run a newer version of Android on their Arias, I was thinking of one last thing to try: Is it possible to boot your phone from a ROM put on your SD card or is that out of the question now because of what HTC did. I was thinking that if it were possible it would be suggested by now, but I could not find it.
Thanks for the info
Click to expand...
Click to collapse
newer version of android? we have 2.3 on our arias lol...
you mean like the nook? as far as I know, no. however there is a mod somewhere in the android dev thread for dual boot I think...

Where do I start?

I have HTC HD2 USA Tmobile in its original state.
I'd like to have dualboot with currect OS and Android (latest is 2.3?) and also win phone 7
Dont know where to start...
What i do understand is that i can try different ROMS for android and so forth, but i have no idea where to start.
Thanks for your help (ALL)!
first you can try an android sd build. cause it has no risk and very easy to flash. no hspl etc. after some time you can pass to a nand android. i don t think you will want winmo after android.
darkredphantom said:
I have HTC HD2 USA Tmobile in its original state.
I'd like to have dualboot with currect OS and Android (latest is 2.3?) and also win phone 7
Dont know where to start...
What i do understand is that i can try different ROMS for android and so forth, but i have no idea where to start.
Thanks for your help (ALL)!
Click to expand...
Click to collapse
I'm new here too, but as far as I know, there is no real way to boot WinMo, Android and Windows Phone 7. You can only do WP7 and Android or WinMo and Android, or just Android off of NAND af course. I may be wrong, but I don't think there are SD builds of WP7. Also, I agree with mutil, use an SD build (I recommend AmeriCanAndroid).
Nigeldg said:
I agree with mutil, use an SD build (I recommend AmeriCanAndroid).
Click to expand...
Click to collapse
Thanks all!
can someone provide me a link on where to go to get an SD Build, please understand im very new to the phone scene.
tys!
darkredphantom said:
Thanks all!
can someone provide me a link on where to go to get an SD Build, please understand im very new to the phone scene.
tys!
Click to expand...
Click to collapse
Check the SD section. Lots of us devs have provided options with instructions.
Sent from my AmeriCanAndroid HTC HD2 using XDA App

