[Q] Cant make calls when data is on - Nexus 4 Q&A, Help & Troubleshooting

Hello Everyone
Last week I noticed that I cant make calls via my Nexus 4. I had fully 3G signal but when i tried to call I had "finished call" a sec later. I tried again, again and again... and finnaly I rebooted phone. After that at last I made a call, but since that I still have the same issue from time to time. I noticed that I dont need to reboot phone its enough when I just turn off the data transmission. Anyone have any suggestions?
Thanks in advance.
wally

The usual: What Kernel, what ROM, what radio firmware, which carrier, country if not in US.

Sorry, my bad.
Its a not modified software.
Country: Poland
Carrier: Orange
Kernel: 3.4.0
Build: JDQ39
Baseband: M9615A
Where i can find info about radio version?

wally_m82a1 said:
Where i can find info about radio version?
Click to expand...
Click to collapse
radio is baseband. however you need to be more specific about the m9615a since the important information is in the numbers at the end for the exact version like 1700.48, etc

Its version 2.0.1700.48

Related

[Q] Can't make calls????

I have looked at all of the threads and here goes...
I can't make phone calls. When I do I get a friendly message saying, "connection cannot be made." It seems to me that there is a disconnect with my provider. The provider is Sunrise.
Here are the details on the phone:
It is a Sony Xperia with the latest update 2.1 baseband .54. It is a "branded" phone from Orange Switzerland, but completely unlocked. I checked on the branded by looking at the services numbers.
I then modded the phone, and the phone call problems began. I did wipe everything as per the regular instructions. I upgraded using xrecovery. The phone can connect to Sunrise, and per the services menu it states connected to Sunrise. I can use the Internet connection, thus surf, get email, etc. What I cannot do is make a phone call.
Model: X10i
Android version: 2.2.1
Kernel Version: 2.6.29
Build Number: FreeX10-beta4_zdzihu
When I originally started the device I was asked for a network code and dismissed that dialog. Anything to do with it? And if so how do I get it back?
I want to stress that I wiped the machine clean with factory reset, etc, etc...
christianhgross said:
I have looked at all of the threads and here goes...
I can't make phone calls. When I do I get a friendly message saying, "connection cannot be made." It seems to me that there is a disconnect with my provider. The provider is Sunrise.
Here are the details on the phone:
It is a Sony Xperia with the latest update 2.1 baseband .54. It is a "branded" phone from Orange Switzerland, but completely unlocked. I checked on the branded by looking at the services numbers.
I then modded the phone, and the phone call problems began. I did wipe everything as per the regular instructions. I upgraded using xrecovery. The phone can connect to Sunrise, and per the services menu it states connected to Sunrise. I can use the Internet connection, thus surf, get email, etc. What I cannot do is make a phone call.
Model: X10i
Android version: 2.2.1
Kernel Version: 2.6.29
Build Number: FreeX10-beta4_zdzihu
When I originally started the device I was asked for a network code and dismissed that dialog. Anything to do with it? And if so how do I get it back?
I want to stress that I wiped the machine clean with factory reset, etc, etc...
Click to expand...
Click to collapse
Before Pilot labels this thread as "Another thread in the wrong section", why don't try updating to the latest gingerbread update, instead of staying in freex10 which was abandoned a while back.
The new update has baseband. 71, which by far, is the best baseband for me in Australia, and surely so in Switzerland. Best signal and battery is amazing. Try upgrading to Wolfbreak's official 2.3.3!
Hope this is fixed
Sent from my X10i using XDA Premium App
The problem we have here in Switzerland is that we are about the last in line to get an update. This is why I went down the modding route. It is quite annoying.... Baseband 54 is the latest and greatest baseband in Switzerland for the X10. Sony wants us to buy the ARC... I bought this phone JUST before they introduced the Arc...
Ok which forum should I have been posting this in?
Q&A
sent from my x10 GB! stock and rooted.

[Q] GSM Radio Connectivity Problem

Last week I got an unlocked defy from Amazon to use with simplemobile in the US. I activated a sim card and everything worked fine (data, calls, texts).
I made a backup with titanium back up, installed IML74K 4.03 AOKP build28 for Motorola Defy and all went smoothly. However, once it was loaded, I could not connect to the simplemobile network and would only get "emergency calls only"
Tried the baseband switcher v4.0, different frequencies and had no luck. In the attempt of reloading the ROM, could not get the phone to boot past the loading screen. Then I attempted to load a full SBF (T-Mobile_MB525_6.19.0_1FF). This resulted in a black screen, probably due to a version mismatch.
Then I flashed JORDN_U3_6.36.0_SIGNED_USAJRDNTMOB1B4B5DE1028.0R_JORDANTMO_P022_HWp3_Service1FF.sbf, and all worked...except connecting to the network. I still get "emergency calls only". I tried baseband switcher and 3gFixUSA found on these forums to no avail.
Does anyone have any suggestions for what to try to get the radio functioning again?
System version:
Blur_Version.3.6.190.MB525.T-Mobile.en.US
Model Number:
MB525
Firmware version:
2.1-update1
Baseband version:
EPU93ST2_U_03.04.02
Kernel Version:
[email protected] #1
BPflex version:
USAJRDNTMOB1B5DE1028.0R
APflex Version:
GAS_NA_JORDANTMO_P022
Build Number:
JORDN_US_6.19.0
I'm having the same problem on t mobile..... ugh.
I got it. I think.
Nevermind. seen you have used baseband switcher...
Does the baseband switch stick after reboot?
But, theres a 3g fix somewhere here... Try here.. http://forum.xda-developers.com/showthread.php?t=897445
Im not sure if that will help... cheers.
Yeah, I tried that exact 3g fix...is it possible that the radio firmware version is too old/too new/just wrong? Is it different than the baseband?
hollenbeck said:
Yeah, I tried that exact 3g fix...is it possible that the radio firmware version is too old/too new/just wrong? Is it different than the baseband?
Click to expand...
Click to collapse
I'm sure you tried all the basebands that it shows... Hm.. I had the problem until I switched to cm7 honestly.. I know the radio cant be old if it worked before. So. Im not completely sure... Except. Im on Tmobile :c
Interesting...well maybe I should try to install cm7 as well. Is there a specific build that you used? Also, did it work out of the box, so to speak, or did you have to do some more baseband switcher tests?
At this point I'm willing to try to replicate whatever worked for you if you would be willing to share what worked, I would greatly appreciate it
hollenbeck said:
Interesting...well maybe I should try to install cm7 as well. Is there a specific build that you used? Also, did it work out of the box, so to speak, or did you have to do some more baseband switcher tests?
At this point I'm willing to try to replicate whatever worked for you if you would be willing to share what worked, I would greatly appreciate it
Click to expand...
Click to collapse
Its the build by Shawnshine. But I'm.sure the other builds would work.. and yes mine worked out of the box. I just tried all the basebands for tmobile and one finally worked. Plus try playing with the sim card. I got mine completely bone stock. I came from a evo 4g and a 3D. But I wont have this phone for too long I'm getting a HTC one next month but this phone has been good to me.
Sent from my MB525 using xda premium

lg g2 (d802) mobile data problem.

hello everyone, i have been a long time reader of this amazing site. i really appreciate what everyone does here and the contribution they make. :good:
i have always found solutions for every problem i have ever had with any device, which is amazing and again, thank you very much!
now i come to you with a problem i have encountered after buying my lg g2 from hong kong, and shipping it over to my country, after setting it up and doing all the nice stuff after you get a new device i started noticing a weird issue.
the mobile data seems to be working fine (it says H next to the signal bars) and web browsing is working as well. now when i try to connect my vpn on the device to listen to pandora it doesn't connect, when i try to tether wifi to my friends or to my laptop it doesn't work, even downloading simple mp3 files from various sources doesn't work. BUT downloading apps through the app store is working. although extremely slowly. now all of this happens when i try it on the mobile data, once on wifi everything is lovey dovey and i am a happy camper.
i went to the hidden menu and activated the lte/gsm/wcdma/ auto, and got a new sim card. tried different vpns and tried downloading from different sites, nothing works. i have searched for my particular problem or any variation of it on the threads here and on other site and nothing comes up.
everything is stock.
the devices info are as follows:
model number: LG-D802. android version: 4.2.2 baseband:m897A-AAAANAZM-1.0.190036
kernel version: 3.4.0
build number:JDQ39B software version: D80210b-HKG-XX
please help, i really like this phone and i don't want to have to change. i love it!!
met3b87 said:
hello everyone, i have been a long time reader of this amazing site. i really appreciate what everyone does here and the contribution they make. :good:
i have always found solutions for every problem i have ever had with any device, which is amazing and again, thank you very much!
now i come to you with a problem i have encountered after buying my lg g2 from hong kong, and shipping it over to my country, after setting it up and doing all the nice stuff after you get a new device i started noticing a weird issue.
the mobile data seems to be working fine (it says H next to the signal bars) and web browsing is working as well. now when i try to connect my vpn on the device to listen to pandora it doesn't connect, when i try to tether wifi to my friends or to my laptop it doesn't work, even downloading simple mp3 files from various sources doesn't work. BUT downloading apps through the app store is working. although extremely slowly. now all of this happens when i try it on the mobile data, once on wifi everything is lovey dovey and i am a happy camper.
i went to the hidden menu and activated the lte/gsm/wcdma/ auto, and got a new sim card. tried different vpns and tried downloading from different sites, nothing works. i have searched for my particular problem or any variation of it on the threads here and on other site and nothing comes up.
everything is stock.
the devices info are as follows:
model number: LG-D802. android version: 4.2.2 baseband:m897A-AAAANAZM-1.0.190036
kernel version: 3.4.0
build number:JDQ39B software version: D80210b-HKG-XX
please help, i really like this phone and i don't want to have to change. i love it!!
Click to expand...
Click to collapse
Hello,
Do you find an issue ? I have almost the same problem. I think the problem is un baseband problem but i amn't sure !!!!
which country are you from? I think its got something to do with the firmware version or perhaps the frequency of GSM/LTE is different from where you bought it and where you're actually using it now.
Data connection not working after Kitkat update
Hi! I got a new LG G2 from Dubai through my friend. I am in India. It came with Jelly bean initially and i have updated it to kitkat 2 days before. Till the update the data connection was working fine. But after update it is not working. The data selection is on, but it is not showing any indicator in the notification bar at the top. And also no internet. I tried Airplane mode on and off, reset to factory default, restarting the phone. But nothing works. Can you please give me a solution to get this data connection work? That is the only reason why i bought this smartphone. Now that itself is not working .. Can anybody please help? I have given all the information about my phone below. Thanks!
Phone Model: LG G802
In the Hidden Menu it shows as;
Factory Version: LGD802AT00-V20c-AME-XX-JUN-10_2014
AP App Version: D80220c.1402404754
Software Version Info: D80220c
Firmware Version: 4.4.2
Kernel Version: 3.4.0-perf-gd7db3f1
Baseband Version: M8974A-AAAANAZM-1.0.190084

[Q] - i9507: No service on KitKat - Can receive calls, can't dial (no service)

Hi Guys,
I'm from Australia and recently bought an Optus Galaxy S4 4G. Strangely, the model number is i9507. I double-checked this online and usually weird model numbers are just carrier-spin-offs. So I went ahead to root and flash just like you would with an International i9505.
So far no problems - 4.3.x PA rom works absolutely fine.
BUT:
I've tried some Kit Kat roms recently and they all flash fine but give me 'mobile network not available'. Strangely though, I can receive calls/text and talk on the phone, but when I try to dial or send text messages, I can't do it. My reception bar is completely empty as well.
WiFi is totally fine, just no data and mobile network
I've tried messing with the 'network operators' setting and if i select my carrier (I have a Vodafone sim) I'll get network reception until I turn off the screen and then my mobile network becomes unavailable again
Not sure what the problem is; modem? APN? or roms not suitable for my phone?
Current info:
ROM - [ROM] KOT49H【4.4.2】 GOOGLE EDITION 4.4.2 by Danvdh, Kryten2k35 & Ktoonsez
Baseband - i9507XXUAMH2
Kernel - [email protected]oonsez-VirtualBox #1
I've been flashing for a while now but it's usually just basic stuff so you can probably tell I'm pretty amateur lol.
Any help is greatly appreciated!
Thanks =)
Richard
richard_huang70 said:
they all flash fine but give me 'mobile network not available'. Strangely though, I can receive calls/text and talk on the phone, but when I try to dial or send text messages, I can't do it. My reception bar is completely empty as well.
WiFi is totally fine, just no data and mobile network
...
Current info:
ROM - [ROM] KOT49H【4.4.2】 GOOGLE EDITION 4.4.2 by Danvdh, Kryten2k35 & Ktoonsez
Baseband - i9507XXUAMH2
Kernel - [email protected]oonsez-VirtualBox #1
Click to expand...
Click to collapse
Hi Rich
As your baseband is quite out of sync with the firmware you are trying to run (MH2 is from 4.2.2 ,,, right?) I would suggest you change your baseband (modem) flashing an equivalent to the ROM firmware from here.
I've got yesterday the exactly same behaviour when finally and reluctantly I've added a data plan. I was running a successful low-baseband + high-firmware because was setted to "GSM Only" (try it ... will work flawless). When I've switched to LTE got what you've described in the face too . I've promptly updated my baseband and now all is fine :angel:
EDIT: please do nothing of the above described BEFORE taking a EFS backup with every tool you can find and preserving them in several highly fortified locations and 2 or 3 K7 Tapes too . Have an ODIN flashable copy of your MH2 baseband is advisable too.
Hope I've helped and please share your experience.
Nice regards.
.
Hey thanks for the reply! Helps heaps =)
While I still had those roms installed I did try flash a few modems within Odin, all failed though =S
Which one should I be flashing?
I believe I tried XXUFNA1 but the flash just doesn't go through
Does it make a difference which rom I flash the new modem from? I.e. flash when the new modem now or flash the new modem on the kitkat rom?
I'm currently using Pacman 4.3.1 since it's perfectly fine. Just can't wait to get on a KitKat rom though! haha
richard_huang70 said:
Hey thanks for the reply! Helps heaps =)
While I still had those roms installed I did try flash a few modems within Odin, all failed though =S
Which one should I be flashing?
I believe I tried XXUFNA1 but the flash just doesn't go through
Does it make a difference which rom I flash the new modem from? I.e. flash when the new modem now or flash the new modem on the kitkat rom?
I'm currently using Pacman 4.3.1 since it's perfectly fine. Just can't wait to get on a KitKat rom though! haha
Click to expand...
Click to collapse
Hi Rich
Sorry, may be my fault, but quite didn't got your
You may proceed having the below as a rule of thumb:
Your baseband (modem) version should always match your ROM (firmware) version.
Failure to flash something is never good signal. As you have an i9507 (I own the 5) is very advisable to flash a modem built for your S4 flavour.
The above rule should apply to it too so, if the only modem available for the i9507 is the MH2 your firmware have to match or these issues reported will return.
Did you tested the "GSM Only" option to corroborate (or not) my hyphothesis? With this config, you should perceive no signal drops when waked. I know it isn't a viable operational mode but ... just for fun
Nice regards and keep sharing :laugh:
.

[Q] New N900 has bad signal and "your device has been modified" update error

[Q] New N900 has bad signal and "your device has been modified" update error
Hello forum,
I am in the UK using a Virgin sim and my girlfriend bought this phone new in china and flew it over to me. At the moment the signal is really bad wherever I go (the same SIM card in my old galaxy nexus had great signal in all these places) so I was wondering if there was any way to make the signal better?
Also I tried to do an update through the settings menu hoping this would sort out the signal problem and it is giving me the "your device has been modified. no updates available for this device." error even though the phone is new.
the information about the device is as follows:
when I type *#1234# I get:
AP: N900ZSUBMI5
CP:N900XXUBMI2
CSC:N900OZSBMI2
In my "about device" within settings, the following is given:
Model number: SM-N900
Android version: 4.3
Baseband version: N900XXUBMI2
Kernel version: 3.4.39-1625296
[email protected]#1
Wed Sep 11 19:49:31 KST 2013
Build number: JSS15J.N900ZSUBMI5
SELinux status: Enforcing
If I reboot to recover it opens:
CWM-based Recovery v6.0.4.5
Compiled by Xiaolu(20131121)
When I try to check knox I cant see it (I go into odin mode and the top left just says the following):
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
(I now understand the N900 doesn't have knox)
Thanks for looking, any feedback at all would be much appreciated :good:
Saml91 said:
Hello forum,
I am in the UK using a Virgin sim and my girlfriend bought this phone new in china and flew it over to me. At the moment the signal is really bad wherever I go (the same SIM card in my old galaxy nexus had great signal in all these places) so I was wondering if there was any way to make the signal better?
Also I tried to do an update through the settings menu hoping this would sort out the signal problem and it is giving me the "your device has been modified. no updates available for this device." error even though the phone is new.
the information about the device is as follows:
when I type *#1234# I get:
AP: N900ZSUBMI5
CP:N900XXUBMI2
CSC:N900OZSBMI2
In my "about device" within settings, the following is given:
Model number: SM-N900
Android version: 4.3
Baseband version: N900XXUBMI2
Kernel version: 3.4.39-1625296
[email protected]#1
Wed Sep 11 19:49:31 KST 2013
Build number: JSS15J.N900ZSUBMI5
SELinux status: Enforcing
If I reboot to recover it opens:
CWM-based Recovery v6.0.4.5
Compiled by Xiaolu(20131121)
When I try to check knox I cant see it (I go into odin mode and the top left just says the following):
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
(I now understand the N900 doesn't have knox)
Thanks for looking, any feedback at all would be much appreciated :good:
Click to expand...
Click to collapse
Well it looks great. At least I can be sure that your phone shouldn't be a fake. It is of Hong Kong or Taiwan origin, Exynos, running 4.3 on N900ZSUBMI5.
You have CWM Recovery, Xiaolu's port of it. Hence that device was probably rooted prior to getting it handed over to your girlfriend. KNOX is only present on the MJ and onward firmwares, and you happen to be on an MI firmware so you don't have it activated yet.
Check the section for Network/Bearer and Wireless Connectivity on this link: http://www.samsung.com/levant/consumer/mobile-phones/mobile-phones/galaxy-note/SM-N9000ZKEXSG-spec
Match it up with your country's network specifications. There's a reason why these phones don't get sold worldwide, as they aren't all compatible with every region. Also remember to set correct APN values for your country.
nicholaschum said:
Well it looks great. At least I can be sure that your phone shouldn't be a fake. It is of Hong Kong or Taiwan origin, Exynos, running 4.3 on N900ZSUBMI5.
You have CWM Recovery, Xiaolu's port of it. Hence that device was probably rooted prior to getting it handed over to your girlfriend. KNOX is only present on the MJ and onward firmwares, and you happen to be on an MI firmware so you don't have it activated yet.
Check the section for Network/Bearer and Wireless Connectivity on this link:
Match it up with your country's network specifications. There's a reason why these phones don't get sold worldwide, as they aren't all compatible with every region. Also remember to set correct APN values for your country.
Click to expand...
Click to collapse
okay thanks for your reply, I believe the frequencies virgin use are 1800MHz and 2100MHz which can both be used with this phone. The APN settings were downloaded automatically when the phone was first booted and I also manually checked them and they are correct.
Saml91 said:
okay thanks for your reply, I believe the frequencies virgin use are 1800MHz and 2100MHz which can both be used with this phone. The APN settings were downloaded automatically when the phone was first booted and I also manually checked them and they are correct.
Click to expand...
Click to collapse
What is your network switch options in Settings?
Do you have it to HSPA/GSM (auto connect) set? [Sorry if it's not exactly the same, I don't have the N900 model]
My friend pointed this out to me just before I saw your message, the options available are only wcdma/gsm hspa isn't an option. Im guessing from my limited knowledge that this is the problem, what is it I would need to do to fix this? thanks again.
Saml91 said:
My friend pointed this out to me just before I saw your message, the options available are only wcdma/gsm hspa isn't an option. Im guessing from my limited knowledge that this is the problem, what is it I would need to do to fix this? thanks again.
Click to expand...
Click to collapse
Actually, I asked my friend who has the N900, he's reporting the same as you. So no problem in that.
There must be something else that can be isolated to find what's going on. You can try to upgrade the phone to the latest modem by flashing the latest 4.4.2 ROM.
Okay, what would be the best way to flash the latest ROM? Would this be a custom ROM or is there a way to get the official one? Thanks again.
Edit: I have now tried putting Dr Ketans rom on it, telling it to use the ROMs modem, and that still didnt fix the problem. I have also tried flashing some other modems from the GSM modems collection thread but the problems persist. The symptoms are as follows:
Frequently looses signal
only ever shows the E or G symbol for mobile internet connection (whereas on my other phone with the same sim it instantly gets full signal and shows H+ or 3G)
the phone has also never been able to lock onto a GPS location it only ever shows searching for GPS in the notifications bar.

Categories

Resources