@All,
As a celebration for my 1000th post, I decided to open a new thread based on Tweakman's idea, which seemed to work very well in the Development and Hacking Section. The idea is simple, a single thread for all Questions, Problems, and Concerns regarding Blue Angel. This includes, but it is not limited to:
[highlight]*Problems with Flashing.[/highlight]
Can't get your device in bootloader? Did it freeze during flashing and now it doesn't get past the 4 colored screen? Are you a complete noob and need some guidance as to how to flash? Etc.
[highlight]*Have questions about which Rom is best?[/highlight]
[highlight]*Want to install software but don't know if it is compatible with your BA[/highlight]
You get my point. All the questions that I have seen/answered over the past couple of months are just repetitions of posts, threads, and things that are readily available on the wiki or in other threads. However, people are either lazy, don't know what a Wiki is / where to find it, or just flat out don't know how to search (or read the forum rules for that matter). Having something general (in this case a sticky) that says "Hey, if you have a question, you can ask here" should draw enough attention and start minimizing the number of new threads and posts opened by users (both new and seasoned). This way, we will be able to keep the development threads a little cleaner and smaller... hence making the site's search function work a little better in the process.
@Seniors,
Kinda like the Q&A team, I will need your help in trying to keep the influx of questions to a certain level by answering them as we see them. None of us are logged in 24/7 (or at least some of us aren't ), but if you guys see a question, please try to answer it. I know that xplode, Chef_Tony, markanthonypr, red_hanks, sun_dream, imatrix, +Que_PPC, motisu, and others normally try to keep this under control, but if we centralize it and contain it, we will have a cleaner forum.
Reserved for future use.
Post Stickied Per Request...
Siemens SX66 BlueAngel Q&A, Help
You know very well you can count on us. Great idea mate. Also congrats on your 1,000's post. I've added a few "tags" to the thread. I hope some others do the same to. Tags help users to find what they are looking for when they use search.
hi
hi specialists
my friend has Blue Angel,he has strange problems.
in (sounds & notification),it didnot saved after changing any parameter,we tried by reflash the rom again,but nothing changed,also we reinstalled radio 1.15 but no change,also the ring tone of the msg is discontinue or irregular when played,and some times didnot wake up (of the device) when recieve a msg.
this is strange issued problems but in mine (BA) every thing is ok,this problems only in my friend (BA),I mate PDA2K.
any ideas?any suggestions?
thnx
notice:when we down grade to wm 6.1 every thing is ok
homam_france said:
hi specialists
my friend has Blue Angel,he has strange problems.
in (sounds & notification),it didnot saved after changing any parameter,we tried by reflash the rom again,but nothing changed,also we reinstalled radio 1.15 but no change,also the ring tone of the msg is discontinue or irregular when played,and some times didnot wake up (of the device) when recieve a msg.
this is strange issued problems but in mine (BA) every thing is ok,this problems only in my friend (BA),I mate PDA2K.
any ideas?any suggestions?
thnx
notice:when we down grade to wm 6.1 every thing is ok
Click to expand...
Click to collapse
Hey homam,
Thanks for kicking things off
First of all, which OS were you having problems with? This is important because it could have been a bug in a rom that could have been fixed in a later version.
@mark,
I know I can count on you, buddy I need help from the mods as well though. I cannot redirect posts to here and/or close threads
My BA, keeps turning on from standby, by a light shock! I maen, if you press the Power button, and then you knock gently on it's back, it turns back on!!
I've set to "Lock all buttons except the power button", However, I still have this issue.
Well, I must confess that once it dropped off of my hand, and it's the result of that...
Any ideas?
by "it turns back on" i assume you mean it wakes up from stand by, it doesn't really start like after a soft reset, right?
since the BA's only battery activated wake-up is in the cradle and we are not talking about soft reset, my first guess is, the battery is not to blame.
have you checked whether you can use your camera at all time? i mean, the camera_detect does not usually run at all times but if the camera connector is a little lose, from now and then it could "discover" the new camera hardware and wake up, that is unlikely for normal devices, but if yours had a crash before...
you could refer to this site for checking possible hardware reasons:
http://www.land-of-kain.de/ppc/mda3/disassembly/
the hardware things aside, there are also many possible software reasons for the device to wake up on:
- update of titanium weather
- automatic email checking
- cell broadcast
- if bluetooth is on
- if beam is on
- automatic update of any software...
plus of course the usual:
- incoming call
- incoming text message
- incoming mms
- upcoming calendar event...
so please check the possible software wake ups first to make sure this is really a hardware issue, because that would be a shame, that could be tricky to solve.
or let me put it this way, if it is really the moving that wakes it up, you have the first BA with accelerometer
EDIT: last but not least, it could only be a bug, maybe a hard reset or change of the rom could also be a way to go, since spontaneous waking up is a known bug for BAs
Chef_Tony
If there was only a way to hack the hardware and make this work at least on Edge. I can live with everything else, but its a shame paying for a full unlimited Internet service and only getting G connection Sighhhhhhh
Ok, I had to let that frustration out !!!!!!
Chef_Tony said:
by "it turns back on" i assume you mean it wakes up from stand by, it doesn't really start like after a soft reset, right?
since the BA's only battery activated wake-up is in the cradle and we are not talking about soft reset, my first guess is, the battery is not to blame.
have you checked whether you can use your camera at all time? i mean, the camera_detect does not usually run at all times but if the camera connector is a little lose, from now and then it could "discover" the new camera hardware and wake up, that is unlikely for normal devices, but if yours had a crash before...
you could refer to this site for checking possible hardware reasons:
http://www.land-of-kain.de/ppc/mda3/disassembly/
the hardware things aside, there are also many possible software reasons for the device to wake up on:
- update of titanium weather
- automatic email checking
- cell broadcast
- if bluetooth is on
- if beam is on
- automatic update of any software...
plus of course the usual:
- incoming call
- incoming text message
- incoming mms
- upcoming calendar event...
so please check the possible software wake ups first to make sure this is really a hardware issue, because that would be a shame, that could be tricky to solve.
or let me put it this way, if it is really the moving that wakes it up, you have the first BA with accelerometer
EDIT: last but not least, it could only be a bug, maybe a hard reset or change of the rom could also be a way to go, since spontaneous waking up is a known bug for BAs
Chef_Tony
Click to expand...
Click to collapse
Wow! Tony! I really appreciate your complete answer. I mean it.
Yes, as you correctly assumed, I meant wake-up. It just wakes up and continues the routine WinMo operation; no soft-reset occurs.
It's less than a year that I've replaced the battery with a new one. I remember all the funny things used to happen when the old battery was dying. But non of them were similar to this one.
It can't be the Camera. Well, I'm able to use it all the time, and the "camera_detect" has been always loaded in the processes whenever I've checked it. About the looseness thing, ummm, I'm not sure. I tried to knock on it to see if it's more sensitive than other parts. I think the upper part of the device is more likely to wake it up by an easy hit (like knocking). but it's the whole upper part, not only the camera section nor the camera button.
Unfortunately, the software possibility, is unlikely to be the problem:
I've used many ROMs on my lovely BA which 3-4 times of them taken place since the wake-up problem.
The software and the usual reasons you counted, do wake it up. but shakes, too.
Finally, to be honest, I'm agree with you! This is the first Blue Angel with accelerometer. yeaaah! I did it!
I bet my friends that I can wake my BA up, without touching any buttons or screen! It's fun this way, but I comes to be annoying when I put it in my pocket or just put it on a table! and it wakes up... consider the forced battery consumption, unwanted screen taps if I don't lock the screen. God bless A_C! and... .
I know it's a hardware issue (((((
@raizaM: My Thought.... Have you ever taken it apart? One of my BA's had 3 loose bolts inside. All 3 were from what I think is the Radio/Antenna part at top. However, in my case, I had a rattle going inside. Thats why I put it apart. You might have something loose inside, causing a connection to arc when you knock on your phone. If you do deside to open it, there is a tutorial on the wiki on how to.
markanthonypr said:
@raizaM: My Thought.... Have you ever taken it apart? One of my BA's had 3 loose bolts inside. All 3 were from what I think is the Radio/Antenna part at top. However, in my case, I had a rattle going inside. Thats why I put it apart. You might have something loose inside, causing a connection to arc when you knock on your phone. If you do deside to open it, there is a tutorial on the wiki on how to.
Click to expand...
Click to collapse
Hey mark!
I had that same issue a while back, but with only one screw (also from the same area as yours).
