help me pleas - Vibrant General

Hi, I need your help, I have a samsung vibrant and install CyanogenMod 7, but I regresaral state when it had 2.2 or eclair with froyo and then update it, but I did not endorsement of anything, wanted to know if you could help as I am new about that. I'm from panama hope you can help me ... thanks

I'm not 100% sure what you are trying to say, but I think you are trying to revert from CM7. You need to Odin back to JFD. Here is a link with everything you will need. It will take you back to Eclair 2.1.
Just install the drivers and download the Odin goodies then follow the steps.
http://forum.xda-developers.com/showthread.php?t=876777

Agreed ODIN is the way to go if you want to revert back. Good luck!

sammy should just give an odin disk when a gs is purchased with a manual how to flash back to stock hahahah

Related

[Q] Hi, Cu rious case of Galaxy s

Small run down of what i did and if anyone can help ....
I was running 2.3.3 and updated to the unofficial 2.3.4 using odin and simply honey 5.0 revenge by sgt. That's when i noticed that the phone does not connect to the bell network.The rest of my phone works perfectly even the wifi...but like i said i can t seem to connect to the net work anymore.....
firmware 2.3.4 / baseband version i9000xxjvr/ kernel version 2.6.35.7 [email protected]/ build number simply honey 5.0 revenge
i ve tried some stuff that i have read in these forums like
1. Put apn info my self....tried that nothing.
2. Called tech support and they told me to take the battery out and then the sim
put it back , nothing again
My question is do i have to go back to stock rom to get the network back or is there something else i can try....
information on this subject is sketchy, when i do a google search ...any help would be appreciated...thanks in advance
It probably was a bad flash sounds like some of your system files did'nt compile correctly. Odin back to stockand reflash. I always have flash problems when going past 2.2.1 almost always have to odin back thats why I stick with Froyo a bit mre stable when hopping roms.
strtkempo said:
It probably was a bad flash sounds like some of your system files did'nt compile correctly. Odin back to stockand reflash. I always have flash problems when going past 2.2.1 almost always have to odin back thats why I stick with Froyo a bit mre stable when hopping roms.
Click to expand...
Click to collapse
Couple of questions for you guys out there.......
First my info I am running firmware version 2.3.4 / basband i9000xxjvr/kernel 2.6.35.7 and build number simpley honey 5.0 revenge ...ntw ..my csc i9000 oxajvq
1. Can i go straight to stock using odin from this configuration with out bricking my phone?
2. Can i just flash the csc for bell because someone in the forums told me that is not the right csc for canada, quebec.
please advise....thanks in advance....

Flashed with Overcome need to go back to a Stock release

Hi!
I flashed my P1000 Tab to Firmware 2.3.3 from Overcome before I sold it to a friend. He now wants to resell it on so I want to reflash it back to a standard Samsung ROM so they in turn can do updates in Kies etc.
What is the easiest way to do it - go back to a factory ROM?
I have had a look on Overcome and they say to go to the samfirmware site but I'm not sure which one I want as I seem to be going around in circles.
The tablet is in Australia so it would need to be a ROM for Australia.
Can someone point me in the right direction of what I need to do and where I get the ROM I need etc?
Thanks
esugrue said:
Hi!
I flashed my P1000 Tab to Firmware 2.3.3 from Overcome before I sold it to a friend. He now wants to resell it on so I want to reflash it back to a standard Samsung ROM so they in turn can do updates in Kies etc.
What is the easiest way to do it - go back to a factory ROM?
I have had a look on Overcome and they say to go to the samfirmware site but I'm not sure which one I want as I seem to be going around in circles.
The tablet is in Australia so it would need to be a ROM for Australia.
Can someone point me in the right direction of what I need to do and where I get the ROM I need etc?
Thanks
Click to expand...
Click to collapse
Not sure where you'd find one but there were Roto backups of the Telstra ROM floating around somewhere. I don't think theres any ROM dumps for Optus (I've been looking for one for ages) anywhere, but you might be able to try using one of the stock Euro ROMs and see what Kies will do with that.
Remember, however that neither Telstra nor Optus ever released a Gingerbread update and are unlikely to at this point, so Kies probably won't be all that useful.
Hi
So I downloaded this files called P1000NUBJP7_UUBJP7_UBJP3, but now dunno what to do.
Do I install it via Odin somehow, the file above contains a PIT file and also a .rfs file which I guess is the firmware as it is 250Mb.
When I try and add the item for CSC and PDA in Odin there are none in that archive!
Thanks
Ernie

So I wanna Root my phone, i need help!

