I have installed it while in '0.5, and when I go back in, its always gone. Has rom manager been updated for this? Because I think that's they problem. I choose CWR from within rom manager (which is .0.5), and when it reboots I am back in 0.5.
Just wondering if there was an update or a fix/patch I missed.
Sent from my HTC Glacier using XDA App
I don't know what you are doing, so I will just tell you what I have done.
1) Download 3.0.0.6 and save to sd.
2) Flash 3.0.0.5 from within rom manager.
3) reboot into recovery 3.0.0.5.
4) Flash 3.0.0.6 file
5) reboot until rom loaded
6) Once rom loaded reboot again into recovery and should be 3.0.0.6 (do not reflash 3.0.0.5 again, otherwise will see 3.0.0.5 in recovery again)
If that doesn't work, I don't know what to tell you except to use adb.
Sent from my HTC Glacier using XDA App
syntropic said:
I have installed it while in '0.5, and when I go back in, its always gone. Has rom manager been updated for this? Because I think that's they problem. I choose CWR from within rom manager (which is .0.5), and when it reboots I am back in 0.5.
Just wondering if there was an update or a fix/patch I missed.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Sometimes when you flash a new ROM, CWM 3.0.0.6 doesn't stick. When that happens, just downlaod and install a clean CWM recovery file again from here (http://forum.xda-developers.com/showthread.php?t=944681) and follow instructions and 3.0.0.6 should stick.
syntropic said:
I have installed it while in '0.5, and when I go back in, its always gone. Has rom manager been updated for this? Because I think that's they problem. I choose CWR from within rom manager (which is .0.5), and when it reboots I am back in 0.5.
Just wondering if there was an update or a fix/patch I missed.
Click to expand...
Click to collapse
I'm not sure what the other posters mean when they say CWM doesn't "stick". The problem is that 3.0.0.6 is not an officially supported version, and therefore even when it's installed, ROM Manager will continue to say you have 2.5 or 3.0.0.5 installed. Once you've successfully installed 3.0.0.6, don't worry what ROM Manager says about versions. Just boot into recovery and you'll see that 3.0.0.6 is there.
I flashed once and its been there ever since. I dont see y its resetting
Sent from my HTC Glacier using XDA Premium App
charlieb620 said:
I flashed once and its been there ever since. I dont see y its resetting
Click to expand...
Click to collapse
It's not resetting. He just thinks it is since 3.0.0.5 is the latest version supported by ROM Manager.
TeeJay3800 said:
It's not resetting. He just thinks it is since 3.0.0.5 is the latest version supported by ROM Manager.
Click to expand...
Click to collapse
I actually realize that Rom manager merely says 3.0.0.5 and 0.6 is actually "installed". The problem is it doesn't "stick". Even if I boot from recovery not using rom manager, 0.5 is always still there. I am going to download it again and see what happens.
Thx!
Sent from my HTC Glacier using XDA App
Just an FYI for any who had any problems.
Originally, the file I had a link to (and downloaded) was something like clockworkmod-recovery-3.0.0.6.zip (or similar). This apparently is a one shot flash to put you into the 3.0.0.6 recovery while you are already in the 3.0.0.5 recovery. The file that I just downloaded (given above in this thread) actually creates a permanent 0.6 recovery. Just install the file from 0.5 recovery, reboot, and then flash clockworkmod recovery from within rom manager.
At that point, whenever you boot into recovery from RM, it be 3.0.0.6. NOTE: RM will continue to say that you have 3.0.0.5 installed, so ignore that.... 0.6 will be installed.
Sent from my HTC Glacier using XDA App
based on your original post (unless I'm miss reading it) you are flashing the zip file from within recovery, when phone reboots you are going into ROM Manager and flashing CWR which shows as 3.0.0.5 if you use the method in the link "NeverAlwaysEver" posted 3.0.0.6 over writes 3.0.0.5 so it should stick... however I did notice after flashing the newest version of 3.0.0.6 (the one that keeps phone from booting into recovery if plugged in while off) if I selected 3.0.0.5 in ROM Manager it would flash back to 3.0.0.5, I don't know why but that is the only one I have had the same problem you laid out.
