[PROBLEM] screenlock stuck - HD2 Android Q&A, Help & Troubleshooting and Genera

I installed android on my HTC HD2 about 3 months ago. a few weeks ago the lockscreen was bugging. I couldn't use the bottom right button to unlock the phone, i had to use the middle button and then i could unlock the phone. Last week the problems became worse and worse, and now my phone is completely stuk in the lock screen, even after 100 reboots. I think it is a software problem, but is there anyone that knows about this problem? Or knows how i can return the phone to the factory rom without unlocking?
Sincerely ,
Menno

menno-v said:
I installed android on my HTC HD2 about 3 months ago. a few weeks ago the lockscreen was bugging. I couldn't use the bottom right button to unlock the phone, i had to use the middle button and then i could unlock the phone. Last week the problems became worse and worse, and now my phone is completely stuk in the lock screen, even after 100 reboots. I think it is a software problem, but is there anyone that knows about this problem? Or knows how i can return the phone to the factory rom without unlocking?
Sincerely ,
Menno
Click to expand...
Click to collapse
Hi,
Can you get into bootloader?
Hold the volume button down when you power on.
Do you get the tri-color screen?

yes i can get into the tri-color screen

what ROM are you running? I was on RAFDROID HD with the theme applied & i had noticed it difficult at times to unlock. I would have to try countless times before it responded correctly. i uninstalled RAFDROID & installed a different ROM & now i no longer have that problem so maybe try to see if you have the problem with a different ROM.
also i formatted my sd to remove all the clutter that has build up over time so i cant say which solved my issue.

menno-v said:
yes i can get into the tri-color screen
Click to expand...
Click to collapse
Hi,
Go to HTC site>support>download>ROM upgrade and choose appropriate ROM upgrade for your phone
Change the .exe to .zip and
Extract with winrar or 7z the RUU_Leo_HTC_****************************_Ship.zip
find the larger *.nbh file and rename it to leoimg.nbh and place this file on an sd card that is 4gb or less
and reboot to bootloader (the one with 4 colors,hold volume down button until you see "SEARCHING")
follow the instructions from there.

Related

Stuck on WM load and can't flash.

Hi all,
i have a problem with one device here - Orbit II.
It is stuck on booting WM with volume controls on the screen. Usually it's not a big deal and can be solver with HR or by flashing a new rom, but the problem is that i cannot get it to do a HR: white screen with warning appears but when i press send buttong(the green one) - nothing happens, it doesn't react at all.
Ok, i was thinking to flash it, but another problem appeared: i can't enter bootloader(2 softbuttons+reset), same procedure works fine on my own device but this one just reboots and no bootloader...
I'm kinda out of options now.
Any help is appreciated.
Magnus23 said:
Ok, i was thinking to flash it, but another problem appeared: i can't enter bootloader(2 softbuttons+reset), same procedure works fine on my own device but this one just reboots and no bootloader...
I'm kinda out of options now.
Any help is appreciated.
Click to expand...
Click to collapse
press & hold camera button and make soft reset...
Thank you for the answer but i as said in first post, i have tried this, the white screen with the warning appears but pressing Send button does nothing, device does not react to this, so hard reset doesn't happen.
If someone could point to me any other way to enter bootloader - i can work my way from there.
I have also tried MTTY but USB connection doesn't appear in the list(yes, i have killed the activesync processes).
which screen
1st,
2nd, radio protocol version
3rd gif splash
4th wimo load screen
And also what rom have you got on atm.
It is stuck on 4th wimo load screen.
I have no idea about the actual WN version as it's not my device, but i assume it's the original O2 rom since there is still O2 splash screen.
Magnus23 said:
It is stuck on 4th wimo load screen.
I have no idea about the actual WN version as it's not my device, but i assume it's the original O2 rom since there is still O2 splash screen.
Click to expand...
Click to collapse
o well then i take its not hard-spl'd in which case i really do not get it, i have got into bootloader at the radio version screen so i dont get this one?? Is it still covered by o2 warrenty, it is 2 yrs long so best bet go to them and see what they say...
Thats if it has no hard-spl... If not take the battery out for a day and see if that brings it back to life, stranger things have happened seen that solve quite a few problems.
Well, device is not mine, a friend asked to look at it. I don't think he got a warranty left.
Well, the thing is, its not a big deal realy, it's not bricked or anything, i just need to get into bootloader, from there i can flash hardspl and the rest from SD... i just haven't seen this thing before... unable to enter the bootloader.
Is there any way to force the device to enter bootloader? I mean other than the standart procedures of Camera+reset?
I think i've seen somewhere a CustomRUU that could do that, even with incomplete WM boot. Like send some commands to the device to enter bootloader.
Does anyone know anything like this?

