Related
is it possible to switch to another custom recovery after I already got clockworks?
I tried unrevoked but its stuck in the reboot (I believe its trying to root my aria again)
not sure what youre trying to do.... i believe Clockwork is the only Recovery for rooted phones. if you want to flash a custom ROM, well that is something else altogether. please be specific as to what you want to flash to the phone. include a link to the flash too
I was trying to flash psfreedom recovery rom from here
http://psfreedom.com/wiki/HTC_Aria
I believe the method on that website was for unrooted arias without clockworks
zyo said:
is it possible to switch to another custom recovery after I already got clockworks?
I tried unrevoked but its stuck in the reboot (I believe its trying to root my aria again)
Click to expand...
Click to collapse
To flash a different custom recovery on your Aria, you need to rename the zip file LIBEIMG.ZIP on the SD card and boot in HBOOT (Power on the phone by holding down VOL DOWN and the Power Button). When it boots to the HBOOT screen you should see text stating that it found LIBEIMG.ZIP and is installing it.
awesome. now before I go ahead, is there any clockworkx recovery image I can revert back to?
zyo said:
awesome. now before I go ahead, is there any clockworkx recovery image I can revert back to?
Click to expand...
Click to collapse
I'm curious, what recovery are you talking about?
thanks for including the link. the instructions are clear.... Root IS required, Clockwork recovery is recommended, the Freedom Aria flash appears to be a custom ROM.
once the phone is Rooted, boot into Recovery, make a Nandroid backup, and flash downloaded zip file from SD card.
if you need help Rooting, there is all sorts of good methods available on this site. I use the Unrevoked method myself, but it works best on Linux or Mac OS
zedbra said:
thanks for including the link. the instructions are clear.... Root IS required, Clockwork recovery is recommended, the Freedom Aria flash appears to be a custom ROM.
once the phone is Rooted, boot into Recovery, make a Nandroid backup, and flash downloaded zip file from SD card.
if you need help Rooting, there is all sorts of good methods available on this site. I use the Unrevoked method myself, but it works best on Linux or Mac OS
Click to expand...
Click to collapse
hmm I think you are looking at the old method which is a custom rom
The new one is a custom recovery which brings me to the question as I dont think you can flash a custom recovery in the clockwork custom recovery.
its possible im looking at the wrong thing, but far as i can tell it states "Recovery Custom ROM" which is totally different from Custom Recovery ROM
From link posted above:
"Update can be installed in recovery mode in Psfreedom settings menu via Update (local) or Update (net) if you have configured your wifi connection. Put the file on your SDCARD and install it.
Download Recovery custom rom : http://alephzain.klutsh.com/aria-recovery.tgz "
tpbklake said:
To flash a different custom recovery on your Aria, you need to rename the zip file LIBEIMG.ZIP on the SD card and boot in HBOOT (Power on the phone by holding down VOL DOWN and the Power Button). When it boots to the HBOOT screen you should see text stating that it found LIBEIMG.ZIP and is installing it.
Click to expand...
Click to collapse
I have similar questions. I was trying to update my version of clockwork also using unrevoked again, but couldn't get it to work. I guess my questions are:
1. