My Device is dead after flashing Dutty's Rom
It was black screen with the logo ,Diamond 2.. and no response
What can i do for my D2,Help
I installed SPL before, what the hell
Help ME pls~~
you probably already did hard reset ...
It's not dead. Flash hspl 1.83
You can find it in the rom development forum.
Go into bootloader mode (phone off, press vol down + power button till you get a screen with colours), connect ur phone to the computer and when you have a ROM image, if it's .nbh, just rename it to TOPAIMG.nbh and move it to SD-cards root folder. If it's a .exe just extract all the files from it using WinRar, rename the .nbh file to TOPAIMG.nbh and move to SD-cards root folder.
* Be sure to have at least 30% of charge.
* Turn off your device by using the Power Button.
* Go to Boot loader mode. Push and hold Vol. Down + press Power button.
* After that your device with have a white screen with text " Press to power button for continue upgrade or Press Volume down button for cancel upgrade , select press to power button and it will start upgrade Rom.
I got a screen with colour.....But I really don't know the next step, it s diffcult. I could n't find my SD-cards in my PC
PLS Help me
Use Cardreader in your PC....
thx for help.
Done
Well, im going back to wm 6.5 so I can reinstall WP7 WITH my sd card so When i do Volume Down+ Power nothing comes up til i remove the power and put it back on and it works
And what´s the question now?
How can I get to the bootloader?
I really need to go back to Wm6.5 so i can reinstall
Wp7 with my SD card so it can get formatted
Keep volume down button pressed while pressing the power button to turn on the phone, to take it into the tricolor screen, if volume down doesn't work try volume up
just do a hard reset, turn off the device, hold down VOL up AND VOL down, whilst holding them tap the power button
oh make sure youre SD card in this time!
or if that doesnt work, boot to MAGLDR (hold down the end call button on the right hand side whilst turning on) go to usb flasher mode, insert USB cable and run the installer from the PC again
you dont need to go back to WM, although some have said it made it more stable, personally i havent seen that.
Ok thanks, I will try that later so if my dad doesn't like it, i can revert back!
Hi all,
I tried rooting my Nook today following this procedure using unooter
http://wiki.cyanogenmod.com/wiki/Barnes_&_Noble_Nook_Color:_Full_Update_Guide
I got up to Gaining Root Access. After unplugging from the pc the nook won't power up.
After than the nook will not turn on. Hold the power button down, or all the buttons, nothing.
I plug the charger in and the green 'n' light on the usb cable is always green. Also when plugged into my PC and Mac.
If I plug into a Mac, it recognises it as an additional Ethernet device.
I tried restoring based on this thread:
http://forum.xda-developers.com/showthread.php?t=914690
But no luck. Nook won't boot or startup.
Any thoughts??
In either of those processes, did you create a bootable ClockworkMod Recovery SD card? If not, grab this image, extract it, and write it to your SD card:
1GB CWM Card
It doesn't matter how big your card is, the 1GB image will work for our purposes. After you write the image, put these two files on the card (do not unzip):
update-nc-stock-1.2-keepcwm-signed.zip
repartition-boot-with-stock.zip
Hopefully you'll only need to use the first one. Put the card in the NC and attempt to power on--hopefully it will boot to the recovery menu on the card. Volume buttons are up/down, home is select, power is back.
First, in mounts and storage format system and data. When done, go back to the main menu (power button). This step may not be necessary, but won't hurt.
Now, install zip from sdcard > choose zip from sdcard, and try update-nc-stock-1.2-keepcwm-signed.zip.
When it's done installing, hold the power button until the NC shuts off, remove the card, and power back on. If this works, the first boot will take a few minutes.
If it doesn't work, put the card back, boot to recovery again, install zip from sdcard > choose zip from sdcard, and try the repartition boot zip.
Let us know how it goes.
Hi everybody,
First, sorry for my poor english, i try to explain the best i can.
My HD2 is on one of the first Phone 7 release 01/2011 ago.
I want go back on stock rom, cause recently, i've a bug, my phone can't boot. It stay on Phone7 logo and next reboot.
Without my SD card, the phone boot, but it's in english, and My computer recognyze it on " Windows Phone7 " with yellow exclamation point.
I've tried to flash 6.5 stock rom with usb cable, but it's said it can't connect the device.
To go on flash screen, i push reboot+power off+ vol down button. Next on emagldr 1.13 screen, i select "5.usb flasher".
Next i can check on my computer's now recognyzed as " Microsoft USB Sync", but the stock rom still not abble to work:" no phone response, check usb cable"
I'm sure that my usb cable is working.
Any suggestion ?
You might try going into the normal bootloader, not into MAGLDR.
Push both vol. down and power buttons until the device starts into the multicolor bootloader screen, then connect the USB cable.
If you didn´t change your PC, it should now be able to connect via ActiveSync.
tictac0566 said:
You might try going into the normal bootloader, not into MAGLDR.
Push both vol. down and power buttons until the device starts into the multicolor bootloader screen, then connect the USB cable.
If you didn´t change your PC, it should now be able to connect via ActiveSync.
Click to expand...
Click to collapse
Thanx for your answer, i think the bug is here i cannot enter normal tri-color bootloader, it doesnt work :s
When i do power+ vol down until the device start, i first have a blank Htc screen maybe 1sec, and quikly next boot menu from MAGLDR 1.13
However, i'm sure that my Vol Down button work, it works on magldr menu.
try pulling out the battery, then hold down the two volume buttons, as hard as you can safely get away with, pop the battery back in whilst still holding buttons down, if it doesnt start tap the power button. keep holding down the buttons through out the whole process until it comes on.
if you can read the content of your sd card in pc then you can flash WinMo6.5 rom via sd card.... :
- go to HTC website, download appropriate rom for your HD2 with your s/n
- extract NBH file from downloaded ROM (can be done with 7-zip, Winzip...)