[Q] Bricked phone after task29 and rom flashing

Hello. First I want to thank all of you who develop roms and the like. I have had such a blast over the past month and a half customizing my phone in ways I never thought possible. Last night I ran flashaholicruu.exe on my HTC HD2 Leo. The task29 seemed to work properly, however when I attempted to flash the rom I received errors. I tried Leo_Radio_2.11.50.26.sfx, which had previously worked on my phone. It stopped at 96%. I did the recovery, however the phone now will not even boot the splash screen. It simply vibrates non-stop when I turn it on until I remove the battery. Does anyone have ANY advice at all? Am I able to load a ROM onto the SD card and directly boot from it while my phone is in this state?
I have removed the battery and reinserted it. Did not work.
I have also tried pressing the volume buttons and the power on button to get the bootloader, but just vibrates in the same manner as when I press on button.
Please help!
Thank you
happend to me with a friends phone...i jus replaced it under insurance
Nismo300zx said:
happend to me with a friends phone...i jus replaced it under insurance
Click to expand...
Click to collapse
Ahh. I wish. T-Mobile is giving me a hard time about replacing it because I was not the original owner of the phone. The phone is only about 3-4 months old though.
I had this happen to me.
Try to load it directly into bootloader by holding vol-down when you press power button, then flash another radio (i recommend 2.12.5) then try another ROM thru RUU.
Also, make sure your battery is place in there securely and that all 3 pins from the phone are sticking out.
I had a situation where one of the pins was sticking vertically and the battery was only hitting 2 (from doing too many battery pulls) and it did this weird vibrate splash screen boot sequence.
electrokitten said:
Ahh. I wish. T-Mobile is giving me a hard time about replacing it because I was not the original owner of the phone. The phone is only about 3-4 months old though.
Click to expand...
Click to collapse
You'll need contact details for the original owner, but by law they have to honor the agreement they put in place with them, regardless of whether you are that person or not.
Just get back onto T-Mobile and if they say no then speak to someone higher up. I know this to be the case after selling a palm pre to someone at the beginning of the year and it died on him shortly after.
johncmolyneux said:
You'll need contact details for the original owner, but by law they have to honor the agreement they put in place with them, regardless of whether you are that person or not.
Just get back onto T-Mobile and if they say no then speak to someone higher up. I know this to be the case after selling a palm pre to someone at the beginning of the year and it died on him shortly after.
Click to expand...
Click to collapse
Really? This is good to know. I contacted the original owner. I feel so bad and I hope he doesn't think I am trying to scam him. I just want a working phone and I think that T-Mobile should honor that.
orangekid said:
I had this happen to me.
Try to load it directly into bootloader by holding vol-down when you press power button, then flash another radio (i recommend 2.12.5) then try another ROM thru RUU.
Click to expand...
Click to collapse
I think the bootloader may be gone. Does the task29 remove this? I can't get even to the bootloader using the method above (I have tried many times).
orangekid said:
Also, make sure your battery is place in there securely and that all 3 pins from the phone are sticking out.
I had a situation where one of the pins was sticking vertically and the battery was only hitting 2 (from doing too many battery pulls) and it did this weird vibrate splash screen boot sequence.
Click to expand...
Click to collapse
Good to know, I will try this. I do have some bent pins.
No task 29 doesn't remove the bootloader, I always use it before flashing a new ROM...
Sent from my HTC HD2 using XDA App
copy the nbh file from the stock rom to the sd card..that usually fix it..
gabbs said:
copy the nbh file from the stock rom to the sd card..that usually fix it..
Click to expand...
Click to collapse
Good advice... Now if only he could access the bootloader he'd be sorted
gabbs said:
copy the nbh file from the stock rom to the sd card..that usually fix it..
Click to expand...
Click to collapse
Major_Sarcasm said:
Good advice... Now if only he could access the bootloader he'd be sorted
Click to expand...
Click to collapse
he needs to rename the .nbh file to LEOIMG.nbh and pair it with the RUU that came
with that same stock ROM
but then again, if he cant get into bootloader, the phone is definitely bricked
electrokitten said:
Hello. First I want to thank all of you who develop roms and the like. I have had such a blast over the past month and a half customizing my phone in ways I never thought possible. Last night I ran flashaholicruu.exe on my HTC HD2 Leo. The task29 seemed to work properly, however when I attempted to flash the rom I received errors. I tried Leo_Radio_2.11.50.26.sfx, which had previously worked on my phone. It stopped at 96%. I did the recovery, however the phone now will not even boot the splash screen. It simply vibrates non-stop when I turn it on until I remove the battery. Does anyone have ANY advice at all? Am I able to load a ROM onto the SD card and directly boot from it while my phone is in this state?
I have removed the battery and reinserted it. Did not work.
I have also tried pressing the volume buttons and the power on button to get the bootloader, but just vibrates in the same manner as when I press on button.
Please help!
Thank you
Click to expand...
Click to collapse
What exactly did you do to try and enter bootloader mode? You said you pressed the volume 'buttons' and the power button but that combination would initiate a Hard Reset and not bootloader mode..
How to get into your Bootloader
1. Turn your phone off
2. Press and hold the VOLUME DOWN then Press and hold the POWER button. After about 3 seconds the tri-coloured screen should appear.
3. To exit Bootloader you need to remove your back cover and pull the battery out for a few seconds, then replace it and press the power button to reboot your phone.
If you cannot get into the bootloader with the above instructions then it looks like you have bricked your device somehow but im not sure exactly how you could do it as task29 doesnt touch HardSPL.
If you can get into bootloader then you can flash a rom back to your device using the sd card method in my guide *HERE*.
Mark.

