My motorola bravo was being updated when it became a brick. The phone comes on and puts a red M and there does not advance. You can not do the recovery. I need an idea of how to revive it. And try to install but nothing happens sbf reposition the M and there does not happen.
comeranas said:
My motorola bravo was being updated when it became a brick. The phone comes on and puts a red M and there does not advance. You can not do the recovery. I need an idea of how to revive it. And try to install but nothing happens sbf reposition the M and there does not happen.
Click to expand...
Click to collapse
did you boot into bootloader (by holding power + volume up) and then apply the sbf?
and remove your battery and reinstall it.
If I've done both and what comes out is only the red M
comeranas said:
If I've done both and what comes out is only the red M
Click to expand...
Click to collapse
your not holding the vol up earlier enough do the following:
1) take out the battery
2) press and hold down the vol up button
3) w/o releasing rhe vol up button, put the battery in.
4) within 3 seconds a black screen will come up with white text.
5) do the sbf
i have bricked the bravo so hard during development and always been able to get to a bootloader screen. one time i bricked so hard it went directly to the bootloader, so you def. can get in to sbf, unless you vol rocker is broken, then you may be screwed. in that case plug int he phone, let it bootloop and try to start the sbf, it might reboto into bootloader for you, but probably not.
bandroidx said:
your not holding the vol up earlier enough do the following:
1) take out the battery
2) press and hold down the vol up button
3) w/o releasing rhe vol up button, put the battery in.
4) within 3 seconds a black screen will come up with white text.
5) do the sbf
i have bricked the bravo so hard during development and always been able to get to a bootloader screen. one time i bricked so hard it went directly to the bootloader, so you def. can get in to sbf, unless you vol rocker is broken, then you may be screwed. in that case plug int he phone, let it bootloop and try to start the sbf, it might reboto into bootloader for you, but probably not.
Click to expand...
Click to collapse
I manage to load the bootloader and the sbf but when the phone is restarted only relocate the white with red M
comeranas said:
I manage to load the bootloader and the sbf but when the phone is restarted only relocate the white with red M
Click to expand...
Click to collapse
so then you should reboot holding vol down and then the recovety will load.
hit vol up and vol down at the same time to load options.
then wipe cache and wipe data.
wiping data is prob only way u can fix it if you already successfully flashed the sbf.
bandroidx said:
so then you should reboot holding vol down and then the recovety will load.
hit vol up and vol down at the same time to load options.
then wipe cache and wipe data.
wiping data is prob only way u can fix it if you already successfully flashed the sbf.
Click to expand...
Click to collapse
Thanks for the help.
perform the sbf file down twice again but the phone only puts the M, will not let me enter recovery, I think it is a complete brick and not know what else to do.
Too bad there is no sbf2.1 for testing.
hmmm, unless you are going straight to a bootloader screen you should still be able to enter recovery. my only guess is the update was in the middle of updating your recovery when something went wrong and the recovery image is corrupt.
sbf not working plus no access to recovery sounds like a real true brick possibly.
make sure you hold down the vol down and w/o letting go you put the battery in, when you are in this bootloop that is the only way to be sure you get in to recovery.
what happens when you hold down vol down and put the battery in? does it do anything different at all?
bandroidx said:
hmmm, unless you are going straight to a bootloader screen you should still be able to enter recovery. my only guess is the update was in the middle of updating your recovery when something went wrong and the recovery image is corrupt.
sbf not working plus no access to recovery sounds like a real true brick possibly.
make sure you hold down the vol down and w/o letting go you put the battery in, when you are in this bootloop that is the only way to be sure you get in to recovery.
what happens when you hold down vol down and put the battery in? does it do anything different at all?
Click to expand...
Click to collapse
The phone was damaged because it was downloaded in the middle of an upgrade.
when I hold the power and volume down, I put the battery and three seconds later reappears M, does not load the recovery.
I think I'm going to give up.
May be taking it to a store at & t service, can do something?
Take it to the at&t store. Since it is so badly damaged due to the update "failing" they can replace it with warranty
Sent from my X10i TripNMiUI using XDA Premium App
I'm a rep @ an AT&T corporate location. Yea, if that update failed, we take care of it. I assume you're referring to the OTA 2.2.
