Related
My motorola bravo was being updated when it became a brick. The phone comes on and puts a red M and there does not advance. You can not do the recovery. I need an idea of how to revive it. And try to install but nothing happens sbf reposition the M and there does not happen.
comeranas said:
My motorola bravo was being updated when it became a brick. The phone comes on and puts a red M and there does not advance. You can not do the recovery. I need an idea of how to revive it. And try to install but nothing happens sbf reposition the M and there does not happen.
Click to expand...
Click to collapse
did you boot into bootloader (by holding power + volume up) and then apply the sbf?
and remove your battery and reinstall it.
If I've done both and what comes out is only the red M
comeranas said:
If I've done both and what comes out is only the red M
Click to expand...
Click to collapse
your not holding the vol up earlier enough do the following:
1) take out the battery
2) press and hold down the vol up button
3) w/o releasing rhe vol up button, put the battery in.
4) within 3 seconds a black screen will come up with white text.
5) do the sbf
i have bricked the bravo so hard during development and always been able to get to a bootloader screen. one time i bricked so hard it went directly to the bootloader, so you def. can get in to sbf, unless you vol rocker is broken, then you may be screwed. in that case plug int he phone, let it bootloop and try to start the sbf, it might reboto into bootloader for you, but probably not.
bandroidx said:
your not holding the vol up earlier enough do the following:
1) take out the battery
2) press and hold down the vol up button
3) w/o releasing rhe vol up button, put the battery in.
4) within 3 seconds a black screen will come up with white text.
5) do the sbf
i have bricked the bravo so hard during development and always been able to get to a bootloader screen. one time i bricked so hard it went directly to the bootloader, so you def. can get in to sbf, unless you vol rocker is broken, then you may be screwed. in that case plug int he phone, let it bootloop and try to start the sbf, it might reboto into bootloader for you, but probably not.
Click to expand...
Click to collapse
I manage to load the bootloader and the sbf but when the phone is restarted only relocate the white with red M
comeranas said:
I manage to load the bootloader and the sbf but when the phone is restarted only relocate the white with red M
Click to expand...
Click to collapse
so then you should reboot holding vol down and then the recovety will load.
hit vol up and vol down at the same time to load options.
then wipe cache and wipe data.
wiping data is prob only way u can fix it if you already successfully flashed the sbf.
bandroidx said:
so then you should reboot holding vol down and then the recovety will load.
hit vol up and vol down at the same time to load options.
then wipe cache and wipe data.
wiping data is prob only way u can fix it if you already successfully flashed the sbf.
Click to expand...
Click to collapse
Thanks for the help.
perform the sbf file down twice again but the phone only puts the M, will not let me enter recovery, I think it is a complete brick and not know what else to do.
Too bad there is no sbf2.1 for testing.
hmmm, unless you are going straight to a bootloader screen you should still be able to enter recovery. my only guess is the update was in the middle of updating your recovery when something went wrong and the recovery image is corrupt.
sbf not working plus no access to recovery sounds like a real true brick possibly.
make sure you hold down the vol down and w/o letting go you put the battery in, when you are in this bootloop that is the only way to be sure you get in to recovery.
what happens when you hold down vol down and put the battery in? does it do anything different at all?
bandroidx said:
hmmm, unless you are going straight to a bootloader screen you should still be able to enter recovery. my only guess is the update was in the middle of updating your recovery when something went wrong and the recovery image is corrupt.
sbf not working plus no access to recovery sounds like a real true brick possibly.
make sure you hold down the vol down and w/o letting go you put the battery in, when you are in this bootloop that is the only way to be sure you get in to recovery.
what happens when you hold down vol down and put the battery in? does it do anything different at all?
Click to expand...
Click to collapse
The phone was damaged because it was downloaded in the middle of an upgrade.
when I hold the power and volume down, I put the battery and three seconds later reappears M, does not load the recovery.
I think I'm going to give up.
May be taking it to a store at & t service, can do something?
Take it to the at&t store. Since it is so badly damaged due to the update "failing" they can replace it with warranty
Sent from my X10i TripNMiUI using XDA Premium App
I'm a rep @ an AT&T corporate location. Yea, if that update failed, we take care of it. I assume you're referring to the OTA 2.2.