Brick HD2 ,I've only htc logo without red info

Hi,I bought an htc hd2 that show only HTC green logo without red information. The seller told me that He bricked it flashing a rom (that I don't know if it is a wrong rom). What should I do ? Thanks in advance
Try pushing vol up + en power button when the phone is off. What do you get then?
What should I push ? vol up and end call ?
hold vol down, tap and release power.
i cant say for certain whether yours is the same as the situation i had, but my original hd2 wouldnt boot and would only show a white screen with the green HTC and none of the rom/radio info in red in the bottom corner..it ended up being toast and had to be replaced under warrenty. not saying yours is, but thats what happened with mine.
Razorbacktrack5535 said:
Hi,I bought an htc hd2 that show only HTC green logo without red information. The seller told me that He bricked it flashing a rom (that I don't know if it is a wrong rom). What should I do ? Thanks in advance
Click to expand...
Click to collapse
Wrong rom? Probably - wrong radio... Congrats! You bought a nice paperweight.
I had the same a week ago. I had my phone for just 2 hours, then it suddenly stopped working when I restarted it. My HD2 wouldn't boot and did only show the white screen with HTC logo. I tried to do a hard/soft reset, and I even updated the rom, but nothing worked. I't happened because I was removing a app in the Windows Mobile Device centre and it crashed. My phone is now in repair.
Follow the 2nd part of this guide:
http://www.htc.com/europe/howto.aspx?p_id=297&id=182
Had the same prob with op and kept sticking at white logo htc and didn't progress any further. Just do that guide and phone will return back to normal.
Razorbacktrack5535 said:
Hi,I bought an htc hd2 that show only HTC green logo without red information. The seller told me that He bricked it flashing a rom (that I don't know if it is a wrong rom). What should I do ? Thanks in advance
Click to expand...
Click to collapse
Download from HTC site the original ROM from you phone using the serila number under the battery. Unzip it in some directory. Rename the file RUU_signed.nbh to LEOIMG.nbh. Put the SD card from your phone in the computer, format it to FAT32 and copy LEOIMG.nbh file to the rot directory of SD card. Put the card back in phone (phone should be switched off). Then put phone in boot loader: push and hold VOLUME DOWN button and push for short the POWER button, keep holding VOLUME DOWN button until bootloader starts (4 colors screen). Follow the instructions on screen. The phone will be flashed with the original SPL, ROM & Radio from the file LEOIMG.nbh on SD card.
After that it should work normally. After flashing perform hard reset.
Note that battery should be well charged before flashing.
If above does not work your phone probably has hardware defect which could be rectified only in service by changing of some PCB inside. I had similar problem but not related to flashing and service changed power PCB (on warranty).
@AndrewSh
The seller tell me that he flashed a rom from emulr
Razorbacktrack5535 said:
@AndrewSh
The seller tell me that he flashed a rom from emulr
Click to expand...
Click to collapse
You know - English is not my native so can you please be more specific - what do you mean by emulr - emulator or anything else?
Anyway - open the battery rear cover, find the Reset (bottom left), press and hold Volume down and push reset with a stylus or pen or whatever, holding Volume down. It will try to enter to bootloader mode. Do not release Volume down until the three-color picture will appear on screen.
Read what you see and write down here....
Sorry I made an error. I would say emule ,the filesharing program
If you can see the HTC logo your device isn't bricked.
This means that SPL is still alive and working. You only need to enter bootloader mode and flash a FULL RUU.
@kholk
Can you tell me what should I do ? Can you give me the link to the files that I need?
kuwait said:
Download from HTC site the original ROM from you phone using the serila number under the battery. Unzip it in some directory. Rename the file RUU_signed.nbh to LEOIMG.nbh. Put the SD card from your phone in the computer, format it to FAT32 and copy LEOIMG.nbh file to the rot directory of SD card. Put the card back in phone (phone should be switched off). Then put phone in boot loader: push and hold VOLUME DOWN button and push for short the POWER button, keep holding VOLUME DOWN button until bootloader starts (4 colors screen). Follow the instructions on screen. The phone will be flashed with the original SPL, ROM & Radio from the file LEOIMG.nbh on SD card.