Reviving an old thread as where comeranas left off is where I am at.
Wife has a new phone already so I am just trying to revive this one. If not, it goes into garbage.
The screen has been powering up to the Motorola logo only. I can hold the volume up and power button to get to the bootloader/usb screen.
I cannot get to the recovery screen by holding the volume down and power button. No matter how many times I try and in what combination, it always powers up to the Motorola logo.
I ran the sbf file on it twice with RSD Lite and each time when it gets to the part of re-booting it says "Phone is being rebooted."
Then after the progress gets to a 100%, it says, "Please manually power up this phone."
The Motorola logo is on the screen and I have tried to simply push the power button, pull the battery and re-insert it and pull the battery, hold the volume button down and re-insert the battery all while still hooked up to the computer.
After a few minutes the Results box says Passed. But the phone still goes no further than the Motorola logo.
So as of now, the phone still only powers up to the Motorola logo and goes no further.
Naturally it had to start acting up 2 weeks out of warranty. Dang blang warranty timers installed in these phones. lol!
You can try sbf_flash on Linux and both the full and fixed sbf with it. I'm on phone now, so I can't give good instructions or links, but sbf_flash is around in one of the recovery threads here, and the fixed sbf is at quarx2k.ru and my rom mirror (see signature).
If you need it, I can make a Linux Live tutorial for sbf flash, only requirement would be 512mb usb stick or memory card.
I once had to flash sbf 3 times in a row to fix a brick from an accidental Defy kernel flash in cwm.
So the sbf files you are referring to are different than the 2.2.1 sbf file HERE?
I don't run Linux on my comp.
I'll look at the fixed sbf file in your sig. Maybe I just need to run it over and over again until the phone pops. lol! Thanks.
FirePro911 said:
So the sbf files you are referring to are different than the 2.2.1 sbf file HERE?
I don't run Linux on my comp.
I'll look at the fixed sbf file in your sig. Maybe I just need to run it over and over again until the phone pops. lol! Thanks.
Click to expand...
Click to collapse
The fixed sbf contains the bootloader and kernel and it for when you write to either of them and need to reflash back to stock. Handy for when you accidentally flash a Defy from with a boot.img
You don't have to install linux, just use a Live CD and place sbf_flash and the sbf files on a memory stick. Once the Live CD boots, the memory stick should be on the desktop. Open the folder and right click "Open Terminal Here". In the terminal first type:
su
then
chmod 0777 ./sbf_flash
then
./sbf_flash ./fixed_bravo_sbf.sbf
or
./sbf_flash ./p4_kobe_umts_kobe_user_3.4.2-125_KOB_FFW-4_product-keys-ATT-US_ATT-signed.sbf
Just download one of these for your pc's architecture, if you're unsure, then any of the 32-bits will work.
http://www.linuxmint.com/download.php
The reason I suggest using sbf_flash and Linux is that its supposed to fix phones that sbf flashing with RDS Lite won't fix, and it'll flash files that RDS won't like modded root sbfs. Apparently it flashes differently. Don't ask me the difference cause I don't know.
Good Luck.
You said that you couldn't get to the Stock recovery menu, your volume button isn't broke is it? And have you tried up+power and down+power? Kicking it? JK, but throwing my old razr flip phone into the couch as hard as I could used to fix it....it would freeze on boot, but a good toss and it was good as new.
Thanks, gonna give it a try.
I am kinda wondering at this point if the down volume is broke. Though if it was, she would have said something about it before it went down.
I did smack it a few times to no avail. lol!
Related
Buddies,
can anyone upload the original roms for Milestone XT720? (SG, Kr, and other)
So we can do more testing worry free. If anything goes wrong, we can just flash it back to original. It would be nicer if someone can also show how to flash the rom.
------- Edit ---------
Flashing Guide by Hahutzy
Hahutzy said:
Alright, I just crashed my phone into an infinite FC loop by messing with system/app, so a reflash was in order.
