- Intro
- Done and searched so far
- My Questions. (Jump to the end unless you think I haven't search prior )
- Bounty
INTRO
Hey guys. I'm french Canadian (please understand my bad written )
and thanks to the phone I choosed (s5 active g870w telus)
I'm becoming pretty much bilingual I've checked all over
around The Web and over this forum. And can't find an accurate
answer . I know I picked the wrong phone for rooting but
as a construction worker it was a good compromise.
DONE AND SEARCHED
My Samsung Galaxy s5 Active g870w from Telus
is still on 4.4.2 since there is no and there will not be
any update for a while.
I managed to used the g900w8 version of
Chain fire auto root method using Odin 3.09
to get roots.
I have also succès to flash Unity 2.0.1 rom.
So far I figured that my version can count as
the Canadian version of the s5 small g900w8. (I may be wrong)
I found a stock Firmware (that accualy make my
lies in russian ) Wich I used a lot lately due to all
my soft brick.
My goal is to be able to upgrade to a nice custom rom
on lollipop. I was hoping Fusion. And as for the recovery
TWRP would be my choice if it was possible.
Now I am stuck trying to install TWRP. I have followed
multiple guide. I have tried to install from TWRP manager
the version 2.8.6.0 klte. I have tried 3 times and after the app
installation I tried to reboot to recovery using Quick boot,
i always end up in Odin mode.
I then tried to install using Odin flashing the same version
Downloaded from TWRP.me site. Then it let me load into
my stock version. Then if I try to reboot in recovery
it still stock.
I even tried to use safestrap both version at&t and Verizon
and both soft bricked me.
I have read or scan about every thread and none talk about
S5 a g870w. Beside the att version Wich are locked.
QUESTIONS
My Questions and I really beg for answers even if
You have only 1 answer.
1- Is my phone g870w compatible g900w8?
2-is it compatible to any other versions?
3-when looking should I only look for Canadian version or I can also
use either g870 from at&t,Verizon or international. Or I look for
International g900. Since I guess my bootloader is unlocked .
4- Since only at&t and Verizon are supposed to be lock I guess
I can't use safestrap... so are TWRP and CWM the only options?
5- Can someone help me troubleshoot my installations. ?
6- After I install my recovery a a g870w on kitkat 4.4.2
Should I be able to flash lollipop base custom rom?
7- Is it possible that there is no option for me beside
Unity and stock rom.
BOUNTY
It might not be much but I offer a 20$ minimum bounty for who ever
take me outta this non ending bulls*"t.
Thanks guys. And please I swear I have search and read a lot
just Google my model number and you'll always end up on me
Searching and I seems to be the only one g870w talking about
recovery or custom rom. All I found is how to root...
Jon
1- Is my phone g870w compatible g900w8?
No, it is different flashing anything that isn't designed for your exact model number ( even the AT&T ones which are one letter different) won't work.
2-is it compatible to any other versions?
No, only firmwares for your exact phone will work without someone modifying something specific for you.
3-when looking should I only look for Canadian version or I can also
use either g870 from at&t,Verizon or international. Or I look for
International g900. Since I guess my bootloader is unlocked .
Flashing any other model number but your own risks bootloop/bricking as they although look similar can have different firmware partitions amongst other things.
4- Since only at&t and Verizon are supposed to be lock I guess
I can't use safestrap... so are TWRP and CWM the only options?
If someone can have a look at TWRP is possible that they can make a version work for you: ideally I would say with it being so difficult as so few have your model I would go to stock: root and use xposed, and leave the rest.
5- Can someone help me troubleshoot my installations. ?
Sure, happy to help but don't know how much can help when you are trying firmwares for different versions.
6- After I install my recovery a a g870w on kitkat 4.4.2
Should I be able to flash lollipop base custom rom?
Unless someone has made I've for your model type I doubt it.
7- Is it possible that there is no option for me beside
Unity and stock rom.
Yeah unfortunately this is quite likely.
thanks for taking the time.
Now I'll go private with you for personal things.
but before maybe few extra questions will help the very few others in
the same painful situation.
about compatibility you answered no.