One thing I realize is all the posts about these topics can be confusing because it is not always clear whether a poster is starting that they "flashed" cwr, ot merely booted into cwr.
But my problem was solved when I flashed/installed the file from the link by NeverAlwaysEver above when I was in CWR (3.0.0.5). This file is a substitute file which RM uses to flash to a new recovery. So when you flash again from within RM, you are "installing" the 3.0.0.6 recovery. I didn't write RM, so I do not know why it doesn't recognize that 3.0.0.6 is installed and report this as the actual version after you do this, but its a minor issue.
I dint know what zip version you are referring to other than the one in this thread and the "one-shot" one I had (which I got from SoltyPK in some post), but the later one could have utility if you need more than 2 recovery versions (e.g., if for some reason you wanted to have the ability to use the stock recovery (2.5.1.7), cwr 3.0.0.5, and cwr 3.0.0.6., the last one you actually install while in 3.0.0.5, and it thereupon immediately puts you into 3.0.0.6.
Sent from my HTC Glacier using XDA App
syntropic said:
Just an FYI for any who had any problems.
Originally, the file I had a link to (and downloaded) was something like clockworkmod-recovery-3.0.0.6.zip (or similar). This apparently is a one shot flash to put you into the 3.0.0.6 recovery while you are already in the 3.0.0.5 recovery. The file that I just downloaded (given above in this thread) actually creates a permanent 0.6 recovery. Just install the file from 0.5 recovery, reboot, and then flash clockworkmod recovery from within rom manager.
At that point, whenever you boot into recovery from RM, it be 3.0.0.6. NOTE: RM will continue to say that you have 3.0.0.5 installed, so ignore that.... 0.6 will be installed.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Good to know you have it straighten out now hehe I wouldn't mind if you hit thanks button
RavenWulf said:
based on your original post (unless I'm miss reading it) you are flashing the zip file from within recovery, when phone reboots you are going into ROM Manager and flashing CWR which shows as 3.0.0.5 if you use the method in the link "NeverAlwaysEver" posted 3.0.0.6 over writes 3.0.0.5 so it should stick... however I did notice after flashing the newest version of 3.0.0.6 (the one that keeps phone from booting into recovery if plugged in while off) if I selected 3.0.0.5 in ROM Manager it would flash back to 3.0.0.5, I don't know why but that is the only one I have had the same problem you laid out.
Click to expand...
Click to collapse
If you mean CWM 3.0.0.6 off mode charging from this thread (http://forum.xda-developers.com/showthread.php?t=1014554), it says that one is modified from the original CWM 3.0.0.6 and not the newest CWM 3.0.0.6 that TrueBlue_Drew posted (link I gave in previous post). I haven't tried that off mode charging CWM modified from original CWM .6 but maybe that is the reason why it goes back to .5.
Related
i can only boot into clockwork mod recovery using the standard 3 button method. When i use Rom manager or Root manager to go into recovery it takes me into stock android recovery, does anyone know why?
also my epic will not let me flash noobln's rom, it says the file is messed up despite downloading several time?? however I was able to flash the boss rom.
Sounds like you lost your root.
Mine does the same thing concerning using rom manager to boot into recovery. Have to manually boot into recovery. Root is fine though.
Sent from my SPH-D700 using Tapatalk
r2hudson said:
i can only boot into clockwork mod recovery using the standard 3 button method. When i use Rom manager or Root manager to go into recovery it takes me into stock android recovery, does anyone know why?
also my epic will not let me flash noobln's rom, it says the file is messed up despite downloading several time?? however I was able to flash the boss rom.
Click to expand...
