Good day,
i was trying to build in AKU 3.0 in 3.39 asus ROM. After upgrading none of OEM software starts (drivers too) coz of "not signed with trusted certificate" error. So i got device with working windows but without keyboard (only reset and power works).
I changed HKEY_LOCAL_MACHINE\Security\Policies\Policies] value 0000101a from 0 to 1, but it does not help
Also tried to upgrade with autorun - "not signed with trusted certificate" error
How can i install another ROM with this?
Is there any USB ROM installers?
thanks and sorry for my english
The latest rom is 3.32 only. Where do you find the 3.39 ROM?
3.39 is a russian ROM, also u can find 3.34 french
3.39 mostly has Bluetooth fixes.
Btw i already solve my problem
Related
Hi Guys,
Over the last 4 days I have been reading the posts and trying all sorts of possibilites to fix my Mini O2...
I did the stupidity of upgrading it without a back up. I bought a german O2. I live in Germany, but guess what I don't speak german. So, either I waited 10 years until I can, or updated it to english.
It all went wrong... nevertheless, I manage to download the qtek and used the no id software to upgrade it. it goes well, radio, ext rom, but when updating the rom - when it gets to half way, the program says there was a problem in upgrading the rom. Maybe some german configuration problem?
Can you guys guide me please? thanks a lot!!
I sorted it out.
Thanks for all those who took the time to look at it. Somehow mx Mini is crazy. What I did in the end was uploading each batch at time. Started with the Rom itself, thereafter the ext Rom and last the radio. I did that by extracting the whole package to a folder and removing/returing the parts I wanted at time. So now I have a full english version in my German O2.
Re flashing phone with wwe rom
What you need is to go into boot up mode on comapct i.e black screen with usb and seriel showing only. then you need to get with Maupgrade patch file and then you can bypass security issues on phone and re flash to wwe roms i.e qtek or i mate jam. Hope this helps everything you need is on this site.p.s remember to unzip the wwe file to get the 7 files and replace patch there before updating. 8)
email me on [email protected] for any queries i will try to help
Re: Re flashing phone with wwe rom
leeeel said:
What you need is to go into boot up mode on comapct i.e black screen with usb and seriel showing only. then you need to get with Maupgrade patch file and then you can bypass security issues on phone and re flash to wwe roms i.e qtek or i mate jam. Hope this helps everything you need is on this site.p.s remember to unzip the wwe file to get the 7 files and replace patch there before updating. 8)
email me on [email protected] for any queries i will try to help
Click to expand...
Click to collapse
Hello , I have a similar problem : I have a Qtek S100 from France but live in the USA . I tried to switch ROM with a WWE one (WWE_11200-172_11200.exe) and got a COUNTRY ERROR msg ; then I replaced the MaUpgrade by a MaUpgrade_noID one and now i am getting an "ERROR 150 : UTILITY ERROR" message ; dont really know what else to do and my phone is on boot mode ....
Could you please help...
Thanks in advance
Hi all,
Hoping someone could help me. My Dopod has been freezing on start-up and after doing countless hard resets i am stuck at the Windows Mobile splash screen!
I have connected it to my PC, but as Windows Mobile hasn't loaded, ActiveSync can't pick-up my Dopod. This means i cannot update or completely re-flash. Is there a way to do this without ActiveSync?
I am now stuck with a Dopod i cannot use. I have no idea what to do.
can you flash using SD card? have a search, im pretty sure that will work.
Or go through the Bricked thread
Are you sure you're doing hard resets and not soft resets? Generally when a freeze occurs, you would soft-reset.
If you have indeed been doing hard-resets, then you most likely have a hardware issue and there's not much anyone here can do to help that.
Have you updated your ROM in the past? If these freezes started after an update, then it may be a bad update, so you could either try flashing from microSD as suggested above, or boot into the bootloader as per instructions in the wiki and flash from there.
Thanks for your replies guys!
I have tried all that. My son knocked my usb cable from my Dopod whilst it was updating my ROM ... that was the cause of my Dopod current 'brick' state!
My bootloader is SPL-1.09, but i have noticed from here that the Dopod ROM that i require (for Hutchinson '3' - Australia) uses bootloader SPL-1.06. Is it true that i cannot down-grade from 1.09 to 1.06?
I ask this question as i get "Invalid Vendor ID" attempting to flash my Dopod with that ROM. When i don't get that, i get communication errors (Update Error) when attempting to run Hard-SPL-V7.