- rename extracted IMG file to LEOIMG.NBH
- copy that file to SD card
- boot your HD2 with SD card while holding VOL DOWN
- you should see a flash menu appear, press VOL DOWN again (if i remember.. ) and you'll flash 6.5 rom
- that's it, you'll have new instance of WinMO 6.5, with stock SPL, without MAGLDR and ANY trace of WP7.-..
oh, if you dont see anything on your SD card or you cant copy to it, it is locked and you have to format it either with some utility or in a Nokia N, E series phone... I know for a fact that N79 works
this should do the trick...
sb2003 said:
if you can read the content of your sd card in pc then you can flash WinMo6.5 rom via sd card.... :
- go to HTC website, download appropriate rom for your HD2 with your s/n
- extract NBH file from downloaded ROM (can be done with 7-zip, Winzip...)
- rename extracted IMG file to LEOIMG.NBH
- copy that file to SD card
- boot your HD2 with SD card while holding VOL DOWN
- you should see a flash menu appear, press VOL DOWN again (if i remember.. ) and you'll flash 6.5 rom
- that's it, you'll have new instance of WinMO 6.5, with stock SPL, without MAGLDR and ANY trace of WP7.-..
oh, if you dont see anything on your SD card or you cant copy to it, it is locked and you have to format it either with some utility or in a Nokia N, E series phone... I know for a fact that N79 works
this should do the trick...
Click to expand...
Click to collapse
except he hasnt been able to get in to the bootloader as the previous posts to your suggest
dazza9075 said:
except he hasnt been able to get in to the bootloader as the previous posts to your suggest
Click to expand...
Click to collapse
huh, must be that i'm blind missed it completely
Thx for taking time to help me,
So, if i push vol up and down, i 've a screen, next the screen loading wph 1,2,3,4 Go.
I read on it "This operation will 1.delete all your personal data, and reset all setting to manufacturer default. 2. Calculate CRC checksum. Press Voldown to restore manufacturer default, or press Vol Up to get CRC, or press other keys to cancel".
But,
Nothing happend if i press vol down, or volUp or other buttons :s
Maybe we've to try another way to get into bootloader, i think my poor batterie level is bugging the bootloader.
So, I known that we can't acces bootloader via windows.
I'm on Seven x64, my hd2 is recognyzed as a phone7 Device, with a yellow "!".
If i launch HSPL 4, with administrator right, and XP SP2 compatibility level, it can't acces via USb. " no response".
Any suggestions ? May i change the driver?
right, well that proves the buttons are working, i think its just a case of not having them held in at the right time
pop the battery out, hold down the vol down button on its own and keep it held down, put the battery back in and if it doesnt restart tap the power button.
dont let go of the vol down button
Yep, i've done this maybe 30 or 40 times, no way, no bootloader.
I4ve found a thread that explain to fullu charge the battery, remove it and wait 24H before, do the operation ( vol down, putt battery still vol down, push power stil vol down) No way, this doesn't work :s
So i've order a new battery, maybe it'll resolve the problem, i hope. See when it arrive.
Oh dear, well if you definitely cant get in to bootloader and the keys do work then that's a problem, I doubt a battery will fix it but id be interested in knowing if it does work, good luck! Is been reading quite a bit about fixing devices via the wee metal points inside devices, I wonder I the points inside the hd2 will allow this...
Sent from my HD2 using XDA Windows Phone 7 App
I'm not sure i've understand all your reply Dazza, are u suggesting to check the 3 pin connector baterry on my HD2 ?
If it's this, i've already check this, the 3 pin are good, and i've put a graphyte electrical dust on it to improve the contact.
Nope, I mean if you pop the battery cover off there are 3 metal connectors next to the sim card, it seems on some devices people have found similar points and managed to connect the device to a serial port on a pc, then had direct access to the device bypassing the bootloader. I don't think anyone done this for the hd2 yet but apparently this will fix a completely bricked device
Sent from my HD2 using XDA Windows Phone 7 App
Ok ! Maybe if the new battery won't resolve, i'll try something like that
Its complicated an as far as i know its not been done for the hd2, im not even sure that's the correct points but its a possibility. There are another 2 points on the opersite side to the volume buttons under the battery cover.
Sent from my HD2 using XDA Windows Phone 7 App
my imagio died, it turns on it shows the HTC logo and then just vibrates without stoping.
i downloaded the ROM for it and trying to flash it from the memory card...
Flashing device using Storage Card
Make sure your microSD is Formatted to fat32.
You don't have to delete all the files, but it's safer if you do.
Download your preferred Rom from the Imagio ROM Development Forum.
You may need to Un- zip / rar the file if the chef compressed it.
Make sure, your devices battery status is NOT LESS than 50%.
Go to the ROM's Folder and rename the .nbh file to WHITIMG.nbh
This may have already been done for you.
Copy the WHITIMG.nbh file to the root of your MicroSD Card
Insert MicroSD Card into the phone
Enter the phone's bootloader. Instructions:
Power down the phone.
While holding down the VOLUME DOWN button, Power the phone back on.
Continue holding the VOLUME DOWN button until the TRI-Colored screen shows up. At that time, release the button
Follow the On Screen instructions to start the update
Press the power button to flash the ROM to the device.
After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
i put it in boot mode it starts flashing and its stuck on - loading... for a while, like an hour. is that normal, how long does it take to flash it or am i doing something wrong.
tnx