Database Users

Updating the Galaxy Tab to the latest firmware !

Hey guys
I'm running the P1000JXJJ1, FroYo JPJJ2 firmware on my Tab, and samfirmware states P1000JVJL1 is the latest one !
so I was advised NOT to use KIES, and ODIN was better !!
My tab is rooted with OCLF set, Just a quick question, Odin will delete all my data and also I believe that I'd have to re-ROOT the device right?
another question is since I didn't have market out of the box, the product sales code has been changed to XSG.
thanks a lot guys in advance
Cheers
Jackie

if u use oclf, undo oclf b4 update firmware, kies or odin works fine for me, i'll only use odin when i screw up with my tab

and will I have to re root the device and also will ODIN delete all my data?

Hi,
searching for something else I accidentily found this thread.
Maybe my experince might be of any interest: got the galaxy tab 3 days ago, installed KIES and instantly got a message to update the firmware to Froyo JK5. I followed the suggestion to save my data which I regret later, because it took very long (had already copied a lot of videos to the internal sd) and couldn´t stop it. To cut it short:
the update was successful and nothing deleted, just everything in place. Also synchronized Outlook contacts, though at 96% it got stuck - waited a few minutes, then broke up and all contacts had been transferred fine.
(don´t know, if firmware is different for other countries...)

Odin will not delete your data if you did not choose to repartition, no need to use pit file to repartition if you are just upgrading fw from the same region..safest is still via KIES

To correct some mis-information from above. Flashing with Odin can delete your data, it depends on what components are included in the image you flash. If you flash an official ROM with Kies you should not loose your data but there is always a risk of an issue occurring during any flash that could lead to data loss. Unless you flash a pre-rooted custom ROM you will loose root and SU during a flash. These can be re-applied easily to the SGT using the Super One-Click method.
Redardless of what flashing method you use, if you use RyanZA's OCLF you must undo the lag fix before you flash, otherwise you will certainly loose data and possibly end up with a corrupt system that won't boot (I had first hand experience of this early on in my flashing days with my SGS!). You shouldn't really need to apply a lagfix to the SGT as it doesn't seem to suffer from the same lag as the SGS.
Finally, flashing with Odin can lead to product code being changed, especially if the ROM you flash isn't intended for the normal product code of your device. There are various ways to restore your poduct code, look in the Samsung Galaxy S forums for suggestions on how to do this as the basic construction of the ROMs is very similar between the two devices from that point of view. Also, be aware that people with SGS devices have reported loosing their IMEI while flashing with Odin. If this happens you will end up with a WiFi only device unless you backed up your /efs folder before you flashed. There's lots of info in the SGS forums about this and it's worth a read if you are new to flashing. I haven't heard of anyone with a SGT loosing their IMEI yet but it's worth taking precautions.
Happy flashing folks!!

thanks a bunch guys, I'm now running the latest version !!
was just trying to install the latest gingerbread theme from the forums !! will let you all know how that went

hi guyz,..
im from malaysia and currently using galaxy S and galaxy sl for my wife (not tabs) but i've been request by my brother who owned the galaxy tabs to upgrade it since i had some knowledge..
currently his tabs running on 2.2 stock asia version.and i wanted to flash the latest version 2.3.3 europe edition since i saw many custom rom on it..i've download the latest firmware that is P1000DXJPE ## via samfirmware.com and could not find any pit,csc and modem file..
my question,
1. am i missing something here?
2. is it possible to flash without pit,csc and modem?
3. i know how to flash the file using pda since i've done it with my SGSL but before that i need to flash another old version firmware to used it.is it the same with galaxy tabs?

azamnecrone said:
hi guyz,..
im from malaysia and currently using galaxy S and galaxy sl for my wife (not tabs) but i've been request by my brother who owned the galaxy tabs to upgrade it since i had some knowledge..
currently his tabs running on 2.2 stock asia version.and i wanted to flash the latest version 2.3.3 europe edition since i saw many custom rom on it..i've download the latest firmware that is P1000DXJPE ## via samfirmware.com and could not find any pit,csc and modem file..
my question,
1. am i missing something here?
2. is it possible to flash without pit,csc and modem?
3. i know how to flash the file using pda since i've done it with my SGSL but before that i need to flash another old version firmware to used it.is it the same with galaxy tabs?
Click to expand...
Click to collapse
Go to the Android Development section.
Look up Overcome and BOCA for the Galaxy Tab. Both a great however I prefer BOCA. The current release is 2.3.4 but 2.3.7 is in the works.
If you follow the instructions for BOCA you will have a GTab that feels like it was newly born again.