What could i be doing wrong?
Hey guys,
Think i have worked out that my CID is corrupt, therefore i can't flash any ROM even if i wanted to. I used mtty and after a bit of searching in this thread (http://forum.xda-developers.com/archive/index.php/t-291336.html) i found that the 'info 2' result i got (HTCSF kEØ(HTCE) meant my CID was corrupt.
Hopefully i haven't voided my warranty as i haven't attempted to flash any 3rd party ROMS, only the one on the Dopod website that was accidently stopped when my son tripped over the usb cable.
We shall soon find out!
Read until post 4#
Ive tried to download a rom, and i used its update tool and used mine nk.nbf, but when i click upgrade, i get the error "Error [238]: File read"
I have a G4 device - Cid unlocked
Now rom: Touch no evil (Lang: English)
Required: Normal WM5 rom (Lang: Danish)
What to do
Go to your phone's service provider website. You will find the latest update there.
It will probably be older (like, last year sometime), but it should be a single (albiet large) executable. No need for additional software, and you can remove the CID unlock, because it won't care.
If your Service Provider doesn't have it, you can download the Cingular 8125 ROM here: http://www.america.htc.com/support/8125/software-downloads.html
The TMobile MDA ROM is here: http://www.t-mobile.com/wmupgrade/
I'm sure you can find it. Use Google. Don't be lazy.
I have already downloaded the rom i want (Yes, from my provider).
But i cant update with it because it says "Invalid update tool" (I did it before)
So when i try to use another update tool it gives me an error reading the file
Remove the CID unlock. It may be hindering the default ROM from loading (it's a a crap-shoot, but it's worth a try...)
What actually is the status of your phone ? is it working normally ? what do you exactly mean by CID unlocked ? cuz a G4 device cannot be CID unlocked.Have you got it 'SoftSPL or HardSPL' ? which Rom exactly you are trying to upgrade with ?, Post your present IPL/SPL...? here,to determine the status of your phone,in order to provide you with any advise or suggestion,if you have downloaded latest official carrier's rom from it's website,there shudn't be any problem upgrading with,ok
Cheers !
First of all i want to tell you guys that when i was flashing MWG rom (WWE_020108_B2_DS) onto a O2 WM 6.0 (WWE_RC2140907B2) using pass.32 hack, setup ended up with error - "No target device found", even though it started normally. After this i did a soft reset on my moblile and it seems the windows rom has screwed up and it hangs after loading.
Though bootloader is working so i'll be installing O2 rom through USB later..
The major problem is that since i do not want to upgrade rom through SD, I wanted some roms that do it through DSUU, i tried some roms like TJ's, etc..
but no avail, they start correctly but then no progress and device just does a reset and loads back to Windows kernel. How should i resolve this?
For your information my Device info as on device info and back of device:
Model: O2 XDA Atom Life
S/N: BAL1G3C743C00YM
DATA BUS:32BITS
PROCESSOR: xSCALE ARMV4I PXA27X
FREQUENCY: 663 MHz
RAM: 64MB
ROM/FLASH: 1GB
ExtRom:EX0917
HARDWARE:V7
RADIO:AL1_KLN2340_070905_RS001
ROM:WWE_RC2140907B2 (BEFORE CRASH)
WINDOWS MOBILE 6 PROFESSIONAL
CE OS 5.2.1616 (BUILD 18120.0.4.0)
BOOTLOADER - AL1 640K EBOOT
Also i would thank in advance whomsoever is able to help me out or refer me to a rom that will work with my device.
Also i have noticed, my device uses some AL1 bootloader whereas most of the roms up here are for the boot loader MN1 and MN2, Does that make much of a difference and will i be able to install such roms from SD?
At morning 4 today, i got an idea, just like we remove 12 byte header and do a upgrade from sd, why not take the file of a rom and add the 12 byte header from the original ROM at C:\Windows\Temp\ and then replace it...
Though this idea worked perfectly and OS was installed but then a message popped on my screen "OS hash fail!" and had to install default ROM from boot loader using DSUU. any help will be appreciated
1st Problem Solved
I got the first problem solved by first getting a rom from o2 then one from mwg,
got their source,(RE) replaced the security hash check from o2 and builded a new rom containing device code of mwg. So now im officially (partly illegally) a MWG O2 owner.
