I've searched the forums and have not been able to anything that addresses this issue.
I'm running an Android Nand ROM, this is my second Nand. Ran SD versions previously. This issue began with the first Nand and continues with the second.
When the phone boots the lockscreen will function exactly once. If the screen is allowed to go to sleep or put to sleep with the end button, the lockscreen is frozen and requires a battery pull to function again (again, exactly once). Hard buttons continue to work. Hitting the send key will get me into the dialer, and from there the home key will get me to the home screen, but at that point the home screen is frozen.
I don't think it's a battery or mainboard issue, but I could be wrong. Tried to run Task 29 with no luck. Can't connect to PC to flash a windows ROM (thought that formatting SD card might help). Removed the SD card, which did not change anything.
Any help with this issue would be most appreciated
Edit. I discovered that if I use the hard send key it will wake the lockscreen which will then function delivering me to the home screen which also functions properly. Problem appear to be associated with the hard end key only.
Edit 3/19/2011: This is a hardware issue:
http://forum.xda-developers.com/showthread.php?t=893037&highlight=lockscreen+freeze
I've determined that any hard key other than the end key will wake the lockscreen which will then function properly. It appears that the end key is either worn out or has something going on under the button such as dirt build up or bent connections. Will attempt to disassemble and correct. Will report back after.
Ok here is my sugestions and advice. First try a master/hard reset of your Andriod ROM. To do this cut your HD2 off then press and bold down the power button until the main menu of MAGLDR comes up. Then use the volume up and down buttons to scroll through the options until you see recovery and select it. This will preform a reset of your ROM.
If that does not fix your problem you can try flashing a different Andriod ROM.
If you still have the problem you can preform a task 29 by turning the phone off and putting your phone into bootloader. To do this turn the phone off and hold the volume down button down and tap the power button but continue to hold down the volume down button until you see the muticolor bootloader screen come up. Plug your phone into a computer via USB cable and wait for the Serial in the white bar at the bottom of the phone screen to change to USB. Then run the task 29. By the way unless you flash a Window Mobile ROM via SD card this is the best way to flash a Windows Mobile ROM, HSPL, MAGLDR, or run task 29.
Once you ha e run a task 29 (or not it is your decission) you can either reflash MAGLDR and flash a Andriod ROM again (Not sure if you will have to reflash MAGLDR or not after you run task 29 so check and see if you still have it by powering off and holding the power button down.) Or you can flash a Windows Mobile ROM by the above steps to put it in bootloader and flashing. Or you can use ASDa card to flash a Windows Mobile ROM. If you use this method and flash a official ROM it will revert your SPL back to stock and you will lose MAGLDR, if you flash a official ROM via USB you will lose MAGLDR but not nessaraly HSPL, you will just have to go into bootloader to check that. Anyway use a 4GB or smaller SD card and make sure it is formated with Fat 32 and then download a Windows Mobile ROM. If the ROM shows up as a .exe when you extract it from the zip file then rename the .exe to .zip and right click the file if it is not a .exe then just right click it. When you right click the file it will pop up a box with options select view or explore wich ever one you see and look for the file with .nbh at the end and rename it to leoimg.nbh. then copy the file to the SD card and insert the SD card in your pbone. put your phone into bootloader but keep the volume down button held down until you see searching on your phone screen and then release the volume down button and the ROM will flash.
Hope this helps.
Thanks!
Thanks T-Macgnolia. I will try this sequence tonight. I did discover a workaround (see my edit of original post). It appears the problem is solely associated with the hard end key. Still not sure if its a hardware or software issue. But should have a better idea after I try your suggestions.
pixel_eater said:
Thanks T-Macgnolia. I will try this sequence tonight. I did discover a workaround (see my edit of original post). It appears the problem is solely associated with the hard end key. Still not sure if its a hardware or software issue. But should have a better idea after I try your suggestions.
Click to expand...
Click to collapse
I have the same problem with the hard end key for about 2 weeks. Now it's not working with all hard keys.
Related
I desperately need an alternative way to hard reset my hd2. Holding the up down button and shortly pressing the on/off button just switches the phone on. No reset. btw I cant start up normally so the software approach doesn't wort either.
