hi Guys
While im Flashing GB-Stock-Safe-v5 with odin
the usb connection removed and i powered it off after that my tab never open and always black ... what happen and what is the solution please ...
i'm from egypt btw
Download mode works ?
Odin recognizes G TAB ?
Retry to flash with odin .pit file in PIT field and Stock safe .tar file in PDA
nothing works it black ...
not connected with any progra even odin
and i put it more than 4 hours on charge and nothing alsoo happen
it's not mine i try to help
i need advice
Try this
http://forum.xda-developers.com/showthread.php?t=1133590
Related
i change the update PDA and PIT files By Odin application but the mobile and Odin application is hung after 30 min i disconnect the usb cable but the mobile not work never never ,,, and i can not access to download mode
please help me how i can access to download mode for change PDA and PIT files
please help me pleaseeeeee
I dont know what you were trying to do using a pit file with odin. Usually flashing a new rom (pda file), a pit file is not needed. Stick with the default odin settings.
As for your current predicament, go get a usb jig from ebay. The ones that work for the Galaxy S/S2 should get you into download mode.
Best of luck
why did you open two threads about the very same thing? i understand your frustration but this isn't helping.
ababodan said:
i change the update PDA and PIT files By Odin application but the mobile and Odin application is hung after 30 min i disconnect the usb cable but the mobile not work never never ,,, and i can not access to download mode
please help me how i can access to download mode for change PDA and PIT files
please help me pleaseeeeee
Click to expand...
Click to collapse
As been posted buy recovery USB jig to get download mode flash stock rom with Odin and follow instructions dont make them up .
jje
How can I buy this jig as soon as
i now want bay from ebay site
can you told me how i can make this jig
i am from saudi arabia
If you want to try and build it then there is a thread that list all the Samsung pins and resistors for the service functions. I don't have the url but try and google it
Good luck
Sent from my GT-I9100 using Tapatalk
Just take a micro-usb plug, cut it open and connect pins 4 & 5 with a 301kΩ 1% resistor.
I was supposed to unpack the tarfile from the zip, but since my computer decided to not recognize the zip and using the rar icon I thought it was the tar itself and flashed it only to realise my mistake as Odin said the flash failed. As of right now, every time I start my device, it says "Firmware upgrade encountered and issue. Please select recovery mode in Kies & try again." and shows a picture that looks like *Phone**Triangle**Computer*.
Kies emergency recovery does not recognize the device.
Trying to start the phone in recovery mode takes me to the *Phone**Triangle**Computer*.
Download mode > Flashing a stock rom = fail (Yes, it's unpacked this time)
Any suggestions? Thanks in advance.
P.S. Now before anyone bothers to help me out here.. I know.. I'm an idiot, and anyone who takes his or her time to help out here is my hero for the rest of my life <3 D.S.
Try to flash stock firmware with a pit file search for pit file in original development section for you device model
armedking said:
Try to flash stock firmware with a pit file search for pit file in original development section for you device model
Click to expand...
Click to collapse
Is there even a pit-file for 9505 yet?
I didn't find it if there is one.
Trying to flash a stock in just a few minutes, when the download is complete. If it does not work, I'll try to find a pit.
Thanks for the reply <3
For the i9500 ther is i think dont know about i9505 try asking a dev and there is a thread here on page two I think somebody had same problem like you he fixt it changing usb poort and original usb cabel helpt him try to do that and flash stock firmware without pit file first hope you get it sort al out buddy
PixelPatrik said:
Is there even a pit-file for 9505 yet?
I didn't find it if there is one.
Trying to flash a stock in just a few minutes, when the download is complete. If it does not work, I'll try to find a pit.
Thanks for the reply <3
Click to expand...
Click to collapse
see my sig for pit file with odin :good:
Alright, so I got a lot further this time.
I figured out how to get into Download mode again, suddenly I need to press and hold the combo a little while longer than I did before, or it will go to *phone**triangle**computer*.
I got the official firmware into PDA in Odin 3.07 this time around and connected my phone to the computer after I loaded PDA.
I then pressed start and VOILA!!! Thanks fellas!
You welcome enjoy
PixelPatrik said:
I was supposed to unpack the tarfile from the zip, but since my computer decided to not recognize the zip and using the rar icon I thought it was the tar itself and flashed it only to realise my mistake as Odin said the flash failed. As of right now, every time I start my device, it says "Firmware upgrade encountered and issue. Please select recovery mode in Kies & try again." and shows a picture that looks like *Phone**Triangle**Computer*.
Kies emergency recovery does not recognize the device.
Trying to start the phone in recovery mode takes me to the *Phone**Triangle**Computer*.
Download mode > Flashing a stock rom = fail (Yes, it's unpacked this time)
Any suggestions? Thanks in advance.
P.S. Now before anyone bothers to help me out here.. I know.. I'm an idiot, and anyone who takes his or her time to help out here is my hero for the rest of my life <3 D.S.
Click to expand...
Click to collapse
yes u need the pit file while flashing
Guys I was willing to flash CF Auto Root on my i9505, but It stucks at PIT Mapping, in download mode when process gets started there's another entry appeares below "emmc burst mode enabled" which is Start 224, 1440, now my phone is stucked to i9505 logo, and even trying to flash newest firmware gets stucked in PIT file Mapping, I can't do any thing to my phone, only it's able to reach to download mode, and nothing else, it doesn't boot to recovery either, everything gets stuck to PIT Mapping, my note 2 running well on same computer
Alipk52 said:
Guys I was willing to flash CF Auto Root on my i9505, but It stucks at PIT Mapping, in download mode when process gets started there's another entry appeares below "emmc burst mode enabled" which is Start 224, 1440, now my phone is stucked to i9505 logo, and even trying to flash newest firmware gets stucked in PIT file Mapping, I can't do any thing to my phone, only it's able to reach to download mode, and nothing else, it doesn't boot to recovery either, everything gets stuck to PIT Mapping, my note 2 running well on same computer
Click to expand...
Click to collapse
try another Odin or firmware
try different port
try different cable
I never had problems with Odin
pda4g said:
try another Odin or firmware
try different port
try different cable
I never had problems with Odin
Click to expand...
Click to collapse
I'd tried your suggested option no.1, 2, with USB cable I will find that, but my Note 2 is still working perfectly with what I have, I thought Odin supported version maybe different for different devices, so I changed among 3.04, 3.07 & 3.09 I'll see about the cable
pda4g said:
try another Odin or firmware
try different port
try different cable
I never had problems with Odin
Click to expand...
Click to collapse
Hey bro...problem solved, and the issue was the one i have ignored i.e. Data Cable, grabed my friend's Cable and Odin started working as it should, my Note 2 is too good...accept everything in any condition...where as i9505 needs everything perfect
Ok first of all i really need help !
I tried to root my Samsung galaxy S5 SM-G901F from Singapore (Singtel) and I went on androidxda for my phone and download everything and did step by step but when I press start , halfway it said failed and it said Firmware upgrade encountered an issue.Please select recovery mde in Kies and try again. I tried to go to recovery mode but to no avail and Kies doesnt detect my phone. PLEASE HELP ME !!
the only thing i can hope now is to download the firmware for my phone and telco and try to use odin and load is it guys? Please help me, i really need to fix this.
can someone help me ? now that i downoaded the firmware when it's checking the md5 , the odin stops responding. PLEASE HELP ME...
fitris97 said:
can someone help me ? now that i downoaded the firmware when it's checking the md5 , the odin stops responding. PLEASE HELP ME...
Click to expand...
Click to collapse
If you have not already tried this then turn off the phone and pull the battery out and leave it out for a few minutes.
Put the battery back in and try to boot the phone normally, if that fails then pull the battery again and leave it as before then follow the below process.
Put the battery back in and boot the phone into download mode
Start Odin and find the md5 file under PDA
Let Odin run the file check
Once Odin has done the check connect your phone to your PC (don't connect your phone before this step) and wait for the ID com to highlight usually in blue
Once highlighted click Start and the firmware should flash onto your phone.
ag4751 said:
If you have not already tried this then turn off the phone and pull the battery out and leave it out for a few minutes.
Put the battery back in and try to boot the phone normally, if that fails then pull the battery again and leave it as before then follow the below process.
Put the battery back in and boot the phone into download mode
Start Odin and find the md5 file under PDA
Let Odin run the file check
Once Odin has done the check connect your phone to your PC (don't connect your phone before this step) and wait for the ID com to highlight usually in blue
Once highlighted click Start and the firmware should flash onto your phone.
Click to expand...
Click to collapse
Oh my god !! I can't never thank you enough !! It finally worked and it started flashing the firmware.All is good now , thank you !!
hello guys bit new here, i have tried rooting my device via ODIn coz vroot dint work and couldnt understand the reason since it was in CHINESE.
for now the device is stuck at "firmware problem need to upgrade it via kies mode" thogh i have tried doing the same through kies and kies 3 but wasnt succeful.
Please help as i am in urgent need of tablet.
the model no is SM T 231
Hi,
I will have your thread moved to your device section.
Good luck!
Moved to the correct forum.
Have you tried to flash a stock ROM from Odin in Download Mode? (not kies)
orangekid said:
Moved to the correct forum.
Have you tried to flash a stock ROM from Odin in Download Mode? (not kies)
Click to expand...
Click to collapse
nope i dont where to download the STOCK and even the procedure
I would DL stock KitKat with this link:
http://www.sammobile.com/firmwares/3/?download=33706
You might have to register to DL but sammobile is the only place I can find a decent DL for it.
Once it downloads unzip the file.
Download Odin 3.09 (you can find a free download everywhere).
Make sure your device is off, then hold vol dn and them power till it says to hit the button for download mode.
Once in download mode plug into your computer and if windows 7 or 8 let the drivers install fully.
If it does not find drivers then look for them manually.
Once you've got the drivers open Odin. It should be a green light on comm 1 or something like that showing a device is plugged into it.
Make sure ONLY F Reset Time and Auto Reboot are checked and nothing else.
Hit the AP button and find the tar file or md5 file you unzipped earlier.
Once it loads up hit start and hope for the best while it flashes.
Warning; read more about this before you try it. Once KitKat flashes do not try to downgrade, but read all about it.
I linked you to firmware for device SM-T231 so that had better be your device. Triple and quadruple check to make sure the file is the right one for your device...
Hope this helps.
Sent from my 1+bacon.