Reviving an old thread as where comeranas left off is where I am at.
Wife has a new phone already so I am just trying to revive this one. If not, it goes into garbage.
The screen has been powering up to the Motorola logo only. I can hold the volume up and power button to get to the bootloader/usb screen.
I cannot get to the recovery screen by holding the volume down and power button. No matter how many times I try and in what combination, it always powers up to the Motorola logo.
I ran the sbf file on it twice with RSD Lite and each time when it gets to the part of re-booting it says "Phone is being rebooted."
Then after the progress gets to a 100%, it says, "Please manually power up this phone."
The Motorola logo is on the screen and I have tried to simply push the power button, pull the battery and re-insert it and pull the battery, hold the volume button down and re-insert the battery all while still hooked up to the computer.
After a few minutes the Results box says Passed. But the phone still goes no further than the Motorola logo.
So as of now, the phone still only powers up to the Motorola logo and goes no further.
Naturally it had to start acting up 2 weeks out of warranty. Dang blang warranty timers installed in these phones. lol!
You can try sbf_flash on Linux and both the full and fixed sbf with it. I'm on phone now, so I can't give good instructions or links, but sbf_flash is around in one of the recovery threads here, and the fixed sbf is at quarx2k.ru and my rom mirror (see signature).
If you need it, I can make a Linux Live tutorial for sbf flash, only requirement would be 512mb usb stick or memory card.
I once had to flash sbf 3 times in a row to fix a brick from an accidental Defy kernel flash in cwm.
So the sbf files you are referring to are different than the 2.2.1 sbf file HERE?
I don't run Linux on my comp.
I'll look at the fixed sbf file in your sig. Maybe I just need to run it over and over again until the phone pops. lol! Thanks.
FirePro911 said:
So the sbf files you are referring to are different than the 2.2.1 sbf file HERE?
I don't run Linux on my comp.
I'll look at the fixed sbf file in your sig. Maybe I just need to run it over and over again until the phone pops. lol! Thanks.
Click to expand...
Click to collapse
The fixed sbf contains the bootloader and kernel and it for when you write to either of them and need to reflash back to stock. Handy for when you accidentally flash a Defy from with a boot.img
You don't have to install linux, just use a Live CD and place sbf_flash and the sbf files on a memory stick. Once the Live CD boots, the memory stick should be on the desktop. Open the folder and right click "Open Terminal Here". In the terminal first type:
su
then
chmod 0777 ./sbf_flash
then
./sbf_flash ./fixed_bravo_sbf.sbf
or
./sbf_flash ./p4_kobe_umts_kobe_user_3.4.2-125_KOB_FFW-4_product-keys-ATT-US_ATT-signed.sbf
Just download one of these for your pc's architecture, if you're unsure, then any of the 32-bits will work.
http://www.linuxmint.com/download.php
The reason I suggest using sbf_flash and Linux is that its supposed to fix phones that sbf flashing with RDS Lite won't fix, and it'll flash files that RDS won't like modded root sbfs. Apparently it flashes differently. Don't ask me the difference cause I don't know.
Good Luck.
You said that you couldn't get to the Stock recovery menu, your volume button isn't broke is it? And have you tried up+power and down+power? Kicking it? JK, but throwing my old razr flip phone into the couch as hard as I could used to fix it....it would freeze on boot, but a good toss and it was good as new.
Thanks, gonna give it a try.
I am kinda wondering at this point if the down volume is broke. Though if it was, she would have said something about it before it went down.
I did smack it a few times to no avail. lol!
hi i have flashed cm902 rom it booted up but it dont like me cause makes eroros so i wanted ro reflash with old stock 2,3,3 and with recovery bootstrap i thinked what i wild came into recovery but it just hanged and now no recovery only white triangle with yelow! and only logo m, so maybe someone hav this problem earlier and can help me?cause now im searching half day of work for searching for solution.
thanks fo anny help
Dont worry. Do this. First use the wall charger and charge your phone for at least 30mins. So if your phone is off then it will charge till 70-80%. Check if it is charging by looking at the micro-usb port lighting up.
Now go to the White triangle with ! mark. Then press @ button. You will get options. Select erase data by pressing volume button and then clicking enter button on your keypad.