Peter65nl said:
I desperately need an alternative way to hard reset my hd2. Holding the up down button and shortly pressing the on/off button just switches the phone on. No reset. btw I cant start up normally so the software approach doesn't wort either.
Click to expand...
Click to collapse
Use the reset button on back whilst holding up/down buttons
a few people have commented on the difficulty of getting both up and down pressed correctly.
I find I get a much better press with the battery cover off, and I press one first, then the second.that way you can feel them connect individually.
Why don't you guys use the build in software to hard re-set the devise.
1] Press Star Icon
2] Press Setting Icon
3] Press System Icon
4] Press Clear Storage Icon
That should start a hard re-set on device and re-store everything back to original configuration.
maniep said:
Why don't you guys use the build in software to hard re-set the devise.
1] Press Star Icon
2] Press Setting Icon
3] Press System Icon
4] Press Clear Storage Icon
That should start a hard re-set on device and re-store everything back to original configuration.
Click to expand...
Click to collapse
why don't you read the opening first again?
the dude can't use the software approach because his windows won't start, remember?
what about using task 29 or the reflash original splash screen while its doing its thing you can use both hands to hold the vol buttons, other than anything else suggested i dont thinj there us another way to hard reset other than reinstalling your rom maybe fix the software wipe storage app.
That works!
11calcal said:
Use the reset button on back whilst holding up/down buttons
Click to expand...
Click to collapse
Thanks, finally got the thing going again.
I have the same exact problem. None of these methods are working for me. Is there anthing else I can do?
Same for me. Locked out of the phone completely. When it boots it only gets as far as the O2 start up screen and doesn't get any further. Hard and soft reset do nothing. Have tried all suggested here already.
When I get to the screen where I'm prompted to press Volume up to restore, it goes straight to 'restore completed' in a fraction of a second, then back to the start up screen when I press Volume up again.
Need help as I now have an HTC paperweight and no phone!
sonicuk said:
Same for me. Locked out of the phone completely. When it boots it only gets as far as the O2 start up screen and doesn't get any further. Hard and soft reset do nothing. Have tried all suggested here already.
When I get to the screen where I'm prompted to press Volume up to restore, it goes straight to 'restore completed' in a fraction of a second, then back to the start up screen when I press Volume up again.
Need help as I now have an HTC paperweight and no phone!
Click to expand...
Click to collapse
Been using magldr? Cos hard resetting with magldr installed just affects magldr, hence a very short reset time that does nothing.
samsamuel said:
Been using magldr? Cos hard resetting with magldr installed just affects magldr, hence a very short reset time that does nothing.
Click to expand...
Click to collapse
No, I don't even know what that is. I'm not very technical and all I had installed was Cookie's Home Tab Editor.
I have the same problem.
My HTC is blocked ( the WM "forgot" the password that I set - a common problem ), so I have to do a Hard Reset that doesn't start.
I can't reflash or do anything else ( as told here ) without instaling HSPL first. As this can only be installed by the Active Sync, and Active Sync doesn't connect to blocked phones, I can't do anything else...
Is there a way to do anything else with only a new ROM in the sd card ? Or I REALLY have to install HSPL first ?
Thanks,
Leo
leodino said:
Is there a way to do anything else with only a new ROM in the sd card ? Or I REALLY have to install HSPL first ?
Click to expand...
Click to collapse
It is possible to be stitched from a SD-card without reinsertion HSPL. It is desirable to stitch official ROM
It is desirable SD-card to format a feather an insertion.
After freezing my device I tried to open but not opened then I tried to make soft reset again it didnt open then I tried hard reset but the normal menu didnt come instead the menu which is attached appear and telling something serial but not doing hard set now I dont know what I must do Please help
http://img594.imageshack.us/img594/2927/imga0024.jpg
http://img208.imageshack.us/img208/1889/imga0025n.jpg
Thats your bootloader.....
to do a hard reset its...
hold down volume up and volume down
tap and release power
keep holding both volume buttons down....
I think whats happening is that your only holding the volume down.
