Database Users

think got a brick

phone wont charge and when usb in says mounting error any thoughts . should i try a jig

try Odin back to stock....can you get into download mode?

no stuck believe in clockwork recovery w mounting error

So you took the battery out then plugged it into usb held volume up and down put the battery back in and it goes to recovery and not download?
Sent from my GT-I9000 using XDA App

ok....
open odin....
connect USB to PC but not phone....
shutdown phone....
hold both volume keys... then insert usb to the phone...
phone should go into download mode...odin SHOULD connect automatically...
load pit and tar files and go back to stock...

Technowiz said:
phone wont charge and when usb in says mounting error any thoughts . should i try a jig
Click to expand...
Click to collapse
Heres a thought.... Why not learn how to do something simple as getting into download mode and using ODIN. WHY must you post the SAME THREAD 3 TIMES in 3 different sections of the VIBRANT FORUM. You're asking to get the ban hammer.

brian_v3ntura said:
Heres a thought.... Why not learn how to do something simple as getting into download mode and using ODIN. WHY must you post the SAME THREAD 3 TIMES in 3 different sections of the VIBRANT FORUM. You're asking to get the ban hammer.
Click to expand...
Click to collapse
This
Sent from the Bermuda Triangle.

if you read i cant get to download mode stuck on recovery screen everytime i turn on posted that several times too

read this ..... http://forum.xda-developers.com/showthread.php?t=849028
and/or
that... http://forum.xda-developers.com/showthread.php?t=848737
and dont double/triple post the same question in different section sir....its not cool

on the tar file do i leave it as a zip
or extract as well and create a folder?

and do i repartion

CAREFULLY READ the second link in my previous post....the extension of the .tar file should be .tar dont extract ****!!! load the .pit and .tar files!!!! go back to stock!!!!

now odin does not show phone connected but coputer notices the phone wat do i do

got it to download mode but odin doesent see it

unplug it then plug it in again
Nero +dow1.3+oclf

tried it again nothing

Close odin unplug phone open odin plug phone in
Sent from my GT-I9000 using XDA App

Tonicacid said:
Close odin unplug phone open odin plug phone in
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
yeah....and make sure you got the correct drivers and they're installed

odin stuck at cache rfs should this take a while

Just let it run
Sent from my GT-I9000 using XDA App

HOW TO -- Reset Binary Conter to 0

hi @all
follow instruction to reset the binary counter:
before you start, you need a actually gnote rom and you need usb jig!! if you not have a jig, dont try this!!!! im not responsible if you brick your phone!!
1. download a sgs2 bootloader(search in sgs2 forum --> bootloader)
2. flash it over odin as pda
3. put the battery out
4. put the battery in and connect the usb jig
5. connect your phone with pc
6. flash the rom via odin as pda
7. when is done, disconnect the phone from pc and remove the jig
8. put the battery out and again in
9. connect your phone whit the pc over the normal usb connector, flashed rom will start with the update, phone reboot self ---> finish
dont ask me, dont look for support, im not developer, i only wrote down what i do and how i reset the counter to 0..
many thanks at bodivas, hi was the first one who try this, and i can confirm it, it works..

with my jig i can't connect the note to the pc, just the jig. .. how is your jig? a picture or a link to buy it?
thanks

geek78 said:
with my jig i can't connect the note to the pc, just the jig. .. how is your jig? a picture or a link to buy it?
thanks
Click to expand...
Click to collapse
here a link in ebay.. http://www.ebay.co.uk/itm/Samsung-i...aCables_JN&hash=item35b3d8fd9c#ht_1429wt_1139
but, if you put the jig in, the phone sould start whit download mode.. normally i do that whit sgs2, you can disconnect the jig and connect the phone whit the normal usb cable.. phone stay in download mode, and you can flash..
you can try it out before you flash the bootloader.. but i cant give you warranty for that..

I have already rebuilt procedure 3 times and all ok..
Guide:
1. flash over Odin as Pda Bootloader_GS2.tar
2. put the battery out
3. put the battery in and connect the usb jig ( approximately 10 seconds)
4. connect your phone with pc and flash via Odin as Pda Bootloader_N7000.tar..
If your phone does not start, remove and reinsert the battery..
files for Odin:
Sbl.bin from SGS2:
View attachment Bootloader_GS2.rar
Sbl.bin from Note:
View attachment Bootloader_N7000.rar
Unpack these files,before flashing ..

bodivas said:
I have already rebuilt procedure 3 times and all ok..
files for Odin:
Sbl.bin from SGS2:
http://www.multiupload.com/971QBMMTHX
Sbl.bin from Note:
http://www.multiupload.com/MQCAFDXURN
m_adnan,
add these files in your post..
Click to expand...
Click to collapse
yes, same for me

m_adnan said:
here a link in ebay.. http://www.ebay.co.uk/itm/Samsung-i...aCables_JN&hash=item35b3d8fd9c#ht_1429wt_1139
but, if you put the jig in, the phone sould start whit download mode.. normally i do that whit sgs2, you can disconnect the jig and connect the phone whit the normal usb cable.. phone stay in download mode, and you can flash..
you can try it out before you flash the bootloader.. but i cant give you warranty for that..
Click to expand...
Click to collapse
The auction has ended. Can you show a current one?