@raizaM
Just to knock off Chef_Tony's theory out of the table completely, try to erase camera_detect.lnk from \Windows\startup and SR your device. If Chef was right, then your issue might be gone. However, I would follow markanthony's advice and take it apart in case Chef's idea doesn't work.
Oh man, your not my hero anymore LoL.. and here I thought I would be the only one with a mechanic inside my phone.
markanthonypr said:
Oh man, your not my hero anymore LoL.. and here I thought I would be the only one with a mechanic inside my phone.
Click to expand...
Click to collapse
Well, it kept me entertained when my BA would run out of juice
Thanks for your kind advices.
Actually, I tried to remove "camrea_detect" from the startup once, but any way, I gave it a shot again... no success...
Frankly, I'm a lil bit afraid to take my lovely BA apart... :-s... What if... :-(
But, I guess sooner or later I need to do so. so what the heck... lets do it.
Maybe I'll do it tonight. Guys please help me through it. I don't wanna loose my Angel!
Ton'y link provided in the previous posts, would be my start:
http://www.land-of-kain.de/ppc/mda3/disassembly/
any more advices?
raizaM: You're not going to go that far deep. Only remove the cover. If you look at picture #4 on that link, the top green area has about 6 bolts all around it. Those were the ones that were loose on mine. 2 of them were rattling inside the phone. I still can't believe they didn't cause a short circuit. You don't need to go down into the camshell area. Do you use the sliding keyboard? If so, you could have a bad flex cable. But, don't worry about tha for now. Just remove back cover and carefull inspect for loose bolts. Don't over tighten them.
all the master please help, my BA strange,,,,, the screen suddenly go dead after actived wifi or playing game, its suddenly dead, and i must push power button to turn it on again through proses like softreset, that in battery power. but if i conect in charger power mode, i turn wifi,playing game, its normal, the BA still on and working normal,
please2,,,,,if someone knows the problem please help, im desper now....
loryshoe said:
all the master please help, my BA strange,,,,, the screen suddenly go dead after actived wifi or playing game, its suddenly dead, and i must push power button to turn it on again through proses like softreset, that in battery power. but if i conect in charger power mode, i turn wifi,playing game, its normal, the BA still on and working normal,
please2,,,,,if someone knows the problem please help, im desper now....
Click to expand...
Click to collapse
It seems that you have the backlight settings set to dim/turn off too fast. Go to \Settings\System\Backlight and modify the settings in there (particularly the ones labeled "On Battery Power"). Then, soft reset the device (stylus on the bottom).
Hope this helps.
markanthonypr said:
raizaM: You're not going to go that far deep. Only remove the cover. If you look at picture #4 on that link, the top green area has about 6 bolts all around it. Those were the ones that were loose on mine. 2 of them were rattling inside the phone. I still can't believe they didn't cause a short circuit. You don't need to go down into the camshell area. Do you use the sliding keyboard? If so, you could have a bad flex cable. But, don't worry about tha for now. Just remove back cover and carefull inspect for loose bolts. Don't over tighten them.
Click to expand...
Click to collapse
egzthunder1 said:
It seems that you have the backlight settings set to dim/turn off too fast. Go to \Settings\System\Backlight and modify the settings in there (particularly the ones labeled "On Battery Power"). Then, soft reset the device (stylus on the bottom).
Hope this helps.
Click to expand...
Click to collapse
not the setting, it got black scren, its dead screen after running wifi or application, suddenly goes dead, black screen,.
Have you tried with another battery? It sounds to me like your battery is about to die. It won't hold the heavy battery consumption of Wi-Fi and heavy CPU usage while on Games. Try with another battery. Also make sure you followed Egzthunders suggestion to change your Power Settings. If you still need help, post back and include more info about your device, such as, what version of Windows are you running and how old/new is your battery.
Hi everyone,
Since yesterday my touch hd stopped working! It seems like the touchschreen is not working anymore. Only the power en volume buttons are working.
Because of this I tried to do a hard reset which resulted in the same problem. Now I'm stucked on the align screen. If I press really really hard I can align 3 corners of the 4 on the screen, so I can't get further to the next step.
Im currently in a hot hot Australia which might be the reason for all this. If you have a good look at the screen while turning it horizontally, you can see that one part has weird colours/reflection.