Try taking your battery cover off to get a better press and making sure that up and down are held, then tap the power button.........
hope that helps.....
help
Thanks for explanation but it is stilll not working and in addition today for solving this problem I tried to reinstall rom using cd card this case it is waiting at the (loading ) stage I dont know how can I solve this problem
Had any luck yet?...........
Ok, few more questions.......
What rom did you try to flash via sd card?
What rom were you using before it crashed?
Is it a tmous hd2 (green and red buttons?) or a "normal one"?
What happened to make it freeze crash?
Can you still get to bootloader? (the screen you posted above)
If you can then go to that screen and connect your phone via usb......
wait a few mins and let us know if the word "serial" at the bottom of the screen changes to "usb"........
If it does you should be able to flash a rom via your computer......
thanks for your help but Still I am not lucky
What rom did you try to flash via sd card?
WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship(2).exe
What rom were you using before it crashed?
HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship.exe
Is it a tmous hd2 (green and red buttons?) or a "normal one"?
Yes Normal one
What happened to make it freeze crash?
nothing only I have re install sprite and rim backups (whic I had before) it started normally and while working freezed I closed and not opened it is staying and wait at (HTC guietly brillant ) stage
Can you still get to bootloader? (the screen you posted above)
Yes I can
http://rapidshare.com/files/409788656/serial.JPG
http://rapidshare.com/files/409788686/usb.JPG
If you can then go to that screen and connect your phone via usb......
wait a few mins and let us know if the word "serial" at the bottom of the screen changes to "usb"........
as seen above links I can connect as you describe
If it does you should be able to flash a rom via your computer.....
Unfortunatelly I can not I tried everything flashing rom, radio ,and task 29 in every case it not started wait as seen picture (only hspl worked)
http://rapidshare.com/files/409788488/pc1.JPG
http://rapidshare.com/files/409788523/pc2.JPG
and give connection error
http://rapidshare.com/files/409788826/pcer.JPG
if I had tried flash rom from sd card then freezing at loading stage
http://rapidshare.com/files/409788629/sd_card.JPG
during this time I learned many things ) but still my knowledge not enough to solve this problem please help !!!
ok have a look at this thread and see how you get on
forum.xda-developers.com/showthread.php?t=298516
try uninstalling actvesync from your pc...... then reinstalling it
would you be able to try and flash on someone elses pc?
im not sure if this would help or not but im running out of ideas im afraid....
My friend, if the phone starts at all you definitely should be able to do HARD RESET.
You are probably not doing well the hard reset. You cannot destroy bootloader with backup programs.
You should :
-hold pressed volume up and volume down buttons
-tap and release power button
-keep holding both volume buttons down for several more seconds until three color screen appears and shortly after that a message will appear on lite blue screen. Then release both volume buttons. Then press volume up button, usually it is necessary to press it once again. System restoring bar will begin to raise up to 100%. After that pres again volume up and system will restart.
By the way your initial rom is 1.66 but on the pictures is 1.48. So you did pictures after you flashed it. Also noted that you have flashed HSPL.
Suggest to download your initial original rom and install it from the memory card. Not sure but may be downgrade of the rom is not possible from 1.66 to 1.44.
I solved my problem
Thanks to masters very much I reinstall active sync and then I flash rom and all my problems cancelled out )
nice one, glad you got it fixed.....
kuwait said:
My friend, if the phone starts at all you definitely should be able to do HARD RESET.
You are probably not doing well the hard reset. You cannot destroy bootloader with backup programs.
You should :
-hold pressed volume up and volume down buttons
-tap and release power button
-keep holding both volume buttons down for several more seconds until three color screen appears and shortly after that a message will appear on lite blue screen. Then release both volume buttons. Then press volume up button, usually it is necessary to press it once again. System restoring bar will begin to raise up to 100%. After that pres again volume up and system will restart.
Click to expand...
Click to collapse
After bricking my phone, then my underpants ^^... you sir are a lifesaver.
thank you very much.
Thanks to masters very much I reinstall active sync and then I flash rom and all my problems cancelled out
bootloader problem
conantroutman said:
Had any luck yet?...........
Ok, few more questions.......