boxhead72 said:
Go to the Android Development section.
Look up Overcome and BOCA for the Galaxy Tab. Both a great however I prefer BOCA. The current release is 2.3.4 but 2.3.7 is in the works.
If you follow the instructions for BOCA you will have a GTab that feels like it was newly born again.
Click to expand...
Click to collapse
thanks dude!
so i dont need to flash stock gingerbread 2.3.3 to used this custom rom?a bit confuse here...

boxhead72 said:
Go to the Android Development section.
Look up Overcome and BOCA for the Galaxy Tab. Both a great however I prefer BOCA. The current release is 2.3.4 but 2.3.7 is in the works.
If you follow the instructions for BOCA you will have a GTab that feels like it was newly born again.
Click to expand...
Click to collapse
Yes. Follow the instructions on the magrathea site or overcome
Use overcome instructions to instal stock GB 5. It tells you the pit and modem to use for your tab.
Then install the overcome kernel and reboot. It will root the tab and format the storage.
Then you install the Boca zip over the overcome kernel.
If you just want overcomes Rom follow their instructions. They make it simple
Sent from my GT-P1000 using XDA App

is that all??hmm,
will try donload all the files 1st,then i will try
thanks guyz for da info..
so i dont need to flash stock rom like i always do with my SGS before installing any custom rom?

A few basic questions I am still confused about

Hi,
I am tasked with making a Friends Galaxy Apollo ( I5801) usable.
She bought it in Thailand and it is SIMlocked and currently running Eclair (2.1)
1) I first want to SIM Unlock it. I have seen multiple methods for this
This thread has a discussion :
http://forum.xda-developers.com/showthread.php?t=1339705
I will take a look at the youtube video first, but I am concerned that I will lose my IMEI. This seems to happen a lot. How do I back it up? I have seen instructions to backup the /efs folder and others that include a DD command. Which is the most reliable?
2) What is the easiest rooting method? Does SuperOneClick work? Do I even need to root to unlock only?
3) How do I then install a working 2.2? Is there such a thing as an Official 2.2 for the I5801? Otherwise, what is the best way to STABILITY?
4) Other Samsung phones offer packages ODIN or Heimdall ROMs that are pre-rooted in order to do a one operation (sometimes one-click) root/upgrade operation. Is there such a thing for the Apollo?
Thanks.
I tried running a search, and waaay too much confusing crap came back. I have owned several HTC, Mot and Samsung phones and am usually pretty good with this stuff...but I am just plain confused about this phone.
Any help would be appreciated
Caz

2) What is the easiest rooting method? Does SuperOneClick work?
Click to expand...
Click to collapse
SuperOneClick is the works fine for me
For 3) www.sammobile.com/showthread.php?t=12 Scroll down to asuan firmware. Im using dxjpc as it is the latet 2.2 version for asian countries such as Singapore, Malaysia etc other than India. Flash usin odin but do not flash the bootloader as there would be a possibility of a hardbrick.
Sent from my GT-I5801 using XDA App

Caz666 said:
Hi,
I am tasked with making a Friends Galaxy Apollo ( I5801) usable.
She bought it in Thailand and it is SIMlocked and currently running Eclair (2.1)
1) I first want to SIM Unlock it. I have seen multiple methods for this
This thread has a discussion :
http://forum.xda-developers.com/showthread.php?t=1339705
I will take a look at the youtube video first, but I am concerned that I will lose my IMEI. This seems to happen a lot. How do I back it up? I have seen instructions to backup the /efs folder and others that include a DD command. Which is the most reliable?
2) What is the easiest rooting method? Does SuperOneClick work? Do I even need to root to unlock only?
3) How do I then install a working 2.2? Is there such a thing as an Official 2.2 for the I5801? Otherwise, what is the best way to STABILITY?
4) Other Samsung phones offer packages ODIN or Heimdall ROMs that are pre-rooted in order to do a one operation (sometimes one-click) root/upgrade operation. Is there such a thing for the Apollo?
Click to expand...
Click to collapse
1.I backup the /efs folder and also manually copy the files for additional safety.
2.if you are on 2.1, z4root works great. get the apk from here, install and root. thats it. you need to root at least to backup the /efs folder.
3.go to samfirmware.com and search i5800. install any of the latest ROMs.
4.Some "stock" ROMs themselves are pre rooted. Dunno how. Install them if you want. (eg. JPM)

