Database Users

HTC HD2 Phone Problem

Hello all i have bought a new HTC HD2 phone 3 weeks ago and my friend put a new rom on it for me.
Everything was working fine till i put some foto's and music on the storage card, and i wanted to look and listen to them put suddenly i had nothing else on the storage card, everything was deleted.
And everytime when i turn my phone on i got a popup menu saying that i have to format the storage card, and my pc does not recconize anymore the disc drive, before it worked always perfectly.
So i formatted the starage card but the problem still exists.
I am realy very sad now and this is my last helpline, so i hope somebody can help me here with my problem.
Thanks already.
And i hope someone will have an answer for me.
Greetings Edwin

edwin45 said:
Hello all i have bought a new HTC HD2 phone 3 weeks ago and my friend put a new rom on it for me.
Everything was working fine till i put some foto's and music on the storage card, and i wanted to look and listen to them put suddenly i had nothing else on the storage card, everything was deleted.
And everytime when i turn my phone on i got a popup menu saying that i have to format the storage card, and my pc does not recconize anymore the disc drive, before it worked always perfectly.
So i formatted the starage card but the problem still exists.
I am realy very sad now and this is my last helpline, so i hope somebody can help me here with my problem.
Thanks already.
And i hope someone will have an answer for me.
Greetings Edwin
Click to expand...
Click to collapse
Have you tried to re-install the rom or install another?
Can transfer to phone via blue tooth or network considering your SD card isn't working.

try a hard reset mate might do the trick, it will just reset the phone to when the ROM was first put on the phone, restart the device before it boots push down volume up & down at the same time just follow instructions

i also got this problem with my memory card

phone issue?
i just put a android 2.33 rom on my hd2 and the phone wont work? is there something i can do? please advise.

peteamaro86 said:
i just put a android 2.33 rom on my hd2 and the phone wont work? is there something i can do? please advise.
Click to expand...
Click to collapse
Try bringing up MAGLDR by turn your HD2 off and then turn it back on but keep the power(end) button down and MAGLDR will come up then use hour volume up and down button to to scroll through the options. There is a recovery option select it and it will do what is equal to a hard reset of the Andriod on your phone. If this does not work try reflashing the Andriod ROM if still no Chang try another Andriod ROM. If still no dice out your Pbone into bootloader by turning it off and then teurning it back on but hold the volume down button when you tap the power button and keep holing it down until bootloader comes up once it is up plug your USB ito the computer and phone and wait until serial changes to USB in the white bar at the bottom of the screen and then flash a custom Windows Mobile ROM to your HD2. I say custom cause a official rom will wipe MAGLDR from your phone. Do not flash a official rom, especially don't flash a official ROM from your SD card as it will take wipe MAGLDR and revert your HSPL to SPL and then you will be back to complete stick and square one.

T-Macgnolia said:
Try bringing up MAGLDR by turn your HD2 off and then turn it back on but keep the power(end) button down and MAGLDR will come up then use hour volume up and down button to to scroll through the options. There is a recovery option select it and it will do what is equal to a hard reset of the Andriod on your phone. If this does not work try reflashing the Andriod ROM if still no Chang try another Andriod ROM. If still no dice out your Pbone into bootloader by turning it off and then teurning it back on but hold the volume down button when you tap the power button and keep holing it down until bootloader comes up once it is up plug your USB ito the computer and phone and wait until serial changes to USB in the white bar at the bottom of the screen and then flash a custom Windows Mobile ROM to your HD2. I say custom cause a official rom will wipe MAGLDR from your phone. Do not flash a official rom, especially don't flash a official ROM from your SD card as it will take wipe MAGLDR and revert your HSPL to SPL and then you will be back to complete stick and square one.
Click to expand...
Click to collapse
Thanks! It works now!

[Q] MAGLDR with broken "Volume down"

I just have a big Problem and hope someone can solve this for me. Thanks in advance.
The "Volume up" and "down" key of my HD2 ist not function after i replace the touchscreen, but this phone function no problem. I want to install Android in this but have not read carefully (My big fault). After i install MAGLDR v1.11 and reboot i cant choose another option except the first one (Boot AD SD).
1. I want to install winmo again but cant take the phone comeback to bootloader (cant use the down volume).
2. I try to copy the android to microsd card but all the android in Android folder and that cant begin with booting.
So what can i do now? pls help me.