Click to collapse
It looks like you used noobnl one click to install the CWM recovery to blm8- if you also want rom manager support you need a kernel that supports it on bml7- you can flash that via the CWM- if you search you will find a stock kernel that has CWM support along with several other roms
jimmyz said:
It looks like you used noobnl one click to install the CWM recovery to blm8- if you also want rom manager support you need a kernel that supports it on bml7- you can flash that via the CWM- if you search you will find a stock kernel that has CWM support along with several other roms
Click to expand...
Click to collapse
What about if using the mixup kernel?
Sent from my SPH-D700 using Tapatalk
sultan.of.swing said:
What about if using the mixup kernel?
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
I don't have it flashed but the latest mixup lists rom manager support- what happens when you try to boot into recovery via rom manager- do you get an "unsigned error"?
jimmyz said:
I don't have it flashed but the latest mixup lists rom manager support- what happens when you try to boot into recovery via rom manager- do you get an "unsigned error"?
Click to expand...
Click to collapse
Yep i get the unsigned error but using the manual method works. Im reading its because i used the 1 click clockwork method. I used noobnls newest final clockwork.
When i did it koushs way it would work with rom manager.
Sent from my SPH-D700 using Tapatalk
sultan.of.swing said:
Yep i get the unsigned error but using the manual method works. Im reading its because i used the 1 click clockwork method. I used noobnls newest final clockwork.
When i did it koushs way it would work with rom manager.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
I might not be understanding your post correctly but I have both methods working - I can manually boot into CWM via three button and also get to CWM via root manager- I used noobnls final and then used it to flash koushs kernel
jimmyz said:
I might not be understanding your post correctly but I have both methods working - I can manually boot into CWM via three button and also get to CWM via root manager- I used noobnls final and then used it to flash koushs kernel
Click to expand...
Click to collapse
Sorry. I am running stock rom. Mixup kernal on top of it with rom manager support. Then have noobnls clockwork flashed on top of mixup kernel.
Last week i went back to stock. I rooted then installed the hacked clockwork then installed koushs kernel to get permanent clockwork and it worked from rom manager as well as the three button way. I then flashed mixup over koushs kernel and that's when it quit working from rom manager.
I am wondering if i can reflash koushs kernel and then mixup because before when i did it mixup didn't support clockwork. I didn't flash koushs way on my new epic.
So basically i would have done this.
Noobnls one click with rom manager and fixed su> koushs kernel> mixup kernel????
Sent from my SPH-D700 using Tapatalk
r2hudson said:
i can only boot into clockwork mod recovery using the standard 3 button method. When i use Rom manager or Root manager to go into recovery it takes me into stock android recovery, does anyone know why?
also my epic will not let me flash noobln's rom, it says the file is messed up despite downloading several time?? however I was able to flash the boss rom.
Click to expand...
Click to collapse
Navigate down to install update.zip and press the home button.
sultan.of.swing said:
Mine does the same thing concerning using rom manager to boot into recovery. Have to manually boot into recovery. Root is fine though.
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Same as above. When entering into stock recovery navigate using the volume down key to install update.zip use the home button to select
sultan.of.swing said:
What about if using the mixup kernel?
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Goto the market download rom manager once installed open it and first option is to install clockwork recovery select SAMSUNG EPIC it will download and install the recovery for you
After it is complete I would do a backup
sultan.of.swing said:
Yep i get the unsigned error but using the manual method works. Im reading its because i used the 1 click clockwork method. I used noobnls newest final clockwork.
When i did it koushs way it would work with rom manager.
Click to expand...
Click to collapse
Delete the update.zip file from the root of your sdcard and open rom manager backup re-install clockwork recovery
sultan.of.swing said:
Sorry. I am running stock rom. Mixup kernal on top of it with rom manager support. Then have noobnls clockwork flashed on top of mixup kernel.
Last week i went back to stock. I rooted then installed the hacked clockwork then installed koushs kernel to get permanent clockwork and it worked from rom manager as well as the three button way. I then flashed mixup over koushs kernel and that's when it quit working from rom manager.