What made me search so bad is that I've seen
other members(g870a) claiming they we're using
g900 roms I'll search for a link.
-Does it mean even tho its risky or
it means that American version have more luck ?
-am I still able to use a recovery like safestrap?
-can I hang myself?
- and if I'd like to have TWRP and a know custom rom
would it be a lot of works for Des.
Is it "askable" are some working for money?
I hate stuck to death I miss my note 3 like crazy. .. damn
[Q&A] [ROOT GUIDE] KNOX 0x0 NOTE 3 LTE (SM-N9005) LOLLIPOP DB 5.0 KNOX 0x0 [ROOT GUI
Q&A for [ROOT GUIDE] KNOX 0x0 NOTE 3 LTE (SM-N9005) LOLLIPOP DB 5.0 KNOX 0x0 [ROOT GUIDE]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROOT GUIDE] KNOX 0x0 NOTE 3 LTE (SM-N9005) LOLLIPOP DB 5.0 KNOX 0x0 [ROOT GUIDE]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Is it possible to use this method on a Verizon Note 3 SM-N00V? Both models have the same processor and capabilities, but I'm not sure if the locked bootloader on my N00V would cause problems.
aestheticandroid said:
Is it possible to use this method on a Verizon Note 3 SM-N00V? Both models have the same processor and capabilities, but I'm not sure if the locked bootloader on my N00V would cause problems.
Click to expand...
Click to collapse
Well yes but I haven't tested it.
The root part I can guarantee will work but I will need to update the guide for other variant with the necessary kernels which I'm currently doing but the rom flashing, I cannot guarantee will work but I can make it for all those who are
Also please note that, the Dev base rom has additional modifications done for extended battery life. The Rom that I would provide would be 100% stock. (I'm saying this because the original stock firmware needs huge battery improvements).
I will update the thread with root kernel and stock kernels for N900V ASAP.
XxXKINGMAKXxX said:
Well yes but I haven't tested it.
The root part I can guarantee will work but I will need to update the guide for other variant with the necessary kernels which I'm currently doing but the rom flashing, I cannot guarantee will work but I can make it for all those who are
Also please note that, the Dev base rom has additional modifications done for extended battery life. The Rom that I would provide would be 100% stock. (I'm saying this because the original stock firmware needs huge battery improvements).
I will update the thread with root kernel and stock kernels for N900V ASAP.
Click to expand...
Click to collapse
Awesome! I'm completely find with a stock ROM, I just miss root capabilities so much!
So I need to wait for a different .zip kernel file that was made for the N900V and I shouldn't use the N9005_ROOT_Kernel.zip file you have linked up right now? Other than that, the only other file needed is the stock kernel for the N900V on 4.4.2, right?
aestheticandroid said:
Awesome! I'm completely find with a stock ROM, I just miss root capabilities so much!
So I need to wait for a different .zip kernel file that was made for the N900V and I shouldn't use the N9005_ROOT_Kernel.zip file you have linked up right now? Other than that, the only other file needed is the stock kernel for the N900V on 4.4.2, right?
Click to expand...
Click to collapse
Yes you shouldn't use the N9005_ROOT_Kernel.zip which I have provided since its only for N9005 model.
Unfortunately since I'm not aware of your model and the method provided requires a ROOT_Kernel for your variant, which I'm still trying to find.
Sincerely,
KINGMAK
replaced both a stock Note 3 4.4 and a stock Note 3 5.0 - no issues
have successfully replaced both a stock note 3 4.4 and a stock note 3 5.0 [both new] with this root without tripping knox method
both are working smooth and have no issues, have installed various apk's requiring root/superuser access and all are working 100% as should
did it for a bit of fun, while STILL waiting for the EE Note 3 & EE Note 4 official firmware's that were promised months ago [just in case your reading XDA Mr EE!]
so to clarify the steps, all worked, no crashes, knox still showing 0x0
cheers for all your work and testing King and thanks to all that contributed with various bits n bobs to allow you to do it!