After that it should work normally. After flashing perform hard reset.
Note that battery should be well charged before flashing.
If above does not work your phone probably has hardware defect which could be rectified only in service by changing of some PCB inside. I had similar problem but not related to flashing and service changed power PCB (on warranty).
Click to expand...
Click to collapse
Did u even tried that? I am 99% sure that that will work!
Razorbacktrack5535 said:
@kholk
Can you tell me what should I do ? Can you give me the link to the files that I need?
Click to expand...
Click to collapse
I told you what to do and what to write here afterward. Then we will see what to do after you read your current SPL info....
Hi,
I tried to power on the phone after some days and it didn't show nothing,black screen.I opened It and the "power keyboard" was broken in two parts (the connector and the keyboard).So I bought a new one and The phone doesn't want to show something.What should I do ? Please,Please help me :'(
Up :'( Please help me
Little Up :'(
Razorbacktrack5535 said:
Hi,
I tried to power on the phone after some days and it didn't show nothing,black screen.I opened It and the "power keyboard" was broken in two parts (the connector and the keyboard).So I bought a new one and The phone doesn't want to show something.What should I do ? Please,Please help me :'(
Click to expand...
Click to collapse
When I first started reading posts in this thread i thought you had some hope, but now, your device is officially bricked
Send it in for repair, even without warranty . You have to, unless you know how to fix it. Sorry

[Q] HElp Please: Touchscreen doesn't answer when phone is locked

Dear All
I have a very big pb since i tried to install a new Android Rom on my HD2 using SD method (Haret.exe ...)
In fact if i lock my screen (in Winmo or Android) and i want to unlock it, the touch screen is no longer active while it is working like a charm before locking the screen...
Any idea????
Regards
Any idea????
fana75 said:
Dear All
I have a very big pb since i tried to install a new Android Rom on my HD2 using SD method (Haret.exe ...)
In fact if i lock my screen (in Winmo or Android) and i want to unlock it, the touch screen is no longer active while it is working like a charm before locking the screen...
Any idea????
Regards
Click to expand...
Click to collapse
Try doing a reset to do this turn off your phone and then turn it back on but keep the power button pressed down until you see the main menu of MAGLDR come up and use the volume up and down buttons to scroll through the options and find recovery and select it with the send/call button. If you select the wrong option use the end button to back out of any submenu and get back to the main menu.
knows issue
Thanks for your answers
I don't have MAGLDR, i used to install SD Android ROM with Haret.exe directly from an Android dir on the SD.
Reading other forums it seems that it is a know issue: touch screen die after a while (generally close to the 1 year of waranty): starting with trouble more visible when screen is locked.
I will return it to for Repair.
Regards
fana75 said:
Thanks for your answers
I don't have MAGLDR, i used to install SD Android ROM with Haret.exe directly from an Android dir on the SD.
Reading other forums it seems that it is a know issue: touch screen die after a while (generally close to the 1 year of waranty): starting with trouble more visible when screen is locked.
I will return it to for Repair.
Regards
Click to expand...
Click to collapse
Sorry man thought you meang you had a NAND Andriod ROM flashed via SD card. If you want you can perform a hard reset of your Windows Mobile While the phone is off hold both the volume up and down buttons down and the power button down until you see the multicolor screen come up and follow the on screen instructions. But this will delet any contacts, pictures, videos, documents, and etc so make sure you back up everything accordingly befor you do the reset. But if hou have a warranty I highly suveat you use it.