Here's how I successfully flashed it back to stock using Windows 7 32bit (dense text ahead):
1) Search somewhere along the lines of "RSDLite - download here" on google
2) Go inside first link, download the file that's named somewhere along the lines of "RSDLite_4.5.3.zip"
3) Install it.
4) Go to http://and-developers.com/sbf:xt720
5) Download the 2nd Full Flash rom, the one where the provider is "Southeast Asia"
6) Unzip that file, you now have a .sbf folder (not file)
7) Put that .sbf folder in C:\Users\Admin\My Documents
8) Shut down phone, take out battery
9) Hold Power + Volume Down + Camera buttons all at once
10) Put in the battery while holding those buttons
11) Phone is now in bootloader mode (screen looks like a command prompt)
12) Release the buttons, and plug USB to computer and phone
13) Open RSD Lite, your phone should be detected as connected (Device name was like "S OMAP 3440" or some BS like that)
14) Click "..." to browse for the .sbf file in C:\Users\Admin\My Documents
15) In RSD Lite, click to highlight your connected XT720, and then click "Start". The first column beside the connected phone should now have a green icon thing, and the ROM is being flashed.
16) DO NOT TOUCH YOUR PHONE, THE CABLE, OR THE COMPUTER! (I went and took a dump)
17) When the "Status" column in RSD Lite says "Please manually power up this phone", so shut it down and power it again. Note: The status stays in "Checksum Group 37" for a verrrrryyyy long time before saying "Rebooting". I thought it got stuck there, but it ended up ok.
18) Your XT720 is now reflashed to stock.
19) You can now close RSD Lite. It will complain saying you will damage the attached device, but I pulled it out wayyyy before this (I unhooked it when it told me to reboot manually) and my XT720 is not dead. You may choose to close RSD Lite before unhooking your XT720.
20) Post your results in this thread and confirm or reject my procedure.
spiderx_mm, you may quote this on your first post for others' easy access to this procedure if you so wish to.
Click to expand...
Click to collapse
I agree on this, i need a EU rom.
i am using an SG xt720. is there anyway to dump the rom?
@mariomsg1, i remember u have reflashed ur rom once before right? may i know where did u get the sg starhub rom last time? could u share it please. thanks
http://and-developers.com/sbf:xt720
xt720 said:
http://and-developers.com/sbf:xt720
Click to expand...
Click to collapse
yes, that is
there latest ROM is STR_U2_01.18.2
mine is STR_U2_02.18.3 (bought unlocked retail version from expansys europe)
anybody got same unrooted ROM? Mine has problems, I am stuck with ROOT which stopped working after couple of days, and now I can neither un-root, nor root again.
mariomsg1 said:
I agree on this, i need a EU rom.
Click to expand...
Click to collapse
can u share a step-by-step flash guide?
U can flash with RSDlite. just need a sbf file.
okie. any version do u recommend? or shall i just use the latest version?
Yes
Sent from my Milestone XT720
Sorry, can i know how to put the phone into bootloader mode? I cant not find in google and this forum for xt720.
press volume and power together
can not go to boot loader. Already press power and volume button
first you need to switch off the phone, then press camera button and power and keep those pressed until recovery icon appears. THEN press volume up and power, if I remember this correctly.
solnyshok said:
first you need to switch off the phone, then press camera button and power and keep those pressed until recovery icon appears. THEN press volume up and power, if I remember this correctly.
Click to expand...
Click to collapse
press play button and power, then press volume up and camera button
play button = small button next to the camera shutter
please help
When i do the guide, phone at first go to recovery mode, and nothing happen. RSD lite can not recognize the phone. I use recovery mode to wipe cache and data like it said factory reset. Then i get stuck. Phone can not start up, stand at motorola logo.
I still can go to recovery mode, but not boot loader mode. And it appear error in recovery mode: E:\ can't open /cache/recovery/command. Now how can i repair my phone?
flash sbf file with rsd lite on bootloader mode
Sorry i cannot put the phone to bootloader mode. It get stuck at recovery mode when i press vol up and camera. And computer did not regconize the phone also. I guess that i still missed the way to go to boot loader. Can you please do a step by step guide? What kind of windows you use?
mariomsg1 said:
flash sbf file with rsd lite on bootloader mode
Click to expand...