I currently have a Samsung Galaxy S GT i9000M Model and I wanna root it so I can have the newest firmware and cool features etc...
I have Odin installed and I know how to make my phone is detected in ODIN via USB (in download mode)
Before going any further and destroying my phone I wanna know some step by step for rooting my phone.
Like , I know nothing of the process... Could someone provide some good recent tutorial with the newest (not Beta) firmware I can get ?
My phone is currently 100% Stock.
Let me know If you have any advices, or good links to provide me...
N/B. Obviously I did some researchs... All I found so far are tutorials that says like : Your phone must be already running X.XX version (which are not supported on the s1) and be Rooted. Nothing really helpful for my stock galaxy.
Thx in advance
cyboirette said:
I currently have a Samsung Galaxy S GT i9000M Model and I wanna root it so I can have the newest firmware and cool features etc...
I have Odin installed and I know how to make my phone is detected in ODIN via USB (in download mode)
Before going any further and destroying my phone I wanna know some step by step for rooting my phone.
Like , I know nothing of the process... Could someone provide some good recent tutorial with the newest (not Beta) firmware I can get ?
My phone is currently 100% Stock.
Let me know If you have any advices, or good links to provide me...
N/B. Obviously I did some researchs... All I found so far are tutorials that says like : Your phone must be already running X.XX version (which are not supported on the s1) and be Rooted. Nothing really helpful for my stock galaxy.
Thx in advance
Click to expand...
Click to collapse
if you are a new member read the stickies first, that's how forums work
http://forum.xda-developers.com/showthread.php?t=1379853
[HOWTO] [REF] [FAQ] [Guides] [Tutorials] Flash/Root/ADB/ROM [MUST READ!]
http://forum.xda-developers.com/showthread.php?t=723596
Yeah for rooting I think its best to leave someone alone for that, if you can't figure out how to root the phone then you should prob not be messing with it in the first place.
Just read the sticky notes and they are pretty easy to explain how to do it.
http://forum.xda-developers.com/showthread.php?t=788108
yes,good luck.
cyboirette said:
I currently have a Samsung Galaxy S GT i9000M Model and I wanna root it so I can have the newest firmware and cool features etc...
I have Odin installed and I know how to make my phone is detected in ODIN via USB (in download mode)
Before going any further and destroying my phone I wanna know some step by step for rooting my phone.
Like , I know nothing of the process... Could someone provide some good recent tutorial with the newest (not Beta) firmware I can get ?
My phone is currently 100% Stock.
Let me know If you have any advices, or good links to provide me...
N/B. Obviously I did some researchs... All I found so far are tutorials that says like : Your phone must be already running X.XX version (which are not supported on the s1) and be Rooted. Nothing really helpful for my stock galaxy.
Thx in advance
Click to expand...
Click to collapse
I have a M version and i can tell you, it doesnt matter. All canadian models of phones are VERY close to international, so you can use all their guides.
So to root:
1. Download either devil kernel or semaphore .tar file from respective threads. Flash them under PDA in odin, no re-partition. Leave everything else.
2. Your phone will not boot, DONT WORRY. Since recoveries are packaged with the kernel on this phone, all we are after is the custom recovery. We dont need the phone to boot.
3. Download Cyanogenmod 9 nightly/rc2. They are virtually bug free and not beta.
4. Flash it from your custom recovery!
5. Now when you flash cm9, it will change your baseband. You will have horrid signal, so flash back to a KG3 modem. You can find it, there is a big thread. And if the modem says nexus s cm7/9, its okay, it will work.
6. Wipe Data/factory Reset from recovery.
7. Have fun with it

Returning to Stock please help

Hi,
Hope anyone can help, I basically bought a UK i9505 unlocked or unbranded from phones 4 u, I have since rooted and installed a few custom roms\kernels.
I'm basically looking to put everything back to stock, I am currently downloading firmware I9505XXUDMH8_I9505OXXDMHA_BTU, can you tell me if this is the latest and correct firmware?, also I don't really understand what the CSC is?, would I need to modify this and when flashing the firmware will the kernel change to an official stock or do I need to flash that as well.
Finally at present my system is modified, how do I get this back to official and 0?, I do have the triangle away app.
Any help would be greatly appreciated, I want to double check everything as I'm not that confident with the process and mainly the order of the steps in the process.
Thanks
Mav

How to go back to stock AT&T Rom?

Hi everyone, is there a way I can just back to stock ATT Rom? I had it rooted and installed one of the roms, but I just want to go back to stock, say the B170 version than later do the officail upgrade to B180, so what are the steps to do that? And when I mean stock, I mean like I just bought it from the store, no TWRP or whatever, just want the phone to be back to original working condition so that I can give it to my kid to play with. Appreciate any help.
Once you've unlocked the bootloader, you can't do an OTA update. You have to wait for someone here to post a flashable B180 ROM.
Thanks, didn't know that. Is there a way to remove that bootup warning when I start up the phone?
not atm i been trying to look into that but havent had much time busy with real life stuff but i will report back if i make any progress on that

Categories

Resources