Database Users

[Q] About CM mini RC1

i had just flash this firmware, its running smooth and the only problem is the gsm signal went up and down all the time even im using 2g network only.
i found this firmware has a lot of potential and even the app2sd is there.
can anyone tell me also which system application is safe to remove?

do you have baseband 015?

yes, baseband 015. everything seems ok for now...just the signal bar~

Defy No Data Signal after CM7.1 Stable

Hello All,
I'm one day new to Android, but deep in WinMo (formerly here) and iPhones.
I Rooted using SuperOneClick and all went well.
Installed 2init, all good.
Flashed CM7.1 Stable
Now I have no data service. I went ahead and saw the baseband selector and I selected Argentina, I'm in the Dominican Republic, but it's the same frequencies (850/1900) and nothing.
Please help.
Paul, Android-Newbie

Paul_Days said:
Hello All,
I'm one day new to Android, but deep in WinMo (formerly here) and iPhones.
I Rooted using SuperOneClick and all went well.
Installed 2init, all good.
Flashed CM7.1 Stable
Now I have no data service. I went ahead and saw the baseband selector and I selected Argentina, I'm in the Dominican Republic, but it's the same frequencies (850/1900) and nothing.
Please help.
Paul, Android-Newbie
Click to expand...
Click to collapse
Hello! Sometimes, same frequencies means nothing in Baseband switcher. I think you have to check all the frequencies and options until you find the correct one.
Greetings!

Try all the basebands until it works
Motorola Defy CM7 RC 1.5 OC 1GHz

Tried China ME722 1.10 (850/1900/2100) No Good Either
Australia Telstra 2.26.0 (850/2100) got EDGE, atleast.

I have been trying all of them, and only get EDGE. When I tried Argentina Claro, I got 3G but only for like 5 seconds then the entire signal was lost. Gonna keep searching.

Well, It all Failed No 3G
I even had a live chat with Motorola and they confirmed that my IMEI matches the sticker on my box, the bands are correct for my networks etc, so I guess my only option is to flash my phone back to factory and send the phone for replacement: It's two days old.
Paul

Can Someone link me or tell me how to revert CM7.1 to Original 2.2 firmware that came with my phone? Is there a way from me reading the label on the box to put the original firmware back and even "un-root" the phone?

Paul_Days said:
Can Someone link me or tell me how to revert CM7.1 to Original 2.2 firmware that came with my phone? Is there a way from me reading the label on the box to put the original firmware back and even "un-root" the phone?
Click to expand...
Click to collapse
You have to flash a SBF. It's the only way to have an original firmware again and un-root the phone. You should check this and choose a SBF file. Also, if you are lucky, you can find the original SBF file of your provider on Google.

[Q] GSM Radio Connectivity Problem

Last week I got an unlocked defy from Amazon to use with simplemobile in the US. I activated a sim card and everything worked fine (data, calls, texts).
I made a backup with titanium back up, installed IML74K 4.03 AOKP build28 for Motorola Defy and all went smoothly. However, once it was loaded, I could not connect to the simplemobile network and would only get "emergency calls only"
Tried the baseband switcher v4.0, different frequencies and had no luck. In the attempt of reloading the ROM, could not get the phone to boot past the loading screen. Then I attempted to load a full SBF (T-Mobile_MB525_6.19.0_1FF). This resulted in a black screen, probably due to a version mismatch.
Then I flashed JORDN_U3_6.36.0_SIGNED_USAJRDNTMOB1B4B5DE1028.0R_JORDANTMO_P022_HWp3_Service1FF.sbf, and all worked...except connecting to the network. I still get "emergency calls only". I tried baseband switcher and 3gFixUSA found on these forums to no avail.
Does anyone have any suggestions for what to try to get the radio functioning again?
System version:
Blur_Version.3.6.190.MB525.T-Mobile.en.US
Model Number:
MB525
Firmware version:
2.1-update1
Baseband version:
EPU93ST2_U_03.04.02
Kernel Version:
[email protected] #1
BPflex version:
USAJRDNTMOB1B5DE1028.0R
APflex Version:
GAS_NA_JORDANTMO_P022
Build Number:
JORDN_US_6.19.0

I'm having the same problem on t mobile..... ugh.

I got it. I think.
Nevermind. seen you have used baseband switcher...
Does the baseband switch stick after reboot?
But, theres a 3g fix somewhere here... Try here.. http://forum.xda-developers.com/showthread.php?t=897445
Im not sure if that will help... cheers.

Yeah, I tried that exact 3g fix...is it possible that the radio firmware version is too old/too new/just wrong? Is it different than the baseband?

hollenbeck said:
Yeah, I tried that exact 3g fix...is it possible that the radio firmware version is too old/too new/just wrong? Is it different than the baseband?
Click to expand...
Click to collapse
I'm sure you tried all the basebands that it shows... Hm.. I had the problem until I switched to cm7 honestly.. I know the radio cant be old if it worked before. So. Im not completely sure... Except. Im on Tmobile :c

Interesting...well maybe I should try to install cm7 as well. Is there a specific build that you used? Also, did it work out of the box, so to speak, or did you have to do some more baseband switcher tests?
At this point I'm willing to try to replicate whatever worked for you if you would be willing to share what worked, I would greatly appreciate it

hollenbeck said:
Interesting...well maybe I should try to install cm7 as well. Is there a specific build that you used? Also, did it work out of the box, so to speak, or did you have to do some more baseband switcher tests?
At this point I'm willing to try to replicate whatever worked for you if you would be willing to share what worked, I would greatly appreciate it
Click to expand...
Click to collapse
Its the build by Shawnshine. But I'm.sure the other builds would work.. and yes mine worked out of the box. I just tried all the basebands for tmobile and one finally worked. Plus try playing with the sim card. I got mine completely bone stock. I came from a evo 4g and a 3D. But I wont have this phone for too long I'm getting a HTC one next month but this phone has been good to me.
Sent from my MB525 using xda premium

S5360t roms and radios?

So I own the Telecom NZ version of the Galaxy Y. The only difference this phone has to the other version is that it supports the 850mhz 3G band in conjunction with the standard 2100mhz band.
I have managed to root the stock rom the phone came with (DOKK3 2.3.6), and I wanted to install Creeds Rom 3.5. I wiped the phone, flashed the rom and restarted, but my camera didn't work. I'm now back on stock DOKK3 (lucky I made a backup, because I can't find the original firmware anywhere else).
Is this because of the radio/baseband? It is currently DOKK3. Does it need to be anything specific? Would flashing an international radio disable the 850mhz 3G band?
Thank you for listening to all my questions

ketchup539 said:
So I own the Telecom NZ version of the Galaxy Y. The only difference this phone has to the other version is that it supports the 850mhz 3G band in conjunction with the standard 2100mhz band.
I have managed to root the stock rom the phone came with (DOKK3 2.3.6), and I wanted to install Creeds Rom 3.5. I wiped the phone, flashed the rom and restarted, but my camera didn't work. I'm now back on stock DOKK3 (lucky I made a backup, because I can't find the original firmware anywhere else).
Is this because of the radio/baseband? It is currently DOKK3. Does it need to be anything specific? Would flashing an international radio disable the 850mhz 3G band?
Thank you for listening to all my questions
Click to expand...
Click to collapse
Normally it does not matter what baseband do you flash(thats only my opinion,when im false then sorry).my phone is mixed:the cusrom that im using based on DXLE1 a asia one and my baseband is XXLE1 a german one,the only thing on my phone is the language,its englisch but only the normal settings etc. all apps and etc. are in german and i have never problems.try an version from this thread to test.i think that you have a brandet phone,its a prepaid pack right?
http://forum.xda-developers.com/showthread.php?t=1465800

CALIBAN666 said:
Normally it does not matter what baseband do you flash(thats only my opinion,when im false then sorry).my phone is mixed:the cusrom that im using based on DXLE1 a asia one and my baseband is XXLE1 a german one,the only thing on my phone is the language,its englisch but only the normal settings etc. all apps and etc. are in german and i have never problems.try an version from this thread to test.i think that you have a brandet phone,its a prepaid pack right?
http://forum.xda-developers.com/showthread.php?t=1465800
Click to expand...
Click to collapse
You're from Cologne! How cool. I'll check out that link, and yes, my phone is a prepaid carrier branded one. However I haven't read anything about roms for it because it's only sold in New Zealand and there are probably only like 10,000 of them out there.
Thanks!

Don't suppose you have a flashable version of your DOKK baseband I could download? I made the stupid mistake of flashing my phone with an international version after I bricked it and didn't make a backup. Now it's not showing the XT network anymore.

Telecom Nz Galaxy Y Stock Rom
ketchup539 said:
So I own the Telecom NZ version of the Galaxy Y. The only difference this phone has to the other version is that it supports the 850mhz 3G band in conjunction with the standard 2100mhz band.
I have managed to root the stock rom the phone came with (DOKK3 2.3.6), and I wanted to install Creeds Rom 3.5. I wiped the phone, flashed the rom and restarted, but my camera didn't work. I'm now back on stock DOKK3 (lucky I made a backup, because I can't find the original firmware anywhere else).
Is this because of the radio/baseband? It is currently DOKK3. Does it need to be anything specific? Would flashing an international radio disable the 850mhz 3G band?
Thank you for listening to all my questions
Click to expand...
Click to collapse
Hey Ketchup,
I also have the Telecom NZ galaxy y and have experienced the same issue regarding the camera, and the accelerometer is also out by 90 degrees. However I did not make a backup of the stock rom
Can you please please please upload your copy of the stock rom so that I can download it? It would be very much appreciated as right now my phone is nearly unusable :crying:
Thanks very much
glendinningds

glendinningds said:
Hey Ketchup,
I also have the Telecom NZ galaxy y and have experienced the same issue regarding the camera, and the accelerometer is also out by 90 degrees. However I did not make a backup of the stock rom
Can you please please please upload your copy of the stock rom so that I can download it? It would be very much appreciated as right now my phone is nearly unusable :crying:
Thanks very much
glendinningds
Click to expand...
Click to collapse
Same. How do you solve these?
Sent from my Galaxy Y (S5360T) running Jelly Blast V3

My god, finally a person with my phone who understands, what important wondering is what file controls the autorotation in the roms and can it be replaced with the stocks version?
Sent from my GT-S5360T using xda app-developers app

I gave up on xda's roms that they offer cos they all have the same auto rotation issue... Gaaaaaaahhhhh!!!!!
Sent from my GT-S5360T using xda app-developers app

Starweaver1 emailed me a link to a site where you can download the ODIN files for the original Telecom firmware. There has also been a revised firmware version released in September(?) of 2012 that features an updated lockscreen similar to the galaxy s3's. I might upload it here soon if you guys want.

[Q] Cant make calls when data is on

Hello Everyone
Last week I noticed that I cant make calls via my Nexus 4. I had fully 3G signal but when i tried to call I had "finished call" a sec later. I tried again, again and again... and finnaly I rebooted phone. After that at last I made a call, but since that I still have the same issue from time to time. I noticed that I dont need to reboot phone its enough when I just turn off the data transmission. Anyone have any suggestions?
Thanks in advance.
wally

The usual: What Kernel, what ROM, what radio firmware, which carrier, country if not in US.

Sorry, my bad.
Its a not modified software.
Country: Poland
Carrier: Orange
Kernel: 3.4.0
Build: JDQ39
Baseband: M9615A
Where i can find info about radio version?

wally_m82a1 said:
Where i can find info about radio version?
Click to expand...
Click to collapse
radio is baseband. however you need to be more specific about the m9615a since the important information is in the numbers at the end for the exact version like 1700.48, etc

Its version 2.0.1700.48