So what do you think? Can I buy a new screen and solve the problem or is there more going on?
Can I have warranty? The device is not having the stock rom on it. Can I maybe control the device and install the stock rom on it using a program on a pc or so?
Aaaaaaany help would be so appreciated! Im using the device as tomtom GPS as well, which I really need to travel to Melbourne next week. So I kinda need your help/advise cause I'm a bit in a hurry....
Thank you very much anyways!
Pauwel
Hi
Do a search on "newton rings" which I believe is the weird color / reflection problem.
As an aside when I knew I was getting a replacement I saw a post that suggested putting the phone in freezer for 10 minutes or so !
I did then wrapped it in tissue to absorb the condensation and it worked !!
r
Andrew
Plenty of threads on Newton rings if you search the General Forum like this one.
If its not Newton ring I you want to get past alignment, one method is to skip or bypass the alignment process altogether. Some Chefs do this already, namely Dutty, to among other things speed up the set up process.
How to do it: there are a couple of ways you can find in the forum, however, one way is to create a blank text file called, welcome.not, instead of welcome.not.txt, and place it in the root of your storage card. Next, flash a new rom or hard reset and you're done. It's up to you whether you leave your SD in during flash. I do not. If you do not, after the rom flash, stick your SD in and hard reset. If all goes to plan, the "welcome" phase will be bypassed, any you will not be prompted to align the screen or set the date, location, time etc. If for some reason it does not, go into the root of your SD and manually with your stylus or via activesync on your desktop create a new blank file in there and name it welcome.not. That actually worked for me. If it works then leave it in the root of your SD and it will allow the bypass with each new flash or hard reset.
The screen coordinates should load automatically after the bypass. If for any reason you need them, here are the Blackstone alignment coordinates from HKLM/Hardware/Devicemap/Touch/ Calibrationdata:
511,542 183,881 183,198 834,197 883,880.
Had that problem and you need a new ditigiter. Only problem is you will most likely break the screen replacing the ditigizer. So, the only fix is a new LCD screen and digitizer. You can get them from ebay. I did it and it was pretty easy, just take your time and get the videos and manuals people have posted on here. Good luck.
Hi Guys,
I've searched through the forums, and did not find any post relating to the problems that i am having on my HD2 for about 2 weeks now.
Problem number 1:
When im trying to make a phone call, it immediately switches to speaker phone. This is also occuring when im receiving one. I pick up and almost turn deaf from the person greeting me.
What i've tried:
- Flashing a new rom
- Flashing a new radio
- Flashing a new HSPL(might aswell try that one while im at it right?)
- Tried looking into the phone setting with no success
- Smashing it on my desk being very frustrated
Problem numer 2:
After flashing one of NRGZ wonderfull roms, with maxsense, my phone stopped syncing with my pc. The icon on the taskbar only shows it is being charged.
What i've tried:
- Turning on the "enable faster data synchronization"
- Tried putting the pc to usb connection on hard drive or modem as default
- Flashing a new rom & radio
- Putting the cable in all of my USB ports on the hope it might start working if i do this whilst looking angry at my HD2.
- Shaking my fist at it in anger
This problem also occurred on my Linux install which would normally recognize my HD2 when it is in HDD mode, and i would like to hear some suggestion on how to possibly fix this!
so i guess my phone is f0rked?
i can always get a desire or droid incredible :/
shameless bump, im really about to destroy my HTC and buy me a Desire or droid incredible
Bartkevin said:
Hi Guys,
I've searched through the forums, and did not find any post relating to the problems that i am having on my HD2 for about 2 weeks now.
Problem number 1:
When im trying to make a phone call, it immediately switches to speaker phone. This is also occuring when im receiving one. I pick up and almost turn deaf from the person greeting me.
What i've tried:
- Flashing a new rom
- Flashing a new radio
- Flashing a new HSPL(might aswell try that one while im at it right?)
- Tried looking into the phone setting with no success
- Smashing it on my desk being very frustrated
Problem numer 2:
After flashing one of NRGZ wonderfull roms, with maxsense, my phone stopped syncing with my pc. The icon on the taskbar only shows it is being charged.
What i've tried:
- Turning on the "enable faster data synchronization"
- Tried putting the pc to usb connection on hard drive or modem as default
- Flashing a new rom & radio
- Putting the cable in all of my USB ports on the hope it might start working if i do this whilst looking angry at my HD2.