After the wipe has been done pull out battery. Then start RSD Lite on your computer. Put the battery to your phone. Now press both volume up and volume down together and then power button for 2secs. Leave power button. You will see it in bootloader.
Now load sbf file on RSD software and wait for it to recognize your phone. Then click start. Thats it. Your phone should be ok.
Hi guys, i have a big problem, i have studied all things, but im stucked. I have Defy red lens, all started when the phone was working bad, giving all time boxes to close apps, so i decided to backup all things with titanium backup and restore all thru the phone, but when it finish, the phone become worse, i cant do nothing, i tried to install a lot of sbf's no one work, i opened the housing of the phone to rollback the software to charge the battery touching the inside battery with the poles so i can charge all time and try try try, doing that i dont need to buy another charger or similar phone from another one, i tried to repair with a technician, no way... they told me 2 differents its the plaque, i should change. but i wont stop there, i need your help, i want to get back my phone working 100%.
the more information that i can give you. i tryed to put only froyo sbfs, if no work i roll back to this version:
PERSONAL
imai: 354713040971129
imai SV: 3547130409711228
version: 34.4.707.mb525.personal.en.ar
n° revision: 2
modelo: mb525
version : 2.2.1
N° Version: 3.4.2-107_jdnl-7
When i want to wipe data or something, told me "E:Can´t mount CACHE:recovery/log"
when i try to flash, cheksums 32 and more 8-10 around chksums
i hope i can solve that,
thanks in advance
first of all do you have root your divece if yes go to recovery and wipe cashe/user data and davlik
if not flash your original if it was working fine and after flashing restart your device doing this "Hold down the VOL- button without leaving it push the power buton and hold them until you see a triagle with the android robot then leave this 2 buttons and press TOGETHER (Vol-)+(vol+) and leave it there you find options choose the clean case option by vol- and press power buton let finish then chose reboot option by press vol+ and power button and you are OK
1sokel said:
first of all do you have root your divece if yes go to recovery and wipe cashe/user data and davlik
if not flash your original if it was working fine and after flashing restart your device doing this "Hold down the VOL- button without leaving it push the power buton and hold them until you see a triagle with the android robot then leave this 2 buttons and press TOGETHER (Vol-)+(vol+) and leave it there you find options choose the clean case option by vol- and press power buton let finish then chose reboot option by press vol+ and power button and you are OK
Click to expand...
Click to collapse
i did all, nothing work... when the phone reboot all will be cleaned, cant install nothing. I wipe davlik with titanium backup but theres nothing to wipe say,
anyone can help me please?
c0fler said:
anyone can help me please?
Click to expand...
Click to collapse
Try McGyver charging again.
hotdog125 said:
Try McGyver charging again.
Click to expand...
Click to collapse
is charged.
Ummmm.. Something it's wrong , what BL you got ?
Hello,
I'm on LG G2 Stock Rom on Kit Kat (4.4.2). The phone is rooted but no custom recovery as I just need "root" to run Titanium backup.
Yesterday, I attempted to update the 1 XML file to increase speaker volume. Upon restart the phone will stuck on LG logo and does nothing.
I can access download mode. So now, i'm downloading LG Flash Tool and KDZ file for my phone to flash all back to stock.
The question is now: how do I turn off the phone? Pressing power button will simply restart the phone - it never goes to off.
Another question: if I don't install any custom recovery, is there any stock recovery installed? When I attempted to go to recovery (by pressing volume down + power method), I was presented with Factory reset questions. I clicked OK twice and then Android logo appears (it seems like it's attempting to really do a factory reset) and then phone reboots.
If I can go to stock recovery, I hope I can access the storage inside and redo what I did yesterday.
Anyone can help? Or share some knowledge?
Thanks
The latest software upgrade was installed by using LGMobile support tool. I'm back to stock and finish with ioRoot.
Now, going to use AutoRec to install recovery (better to have custom now, so if this happens again, I have a way to access my phone data).
No answers given but it's no longer urgent now. Still if anyone found a way to off the phone when boot looping other than waiting for battery to run dry, by all means, please reply the thread.
Thanks.
poundesville said:
The latest software upgrade was installed by using LGMobile support tool. I'm back to stock and finish with ioRoot.
Now, going to use AutoRec to install recovery (better to have custom now, so if this happens again, I have a way to access my phone data).
No answers given but it's no longer urgent now. Still if anyone found a way to off the phone when boot looping other than waiting for battery to run dry, by all means, please reply the thread.
Thanks.
Click to expand...
Click to collapse
Unplug the USB cable if it's plugged.
Hold power button for like 30 seconds straight.
To turn off phone ,just push volume down and power button same time for like 7-10 sec, it will be like restart , but keep them pressed until screen shuts off again (it will take less then 1 sec). Thats all
username4this said:
Unplug the USB cable if it's plugged.
Hold power button for like 30 seconds straight.
Click to expand...
Click to collapse
I didn't time 30 seconds, but I did press power button for a long time. Is this method for when you can use the phone? Mine is during boot loop.
jkjambo said:
To turn off phone ,just push volume down and power button same time for like 7-10 sec, it will be like restart , but keep them pressed until screen shuts off again (it will take less then 1 sec). Thats all
Click to expand...
Click to collapse
I can't say for sure now, since I have my phone backed-on. But I sort of press these buttons for a long time at the beginning (when I wasn't really sure how to go to recovery mode). But good to know about this - (for next time ).
thanks both!
Only method i know to completely shut down phone in any situation is what i already wrote in last post.
jkjambo said:
Only method i know to completely shut down phone in any situation is what i already wrote in last post.
Click to expand...
Click to collapse
Agreed.
it happen to me too when I try to install MIUI ROM.
Pull off USB cable and long press power the power button
Thanks. I'll remember this, if I got unlucky and stuck in booth loops.
For now, I installed recovery, so hopefully if this happens, I can still access my internal folder and do the require changes.
Hi,
I thought I could enter the Hidden Menu and change the Fast Dormancy setting into disabled, so I did it and wanted to reboot my phone. The phone turned off, and was doing its boot up procedure, while it started behaving abnormally. The LG logo popped up for about 5 seconds (so it didn't leave the bootloader), turned off for 10 seconds and then again the whole process repeated. I thought that was a bootloop, so I turned it off, entered Factory Reset menu, chose appropriate options and waited for the reset, but the phone didn't perform the action. Then I tried to get into download mode, but to no avail - the phone kept going with bootloop. I'm still struggling to do this; the only menu I could get into was the Factory Reset one.
Could anyone help me get my phone back into function?
D802, 20G stock
Thanks in advance!
That's weird. I always disable fast dormancy after a reset or a new rom flash and I've never had any issues.
What comes instead of download mode? If nothing, Are you sure you're doing it correctly?
Press and hold the power button for 10-15 seconds.
Plug the phone into the cable, then press and hold volume up and plug the cable into the computer. That should trigger download mode.
Thank you for your help.
I know that's weird, I've entered Download mode numerous times using the combination that you provided and can't do it this time. The strangest thing actually is that the factory reset menu does show up (though it does nothing), while Download mode does not - it seems to be actually unaffected by using the combination and is still stuck in a bootloop. I have no idea what steps should I take in order to recover my phone.
I forgot to mention that the phone wasn't even rooted then, which makes it even more mysterious...
Ouch! Well what comes up when you enter download mode? Fastboot? Black screen?
If you're still covered by warranty take it for a replacement. I doubt fast dormancy alone has messed up your device. If it truly has, then try booting the phone without a sim card.
Normally when I insert the USB cable with vol up button pressed, the LG logo shows up, then the notification of Download mode and finally the Software Update screen. But this time, only the LG logo shows for about 5 seconds, as if I normally booted it using Power button and does not get me into neither Download nor Fastboot mode.
Well, I took a look at other options in this hidden menu, but still, could it brick that hard even then?
I doubt whether I'm still eligible for a replacement, as the device had been rooted already (though it's not at the moment). The whole process also takes quite a lot of time, which is why I wanted to avoid it. Is there any method to bring it back to life?
I wanted to revive my phone using the method linked with flashing the whole partitions onto my phone, but Ubuntu didn't even notice that any drive was connected...
Am I doing something wrong? I mean e.g. is the combo Vol Up + cable still the same in D80220G? Is there any other way of accessing the phone through my computer? Can I somehow stop this bootloop from continuously happening? Doesn't the fact that I can get into Factory Reset menu help in any way?
Thanks for your help in adavnce!