What rom did you try to flash via sd card?
What rom were you using before it crashed?
Is it a tmous hd2 (green and red buttons?) or a "normal one"?
What happened to make it freeze crash?
Can you still get to bootloader? (the screen you posted above)
If you can then go to that screen and connect your phone via usb......
wait a few mins and let us know if the word "serial" at the bottom of the screen changes to "usb"........
If it does you should be able to flash a rom via your computer......
Click to expand...
Click to collapse
I can get the bootloader but it keeps showing "serial" even after connecting it to to the computer.
the "usb" does not come and i cannot update the rom
currently i'm using hyperdroid GBX v11 which is working fine (just one problem that it shows blank screen after a call ends and no display till another call comes) please help
mirchandani84 said:
I can get the bootloader but it keeps showing "serial" even after connecting it to to the computer.
the "usb" does not come and i cannot update the rom
currently i'm using hyperdroid GBX v11 which is working fine (just one problem that it shows blank screen after a call ends and no display till another call comes) please help
Click to expand...
Click to collapse
Hmmm......
Try, using another USB port or computer.
Reinstall activesync.
Have you tried flashing from SD card?
Sent from my fingers to your face...
same problem
kuwait said:
By the way your initial rom is 1.66 but on the pictures is 1.48. So you did pictures after you flashed it. Also noted that you have flashed HSPL.
Suggest to download your initial original rom and install it from the memory card. Not sure but may be downgrade of the rom is not possible from 1.66 to 1.44.
Click to expand...
Click to collapse
i have the same problem, and my information on the screen is
PB81120 SSB3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
any help? im hard rebooting cause idk the pasword and i cant get on the phone:crying::crying::crying:
To all of you having the "same problem"
If you are 100% sure your stock rom is correct. rename the .nbh file to LEOIMG.NBH, put it on the root of your SD card, and boot into bootloader, it will flash.
IF YOU ARE UNSURE IF YOUR STOCK IS CORRECT POST HERE FIRST OR YOU MAY BRICK YOUR PHONE,
better to look noob than to brick, there are too many versions of this phone to mess around here.
same problem and a bootloop
omranlibanon said:
same problem and a bootloop
Click to expand...
Click to collapse
Did you flash stock via SD?
yes i flashed via sd card its a nand rom TBD_Sensation_XL_Gen3_stock_V3.7
I got this phone on Ebay because I am poor. It was a T Mobile unlocked that was changed to Android. I can't get rid of the old user name and don't have the password for the Android market account set up on this phone. I can't do a factory reset and I need help. I would prefer to put 7 on it but I would be happy putting 6.5 back. Android would do if I could reset the user account. I do hope someone can help me. I am not very technically gifted but I can follow easy instructions. Please help me.
Judy
Because you are new at this I suggest flashing the stock T Mobile from your SD card. It is the simplest and safest thing to do.
You may need the Serial and IMEI numbers located under the phones battery.
1. Make sure your microSD is Formatted to fat32
2. Go to T Mobile web site and download the rom. It will ask for you IMEI number this makes sure the rom is for your mobile.
3. Unzip/unrar the downloaded file into a folder on your PC
4. Rename the RUU_signed.nbh file to LEOIMG.nbh
5. Copy the LEOIMG.nbh file to the root of your MicroSD Card
6. Plug the MicroSD Card into the phone
7. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
8. Follow the On Screen instructions to start the update
9. After flash has completed, press the reset button with the stylus to reset the device.
What if you want to flash it without using the SD card? I flashed android using NAND but I want to put WM 6.5 back.
oscar0324 said:
What if you want to flash it without using the SD card? I flashed android using NAND but I want to put WM 6.5 back.
Click to expand...
Click to collapse
I think doing it with the SD card is only way to get back to 6.5.
You could always boot into the boot loader by holding the up volume and power key then flash a 6.5 Rom.
Sent from my HTC HD2 using XDA App
GaryOG said:
Because you are new at this I suggest flashing the stock T Mobile from your SD card. It is the simplest and safest thing to do.
You may need the Serial and IMEI numbers located under the phones battery.