Ok...my phone is now rooted and SIMunlocked. Pretty easy once you get over the fear of corrupting your IMEI data.
Now I have another question:
I REALLY want to make sure I don't brick this phone, but I think I want to upgrade it to
2.2...sooooo:
How can I be sure where the phone is from and therefore which firmware to flash?
I *know* the phone was purchased in Thailand, but I can't find the firmware currently on the phone referenced anywhere for the Apollo.
The firmware baseband is DXJG2 and the build number is DXJH2. A quick google search yields only hits for a "Galaxy Beam" ??
Am I asking for trouble flashing this puppy? My friend probably does not care that much about ECLAIR vs. FROYO...I just think that FROYO is a lot more modern.
I am just afraid that I have a freakish phone in my hands and that it won't react in a "nice" way.
Any pointers?

If you do not flash the bootloader it is not possible to hardbrick the phone. Only a softbrick is possible and a reflash will solve the problem. Android firmwares have been shifted to sammobile.com and samfirmware does not provide them anymore if im not wrong. In froyo you will have a bit more space for appilcations and since your friend in from Thailand(in asia) i suggest u flash an asian firmware. Dxjpc is working find for me
Sent from my GT-I5801 using XDA App

u neednt be afraid of bricking the phone. and it is not necessary that u flash only asian frimwares. look around the forum to see which f/w works best for the majority of people and flash it. before flashing, make sure u remove boot and sbl files from the downloaded f/w. then u have 0% chance of hardbricking the phone.
cheers

S5 recovery 20$ min read all please. I'm desperate

- Intro
- Done and searched so far
- My Questions. (Jump to the end unless you think I haven't search prior )
- Bounty
INTRO
Hey guys. I'm french Canadian (please understand my bad written )
and thanks to the phone I choosed (s5 active g870w telus)
I'm becoming pretty much bilingual I've checked all over
around The Web and over this forum. And can't find an accurate
answer . I know I picked the wrong phone for rooting but
as a construction worker it was a good compromise.
DONE AND SEARCHED
My Samsung Galaxy s5 Active g870w from Telus
is still on 4.4.2 since there is no and there will not be
any update for a while.
I managed to used the g900w8 version of
Chain fire auto root method using Odin 3.09
to get roots.
I have also succès to flash Unity 2.0.1 rom.
So far I figured that my version can count as
the Canadian version of the s5 small g900w8. (I may be wrong)
I found a stock Firmware (that accualy make my
lies in russian ) Wich I used a lot lately due to all
my soft brick.
My goal is to be able to upgrade to a nice custom rom
on lollipop. I was hoping Fusion. And as for the recovery
TWRP would be my choice if it was possible.
Now I am stuck trying to install TWRP. I have followed
multiple guide. I have tried to install from TWRP manager
the version 2.8.6.0 klte. I have tried 3 times and after the app
installation I tried to reboot to recovery using Quick boot,
i always end up in Odin mode.
I then tried to install using Odin flashing the same version
Downloaded from TWRP.me site. Then it let me load into
my stock version. Then if I try to reboot in recovery
it still stock.
I even tried to use safestrap both version at&t and Verizon
and both soft bricked me.
I have read or scan about every thread and none talk about
S5 a g870w. Beside the att version Wich are locked.
QUESTIONS
My Questions and I really beg for answers even if
You have only 1 answer.
1- Is my phone g870w compatible g900w8?
2-is it compatible to any other versions?
3-when looking should I only look for Canadian version or I can also
use either g870 from at&t,Verizon or international. Or I look for
International g900. Since I guess my bootloader is unlocked .
4- Since only at&t and Verizon are supposed to be lock I guess
I can't use safestrap... so are TWRP and CWM the only options?
5- Can someone help me troubleshoot my installations. ?
6- After I install my recovery a a g870w on kitkat 4.4.2
Should I be able to flash lollipop base custom rom?
7- Is it possible that there is no option for me beside
Unity and stock rom.
BOUNTY
It might not be much but I offer a 20$ minimum bounty for who ever
take me outta this non ending bulls*"t.
Thanks guys. And please I swear I have search and read a lot
just Google my model number and you'll always end up on me
Searching and I seems to be the only one g870w talking about
recovery or custom rom. All I found is how to root...
Jon