[Q] HD2 touchscreen not responding aftef screen lock

Hi,
i`ve got a problem with my touchscreen, after installing SD card distribution of Android, few restarts later my touchscreen stpped to respond every time when my device is locked, and i have to restart it.
I tried to flash new rom - nothing happend
H-E-L-P !
remove sd card delete the partitions and format - use Easeus free edition for this
Then boot the phone - reun task 29 from your pc then reread the flashing instructions for the rom of your choice and try again - ensure the rom supports your version og HD2 whatever that may be
All done, and doesn`t work. I`m wonderig if is possible, that is malfunction of touchscreen, because it have been changed after it was broken.
i'm having the same issue. after it goes into its first lock screen the touch screen input doesn't work. i've flashed the ROM and also task29 the sucker. i've reverted back to stock ROM too. I'm not running android or even try to install from SD.
Bump..!
Anybody got a solution for this..?
I have a HD2 with android on it.. nand version.. so it runs without sd card..
The phone works fine.. but when you lock it.. the screen doesnt respond anymore.. its running miui at the moment, so i can unlock the lockscreen.. but still the screen doesnt respond..
i see more people having this issues, so i hope to find a solution..
keep on searching..!
So Am I
after 5 moths of Android Nand use I have the same problem. I have changed kernel/ROM
I made few times task29 wipe cache/dalvik but still the same
Yesterday I try install the orginal WWE 6.5 ROM but nothing change...
Maybe is hardware issue ? Few times with android rom my leo was very hot and maybe something burn inside ? or its stupid idea but who knows
gomez.pl said:
So Am I
after 5 moths of Android Nand use I have the same problem. I have changed kernel/ROM
I made few times task29 wipe cache/dalvik but still the same
Yesterday I try install the orginal WWE 6.5 ROM but nothing change...
Maybe is hardware issue ? Few times with android rom my leo was very hot and maybe something burn inside ? or its stupid idea but who knows
Click to expand...
Click to collapse
Sure it's hardware: replacing touchscreen is your best choice!
But is this because of android on hd2? or do other people with stock phones also see this problem?
Hd2 is already gone here.. but i think its a good thing to know for the scene..
thommy86 said:
But is this because of android on hd2? or do other people with stock phones also see this problem?
Hd2 is already gone here.. but i think its a good thing to know for the scene..
Click to expand...
Click to collapse
It's a wellknown (hardware) problem for HD2, not related to software(android/wm/wp/whatever).
SO my LEO came back from service, there is a part list that they changed:
- 54h20178-00M pre-assy key, key FPC, UF-KS, w/o Reg
- 74H01549-00M Chassis Pre-assy, black, stainless steel, MLRB81
- 76H04078-00M tape, FPC connector, kapton, MLRB81
- 83H00294-01 change 83H00233-01, 83H00294-03, 62H00065-B1M Sub-assy to 82H
maybe You need do the same...
Okay, so i just bought my 6th HD2, and this one got the lockscreen problem as well. If i lock the screen using the red power button and try to wake it up with the same red power button i found out that it doesn't work. I tried everything but i think i found a sort of workaround for the touchscreen problem.
1. Lock the screen as you normally do, with the red power button.
2. Wait at least more then 6 seconds with the screen off.
3. Now push the VOLUME UP button to make the device wake up.
4. Profit!
5. If it doesn't work, go back to 1 and try again.
I found out that if it works 1 time it will work multiple times in a row.
I'm on NAND but i think it works on SD aswell.
Please post your reactions to this.

Categories

Resources