Database Users

[Q] CMW 3.0.0.6 + pack's Battery mods, unable to flash mod

Okay, I'm running Stock Mysense 2.2.1, rooted, S=off, super CID, and unlocked SIM. I got Clockworkmod 3.0.0.6 here (http://forum.xda-developers.com/showthread.php?t=944681), and I installed Faux123's OC kernel from here (http://forum.xda-developers.com/showthread.php?t=941141). So far, not even a hiccup.
I didn't like the stock battery bar, and I saw that pack had made some battery icon mods, so I decided to install one from here (http://forum.xda-developers.com/showthread.php?t=852013). Even though the mod was designed for Mysense and Mysense ports running CWM pre-3.0, I read in the CWM 3.0.0.6 forum I posted above that 3.0.0.6 was designed to bridge Gingerbread CWM with 2.5.1.4, since it runs ext3 and ext4 (at least I that's what I thought it meant).
First, I tried flashing CWM 2.5.1.4, which it did successfully, but on reboot, I got the red ! symbol, so I went back to 3.0.0.6. When I try to install pack's mod using 3.0.0.6, I get the following messages:
Finding update package...
Opening update package...
Installing update...
Amend scripting (update-script) is no longer supported.
Amend scripting was deprecated by Google in Android 1.5.
It was necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery. Please with to Edify scripting (updater-script and update-binary) to create working zip packages.
Installation aborted.
I'm not really sure what I did wrong, anyone have any ideas? Any help you can provide is very much appreciated.

corruptsmurf said:
Okay, I'm running Stock Mysense 2.2.1, rooted, S=off, super CID, and unlocked SIM. I got Clockworkmod 3.0.0.6 here (http://forum.xda-developers.com/showthread.php?t=944681), and I installed Faux123's OC kernel from here (http://forum.xda-developers.com/showthread.php?t=941141). So far, not even a hiccup.
I didn't like the stock battery bar, and I saw that pack had made some battery icon mods, so I decided to install one from here (http://forum.xda-developers.com/showthread.php?t=852013). Even though the mod was designed for Mysense and Mysense ports running CWM pre-3.0, I read in the CWM 3.0.0.6 forum I posted above that 3.0.0.6 was designed to bridge Gingerbread CWM with 2.5.1.4, since it runs ext3 and ext4 (at least I that's what I thought it meant).
First, I tried flashing CWM 2.5.1.4, which it did successfully, but on reboot, I got the red ! symbol, so I went back to 3.0.0.6. When I try to install pack's mod using 3.0.0.6, I get the following messages:
Finding update package...
Opening update package...
Installing update...
Amend scripting (update-script) is no longer supported.
Amend scripting was deprecated by Google in Android 1.5.
It was necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread based recovery. Please with to Edify scripting (updater-script and update-binary) to create working zip packages.
Installation aborted.
I'm not really sure what I did wrong, anyone have any ideas? Any help you can provide is very much appreciated.
Click to expand...
Click to collapse
The reason you get that error is because the update script is made with a amend script rather than a edify script. In order to flash something with the old script you must first flash the 2.5.1.2 version of CwM recovery. Then after you flash your mod you can flash back to 3.0.0.6 recovery. Hope this helps clarify it for you

you can use cwm to get the 2.5.1.2 recovery on there...just select older versions of cwm and select 2.5.1.2...once your done flashing whatever...feel free to flash the 3.0.0.6 recovery again

Why is cwr 3.0.0.6 not persistent?

I have installed it while in '0.5, and when I go back in, its always gone. Has rom manager been updated for this? Because I think that's they problem. I choose CWR from within rom manager (which is .0.5), and when it reboots I am back in 0.5.
Just wondering if there was an update or a fix/patch I missed.
Sent from my HTC Glacier using XDA App

I don't know what you are doing, so I will just tell you what I have done.
1) Download 3.0.0.6 and save to sd.
2) Flash 3.0.0.5 from within rom manager.
3) reboot into recovery 3.0.0.5.
4) Flash 3.0.0.6 file
5) reboot until rom loaded
6) Once rom loaded reboot again into recovery and should be 3.0.0.6 (do not reflash 3.0.0.5 again, otherwise will see 3.0.0.5 in recovery again)
If that doesn't work, I don't know what to tell you except to use adb.
Sent from my HTC Glacier using XDA App

syntropic said:
I have installed it while in '0.5, and when I go back in, its always gone. Has rom manager been updated for this? Because I think that's they problem. I choose CWR from within rom manager (which is .0.5), and when it reboots I am back in 0.5.
Just wondering if there was an update or a fix/patch I missed.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Sometimes when you flash a new ROM, CWM 3.0.0.6 doesn't stick. When that happens, just downlaod and install a clean CWM recovery file again from here (http://forum.xda-developers.com/showthread.php?t=944681) and follow instructions and 3.0.0.6 should stick.