Click to collapse
civi309 said:
Sorry i cannot put the phone to bootloader mode. It get stuck at recovery mode when i press vol up and camera. And computer did not regconize the phone also. I guess that i still missed the way to go to boot loader. Can you please do a step by step guide? What kind of windows you use?
Click to expand...
Click to collapse
go to flashing mode directly by pressing volume up+camera button+power button. after that just flash the sbf in provided the windows can see ur phone. make sure u also install the required driver
I downloaded squidly's new rom and then i downloaded a kangerade theme, now know they obviously don't mix. My phone will turn on and act normal and then restart and keep going through a boot loop. Is there anything I can do? Please let me know right away, I'm kind of new to droid 2 since i just switched from a D1 please help.
You will most likely have to SBF. did you do a nandroid before installing the theme?
I do, but I don't know how to sbf, I have nanadroid, but to be honest i probably messed my phone up even more because I did a factory reset (X and power button, search bar.) I get into the android set up screen and Kangerade is STILL on... It does the continuous loop again...
HerroMoto said:
I do, but I don't know how to sbf, I have nanadroid, but to be honest i probably messed my phone up even more because I did a factory reset (X and power button, search bar.) I get into the android set up screen and Kangerade is STILL on... It does the continuous loop again...
Click to expand...
Click to collapse
Try these steps first.
Code:
1. Pull your Battery.
2. Replace battery and power on while holding down the X key.
3. Wait for the android triangle to load.
4. Press the Search key (the magnifying glass)
5. Use down arrow and navigate to wipe cache partition and press OK.
6. Use down arrow and navigate to wipe data and press OK.
7. Reboot phone.
If this does not get you out of the bootloop you will need to SBF. Please see this thread:
http://forum.xda-developers.com/showthread.php?t=804088
Thanks, it didn't work, I'll try that thread hopefully I can get it all figured out still a little confused though. Thanks for the help.
I tried downloading 2.3.1 through rom manager, but it failed for some reason. So I accidentally downloaded it through the phone, and as soon as it began installing, I got a little Android image with a triangle that has an ! in it...How can i please fix this?
edit:i tried holding down the up and power keys with no luck...someone please help
monkeytuner said:
I tried downloading 2.3.1 through rom manager, but it failed for some reason. So I accidentally downloaded it through the phone, and as soon as it began installing, I got a little Android image with a triangle that has an ! in it...How can i please fix this?
edit:i tried holding down the up and power keys with no luck...someone please help
Click to expand...
Click to collapse
You might get more help if you rename your topic title to something more descriptive.
Second, try searching the forum; this has been discussed in numerous threads on both this forum and the developer's section, along with how to fix it.
Try the threads about the update, or dialing a certain code to force it manually (that's where I learned the timing trick to get into stock recovery on the NS). On the screen you're at, try pressing and holding power, then pressing/holding volume up, that should get you into stock recovery.
Also, if you can get into fastboot, you can fastboot flash the CWM recovery back to the device. If you made an nandroid before doing anything, you can at least go back to the device's state before you tried the update.
i could not find anything on this issue on google or here
i tried doing vol up and power, but its still at the screen, and my computer doesnt recognize my phone
use the instruction on the topic to ROOT the phone
http://forum.xda-developers.com/showthread.php?t=875875
and in one of the steps you can use the ADB to push a good ROM back into the phone to be re-flashed
Try just pulling the battery.
If not, you'll have to use fast boot from the SDK. Just follow the howto at the top of this forum to flash original images.
thank you so much!
i locked my bootloader again, and i've been trying to get the 2.3.1 update, but everytime i do try, it freezes at the android warning sign. i also tried installing it via rommanager when i was rooted...whats going on?
any ideas what could be wrong?
monkeytuner said:
i could not find anything on this issue on google or here
i tried doing vol up and power, but its still at the screen, and my computer doesnt recognize my phone
Click to expand...
Click to collapse
monkeytuner said:
any ideas what could be wrong?
Click to expand...
Click to collapse
Are you able to get into Fastboot?
I wonder if part of your problem is that you relocked the bootloader. (Why'd you do that anyways? No advantage, imo.)
Fastboot oem unlock will completely wipe your phone, I mean WIPE EVERYTHING, including the sdcard (photos, music, some apps' data, etc), but such a wipe might get you back to stock firmware and stock recovery, then at least you could boot up. You could also then reflash CWM.
Before doing that, let's try this if you haven't:
Turn off phone.
Hold vol-up, then press/hold power.
You should then be in fastboot mode.
The timing's critical (on my phone anyways) for this step: Select recovery, and have your hands on the power button and volume button ready to push.
Watch the screen very closely, for a bout a half second or so, the screen will flash a box with an arrow dumping out onto the android dude. While that screen is showing, press/hold the power button, then press/hold the vol up button. Important to do the power button FIRST this time (at least it is on my phone).
You should then be able to get into the stock recovery.
Once there, maybe we can figure out where to go, but we need to know how messed up your phone is at this point.
Once in Recovery, you could try wiping cache if it's an option, then trying to reboot. Worth a shot, but not likely to work.
You could also do the factory reset wipe in there, this one shouldn't wipe your sdcard if there's anything critical/valuable on it. It will reset all your settings and logins and wipe the apps you've installed, though. Again, might let you boot up normally.
i flash my phone with a custom rom from this forum
succesfull until RSD Lite step
after RSD Lite, my phone stuck at Motorola logo with blur
tried pull off and pulling on the batery with power and volume up, it got back to bootloader screen
try aother RSD Power, it is still the same
Progress till 100 persen, but the phone stucked at motorola blur logo
any solution, guys?
thanks
What were you trying to flash?
I try to upgrade to froyo.
it stuck after RSD Lite step
Well first, is your phone rooted? Secondly, what stock version did you have?
I think I can get you up and running with Froyo
you may try to install your original version/build number sbf. if its work, maybe you can try flash froyo ROM again. then when you finished restore custom ROM all you have to do is go to bootloader then flash boot/devtree only sbf.. dont pull usb connection. but if RSD want you to turn phone manually then you need to press power button even though your phone at booting state..
i got the same problem, everything was working fine before i done it a couple times but then i used miui and my phone battery died and it wouldnt work after that so i decided to flash with rsd lite and after doing everything normally its just stuck at the motorola and moto blur symbol/animation thing. really frustrating.
-ashur
FL4M3K1NG said:
i got the same problem, everything was working fine before i done it a couple times but then i used miui and my phone battery died and it wouldnt work after that so i decided to flash with rsd lite and after doing everything normally its just stuck at the motorola and moto blur symbol/animation thing. really frustrating.
-ashur
Click to expand...
Click to collapse
did you find fix?
What SBF file did you use?
Have you tried another file?
get into stock recover (Vol Up + Power) then wipe data/cache
Half Bricked
I have an Mb525 rooted (that was) running stock 2.2 Blurred. I installed the Defy boot loader and hard reset/wiped partitions and (tried to) install cm7 from SD, it installs fine, goes fine, everything is all set. Reboot the device and the splash image pops up with the white LED first, then the blue one for boot loader, and finally the green one. It stays on splash screen. I tried 2 different versions of cm7 and both do the same thing. I'm able to access the boot loader, it just doesn't finish loading whatever I flash onto it.
As my phone is dysfunctional, I would appreciate it if you could contact me through my Skype;
kurtdunsmore
I won't receive emails.. =/
Specs:
Moto Defy shipped with 2.1
Rooted
Red Lense
T-Mobile, U.S.A.
Please let me know if any other information would be helpful.
tendyfish said:
get into stock recover (Vol Up + Power) then wipe data/cache
Click to expand...
Click to collapse
to go in stock recovery u must use Vol Down + Power
Solution
I had this problem. Found a solution at 4pda.ru
1. Shut down your phone.
2. Hold Volume- button, press Power button for 2 seconds. Then release both.
3. When you see Android robot press together both Volume+ and Volume- buttons.
4. Erase both Cache and Data.
5. Reboot.
Your phone should boot normally.
aed0101 said:
I had this problem. Found a solution at 4pda.ru
1. Shut down your phone.
2. Hold Volume- button, press Power button for 2 seconds. Then release both.
3. When you see Android robot press together both Volume+ and Volume- buttons.
4. Erase both Cache and Data.
5. Reboot.
Your phone should boot normally.
Click to expand...
Click to collapse
This worked perfectly well. Thank you.
Andy
Hi my power button recently broke and i tried to flash twrp recovery to my working defy with wiui installed which allows to to wake the phone with the volume rocker, it has corrupted my recovery and my defy wont boot into android is my phone bricked as i cant think of anyway to recover it from this. Thanks
morgs640 said:
Hi my power button recently broke and i tried to flash twrp recovery to my working defy with wiui installed which allows to to wake the phone with the volume rocker, it has corrupted my recovery and my defy wont boot into android is my phone bricked as i cant think of anyway to recover it from this. Thanks
Click to expand...
Click to collapse
read this guide: http://forum.xda-developers.com/showthread.php?t=1216982
Boot into Bootloader mode (power-on while holding Vol-Down)
You may need to flash an SBF to get going again.
_ossie_ said:
read this guide: http://forum.xda-developers.com/showthread.php?t=1216982
Boot into Bootloader mode (power-on while holding Vol-Down)
You may need to flash an SBF to get going again.
Click to expand...
Click to collapse
Hi thanks for your reply i cant get into bootloader mode as my power button is broken?
morgs640 said:
Hi thanks for your reply i cant get into bootloader mode as my power button is broken?
Click to expand...
Click to collapse
Pull the battery and reinsert it while holding Vol-Down. This usually works as a power-up.
Do it while connected to a PC. The PC should sound the "device connected" sound.
If the white LED comes on, it usually means the phone is OFF and charging. No LED usually means it's ON and in BL mode (you should get the white text on black screen, but you won't if you have flashed a 'bad' SBF).
Try this a few times.
If nothing else is broken you should be able to get into BL mode and flash an SBF.
But your power button needs to be mechanically fixed at some stage, or your phone isn't going to be much use.
_ossie_ said:
Pull the battery and reinsert it while holding Vol-Down. This usually works as a power-up.
Do it while connected to a PC. The PC should sound the "device connected" sound.
If the white LED comes on, it usually means the phone is OFF and charging. No LED usually means it's ON and in BL mode (you should get the white text on black screen, but you won't if you have flashed a 'bad' SBF).
Try this a few times.
If nothing else is broken you should be able to get into BL mode and flash an SBF.
But your power button needs to be mechanically fixed at some stage, or your phone isn't going to be much use.
Click to expand...
Click to collapse
I have tried all of this already and unfortunately it doesnt get into bootloader mode it just comes up with the moto logo. The phone was working before i tried to update my cwm to twrp i didnt flash an sbf. The power button works fine it must be stuffed on the mainboard i took it apart and the button works fine, why do i need the power button for anyway?
morgs640 said:
I have tried all of this already and unfortunately it doesnt get into bootloader mode it just comes up with the moto logo. The phone was working before i tried to update my cwm to twrp i didnt flash an sbf. The power button works fine it must be stuffed on the mainboard i took it apart and the button works fine, why do i need the power button for anyway?
Click to expand...
Click to collapse
now can you turn on your phone? the power btn works?
try flashing official sbf , root and 2nd-init again.
p.s make sure you have above 20% batt or you gonna spend your time just like me plugging the defy mobo directly to 5 volts.
-Danik- said:
now can you turn on your phone? the power btn works?
try flashing official sbf , root and 2nd-init again.
p.s make sure you have above 20% batt or you gonna spend your time just like me plugging the defy mobo directly to 5 volts.
Click to expand...
Click to collapse
The power button doesnt work but it turns on when battery is inserted, i cant get the phone to pickup in rsd
morgs640 said:
The power button doesnt work but it turns on when battery is inserted, i cant get the phone to pickup in rsd
Click to expand...
Click to collapse
Hold the Volume Up key while inserting the battery.
_ossie_ said:
Hold the Volume Up key while inserting the battery.