I am wondering if i can reflash koushs kernel and then mixup because before when i did it mixup didn't support clockwork. I didn't flash koushs way on my new epic.
So basically i would have done this.
Noobnls one click with rom manager and fixed su> koushs kernel> mixup kernel????
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
I dont understand but Ill try
Mixup Supports clockwork and rom manager so using market download it and install clockwork recovery.
If you ever have to boot into either STOCK recovery or the THREE FINGER clockwork RECOVERY METHOD.
Navigate to INSTALL UPDATE.ZIP select and you will now be in the proper clockwork recovery
REMEMBER ALWAYS BACKUP
rjmjr69 said:
Navigate down to install update.zip and press the home button.
Same as above. When entering into stock recovery navigate using the volume down key to install update.zip use the home button to select
Goto the market download rom manager once installed open it and first option is to install clockwork recovery select SAMSUNG EPIC it will download and install the recovery for you
After it is complete I would do a backup
Delete the update.zip file from the root of your sdcard and open rom manager backup re-install clockwork recovery
I dont understand but Ill try
Mixup Supports clockwork and rom manager so using market download it and install clockwork recovery.
If you ever have to boot into either STOCK recovery or the THREE FINGER clockwork RECOVERY METHOD.
Navigate to INSTALL UPDATE.ZIP select and you will now be in the proper clockwork recovery
REMEMBER ALWAYS BACKUP
Click to expand...
Click to collapse
Not sure why i didn't try before but i deleted the update.zip that was there and reflash clockwork from rom manager and can now boot to cwm from rom manager. Thank u sir.
Sent from my SPH-D700 using Tapatalk
yeah Same happens to me using Switch pro widget. This new version 1.9 has the ability to reboot to recovery.. everytime I rebooted into recovery, it brought me to stock recovery. Seems like the clock work kept failing to delete the stock recovery, but if I press and hold volume down, on/off and camera it boots into clockwork recovery.
bomix said:
yeah Same happens to me using Switch pro widget. This new version 1.9 has the ability to reboot to recovery.. everytime I rebooted into recovery, it brought me to stock recovery. Seems like the clock work kept failing to delete the stock recovery, but if I press and hold volume down, on/off and camera it boots into clockwork recovery.
Click to expand...
Click to collapse
yeah apparently with the epic, they are still working out the kinks, i got Rom manager functioning correctly, but Root manager still boots into stock recovery. im guessing the devs of these apps will eventually fix this
r2hudson said:
yeah apparently with the epic, they are still working out the kinks, i got Rom manager functioning correctly, but Root manager still boots into stock recovery. im guessing the devs of these apps will eventually fix this
Click to expand...
Click to collapse
From my limited understanding the epic has two recovery locations- one (bml8) is accessed through the 3 button push. The other (bml7) is accessed through adb reboot recovery or rom manager. Use noobnl CWM installer to install to bml8. To use rom manager (to place CWM on bml7) your kernel must support it (i.e. you have to flash to something else other than the stock kernel). hope that makes sense!
In some senses this is nice- if your rom gets messed up you can still access the recovery via the 3 button push
Also before you use rom manager for the first time make sure there is no "update.zip" on the root of your sdcard
Searched, but couldn't find an answer to this. I rooted and installed ROM Manager so I can do a nandroid backup before installing a custom ROM. However, when I press back up in ROM Manager, it restarts and hangs/freezes on the HTC MyTouch 4g splash screen.
What am I doing wrong?
Have you flashed CWM recovery after installing Rom Manager. You must flash the recovery before you can backup/restore or install roms. I almost did that myself but luckily i read the thread concerning it again and flashed REcovery before trying to back up rom.
Yeah, I did that first and the problem remains. I just uninstalled and reinstalled ROM Manager and am about to try "backup current rom" again (unless I should reboot into recovery and back up from clockwork recovery?).
FWIW; Current recovery is ClockworkMod 2.5.1.2
anyone?
Did you ever find a solution to this problem? I just started getting exactly the same. Cant reboot manually into clockwork recovery or from Rom manager :/
If you have flashed a recovery beyond that supported by ROM manager, you will not be able to perform recovery functions from the app (i.e. backup). CW3 is required for CM7 ROMs, but will not be supported by ROM manager until the CM7 RC drops. You can still manually boot to recovery (I always Vol up when powering then select Recovery) and if you have CM7 nightly installed, it has a "reboot to recovery" option in the reboot menu.
You need CWM3 to use CM7.
neronian said:
anyone?
Click to expand...
Click to collapse
Sometimes it is necessary to flash clockwork recovery more than once before it will actually stick. Also, occasionally it will freeze on the splashscreen after a backup, but a battery pull and turning out the phone should be fine.
Sent from my HTC Glacier using XDA App
Here's what's going on:
The Clockworkmod Recovery that you can download from the Market only supports up to CyanogenMod 6.x. For CM7, you need to install Clockworkmod Recovery 3.x, but that version isn't available on the Market yet.
What this means is that you need to find the image file for a CWR 3.x on these forums and manually install it through either a terminal emulator or fastboot. The post below explains how to do it:
http://forum.xda-developers.com/showpost.php?p=10862819&postcount=3
If you flash CM7 using CWR 2.x, your phone won't boot. There's just no way around it.
hammondnav said:
Here's what's going on:
The Clockworkmod Recovery that you can download from the Market only supports up to CyanogenMod 6.x. For CM7, you need to install Clockworkmod Recovery 3.x, but that version isn't available on the Market yet.
What this means is that you need to find the image file for a CWR 3.x on these forums and manually install it through either a terminal emulator or fastboot. The post below explains how to do it:
http://forum.xda-developers.com/showpost.php?p=10862819&postcount=3
If you flash CM7 using CWR 2.x, your phone won't boot. There's just no way around it.
Click to expand...
Click to collapse
Careful with the terminology there. ROM Manager, the app you download from the Market, is a GUI front-end to the CWM recovery image, but you can download and install CWM without using ROM Manager at all. Just because you have ROM Manager installed doesn't mean that CWM recovery is also successfully installed.
TeeJay3800 said:
Careful with the terminology there. ROM Manager, the app you download from the Market, is a GUI front-end to the CWM recovery image, but you can download and install CWM without using ROM Manager at all. Just because you have ROM Manager installed doesn't mean that CWM recovery is also successfully installed.
Click to expand...
Click to collapse
Thanks for pointing that out. I didn't imply that CW ROM Manager and CW Recovery are the same thing though...
hammondnav said:
Thanks for pointing that out. I didn't imply that CW ROM Manager and CW Recovery are the same thing though...
Click to expand...
Click to collapse
You said "the Clockworkmod Recovery that you can download from the Market", and that kinda does. No biggie though.
Just an update for my problem, it turned out that clockwork recovery had corrupted for whatever reason and couldn't be reinstalled from rom manager. As I wanted to test Cm7 anyways I just ended up flashing clockwork recovery 3 manually through fastboot and its all gravy again
Sent from my Desire HD using XDA App
How to flash clockwork recovery from fastboot or fron clockwork recovery 2.51?
Sent from my SGH-T959 using XDA App
Thanks, everyone. What happened with mine, I have no idea, but I randomly opened rom manager and was greeted with an update to the recovery. So I downloaded it and voila - I can now boot into recovery and do backups, etc...
I was running CM7 RC3 fine on my phone, then I decided to switch back to my nandroid backup to stock ( I have done this wil ICed glacier/CM7 RC2/RC1/Royal Ginger etc with no problems). And I have been stuck on the boot splash screen the "Tmobile Mytouch 4g" screen for 20 minutes now without any action... is this a brick? I know I should not worry, but I tried wiping the dalvik cache the acahe and reset to factory setting.... still nothing
How do I go about getting the phone to work?
Thanks
are you running recovery 3.0.0.6? have you tried a battery pull?
Yes, a battery pull was tried, and I am running 3.0.0.5... any help is really appreciated
How do I possibly install 3.0.0.6 now? is it possible?
Thanks
need 3.0.0.6 to run stock or royal glacier. or 2.5.1.2. need to reinstall cm7 and use rom manager to flash recovery. or at least its the eaisest way for me.
follow drews guide and let us know how it goes. http://forum.xda-developers.com/showthread.php?t=944681
unfortunately, I am not being able to go back to royal ginger (its on the toyal ginger splash screen now) I am downloading CM7 RC3 again, but have no way to put it on the sdcard coz I do not have a card reader at this point....... so frustrated.
you can use recovery to mount usb and it will mount the sd card and can tranfer files from computer to card. if you can get to recovery its not bricked. make sure you format boot sys data and cache in mount screen before trying reflash.
Push the cwm 3.0.0.6 recovery image to your phone via adb
Sent from my HTC Glacier using XDA Premium App
Google easy way to get 3.0.0.6 and it should be a zip file u flash in recovery called clockwork_recoveries.zip or something like that. You go into rom manager pick all recoveries and flash 3.0.0.5 and reboot into recovery and it should say 3.0.0.6 now u can flash any rom and restore without getting stuck
Sent from my HTC Glacier using XDA Premium App
Your phone is not bricked. As others have stated, you need to re-flash a gingerbread ROM (like CM7) in order for it to boot.
Best thing to do is install ClockworkMod Recovery version 3.0.0.6 because it can flash both gingerbread and froyo ROMs. You can do this in two ways:
1. Re-flash a Gingerbread ROM. Download TrueBlue_Drew's .zip file from his thread in Development and follow his instructions to be able to flash the included recovery images from ROM Manager.
2. If you have the engineering bootloader (0.85.2007, also some people call it ENG SPL), and if you've set up ADB on your computer, then you can use the fastboot utility to flash recovery images directly to the device. I personally prefer this method. If you can't find instructions to do this, PM me.
Via ROM manager, I updated CWR to 3.0.2.4 from 3.0.0.5. And now, for some reason when i boot into recovery, I'm greeted by the bootloader saying that there is no recovery or boot img. I don't have access to a PC right now, and I've tried installing older CWR versions, still no luck. Anyone have an idea?
Sent from my Nexus S using XDA App
MrSvedberg said:
Via ROM manager, I updated CWR to 3.0.2.4 from 3.0.0.5. And now, for some reason when i boot into recovery, I'm greeted by the bootloader saying that there is no recovery or boot img. I don't have access to a PC right now, and I've tried installing older CWR versions, still no luck. Anyone have an idea?
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
I've had intermittent trouble with ROM Manager properly flashing recoveries. Assuming you have the su binary installed already, you could download the img and then use flash_image from a terminal emulator to flash it manually from the phone itself.
Code:
flash_image recovery /sdcard/recovery.img
flash_image: http://cyanogen-files.carneeki.net/flash_image.zip
CWM: http://mirror1.kanged.net/recoveries/recovery-clockwork-3.0.2.4-crespo.img
Code:
Just flash 3.0.0.5 again and it will be fine.
Sent from my Nexus S using XDA Premium App
One thing that I always have to make sure to do whenever I flash a recovery on the Nexus S via ClockworkMod, is to flash it at least three times. For some reason the first time it never sticks - it takes it quite some time to first download it then try to flash it. The subsequent reflashes are (usually...) fairly quick and don't take longer than a couple of seconds - which is how I know that it's properly flashed them.
So go ahead and flash the newest available recovery for your NS, just do it at least three times.
knytphal said:
One thing that I always have to make sure to do whenever I flash a recovery on the Nexus S via ClockworkMod, is to flash it at least three times. For some reason the first time it never sticks - it takes it quite some time to first download it then try to flash it. The subsequent reflashes are (usually...) fairly quick and don't take longer than a couple of seconds - which is how I know that it's properly flashed them.
So go ahead and flash the newest available recovery for your NS, just do it at least three times.
Click to expand...
Click to collapse
Yup, that did it! Just kept doing it till it worked Thnx!
Sent from my Nexus S using XDA App
Download the latest version of the radio (2.15.00.11.19).
Place the radio file, naming it update.zip, on the root of your SD card.
Power off the HTC Evo 4G.
Boot into the ClockworkMod Recovery, by holding the Volume Down button while powering on.
Once you enter ClockworkMod Recovery, use the side volume buttons to move around, and the power button to select.
Select Install zip from sdcard.
Select Choose zip from sdcard.
Select the radio update.zip.
NOTE: The HTC Evo 4G will reboot during this process.
Once the installation has finished, select Reboot system now. Now the HTC Evo 4G's Baseband version should now be 2.15.00.11.19.
I got the error
"Amend scripting (update-script) is no longer supported.
Amend scripting was deprecated by Google in Android 1.5.
It was necessary to remove it when upgrading to the ClockworkMod 3.0 Gingerbread and based recovery. Please switch to Edify scripting (updater-script and update-binary) to create working update zip packages"
What can i do?
Call me crazy, but doesn't CWM fail at updating radios?? I swear I read that somewhere
Please help need to flash the radio but cant get it work under CWM
You need Amon Ra, which is th first thing everyone should do after they get rooted anyhow.
Click on the link for my guide in my signature.
I have links to Amon Ra, and a walk through on how to flash it, how use it and how to upgrade radios.
I have CWM installed, do i need to uninstall it? or what do i need to do?
No, when you flash Amon Ra, it'll just replace CWM
I got amon recovery installed, flashed the zip radio file it rebooted now its stuck at formatting cache? is there something i did wrong, or wait it out or just reboot and i should be good to go?
HipKat said:
No, when you flash Amon Ra, it'll just replace CWM
Click to expand...
Click to collapse
Do i need to flash the wiimax to for 4g? or i should be good after flashing the radio?
PainKiller89 said:
I got amon recovery installed, flashed the zip radio file it rebooted now its stuck at formatting cache? is there something i did wrong, or wait it out or just reboot and i should be good to go?
Click to expand...
Click to collapse
Just reboot, it should work but check in settings anyways
You don't NEED to flash the wimax, though you may choose to.
I've had a radio flash stick on formatting cache.......... before.
If I remember right, even though the text sticks on the screen, as long as you have options to reboot, it's ready.
Edit: roids beat me.
Sent from my PC36100 using xda premium
When it gets to formatting cache, you may notice the options menu reappears relatively quickly, so you can just reboot
I flashed a few months ago from caulkins thread 2.15.00.12.19. I thought this is newer then the one with 11????????
Sent from my PC36100 using xda premium
aheeejd said:
I flashed a few months ago from caulkins thread 2.15.00.12.19. I thought this is newer then the one with 11????????
Sent from my PC36100 using xda premium
Click to expand...
Click to collapse
It is.
@OP - You should probably make sure you're flashing the latest radios, because the one you're listing goes back to Froyo.
I tried flashing to the latest 12.19 but after installing the zip and restarting it still shows up as 11.19? any reason why? can you guys please give me a link to update my radio to the latest version..
PainKiller89 said:
I tried flashing to the latest 12.19 but after installing the zip and restarting it still shows up as 11.19? any reason why? can you guys please give me a link to update my radio to the latest version..
Click to expand...
Click to collapse
Are you S-ON? If so, you can't flash a radio that way.
If you're S-ON and UNLOCKED, you'll have to do a nandroid of your current setup, flash the latest RUU to update radios, etc., and then re-flash your custom recovery and restore your nandroid.
What version is the latest RUU? Have a link?
Thanks
Sent from my PC36100 using Tapatalk
cremator75 said:
What version is the latest RUU? Have a link?
Thanks
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
The latest RUU version is for Software number 4.67.651.3, and a link can be found in the first "My Links" link in my signature, if you're on a computer or mobile web browser.