I've just broken my Knox 0x0 rooted Lollipop ROM. I was trying to disable the startup and shutdown sounds and renamed 2 files in the /system/media folder. They were called samsungboot and samsungshutdown or something, I cannot remember the file extensions. Can some kind person please upload them so I can try to replace them via adb without tripping Knox? Or is there another way? Thanks.
EDIT - never mind, I just went for a reinstall
just to clarify. will this method work if i have unrooted stock 5.0? and installing 4.4 wont trip knox?
That's correct
Will this work on galaxy N900t
Im new here and would greatly appreciate a step by step guide to root a galaxy N900t using tmobile and lollipop. Thanx. Rob
Kernel version=pda?
hello in the Rooting instruction "Before starting this find your kernel version and build number, the last 3 letters/digits matter such as NG1 or NH1, etc"
kernel version=pda?
THANKS.
Q: Note 3 [Apps can't save/SD card not recognized]
Hello XDA
It's my first time to post here and my first attempt in flashing a phone. I have a Note 3 SM-N9005 on Kitkat which I upgraded and rooted following the guide by XxXKINGMAKXxX. I followed to guide to the letter and have successfully gained a rooted Android 5.0 without any apparent problems. I used the stock ROM by XxXKINGMAKXxX and NOT the Alexander dev base.
After a day of using though, I started noticing that some of my apps can't seem to save or recognize my SD card. Here's a short list of some app errors that I encounter:
1. Google Earth ("An SD card is required to run this application")
2. Facebook Messenger (Unable to save image)
3. Chrome ("Do you want to replace the existing FILE in your Documents directory?" followed by saving error)
4. Snapseed (saves file but cant be located anywhere)
5. Autodesk Sketchbook (same as Snapseed)
I have tried factory reset and have reformatted my perfectly functioning external SD but the problem came back again. I have GSam battery monitor and Cerberus app installed as a system app and I use Link2SD to freeze some apps that are deemed safe by others. I use Tasker but very basic profiles only and also have Greenify but I greenify most app that I installed via Playstore only.
PLEASE HELP. I don't know what to do with this phone anymore. Anyone here who have encountered the same problem?
Link to the guide I used: http://forum.xda-developers.com/galaxy-note-3/development/root-guide-note-3-lte-sm-n9005-lollipop-t3093183)
I flashed the rooted Polish ROM 3 times and had exactly the same problem each time. I moved over to the Alexendr Devbase rom and have had no such problems.
Sent from my LG-V500 using Tapatalk
dwl99 said:
I flashed the rooted Polish ROM 3 times and had exactly the same problem each time. I moved over to the Alexendr Devbase rom and have had no such problems.
Click to expand...
Click to collapse
So the problem is in the stock ROM? Well now that is sad. I wanted my ROM to be as close to stock as possible but with root access
Anyway, If I were to flash the Alexendr Devbase rom, where in the steps should I start? Do I need to downgrade again to Kitkat (part1 or part2?) or I will start with the flashing of Mobile Odin (part 3)? Im sorry but im really really new to these.
Thank you for the quick reply.
You need to downgrade to Kitkat, start at the beginning. The Devbase rom is pretty much stock with the option to debloat.
Sent from my LG-V500 using Tapatalk
dwl99 said:
You need to downgrade to Kitkat, start at the beginning. The Devbase rom is pretty much stock with the option to debloat.
Click to expand...
Click to collapse
Can I downgrade to Kitkat and begin step 1 just by flashing the Sammobile ROM? I believe the bootloader (OB6) and the CP file has already been flashed in the process, wouldn't that be a problem i.e. create bootlop/brick ? Have you tried it yourself?
Thank you again.
jiraiyamandaraya said:
Can I downgrade to Kitkat and begin step 1 just by flashing the Sammobile ROM? I believe the bootloader (OB6) and the CP file has already been flashed in the process, wouldn't that be a problem i.e. create bootlop/brick ? Have you tried it yourself?
Thank you again.
Click to expand...
Click to collapse
Just follow the guide from the beginning, the BL & CP will be over-written when you flash the stock KK ROM with PC Odin.