1. Make sure your microSD is Formatted to fat32
2. Go to T Mobile web site and download the rom. It will ask for you IMEI number this makes sure the rom is for your mobile.
3. Unzip/unrar the downloaded file into a folder on your PC
4. Rename the RUU_signed.nbh file to LEOIMG.nbh
5. Copy the LEOIMG.nbh file to the root of your MicroSD Card
6. Plug the MicroSD Card into the phone
7. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
8. Follow the On Screen instructions to start the update
9. After flash has completed, press the reset button with the stylus to reset the device.
Click to expand...
Click to collapse
I have spent hours looking and I just can't find the old version of the software. I will continue to look but if anyone has a link please help the IMEI 357779035940129
If i do this will I have to unlock it again for AT&T?
Stormynights said:
I have spent hours looking and I just can't find the old version of the software. I will continue to look but if anyone has a link please help the IMEI 357779035940129
If i do this will I have to unlock it again for AT&T?
Click to expand...
Click to collapse
Try this
http://xdafil.es/HD2/TMOUS/RUU_Leo_...dio_Signed_15.39.50.07U_2.10.50.26_2_Ship.zip
I do not no If you have to unlock it again for AT&T.
Cheers
GaryOG said:
Try this
http://xdafil.es/HD2/TMOUS/RUU_Leo_...dio_Signed_15.39.50.07U_2.10.50.26_2_Ship.zip
I do not no If you have to unlock it again for AT&T.
Cheers
Click to expand...
Click to collapse
Thank you so much for the link.
stop!!!!!!!!
Everyone has forgotten to find out what device this is, t mobile are all over the place and some ship 1024MB versions, don't flash anything until you work what you need, flashing incorrect tmobile roms could give you a really bad day and an expensive paperweight
I tried the data cable first and it won't sync with active sync because it is at this time android. It just isn't recognized as anything but a usb storage device. Then I tried the card. I put all the files on the card according to the directions and hit the volume down button and the power button and nothing happens. I then have to remove the battery to turn it back on. The screen that comes up when I first start the phone is dark forces team. There has to be a way to do this.
You have to be holding vol down before u even press the power button, then press the power button simultaneously. U should see a tri-color screen then connect your usb to pc and flash the 6.5 ROM
Make sure u start with the phone off
Sent from my HTC Desire using XDA App
[email protected] said:
You have to be holding vol down before u even press the power button, then press the power button simultaneously. U should see a tri-color screen then connect your usb to pc and flash the 6.5 ROM
Make sure u start with the phone off
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
When I take the battery out and then hold down the volume and press the power button I get that multi screen and I got to the USB then nothing else happens. What am I missing?
dazza9075 said:
stop!!!!!!!!
Everyone has forgotten to find out what device this is, t mobile are all over the place and some ship 1024MB versions, don't flash anything until you work what you need, flashing incorrect tmobile roms could give you a really bad day and an expensive paperweight
Click to expand...
Click to collapse
WHY?
OMG I did it. I can't wait till my grand kids find out how cool I am now. Thank you to everyone that helped me.
Stormynights said:
I tried the data cable first and it won't sync with active sync because it is at this time android. It just isn't recognized as anything but a usb storage device. Then I tried the card. I put all the files on the card according to the directions and hit the volume down button and the power button and nothing happens. I then have to remove the battery to turn it back on. The screen that comes up when I first start the phone is dark forces team. There has to be a way to do this.
Click to expand...
Click to collapse
I had a few attempts before I got it so try again.
It worked for me with a 16GB card.
Turn off your mobile.
Hold the Volume Down and End Call (power) buttons at the same time.
When "Searching" appears on the screen, release the Volume Down button.
This guide may help. But ignore the things about custom ROM’s and HSPL for now.
http://forum.xda-developers.com/showthread.php?t=681317
ok, there are two versions of the HD2, one with 512MB one with 1024MB, some t-mobile US phones (TMOUS) have 1024MB, if you ge the wrong ROM you could potentially bugger your device
for instance, flash a ROM with a unsupported radio on your device than game over....potentially
if you have a TMOUS 1024MB HD2
flash to .51 radio an its screwed
flash to .50 radio an its ok, except 2.05.50.x radio which will screw it
and stick to TMOUS ROMS as well
if you have the regular world wide version we can flash to what ever we like
its important to find out what someone is using before recomending them to flash any WM6.5 ROM because if by chance that ROM contains an incorrect radio version for that hardware then its game over.