- Shaking my fist at it in anger
This problem also occurred on my Linux install which would normally recognize my HD2 when it is in HDD mode, and i would like to hear some suggestion on how to possibly fix this!
Click to expand...
Click to collapse
Problem 2:
1- Try to disable your antivirus and firewall software.
2- Else: Turn off the "enable faster data synchronization".
Cheers!
thanks for the tips, but i have an independent machine that acts as an antivirus for all my machines, and same goes for my firewall.
I also tried turning off the faster data sync but its still not seeing my pc's /laptops as machines. the phone reacts like i plug it in the contact, and not a pc :/
tried this on linux and windows
It sounds as though some settings are lingering through the ROM flashing. Maybe you should check out Task 29 in the Rom section to completely clear your system before a ROM flash.
same problem
hi..
i have the same problem..
the positive side is that i decrease my phonebill... i have no motivation to call someone.. its soooo frustrating... since november i have this phone... and since 2 month this problem makes me going crazy...
what could it be!?? is this a hardware defect?? or what...
i searched a few forums... nothing really helps...
there was a bugfix for the changing horizontal mode... hmm.. ok... thats great... but it does not fix the main problem...
1. The phone speakers...
2. usb connection...
today my hd2 turned himself on in my pocket... and shoot a photo... of course completely black... and published it on facebook... ...
later i saw it on facebook.. and there where comments:
what is that, why are you uploading this... etc.. -.-"
i really like to make a rom update.. but it wont work... this is driving me crazy... how could this be that htc has no solution for this ULTRA BUG????
since touch hd ... i started to like htc.. but now.. i dont know...
do anybody have a solution here in this forum for this problems ??
greetings for all of you...
Hi, it looks like I'm not alone then! My HD2 is from the first batch (November 2009).
I have the same issue with speaker on when calling (since a few days)... Also the screen automatically turns on in my pocket and so I've for example twitted "hjkhlhf" to the whole world...
So, what I have done!
1) execute task 29
2) go back to original SPL 1.42.000 (the one originally on my phone) with the HSPL2 tool on this forum
3) flash the latest official ROM from HTC website: WWE 1.66.405.2
Result: after a hard-reset, without installing ANYTHING!
1) Navipanel starts itself because he thinks I'm in car kit mode (but why?), even though the phone is not connected to anything (no usb cable, no bluetooth activated, heck even no wifi or data connection!)
2) after disabling Navipanel via the options of Navipanel, I can finally use my phone... well sort of: everytime I get out of Sense UI (making a call, reading an e-mail, etc.) the screen automatically switches to landscape mode!
3) more frustating, the speaker still switches on when making a call... So now when I make a call it's in landscape mode (even when the phone is vertical) and the speaker goes on...
4) usb does not connect anymore in Windows. It's still recognized when in bootloader mode though, so it's still possible to flash something else...
=> hard-resetting again and again leads to the same result...
What I've done? I've called HTC, they will pick-up my phone on Monday morning for repair... I will keep you updated!
Well you will never believe this: as soon as I have finished typing this message, I have made a phone call for my work. And guess what? The problem that has been bothering me day and night for a week is all of a sudden GONE!!!
I guess I'll cancel my repair pick-up then... But on the other hand it must have been some hardware malfunction, and who knows if it will not appear again?
puh...
there is a bugfix on htc... for the landscape problem... but this hole problem appears on my phone the 3. time.. so don t think this was the last time...
my hd2 was also from the first batch nov 2009.. may be this is it...
the first wave of hd2 have a malfunktion...
nice...
Hi All
Was using SD versions of Android in my HD2 which worked quite well .....decided to make the jump to NAND recently but I'm having a problem with phone calls.
When I make a call out, everything works fine, but when I hang up on the call, the hard buttons on the bottom of the phone all light up but the screen doesn't turn back on.... Only way to get the screen back on is to plug in the USB cable or power adapter or pull the battery and do a reboot!
Have tried a couple of different builds from different chefs and a couple of Radios just in case.
At the moment I've got the following on it:
Radio is 2.12.50.02_2
Android version is 2.2.1
Build is DL DesireZ v3.4 Final (but this problem also happens with CleanDROID V1.31)
Also tried an MTTY Task 29, reload of MAGLDR then re-flash of the NAND in case traces of my previous ROM were still around but that hasn't helped either.