The cheapest jig in the world

anonymous572 said:
The cheapest jig in the world
Click to expand...
Click to collapse
:O £1.03 delivered!
Thats ridiculous! Ive ordered one!
I wonder where it's shipped from and how much that costs?!

How do you read the value of the counter?
In step 6, do you flash the original GNote sbl?
Step 7 is confusing - it says to remove the jig, but the jig was not in, because we were connected to the computer for Odin ???

RashaMatt said:
How do you read the value of the counter?
In step 6, do you flash the original GNote sbl?
Click to expand...
Click to collapse
Yes., and then you just restart the phone..Stop!!!

DealExtreme is not the cheapest, just the one with best prices/spread relationship.
I paid my jig 0.80€ shipped off a random chinese seller on ebay

did anyone else tried this? this thread seems to be eating dust!!! any problem with this mod?

hmmmmm
LMAO, not so sure id be wanting to try these steps, i think ya need to spend less time worrying about the counters and more time enjoying ya phone, im sure a safer method will emerge in time.

chowdarygm said:
did anyone else tried this? this thread seems to be eating dust!!! any problem with this mod?
Click to expand...
Click to collapse
I tried and it didn't work for me, but I was not on JK4 to start (maybe that's required). Nothing bad happened though.

graemeg said:
LMAO, not so sure id be wanting to try these steps, i think ya need to spend less time worrying about the counters and more time enjoying ya phone, im sure a safer method will emerge in time.
Click to expand...
Click to collapse
Yep, I ordered a jig yesterday but am coming to the same conclusion - I can live with my nice yellow triangle for now!

bodivas said:
I have already rebuilt procedure 3 times and all ok..
Guide:
1. flash over Odin as Pda sbl.bin from sgs2
2. put the battery out
3. put the battery in and connect the usb jig ( approximately 10 seconds)
4. connect your phone with pc and flash via Odin as Pda Sbl.bin from GNote..
If your phone does not start, remove and reinsert the battery..
files for Odin:
Sbl.bin from SGS2:
Sbl.bin from Note:
Click to expand...
Click to collapse
Any chance you can upload these files again?

@arigosh: On Intratech thread you can find both the old and the new bootloader for S2
http://forum.xda-developers.com/showthread.php?t=1075278

I tried and posted the update on this Q&A before, it works on gNote and I have tried this twice.
Here's the link.
http://forum.xda-developers.com/showthread.php?t=1514002&highlight=remove+triangle

arigosh said:
Any chance you can upload these files again?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=19100010&postcount=4

You could flash a rooted ics build. Then run triangleaway. Then reflash gingerbread from cwm. Thats what i did. Now have 0 again and no triangle
Sent from my GT-N7000 using XDA

My Galaxy Tab GT-P1000 stop working

hi Guys
While im Flashing GB-Stock-Safe-v5 with odin
the usb connection removed and i powered it off after that my tab never open and always black ... what happen and what is the solution please ...
i'm from egypt btw

Download mode works ?
Odin recognizes G TAB ?
Retry to flash with odin .pit file in PIT field and Stock safe .tar file in PDA

nothing works it black ...
not connected with any progra even odin
and i put it more than 4 hours on charge and nothing alsoo happen
it's not mine i try to help
i need advice

Try this
http://forum.xda-developers.com/showthread.php?t=1133590

[Q] {Q} Urgent Unbricking of SAMSUNG GALAXY TAB 4 ( 7 inch )

hello guys bit new here, i have tried rooting my device via ODIn coz vroot dint work and couldnt understand the reason since it was in CHINESE.
for now the device is stuck at "firmware problem need to upgrade it via kies mode" thogh i have tried doing the same through kies and kies 3 but wasnt succeful.
Please help as i am in urgent need of tablet.
the model no is SM T 231

Hi,
I will have your thread moved to your device section.
Good luck!

Moved to the correct forum.
Have you tried to flash a stock ROM from Odin in Download Mode? (not kies)

orangekid said:
Moved to the correct forum.
Have you tried to flash a stock ROM from Odin in Download Mode? (not kies)
Click to expand...
Click to collapse
nope i dont where to download the STOCK and even the procedure

I would DL stock KitKat with this link:
http://www.sammobile.com/firmwares/3/?download=33706
You might have to register to DL but sammobile is the only place I can find a decent DL for it.
Once it downloads unzip the file.
Download Odin 3.09 (you can find a free download everywhere).
Make sure your device is off, then hold vol dn and them power till it says to hit the button for download mode.
Once in download mode plug into your computer and if windows 7 or 8 let the drivers install fully.
If it does not find drivers then look for them manually.
Once you've got the drivers open Odin. It should be a green light on comm 1 or something like that showing a device is plugged into it.
Make sure ONLY F Reset Time and Auto Reboot are checked and nothing else.
Hit the AP button and find the tar file or md5 file you unzipped earlier.
Once it loads up hit start and hope for the best while it flashes.
Warning; read more about this before you try it. Once KitKat flashes do not try to downgrade, but read all about it.
I linked you to firmware for device SM-T231 so that had better be your device. Triple and quadruple check to make sure the file is the right one for your device...
Hope this helps.
Sent from my 1+bacon.

