Hi, I updated my friend's rogers Streak to official 2.2 O2. I followed the same route I did to my own streak o2 1.6 - o2 2.1, then I stuck and couldn't go further since all recoveries gave me FOTA error when I tried to flash 318 official build. I tried all available clockwork and streakmod recoveries without any success. Every time I was getting the same screen as with stock recovery. I had exactly the same problems with my streak but that time I was able to flash 3 files from official untouched rom through the fastboot. Unfortunately those files amss-system-boot.zip are not available any more I had to find another way.
I connected to the wifi and updated to the official o2 2.2 via system update in phone settings. Everything seemed to be fine but then the phone started reboot when you turn on 3g and trying to use data or after 30 min browsing via wifi. And it keeps rebooting until you take out the battery. If I use it as a phone it works perfectly without any reboots.
I tried again to install 318 update with 309 recovery img, tried to go back to o2 2.1 with proper recovery but every time there was the same error - e: error in sd card update.pkg.dec status 2.
Could you guys give me any idea how can I make this thing work?
Can I use QDL tool from my current rom or I need to go back to att 1.6?
Is it possible to extract files from update.pkg to flash it via fastboot or maybe somebody still have the original files from untouched rom amss-system-boot.zip and can re-upload them.
Any help would be highly appreciated
found 'em here:
hotpotato-colon-slash-slash downloads.nitdroid.com/Public%20Uploads/amss-system-boot.zip
good luck.
Related
Hi
Unfortunately I've screwed up my Dell Streak when trying to update it. The baseband version is now set to 'unknown' and I'm a bit too scared to tinker further in case I completely ruin it.
I was previously on the following (attached image is current configuration):
UK O2 contract. 'Locked' to O2.
Firmware Version: 1.6
Baseband Version: GAUSB1A110421-EU
Build Number: 3883
I'm still able to Fastboot files on to it, and can copy files to the memory card. I've tried a few times to put it back to factory defaults, but with no success (doesn't seem to load Update.pkg from stock recovery menu, just goes to a black screen each time. Did previously have clockworkmod running on it).
Does anyone have any ideas how I should proceed as I'm now scared I'll brick it...
Thanks
Jez
I've since tried installing 'Official 2.2 Froyo Untouched' (hXXp://android.modaco.com/content/dell-streak-streak-modaco-com/323561/official-2-2-froyo-untouched) and it now hangs at the dell logo.
I've also just tried the 'Fix for - 'Stuck on Dell logo after 2.1 update' (O2 only)' (hXXp://android.modaco.com/content/dell-streak-streak-modaco-com/317263/fix-for-stuck-on-dell-logo-after-2-1-update-o2-only/) but it just hangs on a black screen when I run the update.pkg. Does anyone know how to get it working again?
Hi guys
Just installed the new keies software and it said the froyo update was out for my handset (galaxy s) it downloads the update really slow (takes about 20 mins) and then then after it reaches 100% the phone disconnects from the PC and the andriod constuction logo appears on the phone, then shortly after i get an error message from kies telling me the upgrade didnt work and that an emergancy repair is needed..
Ive managed to recover the phone back to working order, but is there anyway i can get this update?
p.s phone was unlocked with the tool from these forums when we had it, if that makes a differance
There are many problems with kies while upgrading the firmware. When you get the error - did you read the error? At times it says something about a "rapi.dll" file missing or any other file, just download that file and it should work.
Best alternative is download the firmware from samfirmware (stock) and flash through odin, it hardly takes any time.
If you want your genuine network supplied firmware i would use the Kies Registry Patcher as this allows you to save the downloaded rom in case of problems .
Failing that as advised the stock rom but that is not what came with the phone its generic non network non branded .
http://forum.xda-developers.com/showthread.php?t=835628&highlight=Kies+Registry+Patcher
jje
xero01uk said:
Hi guys
Just installed the new keies software and it said the froyo update was out for my handset (galaxy s) it downloads the update really slow (takes about 20 mins) and then then after it reaches 100% the phone disconnects from the PC and the andriod constuction logo appears on the phone, then shortly after i get an error message from kies telling me the upgrade didnt work and that an emergancy repair is needed..
Ive managed to recover the phone back to working order, but is there anyway i can get this update?
p.s phone was unlocked with the tool from these forums when we had it, if that makes a differance
Click to expand...
Click to collapse
This is not a big deal, just click on emergency when it appears and kies will proceed, it might say that it will download the firmware again or might use the firmware that is already downloaded.
Can somebody point me on kernel for JVQ supporting Voodoo Color? Thanks.