bucvuong said:
I just have a big Problem and hope someone can solve this for me. Thanks in advance.
The "Volume up" and "down" key of my HD2 ist not function after i replace the touchscreen, but this phone function no problem. I want to install Android in this but have not read carefully (My big fault). After i install MAGLDR v1.11 and reboot i cant choose another option except the first one (Boot AD SD).
1. I want to install winmo again but cant take the phone comeback to bootloader (cant use the down volume).
2. I try to copy the android to microsd card but all the android in Android folder and that cant begin with booting.
So what can i do now? pls help me.
Click to expand...
Click to collapse
Impossible to launch Bootloader from Android, so i've no idea how you could acess to boot loader, the only one solution is that DFT release the V1.2 with bootloader option!

you are screwed. how do your buttons not work. if they are broken because of a hardware problem then why not just go ahead and get another phone why put up with that hassle forever
Sent from my HTC HD2 using XDA App

I am sorry to hear of unfortunate situation.
Sent from my HTC HD2 using XDA App

when i fixed the touchscreen, the connect to touchscreen is broken.
now, how can i make a new android in microsd card to start with MAGLDR with "Boot AD SD"?
Or have any programm in windows to take HD2 to boot loader?
Thanks

bucvuong said:
when i fixed the touchscreen, the connect to touchscreen is broken.
now, how can i make a new android in microsd card to start with MAGLDR with "Boot AD SD"?
Or have any programm in windows to take HD2 to boot loader?
Thanks
Click to expand...
Click to collapse
afaik you can can enter bootloader by pressing END button and Reset Button at the same time..

lesjaw said:
afaik you can can enter bootloader by pressing END button and Reset Button at the same time..
Click to expand...
Click to collapse
I try to pressing End Button and Reset Button, but nothing happen, that just restart my HD2. Or how can i press the both of Button in the right way?
So anyone have another Idee?
Ps: Have the android rom boot with magldr yet?

HTC HD2 6.5 to Android back to 6.5 or 7?

I got this phone on Ebay because I am poor. It was a T Mobile unlocked that was changed to Android. I can't get rid of the old user name and don't have the password for the Android market account set up on this phone. I can't do a factory reset and I need help. I would prefer to put 7 on it but I would be happy putting 6.5 back. Android would do if I could reset the user account. I do hope someone can help me. I am not very technically gifted but I can follow easy instructions. Please help me.
Judy

Because you are new at this I suggest flashing the stock T Mobile from your SD card. It is the simplest and safest thing to do.
You may need the Serial and IMEI numbers located under the phones battery.
1. Make sure your microSD is Formatted to fat32
2. Go to T Mobile web site and download the rom. It will ask for you IMEI number this makes sure the rom is for your mobile.
3. Unzip/unrar the downloaded file into a folder on your PC
4. Rename the RUU_signed.nbh file to LEOIMG.nbh
5. Copy the LEOIMG.nbh file to the root of your MicroSD Card
6. Plug the MicroSD Card into the phone
7. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
8. Follow the On Screen instructions to start the update
9. After flash has completed, press the reset button with the stylus to reset the device.

What if you want to flash it without using the SD card? I flashed android using NAND but I want to put WM 6.5 back.

oscar0324 said:
What if you want to flash it without using the SD card? I flashed android using NAND but I want to put WM 6.5 back.
Click to expand...
Click to collapse
I think doing it with the SD card is only way to get back to 6.5.

You could always boot into the boot loader by holding the up volume and power key then flash a 6.5 Rom.
Sent from my HTC HD2 using XDA App

GaryOG said:
Because you are new at this I suggest flashing the stock T Mobile from your SD card. It is the simplest and safest thing to do.
You may need the Serial and IMEI numbers located under the phones battery.
1. Make sure your microSD is Formatted to fat32
2. Go to T Mobile web site and download the rom. It will ask for you IMEI number this makes sure the rom is for your mobile.
3. Unzip/unrar the downloaded file into a folder on your PC
4. Rename the RUU_signed.nbh file to LEOIMG.nbh
5. Copy the LEOIMG.nbh file to the root of your MicroSD Card
6. Plug the MicroSD Card into the phone
7. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
8. Follow the On Screen instructions to start the update
9. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
I have spent hours looking and I just can't find the old version of the software. I will continue to look but if anyone has a link please help the IMEI 357779035940129
If i do this will I have to unlock it again for AT&T?

Stormynights said:
I have spent hours looking and I just can't find the old version of the software. I will continue to look but if anyone has a link please help the IMEI 357779035940129
If i do this will I have to unlock it again for AT&T?
Click to expand...
Click to collapse
Try this
http://xdafil.es/HD2/TMOUS/RUU_Leo_...dio_Signed_15.39.50.07U_2.10.50.26_2_Ship.zip
I do not no If you have to unlock it again for AT&T.
Cheers

GaryOG said:
Try this
http://xdafil.es/HD2/TMOUS/RUU_Leo_...dio_Signed_15.39.50.07U_2.10.50.26_2_Ship.zip
I do not no If you have to unlock it again for AT&T.
Cheers
Click to expand...
Click to collapse
Thank you so much for the link.

stop!!!!!!!!
Everyone has forgotten to find out what device this is, t mobile are all over the place and some ship 1024MB versions, don't flash anything until you work what you need, flashing incorrect tmobile roms could give you a really bad day and an expensive paperweight

I tried the data cable first and it won't sync with active sync because it is at this time android. It just isn't recognized as anything but a usb storage device. Then I tried the card. I put all the files on the card according to the directions and hit the volume down button and the power button and nothing happens. I then have to remove the battery to turn it back on. The screen that comes up when I first start the phone is dark forces team. There has to be a way to do this.

You have to be holding vol down before u even press the power button, then press the power button simultaneously. U should see a tri-color screen then connect your usb to pc and flash the 6.5 ROM
Make sure u start with the phone off
Sent from my HTC Desire using XDA App

[email protected] said:
You have to be holding vol down before u even press the power button, then press the power button simultaneously. U should see a tri-color screen then connect your usb to pc and flash the 6.5 ROM
Make sure u start with the phone off
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
When I take the battery out and then hold down the volume and press the power button I get that multi screen and I got to the USB then nothing else happens. What am I missing?

dazza9075 said:
stop!!!!!!!!
Everyone has forgotten to find out what device this is, t mobile are all over the place and some ship 1024MB versions, don't flash anything until you work what you need, flashing incorrect tmobile roms could give you a really bad day and an expensive paperweight
Click to expand...
Click to collapse
WHY?

OMG I did it. I can't wait till my grand kids find out how cool I am now. Thank you to everyone that helped me.

Stormynights said:
I tried the data cable first and it won't sync with active sync because it is at this time android. It just isn't recognized as anything but a usb storage device. Then I tried the card. I put all the files on the card according to the directions and hit the volume down button and the power button and nothing happens. I then have to remove the battery to turn it back on. The screen that comes up when I first start the phone is dark forces team. There has to be a way to do this.
Click to expand...
Click to collapse
I had a few attempts before I got it so try again.
It worked for me with a 16GB card.
Turn off your mobile.
Hold the Volume Down and End Call (power) buttons at the same time.
When "Searching" appears on the screen, release the Volume Down button.
This guide may help. But ignore the things about custom ROM’s and HSPL for now.
http://forum.xda-developers.com/showthread.php?t=681317

ok, there are two versions of the HD2, one with 512MB one with 1024MB, some t-mobile US phones (TMOUS) have 1024MB, if you ge the wrong ROM you could potentially bugger your device
for instance, flash a ROM with a unsupported radio on your device than game over....potentially
if you have a TMOUS 1024MB HD2
flash to .51 radio an its screwed
flash to .50 radio an its ok, except 2.05.50.x radio which will screw it
and stick to TMOUS ROMS as well
if you have the regular world wide version we can flash to what ever we like
its important to find out what someone is using before recomending them to flash any WM6.5 ROM because if by chance that ROM contains an incorrect radio version for that hardware then its game over.

[Q] lockscreen freeze issue

I've searched the forums and have not been able to anything that addresses this issue.
I'm running an Android Nand ROM, this is my second Nand. Ran SD versions previously. This issue began with the first Nand and continues with the second.
When the phone boots the lockscreen will function exactly once. If the screen is allowed to go to sleep or put to sleep with the end button, the lockscreen is frozen and requires a battery pull to function again (again, exactly once). Hard buttons continue to work. Hitting the send key will get me into the dialer, and from there the home key will get me to the home screen, but at that point the home screen is frozen.
I don't think it's a battery or mainboard issue, but I could be wrong. Tried to run Task 29 with no luck. Can't connect to PC to flash a windows ROM (thought that formatting SD card might help). Removed the SD card, which did not change anything.
Any help with this issue would be most appreciated
Edit. I discovered that if I use the hard send key it will wake the lockscreen which will then function delivering me to the home screen which also functions properly. Problem appear to be associated with the hard end key only.
Edit 3/19/2011: This is a hardware issue:
http://forum.xda-developers.com/showthread.php?t=893037&highlight=lockscreen+freeze
I've determined that any hard key other than the end key will wake the lockscreen which will then function properly. It appears that the end key is either worn out or has something going on under the button such as dirt build up or bent connections. Will attempt to disassemble and correct. Will report back after.