Click to expand...
Click to collapse
just goes to moto logo, with usb cable it does the same after about a minute. i can get into the android bootmenu (where u can go into cwm overclock from etc) but recovery doesnt load comes up with missing file error due to me trying to flash twrp
morgs640 said:
just goes to moto logo, with usb cable it does the same after about a minute. i can get into the android bootmenu (where u can go into cwm overclock from etc) but recovery doesnt load comes up with missing file error due to me trying to flash twrp
Click to expand...
Click to collapse
Doesn't bootmenu (Recovery) give you option to reboot into Bootloader? If so, do this and flash an SBF.
_ossie_ said:
Doesn't bootmenu (Recovery) give you option to reboot into Bootloader? If so, do this and flash an SBF.
Click to expand...
Click to collapse
Even if it does, power button is malfunctioning, hence can't select it...
Sent from my MB525 using Tapatalk 2
dbarrera said:
Even if it does, power button is malfunctioning, hence can't select it...
Sent from my MB525 using Tapatalk 2
Click to expand...
Click to collapse
the menu button works to select items in cwm so no problem there, do u mean in bootloader?
_ossie_ said:
Doesn't bootmenu (Recovery) give you option to reboot into Bootloader? If so, do this and flash an SBF.
Click to expand...
Click to collapse
options are
- boot
-cpu
-recovery
-tools
-reboot
dbarrera said:
Even if it does, power button is malfunctioning, hence can't select it...
Click to expand...
Click to collapse
<<< head hits desk >>>
OK so if the phone will boot into recovery it SHOULD also boot into bootloader ?
Maybe I confused OP by saying hold "Vol Down" when I meant "Vol UP" ???
Anyway, OP will probably not get too far without a functional Power button.
_ossie_ said:
<<< head hits desk >>>
OK so if the phone will boot into recovery it SHOULD also boot into bootloader ?
Maybe I confused OP by saying hold "Vol Down" when I meant "Vol UP" ???
Anyway, OP will probably not get too far without a functional Power button.
Click to expand...
Click to collapse
Ok im with you now haha i thought you meant i needed the power button in cwm and i was thinking what for? but i cant get into bootloader anyway so doesnt really matter. I cant get into anything except cwm, holding up just brings up a black light up screen and phone wont recognize in rsd
morgs640 said:
... holding up just brings up a black light up screen and phone wont recognize in rsd
Click to expand...
Click to collapse
Are you SURE? I have had Bootloader work even though nothing shows on screen (when I flashed the wrong SBF). The screen was black but RSD could still "see" the device.
Defy has a locked bootloader (cannot be overwritten), so the fact that you can boot into recovery indicates the bootloader is still there and working. Maybe the problem is in your version of RSD Lite, or your version of drivers installed on the PC, or in your USB cable?
Try uninstalling the drivers from the PC, then rebooting, then attaching the phone and insert battery while holding Vol-Up. This SHOULD reinstall the BL drivers to the PC. Try another USB cable - I have had cables which work for charging but not for data transfer.
_ossie_ said:
Are you SURE? I have had Bootloader work even though nothing shows on screen (when I flashed the wrong SBF). The screen was black but RSD could still "see" the device.
Defy has a locked bootloader (cannot be overwritten), so the fact that you can boot into recovery indicates the bootloader is still there and working. Maybe the problem is in your version of RSD Lite, or your version of drivers installed on the PC, or in your USB cable?
Try uninstalling the drivers from the PC, then rebooting, then attaching the phone and insert battery while holding Vol-Up. This SHOULD reinstall the BL drivers to the PC. Try another USB cable - I have had cables which work for charging but not for data transfer.
Click to expand...
Click to collapse
Alright sound good thanks ill give it a go on my other pc using a different cable, thanks for your continued help with the problem
No go looks like the phone is cooked tried another defy and picks up straight away in rsd on boith pc's and mine doesnt work on either thanks for your help people.
ols help me....defy stuck at black screen...no bootloader
rsd lite recognises through factory cable but while flashing sbf it gives error sending ti rom packets and den it fails.....my stock rom was froyo india.....pls help.....
:crying: