Related
Hello
I have a Magic phone. Is broken.
If you can help Thanks.
howdy explain what you have done to get to that stage and what is wrong with your device???
then i can go ahead and help you in your situation
Thanks.
Me if I am not wrong ROM instead, tried to radio.
mak132 said:
Thanks.
Me if I am not wrong ROM instead, tried to radio.
Click to expand...
Click to collapse
You need to try and explain it more clearly.. I barely understand what you're saying.
From that, all I get is that you've tried to change the radio?
You also have to be more specific, explain all the details. With the information you've given, no one.. even god himself could not help you with this
Sorry. english My language is not good.
My files to the wrong radio recovery menu instead tried to Ram.
After the phone to reset this picture appears, and no other buttons will not work.
Several are now clear of the open is the same.
Iran's android system where I did not open. Represent both the htc phone do not guarantee
mak132 said:
Sorry. Anglysm My language is not good.
My files to the wrong radio recovery menu instead tried to Ram.
After the phone to reset this picture appears, and no other buttons will not work.
Several are now clear of the open is the same.
Iran's Ndrvyd system where I did not open. Represent both the htc phone do not guarantee
Click to expand...
Click to collapse
Uh.....i think you need to wipe your sd card and then try loading the rom again. Whats your native language?
If you can't boot into fastboot (holding back+power), recovery (home+power) or hboot (volume down+power) and your phone is not recognized when connected to the PC then there isn't anything you can do, unfortunately. Can you get into one of these modes?
you have to download the android sdk
and boot the phone witch a recovery image over USB (witch the fastboot.exe)
maybe you should look at the "Non-TMobile 32B Magics" guide:
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod
KingSkeme said:
Uh.....i think you need to wipe your sd card and then try loading the rom again. Whats your native language?
Click to expand...
Click to collapse
Thanks.
My native language is Persian.
I also deleted sd card still not done.
swissp said:
If you can't boot into fastboot (holding back+power), recovery (home+power) or hboot (volume down+power) and your phone is not recognized when connected to the PC then there isn't anything you can do, unfortunately. Can you get into one of these modes?
Click to expand...
Click to collapse
Thanks.
No
I do Nmydh any action.
Placed only on the photo does not do any
tactic3 said:
you have to download the android sdk
and boot the phone witch a recovery image over USB (witch the fastboot.exe)
maybe you should look at the "Non-TMobile 32B Magics" guide:
http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_MT3G/Magic_Firmware_to_CyanogenMod
Click to expand...
Click to collapse
Thanks
Do not understand.
My phone is htc 32a.
If I am not wrong phone so you can flash.
Nokia phones such as the Flash will return to factory settings
Hello!
my G1 does not boot...
i flash wrong hboot...
help me please boot thise device...
You can repair the bootloader by jtag tool like Omnia Repair Tool (ORT).
ohfar said:
You can repair the bootloader by jtag tool like Omnia Repair Tool (ORT).
Click to expand...
Click to collapse
thank you, but it is device cost more then my g1
may be service centre have Repair Tool...
any posible do not work?
rasperepodvipodvert said:
Hello!
my G1 does not boot...
i flash wrong hboot...
help me please boot thise device...
Click to expand...
Click to collapse
more details please? What exactly did you do? It's hard for anyone to help you without sufficient information.
cg87 said:
more details please? What exactly did you do? It's hard for anyone to help you without sufficient information.
Click to expand...
Click to collapse
i flash this file "update-hboot-1762007-signed.zip" from recovery-RA-dream-v1.6.2
and reboot my G1, then G1 dead
update-hboot-1762007-signed.zip - is HTC Magic hboot ...
View attachment update-hboot-1762007-signed.zip
red lights when usb cable connect to PC....
i don't belive that kill boot program it is possible.... why g1 has no button for hard reset
If the SPL is screwed its screwed.
Enjoy your new paperweight.
vixsandlee said:
If the SPL is screwed its screwed.
Enjoy your new paperweight.
Click to expand...
Click to collapse
but power lights is on when i attached G1 to PC.
i want boot from SD card... make GOLD CARD and boot... it is may be help me?
rasperepodvipodvert said:
i flash this file "update-hboot-1762007-signed.zip" from recovery-RA-dream-v1.6.2
and reboot my G1, then G1 dead
update-hboot-1762007-signed.zip - is HTC Magic hboot ...
View attachment 293642
red lights when usb cable connect to PC....
i don't belive that kill boot program it is possible.... why g1 has no button for hard reset
Click to expand...
Click to collapse
Why did you flash a Magic SPL on your G1 which is a Dream?
Reading is a lost art. Only excuse he has is that English isn't his first language.
so will it not boot at all?
have you tried to boot into recovery mode?
i would try booting into recovery mode. if you are able to, then you may be able to save the correct file onto the sd card using your computer, then putting it back into the phone, then doing the recovery mode. using the command prompt to flash the boot image.
cg87 said:
Why did you flash a Magic SPL on your G1 which is a Dream?
Click to expand...
Click to collapse
because i noob
jakijal said:
so will it not boot at all?
have you tried to boot into recovery mode?
i would try booting into recovery mode. if you are able to, then you may be able to save the correct file onto the sd card using your computer, then putting it back into the phone, then doing the recovery mode. using the command prompt to flash the boot image.
Click to expand...
Click to collapse
i don't boot into recovery mode... SPL is wrong...
When i press HOME+POWER don't enithing...
When i press POWER+BACK - lights(diod) is of...
I have recovery boot on this device (G1), but i didn't because don'n boot into recovery mode....((((((
I'll make this really easy.
If Home + Power doesn't work
If Camera + Power doesn't work
You need a new phone.
I may eat those words. It appears some people have tried this and reported it working:
http://forum.xda-developers.com/showthread.php?t=571457
r4d14n7 said:
I may eat those words. It appears some people have tried this and reported it working:
http://forum.xda-developers.com/showthread.php?t=571457
Click to expand...
Click to collapse
It's very rare that works..
However.. the JTAG thread has finally born some fruit: the first successful unbrick!
http://forum.xda-developers.com/showpost.php?p=5911627&postcount=302
I think I bricked my Magic flashing ENG SPL-HBOOT-1.33.2004.
Starts, vibrates and gets stuck at splashscreen "HTC Magic". If I hold the ball when it starts then the blue led will shine forever, dont know why.
It charges when power is attached.
fastboot boot recovery.img does not work, it never finds the phone. Iv done all key combos I could find and it does not react.
I tried to add SAPPIMG.nbh to the memory card, but that did nothing. Not sure that I have the right .nbh, iv got a 32A.
Anyways, iv done anything I can think of, nothing works.
Any suggestions? Dont say JTAG....
Edit: I saw the Arrow box thing after it had flashed the new SPL and restarted, but I only saw it once and it just flashed fast on the screen. Blink and I would have missed it.
Found something very very interesting!
If the device is off and I plug in the USB to my PC after about 2minutes if finds a Unknown Device.
The info I can get from the device is this:
Capabilities:
00000044
CM_DEVCAP_REMOVABLE
CM_DEVCAP_RAWDEVICEOK
Power data:
Current power state:
D3
Power capabilities:
0000005D
PDCAP_D0_SUPPORTED
PDCAP_D2_SUPPORTED
PDCAP_D3_SUPPORTED
PDCAP_WAKE_FROM_D0_SUPPORTED
PDCAP_WAKE_FROM_D2_SUPPORTED
Power state mappings:
S0 -> D0
S1 -> D2
S2 -> D2
S3 -> D2
S4 -> D2
S5 -> D3
Device Instance Path:
USB\VID_0000&PID_0000\5&2EAB04AB&0&1
DevNode status:
01806400
DN_HAS_PROBLEM
DN_DISABLEABLE
DN_REMOVABLE
DN_NT_ENUMERATOR
DN_NT_DRIVER
Click to expand...
Click to collapse
Still cant reach if with Fastboot and as soon as I power it up the Unknown Device disappears.
Edit: Im going to try to connect to it as a Raw device, see whats what.
Any luck?
I'm gona follow this :0)
No luck yet.
Cant really get it recognized in any of my USB RAW software cant get any drivers installed instead of the Unknown Device and its hard since it does not have a PID.
Not done yet, but its not looking very good.
Subscribed.
If it's powering on (sort of) that's a good sign! If the computer sees it at all that's also a good sign.
Good luck to you! Here's a link to a sappimg file that's known to work on mytouch 1.2 which is sort of a 32a. Can anyone verify that this file will work for him?
Also I thought 32a had to be sappimg.zip and not sappimg.nbh? Try that...
Anyway, here's your link.
http://theunlockr.com/2009/08/22/how-to-unroot-your-mytouch-3g/
EDIT - this article is specifically for the Rogers Magic.
http://theunlockr.com/2009/10/06/how-to-unroot-the-htc-magic-non-mytouchget-back-to-cupcake/
Ill try sappimg.zip
Can anyone remind me what buttons to hold when I want to to load the sappimg? VolumeDown + Home + Power?
pompom said:
Ill try sappimg.zip
Can anyone remind me what buttons to hold when I want to to load the sappimg? VolumeDown + Home + Power?
Click to expand...
Click to collapse
Vol Down + Power. Good luck!
Make sure you double-check on whether the file I linked you is compatible with 32a. That file works with the myTouch 1.2 which is a 32a board that uses 32b radio. I have no idea which spl it uses, so do your research first! Since you're a standard 32a (aren't you?) that file may or may not be compatible.
Yes, its a standard 32A.
Cant I build my own zip with the required files?
Edit: No reaction what so ever on the VolDown. When I think of it, right before I unplugged the phone from my PC the last time it worked I actually had a device named HTC Dream installed. Since I was playing with recovery roms etc I did not care much about it. But now, seeing that its dead, is it possible that it will react to dream.zip or whatever file name is used?
Edit2: Found it, dreaimg.
pompom said:
Yes, its a standard 32A.
Cant I build my own zip with the required files?
Edit: No reaction what so ever on the VolDown. When I think of it, right before I unplugged the phone from my PC the last time it worked I actually had a device named HTC Dream installed. Since I was playing with recovery roms etc I did not care much about it. But now, seeing that its dead, is it possible that it will react to dream.zip or whatever file name is used?
Edit2: Found it, dreaimg.
Click to expand...
Click to collapse
Damn, that sucks... Also no reaction from Home+Power? Do you have a dedicated camera button? Try camera button+power if you do.
Dream? Dream is the G1, totally different hardware. 32B.
Yes, I know the dream is G1 32B.
But my PC found a HTC Dream, the fastboot screen said 32A and the hardware is a Magic.
I would also want to know whats with this blue led. When I hold down the scroll ball and start the device the blue LED lights up but the screen does not. Device does not react to anything, need to pull battery to restart it. Ideas?
pompom said:
Yes, I know the dream is G1 32B.
But my PC found a HTC Dream, the fastboot screen said 32A and the hardware is a Magic.
I would also want to know whats with this blue led. When I hold down the scroll ball and start the device the blue LED lights up but the screen does not. Device does not react to anything, need to pull battery to restart it. Ideas?
Click to expand...
Click to collapse
Wow, that's weird, and beyond the scope of my knowledge, unfortunately.
No way to get into fastboot? If you can get the phone into fastboot you can sappimg back to life.
Check out this thread.
http://forum.xda-developers.com/showthread.php?t=571457
Yeah, I read that thread.
Iv done about 30 diff combos to get in to fastboot, no luck.
pompom said:
Yeah, I read that thread.
Iv done about 30 diff combos to get in to fastboot, no luck.
Click to expand...
Click to collapse
Nuts... Sorry bro.
pompom said:
I think I bricked my Magic flashing ENG SPL-HBOOT-1.33.2004.
Starts, vibrates and gets stuck at splashscreen "HTC Magic". If I hold the ball when it starts then the blue led will shine forever, dont know why.
It charges when power is attached.
Edit: I saw the Arrow box thing after it had flashed the new SPL and restarted, but I only saw it once and it just flashed fast on the screen. Blink and I would have missed it.
Click to expand...
Click to collapse
I´m rather new and read tons of documentation by now but it seems i have exactly the same Problem with my HTC Magic 32B.
Best solution is now to get a new phone?
Edit: Sometimes when i try to get into the Fastboot Mode, the HTC Magic splashscreen disappears after a few seconds and a "new" kinda blue background is sliding from the left to the right but without any other effect
JTAG seems to be the only other option right now.
Im not interested enought to find a solution to this.
I think I just bricked my G2! The phone wont start up anymore, it gets stuck at the htc loading screen. What can I do to fix this?
another scaremongerer....
its NOT BRICKED!
such a drama queen.
Just run an official RRU EXE or go into your recovery and flash a different custom rom (if you have a recovery).
i think that I have a similar problem..
I was doing some flash rom( in case Flykernel-11c)...after the process, the android had a strange behavior:
1. The SD card stopped to work.
2. And ALSO, the USB connection stopped. But the power connection is working.
I can't use the adb shell to connect because it doesn't find the device.
So, i cant use the recovery of backup, because i can't acess the backup allocated in SDCARD.
Just a note: I tested the SDCARD in another device, and its WORKING.
Any ideia?
That happened to me a while ago. Unless you have an engineering spl where you can access the sd-card reset command (or whatever it is) I think you're knackered. Someone else feel free to correct me if I'm wrong though.
doubt
TheReverend210 said:
That happened to me a while ago. Unless you have an engineering spl where you can access the sd-card reset command (or whatever it is) I think you're knackered. Someone else feel free to correct me if I'm wrong though.
Click to expand...
Click to collapse
What do you mean? "Unless you have an engineering spl"
Turn your phone off, then turn on whilst holding the back button. There is a white screen and a few lines of text at the top. If it says s-on, you have a normal, locked spl, if it says s-off its an engineering one. Anyway, the engineering spl has a few more commands you can access, one of which resets access to the sd card and usb. Unless you have an engineering spl and can access that command, I don't think there is too much you can do.