I need help if anyone knows.
friend somehow managed to screw up your hd2. Artemis is injected into a rom, I think it was based on 3.14. HSPL previously done, it seems that something is not coincidence and not the phone can not start. that turns the gray screen that says
Flash type5510BCAD
Power Reason 6
BOOTUP_W_WARM_RESET
After a few seconds starts to rise wm that appears yellow screen on which writes the windows and knocks.
I tried different ROMs oficial and cooked, the PCIJ and the SD, Task 29 and nothing fails. go per cent during the installation and just get out of it. SD will not even try.
If someone has an idea
thanks
Its hard to fully understand whats happening with the phone from your descriptiond
Try removing the sd card, task 29 then a stock rom from.
As the phone boots, I don't think its a major issue
johnerz said:
Its hard to fully understand whats happening with the phone from your descriptiond
Try removing the sd card, task 29 then a stock rom from.
As the phone boots, I don't think its a major issue
Click to expand...
Click to collapse
I am with member jobnerz on this one. It is a little hard to fully understand your issue here but I think I know what you are saying. As mentioned above put your HD2 into bootloaded by turning the Pbone off and holding the volume down button and briefly pressing the power button but keep the volume down button pressed until you see the bootloader appear.Connect you HD2 to the computer via USB cable and wait until you see the serial in the bottom white bar on your phone screen change to USB. When you see USB run a task 29. Then cut the obone off and put it back into bootloader and wait for the USB at the bottom again then flash the ROM you want.
n__mil said:
I need help if anyone knows.
friend somehow managed to screw up your hd2. Artemis is injected into a rom, I think it was based on 3.14. HSPL previously done, it seems that something is not coincidence and not the phone can not start. that turns the gray screen that says
Flash type5510BCAD
Power Reason 6
BOOTUP_W_WARM_RESET
After a few seconds starts to rise wm that appears yellow screen on which writes the windows and knocks.
I tried different ROMs oficial and cooked, the PCIJ and the SD, Task 29 and nothing fails. go per cent during the installation and just get out of it. SD will not even try.
If someone has an idea
thanks
Click to expand...
Click to collapse
I'm sorry,but it maybe physical problem. It seems like it out of memory ic's, because after flash device goes to same status "Flash type5510BCAD...." Try to flash several times also using sd card, maybe this will help
Hi, I am hoping someone can help me. I am having trouble booting back into windows mobile 7 after switching my phone off for the first time since install.
Having never done anything like this before I followed the instructions closely making sure I had the correct spl, hspl2, the correct magldr, radio etc.
7 was working perfectly. My problems only started when I realised I forgot to put my sd card in before install, following instructions I found on another thread it was suggested that I remove the battery insert sd card and turn phone back on etc. However I can’t turn the phone back on, the only thing I can do is hold down the volume key and the red button to get the red/green/blue/white – screen.
Does anyone have any suggestions on how to resolve this problem? Have I bricked my phone?
Sorry if a similar query has already been posted. I would appreciate any help, thanks!
Can you boot into MAGLDR and reflash? Hold down the power button from off and select option 5.
No. I can't get the MAGLDR screen to load, the only thing that happens when i hold the power button is a small vibration but nothing loads.
tjr2011 said:
No. I can't get the MAGLDR screen to load, the only thing that happens when i hold the power button is a small vibration but nothing loads.
Click to expand...
Click to collapse
Probably you need to reflash magldr....And the rom....start over from the begining
here is the thread to follow if you want and android on sd card
http://forum.xda-developers.com/showthread.php?t=944288
http://forum.xda-developers.com/showthread.php?t=945565
And here the magldr thread
http://forum.xda-developers.com/showthread.php?p=10197474
Importand: Follow the instructions to the letter.
I can reflash magldr, but the phone still wont power on or load the magldr menu screen