Any ideas?
I seen many threads about same situation. Actually i itself use daily gpc hd2 gingerbread v1.5 with same problem. Sometime help back button (when call ended not at me). Sometime just more light to proximity (or it light) sensor (when inside and put phone with face to some light). Outside i just must turn phone with face to sun or good light then screen wakes up.
I tested many many nand roms. All have same problem.
Tested win 6.5, win 7 and sd version, they works well. That gives confirmation that my proximity (or it light) sensor works well. And finally that something wrong with nand.
Here was discussion that MAGLDR does that. NO.
I started run over net and find solution. Here seems no help for this right now. Maybe just problem ignored because cookers itself dont have this and cant do anything. If you dont have problem then how you can fix it.
On web i found some discussion about kernel problem or smth about this proximity sensor. I cant find it right now again. There was talking about this problem, but no solution.
I thinked about open new thread and invite kernel chiefs to discussion to solve this problem. But today i find your ask. I opened for any test and help that i can give. I dont be afraid to lose my phone if something must go wrong. Phone is just piece of electronic and you can replace parts. But knowledge and experience you cant buy.
Any ideas how to resolve this little bad thing?
Thanks for the reply.
Yes it's a real problem but mine won't wake up no matter how much light.
The only way I can get it to wake up is to plug it in to power, then the screen wakes up.
Is that the same as yours?
I i remember it right i was suprised once too if this happened. I just put my "again dead" phone to charging and its waked up.
If screen is dead and same time connected to pc (i use for managing inside phone androidcommander) then moving over dirs wake screen back too.
But lets look how long my nerves will be good. Today i thinked to move back win 6.5 and sell this bastard.
No don't sell we need to resolve! I'm hoping someone will look at this thread and help us figure out why this is happening. I can't believe we are the only 2 people who have this issue.
Anyone else have any ideas as to why this is happening?
This issue was also on sd versions. So I see nand has not fixxed it. I am running MDJ HD 4.6 and have this issue. Sometimes the light sensor works properly and other times it goes to black screen and gets stuck.
I read somewhere that it might be the hardware itself. Saw a video on youtube also. Seems the european T8585 and telstra T9193 might have poor light sensors. The T-mobile light sensor supposedly does not have this problem.
So I am guessing anyone with this problem does not have the T-mobile USA version??
It could just be drivers too. It is a pain and sometimes I wish I could just disable the light sensor.
Also NAND roms are no better than sd versions as far as bugs. If the sd version has the bugs then so will the NAND version. The build is just installed at a different location.
Yes good point.... the bug will be replicated as it's just where the OS is stored that's different.
I'm thinking it's the hardware as I have this problem on WinMo6.5 too and I have tried various WinMo roms but had the same problem.
Mine is a UK HD2 supplied by O2. Wish there was a fix for it :-( It's a real problem.
PS I ran PhireMOD's Skinny EVO SD Android for a while and didn't have as much as a problem as I have had with the 2 NAND roms I've tried..... if that's any clue? At least with that rom I was able to make calls and hang up and still get the screen back after I hung up (except for the screen going white and washed out which could only be resolved by a reboot). There was still the problem with the screen being on all the time during a call or the screen being black and not coming back on during a call though.
I have these sort of problems too. It's really annoying when you're in a phonecall and you take the phone away from your ear and it takes a few secs to turn on. Also when I'm unlocking it.
Sent from my HTC HD2 using XDA App
At least yours comes back on lol mine stays off for ages and ages and sometimes doesn't come back on at all!
Noticed that if I shine a torch into the proximity sensor that's the only way I can get the thing to turn back on :-( Also noticed the 2 little holes where the prox sensor sits appear dirty/cloudy... not sure how that happened.
I wonder if the prox sensor is busted or if it's just dirty or something? Going to get a T5 Torx and take my phone apart to find out if it's something I can resolve.
Well i had this with rafpignas kernel...i changed to markinuX today and tested it with over 10 calls and it works flawlessly right now
Hmm, are you sure g9650? Seems my guess about kernel was then true. I use gpc pure gingerbread 1.6 with gpc itself made kernel. I go right now replace kernel and test. Results tomorrow.
