i use taboonay rom,it is a good one.
but,tonight,when i update it ,from 1.02 to 1.03.
wifi error.
it just show error under wifi setting.
so ,i flash back to 1.02,it is ok now.
i want to know is that my problem or the rom`s?
Fixed, download the file again.
Related
ok i've done a bit of searching and i'm pretty sure its software related.
i got an mda pro from when i booted the phone up its had a o2 splash screen, so im assuming its had its software updated. so the phone works fine for about 6 hours or so but then it starts tt freeze up, propgrams stop responding and the phone wont do any thing. i left the phone like this for a few moments then i got a txt and the phone seamed to be working fine untill i went to use the camera and i got "the file camera cannot be opened. either it is not signed with a trusted cert or one of its components can not be found you might need to reinstall or restore this file".
ok so i had a look and found the Available Universal Versions and Upgrades
the thing is i'm not sure which is the best to use or how to do it.
what would you guys recomend i do ?
thanks
MDA Pro with O2 Rom?
Seems so that there is other Rom on it. Normally, this is not a Problem, but who knows, what was changed in this Rom.
I would recommend to download new Rom and install this.
Try http://www.my-xda.com/xdaexec_soft.html
Thats got the latest XDA update.... give it a go and then get the new 1.09.00 radio update too...
Hopefully that will sort you out!
chears i'll give that one a go and see what happpens. fingers crossed
ok so i downloaded the Xda Exec ROM v 1.13.188 from the above site followed the directions in the pdf file, connected the phone and made sure there arnt any programs running in the backgroung. when i try to runn the application to do the upgrade it says its trying to connect to the phone then gives
"error 201: get device data error
can not get device data
please make sure device is connected and run this update utility again"
only problem is that it is connected or so ms active sync says.
any ideas whats goign on or is there another way to update the software ?
thanks guys its apreciated
ok so i managed to get past that stage but
now i get
error 102 ce image file check sum error
the rom image file to be used for the update is corroupt. please download the correct device software update utility and try again.
i have no idea what that means any sugestions ?
@cusaeng, can't help with the ROM update but your initial problem of problems after 6 hours is typical of the Universal when its running low on RAM. Use an app like GSPMaigc+ which can really close processes and reboot once a day (obviously once you solve the ROM issue).
chears i'll look in to that program once i get the rom issues sorted
i've trued downloading a version of the jas jar rom and that give the same error message about being unable to get device information.
when i flashed phones befor eg a motorola a1000 you had to get the phone in to bootloader mode then use a progran to flash it is it a simaler process with the mda ?
i really dont know if i'm doing anything wrong or not
Good day,
i was trying to build in AKU 3.0 in 3.39 asus ROM. After upgrading none of OEM software starts (drivers too) coz of "not signed with trusted certificate" error. So i got device with working windows but without keyboard (only reset and power works).
I changed HKEY_LOCAL_MACHINE\Security\Policies\Policies] value 0000101a from 0 to 1, but it does not help
Also tried to upgrade with autorun - "not signed with trusted certificate" error
How can i install another ROM with this?
Is there any USB ROM installers?
thanks and sorry for my english
The latest rom is 3.32 only. Where do you find the 3.39 ROM?
3.39 is a russian ROM, also u can find 3.34 french
3.39 mostly has Bluetooth fixes.
Btw i already solve my problem
Hi, I updated my friend's rogers Streak to official 2.2 O2. I followed the same route I did to my own streak o2 1.6 - o2 2.1, then I stuck and couldn't go further since all recoveries gave me FOTA error when I tried to flash 318 official build. I tried all available clockwork and streakmod recoveries without any success. Every time I was getting the same screen as with stock recovery. I had exactly the same problems with my streak but that time I was able to flash 3 files from official untouched rom through the fastboot. Unfortunately those files amss-system-boot.zip are not available any more I had to find another way.
I connected to the wifi and updated to the official o2 2.2 via system update in phone settings. Everything seemed to be fine but then the phone started reboot when you turn on 3g and trying to use data or after 30 min browsing via wifi. And it keeps rebooting until you take out the battery. If I use it as a phone it works perfectly without any reboots.
I tried again to install 318 update with 309 recovery img, tried to go back to o2 2.1 with proper recovery but every time there was the same error - e: error in sd card update.pkg.dec status 2.
Could you guys give me any idea how can I make this thing work?
Can I use QDL tool from my current rom or I need to go back to att 1.6?
Is it possible to extract files from update.pkg to flash it via fastboot or maybe somebody still have the original files from untouched rom amss-system-boot.zip and can re-upload them.
Any help would be highly appreciated
found 'em here:
hotpotato-colon-slash-slash downloads.nitdroid.com/Public%20Uploads/amss-system-boot.zip
good luck.
Hi all,
first of all I apologize for my English (I'm Italian).
The last week i have update my GT-I9505 through the Kies.
After update Wifi and Bt do not have more work, I state that the phone did not root or custom rom.
When I try to turn on Wifi or Bt, the icon lights up for a few seconds and then go off, without giving me a chance to connect.
I tried to redo the update, I tried to install an older version, but with the new protection system is impossible.
At the end I even tried to root, install recovery and custom rom, but I did not get positive results.
Now I have installed the latest firmware 4.3 taken from SamMobile, but BT and Wifi not working yet
Do you have any advice to solve the problem?
Thank you all.
well I was on omegarom 2.0 google edition. so because I have had trouble with omegarom 13.2 but had the standby signal loos problem so I downloaded from sammobile the OTA firmware I9505XXUEMJ7_I9505OXXEMJ8_NEE whitch should be the firmware for Denmark (Nordic) and installed it. got sound and all but no wifi. so I installed the modem XXUEMJ7 witch should be the correct modem for the OTA and got wifi and everything but now no sound.
problem is now that no mater what rom I put on and what modem I use I have no sound at all.
the modem I have tried using all come from this post
http://forum.xda-developers.com/showthread.php?t=2192025
has anyone any Idea how to fix this?
note to self
ok, I finally fixed it. Now I have been using odin since sgs2 and been using custom firmware since then and I still earn every day.
its every every importaint that if you wanna update baseband/formware and so on that instead of doing a reboot with usb cable attahed it will not work all the time. To make a 100% sure turn off phone, deattach cable, boot phone into download, use the up vol, attach cable and then use odin to update.
for some reason even with odin saying all good baseband will not update and the old baseband version will still be active. after doing this and using for the 20 time the stock firmware I got sound, wifi and LTE
hope this helps some people out there.