1- Is my phone g870w compatible g900w8?
No, it is different flashing anything that isn't designed for your exact model number ( even the AT&T ones which are one letter different) won't work.
2-is it compatible to any other versions?
No, only firmwares for your exact phone will work without someone modifying something specific for you.
3-when looking should I only look for Canadian version or I can also
use either g870 from at&t,Verizon or international. Or I look for
International g900. Since I guess my bootloader is unlocked .
Flashing any other model number but your own risks bootloop/bricking as they although look similar can have different firmware partitions amongst other things.
4- Since only at&t and Verizon are supposed to be lock I guess
I can't use safestrap... so are TWRP and CWM the only options?
If someone can have a look at TWRP is possible that they can make a version work for you: ideally I would say with it being so difficult as so few have your model I would go to stock: root and use xposed, and leave the rest.
5- Can someone help me troubleshoot my installations. ?
Sure, happy to help but don't know how much can help when you are trying firmwares for different versions.
6- After I install my recovery a a g870w on kitkat 4.4.2
Should I be able to flash lollipop base custom rom?
Unless someone has made I've for your model type I doubt it.
7- Is it possible that there is no option for me beside
Unity and stock rom.
Yeah unfortunately this is quite likely.

thanks for taking the time.
Now I'll go private with you for personal things.
but before maybe few extra questions will help the very few others in
the same painful situation.
about compatibility you answered no.
What made me search so bad is that I've seen
other members(g870a) claiming they we're using
g900 roms I'll search for a link.
-Does it mean even tho its risky or
it means that American version have more luck ?
-am I still able to use a recovery like safestrap?
-can I hang myself?
- and if I'd like to have TWRP and a know custom rom
would it be a lot of works for Des.
Is it "askable" are some working for money?
I hate stuck to death I miss my note 3 like crazy. .. damn

Need Guidance...

Hey guys,
I'm going to install a custom ROM today to see if that maybe fixes my SensorHub not working. I just need guidance on the correct procedure. I have a SM-N900 model (N900XXUEBOL2) running Lollipop 5.0. Do I first need to root, or can I install a custom ROM straight from the stock recovery? It seems like there aren't may ROMS available for the SM-900 model, but I've found one that seems to have good battery life and performance: TR-ROM. This is the procedure I will follow:
1) Root phone with CF-Auto-Root-ha3g-ha3gxx-smn900.zip
2) Use ODIN to flash n900-cwm-recovery-6.0.5.0-kk_L5.0(0812).tar
3) Flash TR-ROM from CWM: TR-ROM XDA
Is this all correct? I just want to make sure that I don't brick my phone!
Also, how can I revert back to stock if I need to?
Thanks so much!!!

Guit4eva said:
Hey guys,
procedure. I have a SM-N900 model (N900XXUEBOL2) running Lollipop 5.0. can I install a custom ROM straight from the stock recovery?
NO
Click to expand...
Click to collapse

OK. ..so are the 3 steps I mentioned above correct?

http://forum.xda-developers.com/galaxy-note-3/general/guide-root-note-3-sm-n900-5-0-install-t3069670

I'm trying to follow that guide, but the build number of N900 on the CF-Root site says:
LRX21V.N900XXUEBOA6
Whereas mine is:
N900XXUEBOL2
Will is still work? Also, it says a locked bootloader will probably brick your device. How do I check if mine is locked?
I've rooted and installed custom roms on many devices before - I'm not sure why rooting and installing custom rom on the Note 3 is so daunting...

Google?
Sent from my Note 3 running Purify CM13

Dejan Sathanas said:
Google?
Sent from my Note 3 running Purify CM13
Click to expand...
Click to collapse
I wouldn't be asking here if I hadn't already Google'd extensively.

But of course... The phone is brand new, so there's no info yet available. I understand...
Yes, do as you wrote in the first post. Should be ok, as those are the latest files.
Sent from my Note 3 running Purify CM13

I'm finding that there is actually TOO much information (too many variables). That's why I'm asking specifically about my version, as I can't seem to get my head around it - and rather than brick my phone, I'm merely seeking a bit of guidance from someone more experienced than me. In the past, when I was rooting previous phones, I received a lot of useful information and help from XDA - but it seems like now all I'm getting are sarcastic remarks and general unfriendliness. Why is that?

You have N900 its an exynos model not the qualcom .Not something that has a big following on here .
The links in your post point to zips , whats the point of me downloading a zip ??
CF autoroot you need to read the instructions regarding builds .
Locked boot loader no idea for that model .
CWM yes flash via Odin if its the correct one for your model .
Flash rom yes the rom will give you the method .

I'm scaring to brick my phone. So how to backup all things ?

Hello friends,
I would like to install custom rom on my phone Note 4 sm-n910C . I'm not an experienced person for it. But basicly I know that I need to root my phone 1st then install suitable version of TWRP on my phone. And then I can backup my stock rom and all things. Then install custom rom file.
But I scare to brick my phone doing this procedure. So I wonder, can i backup my phone's stock rom and other all things (kernel, firmware, modem etc...) without TWRP ? I mean , can do it with pc software ?
And if my phone become brick, thus, can i restore it completely via pc then ?
If i can do that, how ?
I'll be appreciate if you help me ?

Choose your Country and phone provider and download the stock ROM from Sammobile
If it's needed then use Odin to reload it. There's plenty of guides how to use it including those that explain how to root. I recently rooted one of my Note 4s, a N910C and apart from using a slightly older version of TWRP was pretty straightforward.
I used this guide and the downloaded the files from the links in it but there's other's available but be 100% sure you're following the guide for a N910C.
I'm not that knowledgeable about Rooting compared to many people on here although I've rooted all my Tablets and Phones but seem to recall you may need to use an older version of Odin to do so. The most difficult problem I had was getting the correct driver installed that would recognise all my devices and even that was just persistence. Just read everything a few times and double check you have the correct files before you start, it's pretty straightforward.
In all the above comments I'm assuming you're using the last version of the stock ROM that was released.

@Big Elf
Thank you very much for your reply and explanation. I looked at your shared pages. And I'd like to start it.
But I have some quesitons to not make a mistake. If you guide me, I will be appreciate.
But before that let me share my phone feautres screen shots. You may see all detailed information.
SCREENSHOTS
I can't share links due to xda rules bcos I need to reach 10 post. So pls complete http section if it need for below scrshoot links.
1- drive.google.com/open?id=0B6aBME5e-tzcYk1zY0dqeTZaMVk4eEdWbjN4SWVPSEU3cXFr
2- drive.google.com/open?id=0B6aBME5e-tzccHF6UFpCT29JT1ozRUFoMUtmWmZ0V0J3c19z
3- drive.google.com/open?id=0B6aBME5e-tzcajVnMGkyMTRJdmo3OTNPc29SQXlEbkY0R3N3
And My Questions
1- First of all ty for rooting page. According to explanation i'm going to root my phone. But I wonder that android version is matter or not. My phone version is 6.0.1 as you see. Is it okay, its suitable for my phone, right ?
2- As far as I read on internet, There are all TWRP versions are different for all diffrent smartphones. According to above scrshoot informations, which is the suitable, stable and latest version for my phone ? And Where can i find it from ? Or if its possible could you forward me exact page and/or link please ?
Because my scared major thing is that. Wrong type of TWRP. And so brick my phone. Btw, let me ask, wrong version lead to brick phone, right ?
If I install the true type (version anyway) of TWRP then I will be relax. Because after that, process will be very easy for me. I experienced from Huawei's first phone "IDEOS X5" . I have installed TWRP and custom roms on it , on years 2012-2013. I only scare to make mistake via perform it on note 4 & brick it.
Thank you so much again.

You've made your first mistake . I explained you need to read everything carefully and double check you have the correct files before starting so that you're reasonably confident that you know what you're doing.
The link I posted explaining how to root also has the link to the version of TWRP and Odin needed to install and Root it but you didn't read it properly.
You're running the same version of the ROM I have on my N910C albeit a different country (which won't make a difference).
If you install the Official TWRP App from Team Win you can update TWRP after rooting. I'd also suggest installing the SuperSu (Pro) App from Codingcode which will update itself after rooting. I also use Root Checker (Pro) from joeykrim to check that root has worked and SuperSu has installed correctly. All those apps are available in the Play Store. I pay for the Pro versions as I appreciate the work that's gone into them and as a thank you to the developers.
You don't have to root it so don't feel that you have to do so.
Although all my phones are rooted my Note 4s (N910Fs and a N910C) still run the stock ROM and the main reasons I did so was to run Adaway and also to debloat neither of which are essential. I also wanted to know how to do it.
Installing another non-Samsung ROM has 4 main disadvantages:
You lose the fine control over the OLED screen including the boost mode in bright sunlight
You lose some of the functionality of the s-pen
You lose a lot of quality from the camera that you won't get back with any ROM.
Most of the ROMs have some faults other than those just mentioned but are usually but not always minor.