Still looking for roms
Rick_1995 said:
First of all i want to tell you guys that when i was flashing MWG rom (WWE_020108_B2_DS) onto a O2 WM 6.0 (WWE_RC2140907B2) using pass.32 hack, setup ended up with error - "No target device found", even though it started normally. After this i did a soft reset on my moblile and it seems the windows rom has screwed up and it hangs after loading.
Though bootloader is working so i'll be installing O2 rom through USB later..
The major problem is that since i do not want to upgrade rom through SD, I wanted some roms that do it through DSUU, i tried some roms like TJ's, etc..
but no avail, they start correctly but then no progress and device just does a reset and loads back to Windows kernel. How should i resolve this?
For your information my Device info as on device info and back of device:
Model: O2 XDA Atom Life
S/N: BAL1G3C743C00YM
DATA BUS:32BITS
PROCESSOR: xSCALE ARMV4I PXA27X
FREQUENCY: 663 MHz
RAM: 64MB
ROM/FLASH: 1GB
ExtRom:EX0917
HARDWARE:V7
RADIO:AL1_KLN2340_070905_RS001
ROM:WWE_RC2140907B2 (BEFORE CRASH)
WINDOWS MOBILE 6 PROFESSIONAL
CE OS 5.2.1616 (BUILD 18120.0.4.0)
BOOTLOADER - AL1 640K EBOOT
Also i would thank in advance whomsoever is able to help me out or refer me to a rom that will work with my device.
Also i have noticed, my device uses some AL1 bootloader whereas most of the roms up here are for the boot loader MN1 and MN2, Does that make much of a difference and will i be able to install such roms from SD?
At morning 4 today, i got an idea, just like we remove 12 byte header and do a upgrade from sd, why not take the file of a rom and add the 12 byte header from the original ROM at C:\Windows\Temp\ and then replace it...
Though this idea worked perfectly and OS was installed but then a message popped on my screen "OS hash fail!" and had to install default ROM from boot loader using DSUU. any help will be appreciated
Click to expand...
Click to collapse
READ CAREFULLY....
ATOM n ATOM EXEC is almost the same.
but it is a really DIFFERENT when compared to ATOM LIFE.
that's all.
i'm reading ur post and totally don't understand what u're talking about.
I meant after installing MWG rom in Atom Life, through pass.32
The device booted but shortly after booting as i get to the home, screen goes white and i have to soft reset it.
Tried Hard reset
BTW i got how to install AL1.DIO through original DSUU
So problem Solved except i really want a MWG rom
Atom Life
try another ROM..
Rick_1995 said:
I meant after installing MWG rom in Atom Life, through pass.32
The device booted but shortly after booting as i get to the home, screen goes white and i have to soft reset it.
Tried Hard reset
BTW i got how to install AL1.DIO through original DSUU
So problem Solved except i really want a MWG rom
Click to expand...
Click to collapse
....use MWG ROM without replacing the pass.32 file. The pass.32 file is only used if you encounter a Model ID Error....
Installing thru DSUU
Hi,
I tried to do the upgrade based on the thread. Nothing happened other than the mobile getting restarted 2 or 3 times after pressing the camera/record + reset button. Is there any way I can get a DSUU installer exe which will take care of the upgrade .
Hey Rick,
how did you install 6.5 thru DSUU. Please help.
Regards
Arun
Hi. I've got t-mobile branded HTC Touch2. I got through HardSPL FAQ, made backup and started to flash my phone. The main problem was the language (formely german) which I'm still trying to change to English or more preferably - Polish. When I eventually managed to do HardSPL (which involved playing with OEM_FLASHDRV.dll), I downloaded ROM_Mega_HTC_WWE_EastEurope_1-28-479-4 from sunnysoft site and succesfully flashed it. I ignored the warning about limitation to PN: 99HJZ022-00 because I've earlier read people successfully flashed that rom on many different PN's. Mine is actually P/N : 99HJZ057-00.
When I installed language localization patch I ended up looping at "Windows" logo - the progress bar goes to 100% and starts back from 0%. I've tried to hard reset many times, tried with booting it up on and on with no result. One time it popped up with and error box saying the software I installed did not match the rom I have. Weird since it came from sunnysoft site. I've tried downloading it again to exclude a CRC error and flashing itself goes perfectly well.
I'm using English for now, but I'd be nice to have polish xT9.
What goes wrong ? Does sunnysoft patch really work only on this specific P/N ? Is it worth the hassle or am I stuck with branded t-mobile ? This is my first PDA but I also have an option to get some HTC with android. Any solutions?