Hello guys, I have a D802 phone and I was on Ressurection Remix 5.0 but since the official lollipop update was made avalaible, I wanted to return to stock and unroot so I could again use my warranty(for some weird reason they couldn't tell last time I took it there that it was rooted). Basically my problem is that every guide for going back to stock has the phone connected to the PC and use the flash tool. Well, I did that but when the mobile support tool opened for the upgrade, it couldn't find my phone. So I found a guide that showed you how to extract and rebuild a kdz file into a .zip. I tried that, used the UK d8023b rom ( A friend of mine who has a d802 as well, though unrooted, got the prompt to update through the pc suite and it updated his phone to d8023b, thats why i used that version), flashed it and I am now stuck in a bootloop. I have full access of recovery and adb but the phone isn't recognised by LG software. Can you please help me use my phone again? Going into download mode didn't work with the flash tool.
hey guys
i just brick my phone (no idea how, flashed android 7 firmware) after flash my phone was working for like 2 hours, then i let himself update a security options. After update my phone went brick
As far i found :
- installed Qualcoom QDLOADER 9008 driver
- found QFIL programmer
i need to have programmer path (something related to JTAG) and build xmp path
Where i can find them? Or is it a other way to resscue my phone?
I feel your pain. My timeline:
- The phone was unlocked but still in Stock Nougat (7.0?). Got that from OTA in Brazil.
- I tried to update to LineageOS 7 via TWRP. After a full wipe (everything, system, data, card, cache etc) I installed the new ROM. Turned on, bootlooped forever.
- Searching around I found out that there was no modem in the Nougat roms and for some reason I needed to flash a Marshmallow modem for my region to make that work (I think there is no Nougat modems around or something).
- I found a LA_DS modem for 6.0, flashed that using TWRP, still bootloop. Tried other roms using TWRP, still bootloop.
- I then downloaded a full stock old 6.0 firmware to go back to stock but the phone wouldn't accept some files ("preflash validation failed").
- Searched around and found out that you can't downgrade a bootloader from Moto.
- Using fastboot, I flashed the files the phone was willing to accept and it finally booted the 6.0 Marshmallow stock rom, but with no networking (radio/modem/baseband/IMEI missing).
- Flashed the 6.0 modem for my region again and everything worked. Connected on WiFi, dual sim cards detected etc.
- I started to install every update the phone showed to try to update it back to latest MM version.
- The three first updates went ok, the fourth turned off the phone to never turn on again.
Looks like there is no way out of this. My phone is pretty old and MotoCare in Brazil will charge a lung and a half for repair.
dsnunes said:
I feel your pain. My timeline:
- The phone was unlocked but still in Stock Nougat (7.0?). Got that from OTA in Brazil.
- I tried to update to LineageOS 7 via TWRP. After a full wipe (everything, system, data, card, cache etc) I installed the new ROM. Turned on, bootlooped forever.
- Searching around I found out that there was no modem in the Nougat roms and for some reason I needed to flash a Marshmallow modem for my region to make that work (I think there is no Nougat modems around or something).
- I found a LA_DS modem for 6.0, flashed that using TWRP, still bootloop. Tried other roms using TWRP, still bootloop.
- I then downloaded a full stock old 6.0 firmware to go back to stock but the phone wouldn't accept some files ("preflash validation failed").
- Searched around and found out that you can't downgrade a bootloader from Moto.
- Using fastboot, I flashed the files the phone was willing to accept and it finally booted the 6.0 Marshmallow stock rom, but with no networking (radio/modem/baseband/IMEI missing).
- Flashed the 6.0 modem for my region again and everything worked. Connected on WiFi, dual sim cards detected etc.
- I started to install every update the phone showed to try to update it back to latest MM version.
- The three first updates went ok, the fourth turned off the phone to never turn on again.
Looks like there is no way out of this. My phone is pretty old and MotoCare in Brazil will charge a lung and a half for repair.
Click to expand...
Click to collapse
Pretty similar situation on my part. I downgraded back to 6.0 and when it tried to take the December update I ended up with the same thing as you. I ended up getting a replacement from Moto for under 100 dollars which was worth it rather than trying to find a solution that doesn't exist.
I have only used stock roms on this phone. I originally upgraded my phone from a UK carphone warehouse rom 6.1 (B2017G UKV1.0.0B01)? I think?? That was a few years ago and upgraded to Nougat using the methods used in this forum.
I found that the wifi would sometimes disappear from the phone and you would have to reboot the phone to get wifi working again. That is ok but after about 3 times of having to do this over a period of a few months it would go again BUT then would then need a factory reset to get the wifi going again! After a year of doing three factory resets
i tried to revert to the older MM 6.1.
I used a ROM that i downloaded from here when i first done upgraded
anyhow i placed ROM in SD and proceeded with the downgrade it went fine up to 81% then got stuck then i restarted the phone again and it got stuck again, so i tried to flash from the SD in recovery mode instead and it says "sorry you can`t sdcard upgrade" so i then pressed reboot system and then it just hangs a the logo.!!
I have rooted phones in the past my last was an LGG2, and a brilliant tool was available so you could flash any stock rom back onto the phone if you had any trouble with custom or stock roms. but there does not seem to be any such tool from ZTE.
If you can help in any way?, i would be delighted!!
THANKS!!
(Soz if i posted in wrong area!)
I got the phone booted through EDL and EDL tool & backup files provided by this site. It took me a while to find all the info i needed.
Also renaming the files from boot to boot.img etc in the edl folder took a bit to work out as the tool kept telling me the files were insufficient!
All good now managed to downgrade to 6.1 UK ...Thanks XDA!!