Hey friend need help from you guys i have a Samsung focus which i got from my friend and this phone does boot its hangs at the Samsung boot screen. What i know about this phone its a refurb piece from at&t apart from that i don't know anything what OS version it was running.
So this is what i have tried so far.
I tried to hard reset the phone but when i tru to put it to the reset mode the second it goes to the mode it restarts and and comes back to the boot screen, but some how i managed to format it but to ass no luck with the formatting.
Tried the Download mode also and tried to flash the stock ROM from http://forum.xda-developers.com/showthread.php?t=1131022 but i got an error >
THIS NOT AN RETAILS DEVICE, How come it cannot be a retail device if it is not an retail device then do we have any other rom for this specific phone which is not an retail phone ?
I searched for this (NOT A RETAIL DEVICE) and was not able to find anything.
Any help from you guys will be really appreciated.
Thanks.
More info about the phone.
Samsung Focus
OS Version- No idea what it was running.
Build- 1012
REV 1.3
Try the Flasher from this post (4th link, WP7 Downloader 7.41).
Extract the UCJK2 rom and instead of WP7 Downloader 7.05 try that one.
If that fails you may have to flash a custom rom (see the post in my sig). Or wait for someone with a better solution.
Thanks for replying mate, Tried the stock rom with the downloader u have suggested but i get following errors.
Partition image is not equal do u erase and download all ?
If i press YES on that window i get this> SPH-I350 Downloader has stooped working and ask me to close the program ?
And if i press the NO the windows close and phone boots to Samsung boot screen from download mode.
To add to the above can i flash custom rom over this as the phone only goes to Download mode ?
rkkaranrk said:
To add to the above can i flash custom rom over this as the phone only goes to Download mode ?
Click to expand...
Click to collapse
You can try. However first things first.
Can you try using both flashers from the UCJK2 rom?
WP7 Downloader Ver 7.21 for All Device (Publish version).exe
WP7_Downloader_Ver_7.05_for_Retail_Device_(Product_Force_Select_MD5_X).exe
Normally you should be able to flash UCJK2.
EnderPsp said:
You can try. However first things first.
Can you try using both flashers from the UCJK2 rom?
WP7 Downloader Ver 7.21 for All Device (Publish version).exe
WP7_Downloader_Ver_7.05_for_Retail_Device_(Product_Force_Select_MD5_X).exe
Normally you should be able to flash UCJK2.
Click to expand...
Click to collapse
Tried the WP7 Downloader 7.21 and got this error
The device does not match with the selected binary, Downloader will not do anything.
With WP7 Downloader 7.05 i get this.
This device is not retails device, Downloader will not do anything.
If you can get into download mode then try installing MAGLDR, then once in MAGLDR install a custom ROM. It won't do any checks for RETAIL or otherwise and will just flash what you tell it to.
tried to install MAGLDR but but after the installation completed it said it will reboot to the mag mode but it dint and booted to the Samsung logo.
you have to press and hold vol-down + camera then power on the device. It should propmt you to format or press '<-' just press '<-' and then you will be in MAGLDR.
Yeah I was able to boot into MAG and the I tried to flash the clean rom 2.0 but it gave me an error- wring size block inside ......I have heard about bad blocks but what is this wrong size ?
To add to above phone goes to download mode easily but to get it to the format screen I have to try 100 time.
Sent from my GT-I9000 using Tapatalk 2
rkkaranrk said:
Yeah I was able to boot into MAG and the I tried to flash the clean rom 2.0 but it gave me an error- wring size block inside ......I have heard about bad blocks but what is this wrong size ?
To add to above phone goes to download mode easily but to get it to the format screen I have to try 100 time.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
It sounds like someone at some time tried to flash a Focus v1.4 ROM to your v1.3 phone. This is what happens when someone does that. There is no fix currently. Sorry.
Hmmmm........will there be any chance for the fix in future ? Or should I sell it as parts....
Sent from my GT-I9000 using Tapatalk 2
rkkaranrk said:
Hmmmm........will there be any chance for the fix in future ? Or should I sell it as parts....
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
It's an old device so there probably wont be too much in the way of new development/fixes, but no one can say for sure.
same here
I have the same problem too, my samsung focus stuck on samsung screen. Can you please provide some steps on how to flash it, and also can you please provide the links on where to download the tools needed to flash my phone.
Thank you so much.
I´m stuck in the same.
I buy this phone on ebay por pars.
on the back says REV 1.3 but when i try to restore in WP7 7.41 says WP7_PRODUCT_4K_DETECTED CC
if i try to restore with 1.3 says that is not correct.
Sometimes goes t recovery, something not.
magldr is installed, and when i try to install a rom for 1.3 says something that block number is incorrect.
any possible solution or is dead?
thanks!