syntropic said:
I have installed it while in '0.5, and when I go back in, its always gone. Has rom manager been updated for this? Because I think that's they problem. I choose CWR from within rom manager (which is .0.5), and when it reboots I am back in 0.5.
Just wondering if there was an update or a fix/patch I missed.
Click to expand...
Click to collapse
I'm not sure what the other posters mean when they say CWM doesn't "stick". The problem is that 3.0.0.6 is not an officially supported version, and therefore even when it's installed, ROM Manager will continue to say you have 2.5 or 3.0.0.5 installed. Once you've successfully installed 3.0.0.6, don't worry what ROM Manager says about versions. Just boot into recovery and you'll see that 3.0.0.6 is there.

I flashed once and its been there ever since. I dont see y its resetting
Sent from my HTC Glacier using XDA Premium App

charlieb620 said:
I flashed once and its been there ever since. I dont see y its resetting
Click to expand...
Click to collapse
It's not resetting. He just thinks it is since 3.0.0.5 is the latest version supported by ROM Manager.

TeeJay3800 said:
It's not resetting. He just thinks it is since 3.0.0.5 is the latest version supported by ROM Manager.
Click to expand...
Click to collapse
I actually realize that Rom manager merely says 3.0.0.5 and 0.6 is actually "installed". The problem is it doesn't "stick". Even if I boot from recovery not using rom manager, 0.5 is always still there. I am going to download it again and see what happens.
Thx!
Sent from my HTC Glacier using XDA App

Just an FYI for any who had any problems.
Originally, the file I had a link to (and downloaded) was something like clockworkmod-recovery-3.0.0.6.zip (or similar). This apparently is a one shot flash to put you into the 3.0.0.6 recovery while you are already in the 3.0.0.5 recovery. The file that I just downloaded (given above in this thread) actually creates a permanent 0.6 recovery. Just install the file from 0.5 recovery, reboot, and then flash clockworkmod recovery from within rom manager.
At that point, whenever you boot into recovery from RM, it be 3.0.0.6. NOTE: RM will continue to say that you have 3.0.0.5 installed, so ignore that.... 0.6 will be installed.
Sent from my HTC Glacier using XDA App

based on your original post (unless I'm miss reading it) you are flashing the zip file from within recovery, when phone reboots you are going into ROM Manager and flashing CWR which shows as 3.0.0.5 if you use the method in the link "NeverAlwaysEver" posted 3.0.0.6 over writes 3.0.0.5 so it should stick... however I did notice after flashing the newest version of 3.0.0.6 (the one that keeps phone from booting into recovery if plugged in while off) if I selected 3.0.0.5 in ROM Manager it would flash back to 3.0.0.5, I don't know why but that is the only one I have had the same problem you laid out.

One thing I realize is all the posts about these topics can be confusing because it is not always clear whether a poster is starting that they "flashed" cwr, ot merely booted into cwr.
But my problem was solved when I flashed/installed the file from the link by NeverAlwaysEver above when I was in CWR (3.0.0.5). This file is a substitute file which RM uses to flash to a new recovery. So when you flash again from within RM, you are "installing" the 3.0.0.6 recovery. I didn't write RM, so I do not know why it doesn't recognize that 3.0.0.6 is installed and report this as the actual version after you do this, but its a minor issue.
I dint know what zip version you are referring to other than the one in this thread and the "one-shot" one I had (which I got from SoltyPK in some post), but the later one could have utility if you need more than 2 recovery versions (e.g., if for some reason you wanted to have the ability to use the stock recovery (2.5.1.7), cwr 3.0.0.5, and cwr 3.0.0.6., the last one you actually install while in 3.0.0.5, and it thereupon immediately puts you into 3.0.0.6.
Sent from my HTC Glacier using XDA App

syntropic said:
Just an FYI for any who had any problems.
Originally, the file I had a link to (and downloaded) was something like clockworkmod-recovery-3.0.0.6.zip (or similar). This apparently is a one shot flash to put you into the 3.0.0.6 recovery while you are already in the 3.0.0.5 recovery. The file that I just downloaded (given above in this thread) actually creates a permanent 0.6 recovery. Just install the file from 0.5 recovery, reboot, and then flash clockworkmod recovery from within rom manager.
At that point, whenever you boot into recovery from RM, it be 3.0.0.6. NOTE: RM will continue to say that you have 3.0.0.5 installed, so ignore that.... 0.6 will be installed.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Good to know you have it straighten out now hehe I wouldn't mind if you hit thanks button

