hi i cannot fix via odin for some reason never had this problem tried taking out battery and ect. no results plz and ty
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T959UVKA5-REV05-home-mid-CL842336.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Can't open the specified file. (Line: 1813)
<OSM> All threads completed. (succeed 0 / failed 1)
dohandrew said:
hi i cannot fix via odin for some reason never had this problem tried taking out battery and ect. no results plz and ty
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T959UVKA5-REV05-home-mid-CL842336.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Can't open the specified file. (Line: 1813)
<OSM> All threads completed. (succeed 0 / failed 1)[/
What were you running? Did you try reloading Odin and trying again?
Click to expand...
Click to collapse
yes i did a bunch of times i think i was running 2.2 dont remember which rom but it was a team whiskey one for sure but it just bootloops at the team whiskey animation in the beginning
dohandrew said:
yes i did a bunch of times i think i was running 2.2 dont remember which rom but it was a team whiskey one for sure but it just bootloops at the team whiskey animation in the beginning
Click to expand...
Click to collapse
Try Odin back to jfd.
Sent from my SGH-T959 using XDA App
anyone got a link to JFD the vibrant bible link is dead
nm found one
thanks it worked !
Related
Hello,
I tried to do a CF-Auto root and as it was going through the process my phone fell and unhooked the USB cable. Now, the phone is stuck on "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Does anyone know how to get out of this screen or is my phone completely dead?
PLEASE HELP:crying:
titans20 said:
Hello,
I tried to do a CF-Auto root and as it was going through the process my phone fell and unhooked the USB cable. Now, the phone is stuck on "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again."
Does anyone know how to get out of this screen or is my phone completely dead?
PLEASE HELP:crying:
Click to expand...
Click to collapse
Okay, so I just kept trying to get back into the download mode and it eventually worked. However, I am still stuck....Odin failed because "There is no PIT partition"....does anyone know how to fix this?
THANKS!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltespr-jfltespr-sphl720.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
titans20 said:
Okay, so I just kept trying to get back into the download mode and it eventually worked. However, I am still stuck....Odin failed because "There is no PIT partition"....does anyone know how to fix this?
THANKS!
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltespr-jfltespr-sphl720.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I was able to fix the problem. If anyone gets this problem, you need to make sure you are using the stock USB cable. If you use any other brand, it will not work. Hope this helps!
im also having the same issue.
im stuck with cache.img.. anyone can help please..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltespr-jfltespr-sphl720.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> recovery.img
<ID:0/017> NAND Write Start!!
<ID:0/017> cache.img.ext4
Make sure connection on com4 when USB conn.
Sent from my SPH-L720 using xda app-developers app
adhuto said:
im also having the same issue.
im stuck with cache.img.. anyone can help please..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltespr-jfltespr-sphl720.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/017> Odin v.3 engine (ID:17)..
<ID:0/017> File analysis..
<ID:0/017> SetupConnection..
<ID:0/017> Initialzation..
<ID:0/017> Get PIT for mapping..
<ID:0/017> Firmware update start..
<ID:0/017> recovery.img
<ID:0/017> NAND Write Start!!
<ID:0/017> cache.img.ext4
Click to expand...
Click to collapse
Check over here. Also make sure you run CF-Autoroot 'As adminstrator'. Also it doen't matter what COM port as long as it shows up.
hello iam having a bit of trouble trying to get my phone working its currently stuck on firmware upgrade encountered an issue etc etc when i press power button, ive tryed to re flash with ODIN3 about 10 x all failed here the results ...any help please guys.....
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads complet
someone please help
SAMGS4 said:
hello iam having a bit of trouble trying to get my phone working its currently stuck on firmware upgrade encountered an issue etc etc when i press power button, ive tryed to re flash with ODIN3 about 10 x all failed here the results ...any help please guys.....
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads complet
Click to expand...
Click to collapse
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006> Removed!!
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I'd try downloading a new firmware to see if you get the same issue. I've always used a pre-rooted Odin flashable ROM and have had no problems
http://forum.xda-developers.com/showthread.php?t=2250824
I'd make sure your PC has the latest version of the Sammy drivers and Odin before flashing aswell.
Hope this helps.
someone please help
symondo12 said:
i'd try downloading a new firmware to see if you get the same issue. I've always used a pre-rooted odin flashable rom and have had no problems
http://forum.xda-developers.com/showthread.php?t=2250824
i'd make sure your pc has the latest version of the sammy drivers and odin before flashing aswell.
Hope this helps.
Click to expand...
Click to collapse
ive tryed loads roms keeps failing
someone please help
PHONE SEEMS TO DISCONNECT HAS ANYONE ELSE HAD SAME PROBLEM??
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMEA_I9505H3GBME3_I9505XXUBMEA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Removed!!
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
heres the error im geting
Try Odin3-v1.85.exe
Well some reason my gps screwed up. Couldnt get it fixed so decided to just wipe everything and start all over. Unrooted with SU. Did wipe. Now wont go past the first Samsung screen where it shows the lock that is unlocked. Tried to go to odin mode, got there but odin isnt recognizing the phone.
Any ideas?
(I have looked around but nothing came up with my specific problem)
soonerchad said:
Well some reason my gps screwed up. Couldnt get it fixed so decided to just wipe everything and start all over. Unrooted with SU. Did wipe. Now wont go past the first Samsung screen where it shows the lock that is unlocked. Tried to go to odin mode, got there but odin isnt recognizing the phone.
Any ideas?
(I have looked around but nothing came up with my specific problem)
Click to expand...
Click to collapse
Well I got another cable and now it shows up in odin, but fails when I try to run it.
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
soonerchad said:
Well I got another cable and now it shows up in odin, but fails when I try to run it.
<ID:0/004> Added!!
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 1876)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I now see I downloaded MDL instead of MF3. Downloading correct now....
soonerchad said:
I now see I downloaded MDL instead of MF3. Downloading correct now....
Click to expand...
Click to collapse
Right files was the trick. My apologizes have I caused any confusion with this post. Feel free to delete mods.
THANKS FOR THE SITE!!!
hi everybody,
i changed my cyanogenmod 11 in samy deluxe, ilost my imei so to restore iti tried to flash stockbut someting gone wrong. im now in soft brick, i tried toflash again but thats the error:
Code:
[CODE]<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMHB_I9505ITVDMI2_I9505XXUDMHB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Can't open the specified file. (Line: 2564)
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMHB_I9505ITVDMI2_I9505XXUDMHB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Can't open the specified file. (Line: 2564)
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMHB_I9505ITVDMI2_I9505XXUDMHB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUDMHB_I9505ITVDMI2_I9505XXUDMHB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
[/CODE]
i attach whats happen in my phone, i really don't what to do... pease help me....
p.s. i used odin v. 3.04 and 3.07 with the same result, mydevice is gs4 i9505
If you are on the new bootloader you cannot flash those ancient firmwares. You need one based on 4.4.2.
- Different usb port
- Run as admin
- Different usb cable
or just flash the custom recovery and flash a custom rom that you want.
Lennyz1988 said:
If you are on the new bootloader you cannot flash those ancient firmwares. You need one based on 4.4.2.
- Different usb port
- Run as admin
- Different usb cable
or just flash the custom recovery and flash a custom rom that you want.
Click to expand...
Click to collapse
i have to install stock because i dont have efs file....... ive tried what you said..... now i downloaded from sammobile thelatest firmware but i don't know if it will work....
is there a writing protection? is that a problem?
Trinity94 said:
i have to install stock because i dont have efs file....... ive tried what you said..... now i downloaded from sammobile thelatest firmware but i don't know if it will work....
is there a writing protection? is that a problem?
Click to expand...
Click to collapse
No.
i tried to flash autoroot and it works!!!! now i have to restore imei... if i flash stock rom imei will be restored automatically???
Alright so I bricked my s4 while rooting it, It says something happened when updating the firmware, I did what people said use odin and flash to stock but i keep getting the error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> R970CVVUFNC6_R970CCRIFNC6_R970CVVUFNC6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
If anyone could help that would be great!
arkk431 said:
Alright so I bricked my s4 while rooting it, It says something happened when updating the firmware, I did what people said use odin and flash to stock but i keep getting the error
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> R970CVVUFNC6_R970CCRIFNC6_R970CVVUFNC6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
If anyone could help that would be great!
Click to expand...
Click to collapse
Hi,
What stock you had and what stock rom are you trying to flash?
also check this thread
http://forum.xda-developers.com/showthread.php?t=2265477
Its the stock file for the cricket schr970c and that threads for model specific only.
arkk431 said:
Its the stock file for the cricket schr970c and that threads for model specific only.
Click to expand...
Click to collapse
Sorry mate
i did not realice you had an S4 cricket , the thread i gave you is not for your device..