NAND vs. SD method

Hi
A friend of mine asked me if I could put Android on his HD2 as he bought one with German language and he doesn't understand anything at all. Now we wan't to completely remove Windows Mobile 6.5.x from the phone and install Android. ICS with HTC sense is prefered but and older version will also do.
I have found multiple tutorials, but I wonder which method is the best. NAND or SD?
At this point in time we don't have any SD-card in the phone, so I asume the Sd method isn't usable. But which method and ROM is the best to use if we want to be able to switch language and want Android experience as close to the HTC android phones as possible.
Are there any bugs with the HD2 in Android? I've heard that there should be problems with the sound when calling people, and the data-connection should be unstable as well. Are these rumors still current or have they been solved?
CTSRP said:
Hi
A friend of mine asked me if I could put Android on his HD2 as he bought one with German language and he doesn't understand anything at all. Now we wan't to completely remove Windows Mobile 6.5.x from the phone and install Android. ICS with HTC sense is prefered but and older version will also do.
I have found multiple tutorials, but I wonder which method is the best. NAND or SD?
At this point in time we don't have any SD-card in the phone, so I asume the Sd method isn't usable. But which method and ROM is the best to use if we want to be able to switch language and want Android experience as close to the HTC android phones as possible.
Are there any bugs with the HD2 in Android? I've heard that there should be problems with the sound when calling people, and the data-connection should be unstable as well. Are these rumors still current or have they been solved?
Click to expand...
Click to collapse
Ok. First of all, Nand is the better of the two. As your friend want to COMPLETELY remove winmo6.5 its better to use NAND. Currently there is no ICS sense rom but the sense gingerbread roms work very smoothly with all features working. So you may want to try that. And dont worry you can change language from german to english. You basically select english at the startup setup.
One more thing. Even when installing the NAND version of android you will need a sd-card. The rom is a .zip file which must be copied to the sd card and this rom will be installed on the phones internal memory hence: NAND.
Hope it helps
Feel free to ask but i suggest you search it first and read more, because clearly you are lacking information
adil1508 said:
Ok. First of all, Nand is the better of the two. As your friend want to COMPLETELY remove winmo6.5 its better to use NAND. Currently there is no ICS sense rom but the sense gingerbread roms work very smoothly with all features working. So you may want to try that. And dont worry you can change language from german to english. You basically select english at the startup setup.
One more thing. Even when installing the NAND version of android you will need a sd-card. The rom is a .zip file which must be copied to the sd card and this rom will be installed on the phones internal memory hence: NAND.
Hope it helps
Feel free to ask but i suggest you search it first and read more, because clearly you are lacking information
Click to expand...
Click to collapse
Thanks for the quick reply. I will read further on how to install using NAND method. But how big should the SD-card be. As said he doesn't have a SD-card in his phone. I have one but it's only 128MB, so not a whole lot. If the phone was using the MiniSD cards instead of microSD I had a 1GB card. But isn't it possible to get a Gingerbread HTC Sense ROM and then extract and repack it on the PC so it can fit the 128MB card. Or are the packed ROM's small enough to fit on a 128MB card?
Tell your friend to invest in about 4GB or more, once you've got a few apps, video video clips, music files and recovery backups then the 4GB will be eaten fairly fast imo. If you grab a class 6 card you can get one for less then $1/GB (aud).
parker09 said:
Tell your friend to invest in about 4GB or more, once you've got a few apps, video video clips, music files and recovery backups then the 4GB will be eaten fairly fast imo. If you grab a class 6 card you can get one for less then $1/GB (aud).
Click to expand...
Click to collapse
Sure I'll tell him that. But will the installationsfiles for Android fit on my 128MB card?
CTSRP said:
Sure I'll tell him that. But will the installationsfiles for Android fit on my 128MB card?
Click to expand...
Click to collapse
No.
CTSRP said:
Thanks for the quick reply. I will read further on how to install using NAND method. But how big should the SD-card be. As said he doesn't have a SD-card in his phone. I have one but it's only 128MB, so not a whole lot. If the phone was using the MiniSD cards instead of microSD I had a 1GB card. But isn't it possible to get a Gingerbread HTC Sense ROM and then extract and repack it on the PC so it can fit the 128MB card. Or are the packed ROM's small enough to fit on a 128MB card?
Click to expand...
Click to collapse
Dont forget the thanks button
Anyways, basically the sd card is used to put the rom in and all music, pics, apps etc. will be stored on the sd card. plus, the 128 mb card will not hold the rom. Some files of the rom are installed on the sd card as well(some) so yeah, like the above user said, invest in a class 4 sd card with a fairly high amount of memory.
try the link below, it could give you an idea
You will need an SD card anyhow as mentioned before. Not only for flashing it to Nand, also some ROMs needs an ext(2 or 3) partition on the SD card. Specially when it's an EU device as yours might seems.
F.e.: I got an EU model and the great Energy ROM running - this needs a 1Gb ext(2 or 3) partition on the SD card!
-> It depends on the ROM of your choice.
Right now, I guess there is now ICS ROM with sense out there - or an I wrong?
I can definetly recommend the NRG ROM as this one runs really great. There is also a very good lashing instruction in its thread.
Good luck :good:
Ooh, ooh, me too!!
adil1508 said:
Ok. First of all, Nand is the better of the two. As your friend want to COMPLETELY remove winmo6.5 its better to use NAND. Currently there is no ICS sense rom but the sense gingerbread roms work very smoothly with all features working. So you may want to try that. And dont worry you can change language from german to english. You basically select english at the startup setup.
One more thing. Even when installing the NAND version of android you will need a sd-card. The rom is a .zip file which must be copied to the sd card and this rom will be installed on the phones internal memory hence: NAND.
Hope it helps
Feel free to ask but i suggest you search it first and read more, because clearly you are lacking information
Click to expand...
Click to collapse
I also want to completely remove winmo6.5 from my wife's stock UK HTC HD2 and put some form of Android OS on it so I can then get her Ovivo Mobile mobile connection to work (I'm not bothered about dual boot functionality). Could you quickly link to a guide you would recommend to do this ("Thanks" will always be given :good: ).
(Note: I had an HD2 once, and bricked it after 9 months of ownership with a dodgy radio, so I'm a bit once-bitten-twice-shy about doing it).
shaggydabbydo said:
I also want to completely remove winmo6.5 from my wife's stock UK HTC HD2 and put some form of Android OS on it so I can then get her Ovivo Mobile mobile connection to work (I'm not bothered about dual boot functionality). Could you quickly link to a guide you would recommend to do this ("Thanks" will always be given :good: ).
(Note: I had an HD2 once, and bricked it after 9 months of ownership with a dodgy radio, so I'm a bit once-bitten-twice-shy about doing it).
Click to expand...
Click to collapse
Here is my favourite guide. It's incredibly simple. You should really search before posting though, it isn't difficult to find.
Thanks
Nigeldg said:
Here is my favourite guide. It's incredibly simple. You should really search before posting though, it isn't difficult to find.
Click to expand...
Click to collapse
Thanks (and "thanks" added). I did search [and read the "sticky") but there were lots and I got confused as to which one. I'll give the one you recommend a go (which incidentaly did not come up in my [brief] search. :good:
shaggydabbydo said:
(which incidentaly did not come up in my [brief] search. :good:
Click to expand...
Click to collapse
Ah, you see, it shouldn't be [brief] but [thorough]
Nigeldg said:
Ah, you see, it shouldn't be [brief] but [thorough]
Click to expand...
Click to collapse
Ah, but I would have been thoroughly confused with a thorough search, fortunatly I was only briefly confused .

Categories

Resources