No Signal On dual Sim HELP PLEASE

Hi Everyone,
If i used only one sim in my grand2 7102 i never faced any problem but if i put second sim in my phone i will not get any signal on both even in 2g or 3g mode only i get a notification emergency calls only on both sim Please help me i am on Kitkat official samsung rom and my phone is rooted please help me
And sorry for my bad english

I have the same problem, but "Emergency Call" notification appears occasionally. Have u tried resetting your phone.
sent from my payphone using Tapatalk

Sorry for my late reply i am little sick from last 2 days now if i use only single sim on my phone i have no problem but if i put second sim in my phone i got only no service or emergency calls only please help me i don't want to stick only with single sim

I post some screen shots regarding my problems

Sharma Manu said:
Sorry for my late reply i am little sick from last 2 days now if i use only single sim on my phone i have no problem but if i put second sim in my phone i got only no service or emergency calls only please help me i don't want to stick only with single sim
Click to expand...
Click to collapse
Flash modem.bin via Odin
sent from my payphone using Tapatalk

spamshark said:
Flash modem.bin via Odin
sent from my payphone using Tapatalk
Click to expand...
Click to collapse
Hi Thanxz for see my problem please tell me which modem file work for me please give me download link and thanxz for your reply

Download these two files and follow the procedure :
Download Odin 3.09 >> http://androidhost.org/PVAIv
Download modem.bin (your version is 4.4.2 so extract only G7102 4.4.2 file) >> https://drive.google.com/file/d/0B10QuJB85-SgdENMSHZvV2xJRms/view?usp=drivesdk
Make sure you have all the necessary USB drivers installed on your PC and use original USB cable and also make sure your phone battery is above 80%.
1. Extract Odin and modem file on your PC
2. Enable USB debugging on your phone
3. Prepare your phone to Downloading Mode by pressing (volume down+ home button+ power button), next press volume UP to continue (now your phone is in downloading mode)
4. Run Odin on your PC, now connect USB cable
(At this point when you connect your phone, Odin will show a blue box, so that the connection is successful and now you can proceed)
5. Click check box in front of CP, click CP and browse your "modem.bin" file
6. Click start.
If it's successful it will show a success and Pass message.
Please note: I'm not responsible if you break or brick your phone. Don't click any other option/button in Odin other than mentioned.
: sent from a Payphone using Tapatalk

spamshark said:
Download these two files and follow the procedure :
Download Odin 3.09 >> http://androidhost.org/PVAIv
Download modem.bin (your version is 4.4.2 so extract only G7102 4.4.2 file) >> https://drive.google.com/file/d/0B10QuJB85-SgdENMSHZvV2xJRms/view?usp=drivesdk
Make sure you have all the necessary USB drivers installed on your PC and use original USB cable and also make sure your phone battery is above 80%.
1. Extract Odin and modem file on your PC
2. Enable USB debugging on your phone
3. Prepare your phone to Downloading Mode by pressing (volume down+ home button+ power button), next press volume UP to continue (now your phone is in downloading mode)
4. Run Odin on your PC, now connect USB cable
(At this point when you connect your phone, Odin will show a blue box, so that the connection is successful and now you can proceed)
5. Click check box in front of CP, click CP and browse your "modem.bin" file
6. Click start.
If it's successful it will show a success and Pass message.
Please note: I'm not responsible if you break or brick your phone. Don't click any other option/button in Odin other than mentioned.
: sent from a Payphone using Tapatalk
Click to expand...
Click to collapse
Thankz bro for your Guide and sorry for my late reply i follow your guide but unable to resolve my problem only airtel and vodafone sims get network i tried reliance gsm,aircel,bsnl,idea all sims get network only for 2 minutes and then network are gone in only emergency mode.
Hope you understand my problem

If ur problem is not solved then 1st format your phone then download latest firmware available for ur device extract firmware file then go to odin connect to pc via an usb cable and go to download mode by pressing volume down+home button+power button together and then u will see an android icon after this u need to press volume up button to go to download mode then select ap option in odin (Note:- U need to check only ap option and select the tar.md5 file that u've get from firmware file after extract.)then click start button it will take time about 10 to 15 minutes. After pass msg u will see that your phone automatically rebooted and it is booting and after 2 or 3 mins complete your setup and check those sim Cards which is not working for u.(I Think Surely It Should Work For You)