RavenWulf said:
based on your original post (unless I'm miss reading it) you are flashing the zip file from within recovery, when phone reboots you are going into ROM Manager and flashing CWR which shows as 3.0.0.5 if you use the method in the link "NeverAlwaysEver" posted 3.0.0.6 over writes 3.0.0.5 so it should stick... however I did notice after flashing the newest version of 3.0.0.6 (the one that keeps phone from booting into recovery if plugged in while off) if I selected 3.0.0.5 in ROM Manager it would flash back to 3.0.0.5, I don't know why but that is the only one I have had the same problem you laid out.
Click to expand...
Click to collapse
If you mean CWM 3.0.0.6 off mode charging from this thread (http://forum.xda-developers.com/showthread.php?t=1014554), it says that one is modified from the original CWM 3.0.0.6 and not the newest CWM 3.0.0.6 that TrueBlue_Drew posted (link I gave in previous post). I haven't tried that off mode charging CWM modified from original CWM .6 but maybe that is the reason why it goes back to .5.

[Q] Cannot Install Rom with CWM .... Worked before!

Hi,
Installed CM Nightlies and now wanted to install pre 2.3 roms.
When I select the zip from CWM I'm getting and error saying there is a scripting error and that edify is not supported from 1.5 etc .... hopefully its a common error.
I tried reflashing 3.2.0.0 recovery but didnt help.
Is there an easy solution for this? As I cannot installed any ROM.

You need Clockworkmod 2.5 for this. So you can either change your main clockworkmod Recovery, or, you can use ROM Manager App from within CM7 ROM. Open ROM Manager, then select "Install CLockworkmod Recovery", then select "Reboot into Recovery" from within the ROM Manager App. This will take you to Clockworkmod 2.5, and you can install Sense based ROMs normally.
Or, if you wish to replace your "main" Clockworkmod 3.x with 2.5.0.7 (Not from within ROM Manager), the Recovery.img file can be found here:
http://www.multiupload.com/PSIIJNBD4E

Ah ..... easy solution then....
So my quesiton is originally I was able to install roms with 3.x Recovery and now I can't, how come this has happened?
I take it that going back to 2.5.0.7 I'll be stuck with the off-line charging bug to?
Thanks for the great help!

This is because Sense ROMs (and Radios) use an older scripting technique (called Amend, which is no longer supported in Clockworkmod 3.x). All the new ROMs like CM have moved to the newer scripting technique called Edify.
And Yes, any version below 3.1.0.2, and you will be stuck with offline charging bug, Which is why it is probably better to install this via Clockworkmod 2.5.0.7 using ROM Manager. This way, you wont get the offline charging bug, and you keep to get both Clockworkmods, 2.x and 3.x

Htc wildfire no functional

I have a HTC Wildfire v2.2.1 and tried to make him Alpharevx root method. After that I tried to put another room, the one here called CyanogenMod 7 for the HTC Wildfire V7.0.3 (5 May 2011). Failed update and now my phone only opens up the boot menu and write this:
---AlphaRev---
BUZZ PUT SHIP S-OFF
HBOOT-6.01.1002
MICROP-0622
TOUCH-PANEL-SYN3KY_01
RADIO-3.35.20.10
Nov 17 2010,12:08:53
Help me, what I can do to make it functional???
I am new to android. Please help me rewrite software or do not know them, but I want to go phone again.
Thank you in advance

Follow this:
http://forum.xda-developers.com/showthread.php?t=1130044

I followed exactly all the steps that, after that I wanted to put another room and now my phone only goes, do not understand? only opens in the boot menu
The phone no longer can open to enter the phone menu

Okay so what I'm getting from your post is that your phone only boots into HBOOT?
If so, do you have any options below such as Fastboot, Recovery,...?

I fastboot,recovery,clear storage and simlock
If you press the power on loading hboot I write something and it says no image or wrong image

if you get into recovery clockworkmod recovery v3.0.0.6 i have the following options:
- reboot system now
- apply update from sdcard
- wipe data/factory reset
- wipe cache partition
- install zip from sdcard
- backup and restore
- mounts and sorage
- advanced
- power off

Place the Cyanogenmod 7 ROM ZIP file on your SD Card. Then in Recovery, Select "Wipe Data/Factory Reset". (Use Trackpad to select in Recovery, not the Power Key). Confirm it by saying Yes.
Then select "Install Zip from SDCard", and select the Cyanogenmod 7 ROM Zip file on your SD Card. It will install the ROM, and after install, select "Reboot System Now". It will boot into your new ROM installation.

I tried to put the original rum Froyo 2.2.1
r1-update-modacocustomrom-froyo-buzz-withadditions-signed.zip
and look what my friend writes:
Installing update...
Amend scripting (update script) is no longer supported.
Amend scripting was deprecated by Google in Android 1.5
It was necessary to remove it when upgrading to the ClockworkMod 3.0
Gingerbread based recovery.
Please switch to Edify scripting (updater-script and update-binary)
to create working update zip packages.
Installation aborted
3xeno i will try and what you said

If still not solved, use different version of recovery. Upgrade to 3.1.0.2 or even 4.x recovery.
I think i heard similar issue with that recovery.
Sent from my HTC Wildfire using XDA App

Dude
For installing cm7 you need 3.x or + recovery and for installing froyo roms you need 2.x recovery.
Sent from my HTC Wildfire using XDA App

3xeno i did as you said Select "Wipe Data/Factory Reset"
Formating/ data...
Formating / cache...
Formatting / sd-ext
No app2sd partition found. Skipping format of / sd-ext
Formatting / sdcard/.android_secure...
Data wipe complete.
next Install Zip from SDCard
Installing: /sdcard/update-cm-7.0.3-buzz-signed.zip
Finding update package...
Opening update package...
Installing update...
and has since written in 15min Installing update...How long should I wait?
bharatgaddameedi please help me that much more me that you break and you are pieces of devils.
tell me what to do and where you downloaded that I need?

Go to this link for 2.x recovery and 4.x recovery. (Attached files)
http://forum.xda-developers.com/showpost.php?p=15226717&postcount=68
Install 4.x recovery for going with cm7 and install 2.x recovery for froyo roms.
Installing recovery is through pc49img method from that link. Same as the guide linked in this thread, but just file is different.
Sent from my HTC Wildfire using XDA App

Thanks for all who tried to help me, but I especially thank bharatgaddameedi weeeeeeeeeeeppppaaaaaa worked, I did as you told me you,
thank you very much,much,much god give you health.

I'm glad you got your Wildfire up and running
Sent from my HTC Wildfire using XDA Premium App

[Q] Problems with going into ClockworkMod Recovery mode

I have rooted my HTC Wildfire and now i need to get CyanogenMod 7 on it ...
i have downloaded Rom manager i flashed ClockworkMod Recovery mode into the phone...
But when i enter Recovery mode its just the regular Recovery screen that comes up...
I have tryied this 3 times and it still wont work (also after resetting the whole phone)
How do i get ClockworkMod Recovery mode on my phone then ?
EDIT :
I installed CM7 via ROM MANEGER and now i need to install Google Apps.
But when i go into Revolutionary CMW (Revovery mode) and try to Select "apply update from sdcard" all the text just disapers and nothing new is comming up...
What do i do ?

Flashing from rom manager will not give a permanent recovery for wildfire (when there is no custom recovery at first). But such kind of process is there for other phones.
Sent from my Blade using XDA App

So how to get cm7 based recovery . Cm7 needs CWM 3.x or higher recovery. The answer depends on whether u have used unrevoked or alpharev (=revolutionary) to root ur phone.
If u used unrevoked, u must be having some recovery. Here u can use rom manager to flash 3.x recovery and reboot to recovery from within rom manager to temporarily get 3.x + recovery which can flash cm7. Or u can download a 3.x + recovery.img file and use unrevoked again to flash that recovery. Here u should select the custom recovery option in unrevoked and point to ur downloaded file.
And if u have used revolutionary, there will be an option during the revolutionary process where to install custom recovery or not. U can choose to install. Or once u have s-off, fastboot flashing will be enabled. So u can flash a recovery from fastboot with the help of a PC. This is more preferrable. There are also other options. If u search the dev forums u will see posts explaining to install recovery through "pc49img" method. Also "flash_image" method. Both these wont need a pc unlike all the above methods.
Sent from my Blade using XDA App

Problem solved but a new one is here
I installed CM7 via ROM MANEGER and now i need to install Google Apps.
But when i go into Revolutionary CMW (Revovery mode) and try to Select "apply update from sdcard" all the text just disapers and nothing new is comming up...
What do i do ?

Choose 'Install Zip from SDCard', not 'Apply update from SDCard'

I have tryied all of them....
inclusive "power down" and not even that works its only removing the text and nothing new comes up

Use the trackball for selecting stuff in Clockworkmod. Not the Power button.

WOW FAIL BY ME !!!
Sry guys im still noob at rooting
Thank you for the help.
PROBLEM SOLVED!