Ok here is my sugestions and advice. First try a master/hard reset of your Andriod ROM. To do this cut your HD2 off then press and bold down the power button until the main menu of MAGLDR comes up. Then use the volume up and down buttons to scroll through the options until you see recovery and select it. This will preform a reset of your ROM.
If that does not fix your problem you can try flashing a different Andriod ROM.
If you still have the problem you can preform a task 29 by turning the phone off and putting your phone into bootloader. To do this turn the phone off and hold the volume down button down and tap the power button but continue to hold down the volume down button until you see the muticolor bootloader screen come up. Plug your phone into a computer via USB cable and wait for the Serial in the white bar at the bottom of the phone screen to change to USB. Then run the task 29. By the way unless you flash a Window Mobile ROM via SD card this is the best way to flash a Windows Mobile ROM, HSPL, MAGLDR, or run task 29.
Once you ha e run a task 29 (or not it is your decission) you can either reflash MAGLDR and flash a Andriod ROM again (Not sure if you will have to reflash MAGLDR or not after you run task 29 so check and see if you still have it by powering off and holding the power button down.) Or you can flash a Windows Mobile ROM by the above steps to put it in bootloader and flashing. Or you can use ASDa card to flash a Windows Mobile ROM. If you use this method and flash a official ROM it will revert your SPL back to stock and you will lose MAGLDR, if you flash a official ROM via USB you will lose MAGLDR but not nessaraly HSPL, you will just have to go into bootloader to check that. Anyway use a 4GB or smaller SD card and make sure it is formated with Fat 32 and then download a Windows Mobile ROM. If the ROM shows up as a .exe when you extract it from the zip file then rename the .exe to .zip and right click the file if it is not a .exe then just right click it. When you right click the file it will pop up a box with options select view or explore wich ever one you see and look for the file with .nbh at the end and rename it to leoimg.nbh. then copy the file to the SD card and insert the SD card in your pbone. put your phone into bootloader but keep the volume down button held down until you see searching on your phone screen and then release the volume down button and the ROM will flash.
Hope this helps.

Thanks!
Thanks T-Macgnolia. I will try this sequence tonight. I did discover a workaround (see my edit of original post). It appears the problem is solely associated with the hard end key. Still not sure if its a hardware or software issue. But should have a better idea after I try your suggestions.

pixel_eater said:
Thanks T-Macgnolia. I will try this sequence tonight. I did discover a workaround (see my edit of original post). It appears the problem is solely associated with the hard end key. Still not sure if its a hardware or software issue. But should have a better idea after I try your suggestions.
Click to expand...
Click to collapse
I have the same problem with the hard end key for about 2 weeks. Now it's not working with all hard keys.

[Q] windows mobile 7 wont load

Hi, I am hoping someone can help me. I am having trouble booting back into windows mobile 7 after switching my phone off for the first time since install.
Having never done anything like this before I followed the instructions closely making sure I had the correct spl, hspl2, the correct magldr, radio etc.
7 was working perfectly. My problems only started when I realised I forgot to put my sd card in before install, following instructions I found on another thread it was suggested that I remove the battery insert sd card and turn phone back on etc. However I can’t turn the phone back on, the only thing I can do is hold down the volume key and the red button to get the red/green/blue/white – screen.
Does anyone have any suggestions on how to resolve this problem? Have I bricked my phone?
Sorry if a similar query has already been posted. I would appreciate any help, thanks!

Can you boot into MAGLDR and reflash? Hold down the power button from off and select option 5.

No. I can't get the MAGLDR screen to load, the only thing that happens when i hold the power button is a small vibration but nothing loads.

tjr2011 said:
No. I can't get the MAGLDR screen to load, the only thing that happens when i hold the power button is a small vibration but nothing loads.
Click to expand...
Click to collapse
Probably you need to reflash magldr....And the rom....start over from the begining
here is the thread to follow if you want and android on sd card
http://forum.xda-developers.com/showthread.php?t=944288
http://forum.xda-developers.com/showthread.php?t=945565
And here the magldr thread
http://forum.xda-developers.com/showthread.php?p=10197474
Importand: Follow the instructions to the letter.

I can reflash magldr, but the phone still wont power on or load the magldr menu screen