i had just flash this firmware, its running smooth and the only problem is the gsm signal went up and down all the time even im using 2g network only.
i found this firmware has a lot of potential and even the app2sd is there.
can anyone tell me also which system application is safe to remove?
do you have baseband 015?
yes, baseband 015. everything seems ok for now...just the signal bar~
Related
Sorry for my english
I have a problem.
I was on this rom
http://forum.xda-developers.com/showthread.php?t=2044797
after all i flashed this one
http://forum.xda-developers.com/showthread.php?t=2192807
but i didnt like it and i came back to negan rom.
(Yes, I did full wipe)
Now i habe problem with 2g and 3G internet.
Google play and browser detect no internet, but i can log into my google account.
My chat (Gadu-Gadu) works fine...
I tryed to go back to stock rom, and root, instal 2ndboot, and flash one more time negan Rom.
Problem is still there.
what i can do?
Checked baseband to match your region already?
Was it working before? Doesn't seem like a baseband issue.
Sent from my MB526 using xda premium
3G do not work
i've a similar problem with the last nightly:
Every think working fine except the 3G reception only.
I've try to change the base hand configurations but the problem still there.
Wi-fi working fine
Sms OK
Gsm seems OK
Just the 3G
Any suggestion?
Tnks
(i have a Brazilian network "vivo")
base band selection
kindly suggest base band selection for mb 526 ....having network problem with my moto defy plus after installation of cm 10
so.. I have this phone parked in my drawer for almost a month and finally decided to seek for online help.
Last rom installed is cm7 (but i've tryed several others cm7.2 cm9 cm10 cm10.1). I've tryed using both the baseband switcher included in the rom settings (where avaiable) and the standalone apk. I live in Italy so I chose Italy in the baseband selection (again.. I've tryed several others basebands just in case...). The sim card is a working VodafoneIT sim card and it is recognized by the phone.
the problem is that my phone does not lock to any network and I see the message "emergency calls only".
I also tryed to flash original sbf from here.
I don't know if it matters but logcat reports these errors:
Code:
E/GSM ( 6427): RIL implementation has returned an error where it must succeedcom.android.internal.telephony.CommandExcep tion: GENERIC_FAILURE
D/RILSWITCH( 2018): RILD unknown at cell -1
E/GSM ( 6427): Wrong network type: 0
I remember that at the time of when the problem showed up the first time, looking on the internet, in addition to the advice of changing the baseband, I found a thread where someone was talking about a possible hardware fail.. but I can't find it anymore.
any suggestion?
thanks
up????
i'm also having this problem
anyone found the fix?
Does the same error occur in stock? If so then I think it's a hardware issue. You could try a different sbf of your carrier and region(a newer one), but I do not think it would help much.
Sent from my MB526 using Tapatalk 2
I have the same problem: no 3G data, no baseband (baseband unknow), no matter what I do.
The stock ROM woks fine, but the last CM10 (30/oct/13) dont work
romanoqz said:
I have the same problem: no 3G data, no baseband (baseband unknow), no matter what I do.
The stock ROM woks fine, but the last CM10 (30/oct/13) dont work
Click to expand...
Click to collapse
Try with different bands from your country or another country with the same frequencies.
Pull the batery out for a few seconds.
Use the latest version of the standard app (not defy parts).
Regards,
It works for me with a different company of my country
My chip is Personal_AR and with this don't work, but with Claro_Ar works fine...
THX it's make me crazy
ok here it is. i've flashed various roms but don't really know what everything is, i just followed all those insturctions but never bricked my device..
I live in China, use 3g mobile internet, my phone is korean note2(shv-e250l), use slimkat 4.4.2 nightly, bandwidth MI1, kernel thor 2.9.
i've been using these for about 1 month, and there was not any big problems, except that it feels like my signal strength or internet speed isn't as good as stock rom
but yesterday, when I hung up after calling my friend, all of sudden my phone can't read my sim card, so i reboot the device, and my mobile network doesn't work, and i reboot again, finally everything works.
after that, everytime i call someone my phone goes stupid and i have to reboot it twice.
and I started to wonder, does my bandwidth need to be updated? can I use newest stock rom's bandwidth?
newest stock rom of korean note2 is NA1, will using its bandwidth solve my problem?
if it does the magic, how do i apply bandwidth of NA1 to my phone?
HELP ME.............
Hi.
After updating Danvh's lolipop-rom to the latest version, I lost my signal and wifi. When I force my phone to use 2G (GSM only) in network-settings, everyting works normal.
But of cource I want the speed of 3G and 4G when using internet!
Sometimes (not often) 3G works.
Sometimes the phone says it has signal, but calls, internett etc don't work
I tried to flash the latest modem (XXUHOC6), but no luck. Have also tried modem XXUGNK4, XXUHOB8 and XXUHOB7. I tried to go back to the older version of the custom rom, but no luck
I have now downloaded the latest official stock rom from sammobile. But same problem with stock rom.
Any suggestions?
I have IMEI
Sorry, I have the same problem and I am still searching for a solution. And I have been trying everything as you and no solution. Sometimes I think is a hardware issue.
Very frustrating :S
Hope to find a solution soon.
I dont want to buy a new phone yet. There is no other phones out there that I want
I recently upgraded to GoldenEye 53.
Ever since installing this ROM I seem to be having issues with LTE reception. It's not as consistent as it used to be. Sometimes I won't be able to get data, and then if I turn mobile data off and on again using the control panel, it will start working again.
My baseband version is i337ucug0c3 in case that matters.
Any ideas?
I have the exact same issue...... thinknig of updating Baseband to NJ4 as that seems to be one that alot of people are using!