Fix Possible
For all those that have had issues regarding the SDCard and Permissions. All you need to do is after you have flashed the rom. Clear your Cache, Data and then Fix SD card permissions.
All of these options are present within the Recovery mode of NOTE 3. Hope fully this will fix the problem. Fortunately, I have not faced any such problems. I have retired from this project as I have previously mentioned that I no long have a Note 3 with Knox 0x0. I have moved over to Sony Xperia series and working with other developers to make mods for it.
Sincerely,
KINGMAK
---------- Post added at 08:14 AM ---------- Previous post was at 08:14 AM ----------
Yes usually the last 3 digits or letters are the PDA version.
dwl99 said:
I flashed the rooted Polish ROM 3 times and had exactly the same problem each time. I moved over to the Alexendr Devbase rom and have had no such problems.
Click to expand...
Click to collapse
XxXKINGMAKXxX said:
For all those that have had issues regarding the SDCard and Permissions. All you need to do is after you have flashed the rom. Clear your Cache, Data and then Fix SD card permissions.
Click to expand...
Click to collapse
I figured out what's causing the bug on the stock Polish ROM. It seems that wiping the cache partition in recovery causes the app permission to be messed up. I've tried reflashing twice and a couple of factory reset; I get the same result after going to recovery and wiping cache. Fixing SD Permission is not available in my recovery menu. I've switched to Alexndr DevBase OEA and so far so good. Thank you guys for helping out. Great great guide.
Hey , you can do this manual by Version deodex of " devbaseAlexander ?
For root knox00 in 5.0
Thanks.
Enviado desde mi SM-N9005 usando Tapatalk 2
Hi all, this is my first ever post so please bear with me!
I have a Note 4 sm-910f. I rooted recently and have the latest TWRP installed. I have tried to install a number of ROMs but:
If I install AOSP based I get a "Failed" error and a note to say that the ROM is not the correct one for the device - it seems to get my device wrong too?!
If I install a Touchwiz ROM such as NoteX it appears to flash OK but it just keeps bootlooping upon restart.
Any ideas? Could it be anything to do with the modem or bootloader? I'm currently on stock 5.0.1.
Any help greatly appreciated!
Cheers
Bugsie
bugsie857 said:
Hi all, this is my first ever post so please bear with me!
I have a Note 4 sm-910f. I rooted recently and have the latest TWRP installed. I have tried to install a number of ROMs but:
If I install AOSP based I get a "Failed" error and a note to say that the ROM is not the correct one for the device - it seems to get my device wrong too?!
If I install a Touchwiz ROM such as NoteX it appears to flash OK but it just keeps bootlooping upon restart.
Any ideas? Could it be anything to do with the modem or bootloader? I'm currently on stock 5.0.1.
Any help greatly appreciated!
Cheers
Bugsie
Click to expand...
Click to collapse
which rom is Note x for 910F ??
or you meant Xnote ??
if yes Xnote then it will give you bootloop as thats based on kitkat and your on lollipop
try some roms based on lollipop
Er. Aditya said:
which rom is Note x for 910F ??
or you meant Xnote ??
if yes Xnote then it will give you bootloop as thats based on kitkat and your on lollipop
try some roms based on lollipop
Click to expand...
Click to collapse
Hi, thanks for the quick response.
I did mean X-note. I have tried a number of other ROMs too, Aliance - Emotion Revolution.
Right now I tried flashing a new bootloader/modem as per this ROM "http://forum.xda-developers.com/note-4/snapdragon-dev/rom-robomix-t3069298" but now I'm stuck in a complete bootloop!!
I think I need to get the correct bootloader and/or modem - I just don't have a clue why or what is what. I an't find any guides!
bugsie857 said:
Hi, thanks for the quick response.
I did mean X-note. I have tried a number of other ROMs too, Aliance - Emotion Revolution.
Right now I tried flashing a new bootloader/modem as per this ROM "http://forum.xda-developers.com/note-4/snapdragon-dev/rom-robomix-t3069298" but now I'm stuck in a complete bootloop!!
I think I need to get the correct bootloader and/or modem - I just don't have a clue why or what is what. I an't find any guides!
Click to expand...
Click to collapse
you took the booloader from the rom op and flash it ? either first or later flashing the rom zip ?
Hay there! I just installed Costom Rom on my Galaxy S5 G900I after a great stuggle at one stage i thought I bricked my phone, but lucky this time. All thing is fine even great with custom rom the issue it that, It change my device information and it is Note 5 Now here is my questions?
1) How to know my Build No ( orginal one before custom rom)
2) If I want to installed another Rom then how to find my phone match's Rom?
Thanks and Sorry, If i wasn't clear enough.
Jabbarshah said:
1) How to know my Build No ( orginal one before custom rom)
Click to expand...
Click to collapse
Hi Jabbarshah
If you followed xda tutorials by the letter, you have made a complete Nandroid backup before starting any modifications.
Just in case the information you eagerly need isn't present, you may restore that backup and regain access to it.
What lasted after ROM installation can be easily visualized using Phone INFO ★Samsung★. Specially Hardware and Personal tabs are stock information.
Jabbarshah said:
2) If I want to installed another Rom then how to find my phone match's Rom?
Click to expand...
Click to collapse
Your main information while seeking for a new ROM is the model SM-G900I. Nothing else matters.
You will just need to take care, for future flashes, that your bootloader and modem are matching (closer enough) the firmware you are flashing.
Example:
a) If you intend to flash PopWiz Telstra v5.1 that is compatible with your G900I, would be kinda complex as @iris28 doesn't clearly states which firmware version he's using. The information may be somewhere onto his thread but unfortunately isn't advertised as should.
b) THE GALAXY PROJECT by Master @djb77 states clearly that he's using Lollipop XXS1BPD3. :victory: ... so you end opting for it.
Now you just have to search for the closer firmware you can find that will match (not exactly) TGP. You have a complete list at Sammobile SM-G900I. Seek for your country/provider with higher Lollipop (5.0) release. If you are unable to find a flashable Odin file for that, you may do it yourself (xda way)
Hope I could be clear enough.
Have fun.
.
Hey guys ..
I need a real help here.. since I'd neither rooted a phone nor installed a custom ROM before.. Its also my first thread here in xda :laugh:
and I'm now about to do so with a used "Note 3 N9005" which I've bought recently.. now I want to install the "Phronseis latest Note 5 Marshmallow ROM port"
knowing that this device condition now is "Official and not rooted" with the latest official Lollipop 5.0 from Samsung via OTA update.. and the Knox is tripped showing "0x1 (4)" in the bootloader..
My problem now is that when I've read the step by step guide of the installation process I found myself lost because of some terms that I have no idea about which made me afraid of messing the things up or bricking the phone :crying:.. for example they talked about the "kernel" and I don't know if I could just ignore this part and go through the steps resulting in installing that ROM with the stock kernel??
and all that brings other questions to my mind :
1-what exactly should I do to get this phone from this official state to the desired one?
2-what about the battery life and screen on time? will it be affected by that ROM or the kernel that going to be used with it??
3-will I be able to go back to official state anytime later by flashing the official Kitkat ROM with Odin for example?
4-will this thing change my IMEI or CSC and if it does will it be irreversible?
Any help is appreciated but please there is no room to give "opinions".. because in my condition I need "facts" :good:..
Thank you in advance
A rom has instructions start by reading them .
You can revert to stock by flashing via Odin.
Facts there are a number of faqs and stickies.
Opinion unless you understand the basics flash nothing.
http://forum.xda-developers.com/galaxy-note-3/general/samsung-galaxy-note-3-sticky-roll-t3237249
Rule 1 backup EFS
Rule 2 read the instructions .
Rule 3 Understand the instructions .
Regarding the rom you want to flash all the details re kernel etc are in the OP page 1.
Sent from my SM-N920C using XDA-Developers mobile app
Root
Install custom recovery
Use custom recovery to backup your current rom.
Install custom rom as per instructions .