Took the phone apart yesterday night and uncovered the proximity sensor. Even out of the case it needs a torch/flashlight to shine on it to bring the screen back on :-( I honestly think the proximity sensor hardware isn't working anymore.
I'll try the kernal you suggested though just in case that's what's causing the problem.
Datas0ft let me know if it works for you?
Latz, actually i taked to test markinus extra clean 1.7.1 (right now on it itype this). Had one call before and no changes.
Also i stuck on taking out kernel at this version. Low knowledge. Dont find any help yet on xda. I work on it. If you have hints dont hestitate say.
Sent from my HTC HD2 using XDA App
:-( I was hoping we found a miracle cure! Ok let me flash mine tonight and try it to see if mine behaves any different. Will post back with results... let me know fi anything changes with your phone datas0ft.
q9650 said:
Well i had this with rafpignas kernel...i changed to markinuX today and tested it with over 10 calls and it works flawlessly right now
Click to expand...
Click to collapse
Can anyone upload MarkinuX Kernel please? Thanks
Ok. Searched forum. Finded way how to get kernel at some nand. Got MarkinuX kernel and now test. Test will be during whole day tomorrow on different conditions.
For kernel extract and install is this thread very good. Helped and teached me.
marcosxd i taked needed files for you and attached.
datas0ft said:
Ok. Searched forum. Finded way how to get kernel at some nand. Got MarkinuX kernel and now test. Test will be during whole day tomorrow on different conditions.
For kernel extract and install is this thread very good. Helped and teached me.
marcosxd i taked needed files for you and attached.
Click to expand...
Click to collapse
Thanks, I just finished downloading the whole Markinus rom to extract kernel haha but you saved me... will test and report, thanks
datas0ft said:
Ok. Searched forum. Finded way how to get kernel at some nand. Got MarkinuX kernel and now test. Test will be during whole day tomorrow on different conditions.
For kernel extract and install is this thread very good. Helped and teached me.
marcosxd i taked needed files for you and attached.
Click to expand...
Click to collapse
Quick question, the zip file you gave me only has two .ko files and zImage while the original rafdroid kernel has like 5 .ko files... what should I do? copy raf's kernel .ko files missing into markinux ones?
Or just pack the zip file using two .ko files? Thanks
I cant ansver. Dont have much knowledge on this. I followed instructions. This taked to me these three files. I installed these.
I finded some problems right now (wifi and gps dont work and my 3g too). This may not happen at kernel side. I have made some changes on rom side. I go replace whole rom and then again kernel. Then i go make final decisions.
I'm having the same problems, you two are not the only ones. This has been really frustrating me lately, and I thought it might have been a problem for only me because I just had the screen replaced. It worked fine in winmo 6.5, now in NAND I'm having some issues. I text a lot more than I actually call, however so it's not that big of a problem for me right now
I just took a backup with sprite backup of my hd2, due to it had a problem with the microUSB contacts. It worked fine.
I just got a new replacement device, same rom, just seems to be a different display(The old one just got a point matrix with a huge distance between and some lines through it, the new one got this, but additionally a smaller point matrix not reaching the outer border of the screen), a less powerful vibration and lower quality bottombar buttons(Seems to be an improvement by htc xD).
I made a hard reset of the device, inserted my sd/sim and ran my backup as level 3. First thing I noticed that the orange led does not blink once a while to indicate that the network is available.
Everything seems to be fine, except that the device seems to freeze if it is longer in standby. I press a button to wake up, just the bottombar light goes on and shuts off after a while. If I try this some more times the bottombar stops from going on and the phone seems to be off. Its like off, except you are unable to turn it on .
If I try to phone it, I get the usally waiting tone on my phone but the hd2 does nothing.
If htc sense is disabled it works fine
lets try to fix it!
Sounds as if your replacement unit might be a bricked unit, too.
But, let´s not hope the worst... I can think of other possible things: Did you try the same ROM without using the backup for a couple of hours? Are both the SD card and the SIM card fine?
Its only happening with the backup. Its htc sense.
Is there any cab that reinstalls htc sense?
The only way to re-install Sense is by flashing a ROM, there is no cab.
That would make my backup useless. Is there any way to exclude the manilla files from the backup. A list of files would be enough :-/
So fixed it by restoring everything except all files in the windows dir. Then I copied over all files in the windows dir i needed .