Database Users

Killed Wizard! Need Help!!

My wizard freezes at splash screen.
I can start it in boot loader and install a new Rom, i´ve tried Wizard Love and still couldn´t make it work.
For last i tried a original one, WWE from UK Vodafone), but after reset, frezzes in the same place.
Could it be a processor problem? I dont´t think so, because it is working but i just don´t know what else to do...
Please help!!
With the wizard_love rom, i flashed it in my device, it starts up after doing this, but stops at splash screen.

I am a total newb but out of curiosity, how long have you let it sit at the splash screen before calling it?

hello
could you first explain what u did? that caused this, or did it just happened al of the sudden?

It all started in the morning, i try to turn it on and it just stoped in the splash screen like i said.
I just don´t know what else to do.

I had the same problem yesterday. Tried a lot to let my phone work again. It worked after I started the phone pluged to the charger. I hope It works for you.
BTW. in my situation it just started from out of nothing.

I´m Able To Say My Problem Is Solved!!!
Thanks to Drug Store, i solved it!!
CID unlocked it, it was necessary to copy OS to SD card!
Just followed his indications!
Very easy!
Thank´s a lot man!!
IT LIVES!!!

Atom flash ROM Success, stuck at Update Utility Screen

Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,

bennyyen said:
Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
Click to expand...
Click to collapse
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.

brian_2cool4u said:
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
Click to expand...
Click to collapse
Thanks for your reply, can u guide me how to go to bootloader and reflash ?

bennyyen said:
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
Click to expand...
Click to collapse
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you

brian_2cool4u said:
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
Click to expand...
Click to collapse
Thanks brother it helped my Atom Exec also (Oh I was sweating ).

tjkhattak61 said:
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
Click to expand...
Click to collapse
No problem, I was sweating and crossed my finger when that happend to my unit before. I thought i'll say goodbye to my atom.
glad to help =)

I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !

Where did you aquire this Chinese rom, perhaps you must ask the author or you could keep reading, try the Wiki!

bennyyen said:
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Click to expand...
Click to collapse
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442

tjkhattak61 said:
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
Click to expand...
Click to collapse
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !

bennyyen said:
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
Click to expand...
Click to collapse
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one

brian_2cool4u said:
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
Click to expand...
Click to collapse
Thanks brian_2cool4u, will try later...

Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....

bennyyen said:
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
Click to expand...
Click to collapse
Hmmmmm thats odd? it should have been fix, oh well better get advice from where you got the rom or do a little reading in the wiki

Already can connected and flash any ROM, but new problem come out.
Comupter stuck at Stage 5 0% among 3 hrs still maintain 0%, but my device show Burn Radio MOT 100% completed
So i try to unplug the USB cable, my computer immediatly show Connection Error. After i hard reset my device, everything OK except No Radio ( NO GSM ).
Any advise
Thanks & Regards,

ROM update freezing

Hi guys,
A few months ago I updated from O2s 6.1 to a 6.5 ROM.
Now I want to go back the O2 ROM but the update freezes at 34%. The popup box says it lost connection with the phone.
I tried installing HardSPL but it didnt help. So I tried a hard reset but now I just get a RGB screen with
POLA200 MFG
SPL-2.20.OliNex
CPLD-2
Any suggestions in sorting my problem would be appreciated
Many Thanks

rikpotts said:
Hi guys,
A few months ago I updated from O2s 6.1 to a 6.5 ROM.
Now I want to go back the O2 ROM but the update freezes at 34%. The popup box says it lost connection with the phone.
I tried installing HardSPL but it didnt help. So I tried a hard reset but now I just get a RGB screen with
POLA200 MFG
SPL-2.20.OliNex
CPLD-2
Any suggestions in sorting my problem would be appreciated
Many Thanks
Click to expand...
Click to collapse
First of all check your USB cable... and choose another USB port to connect the cable and try to flash your ROM again

Try this as it has been solved before may help you out
http://forum.xda-developers.com/showthread.php?t=425922

same problem
hi everyone. I have a big problem with my htc touch cruise when I installed a hard spl htc dedicate a Diamond.donc I had a white encrant after I did a hard reset since my htc no longer I have a black encrant are neither green nor orange but when I connect with the pc I am data interface and it does not recognized my htc. In my pay is not qualified repairman three non réparé.aidé unable to please me I tried the commands mtty.exe but does not c I do not really know how it works.
thank you for your patience and for help

Many Thanks for the replies.
I followed the link and i'm confident it will solve my problem. Unfortunately I cannot get mtty to offer "USB" from the dropdown. I remember going round in circles trying to get USB show a few years ago with a SPV C550.
If anyone can help me, that would be great. I'm using Vista. This might be why the steps in both the initial post and replies on the first page don't work for me.

[Fixed] Dead hd2 - help needed

NOW ITS FIXED. THANKS
Dear all,
after experimenting quite a few cooked rom, my hd2 stoped working all on a sudden. When i tried to switch it on it came only the white screen with green htc written on it. And it (white screen) stucked and used to stay on. I took the battery off and switched on again it remained same. Just before a while i tried again, now the white screen coming for a second and no more pulse. Please advice me.
Thanks in advance.
Zaman

connect your phone to your PC via ActiveSync/WMDC and run your stock ROM and see if that helps...even with no ROM on the phone Windows should still show connected

http://forum.xda-developers.com/showthread.php?t=609477
*Go into BootLoader Mode (turn off phone, then press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear). Verify the screen shows SPL-1.42.HSPL, which is the HardSPL version*
Click to expand...
Click to collapse
If you get tri-colored screen you can flash any ROM that you want without ActiveSync ... one of the advantages of HSPL if you have one installed.

Thanks again,
its not the tricolour screen.
It doesn't connect with the pc through active sync. As i tried to go for another rom after it got stuck.
Really worried a bit.

Sorry bro, i got it what you said. I got the tri colored screen after following your instruction.but its staying for a second and going off. I have done the hspl installed before. Any more advice would really be of very helpfull.
Thanks

Which ROM/radio are you using? If you've got HSPL installed it shouldn't be difficult to get it working again, you should just need to flash to a compatible ROM and radio.

[email protected] said:
Sorry bro, i got it what you said. I got the tri colored screen after following your instruction.but its staying for a second and going off. I have done the hspl installed before. Any more advice would really be of very helpfull.
Thanks
Click to expand...
Click to collapse
If you have HSPL and can see tri-color screen on display ... just plug in usb cable (that is connected to PC) in HD2 and start flashing process again the same way that you did before. I suggest you flash some of the official ROMs.

Thanks _x_
after having seen tricoloured screen i connected it with usb cable and flashed as normal. It did work for. And the phone is alive again.
Thanks to all of you for your attention and helps.
Cheers.

Glad I could help but it is "bepe" that you should thank to for HSPL
http://forum.xda-developers.com/showthread.php?t=611433

can you also change the thread title.. Add "Fixed"

help

Hi,
MMymate just installed 6.5,nowthething has crashed, it boots up as far as the start screen with windows 6.5. i am a novice to this and if anyone can help its appreciated
lee

I would 1 hardreset
2 if that did not help reflash

i have done the hard reset, where i get the tri colour screen, nothing,how do i do the next stage, sorry new to all this.

Read the stickies. Tells you everything you could ever possibly need to know in them.

twinboys said:
Hi,
MMymate just installed 6.5,nowthething has crashed, it boots up as far as the start screen with windows 6.5. i am a novice to this and if anyone can help its appreciated
lee
Click to expand...
Click to collapse
Did your mate follow this guide for flashing?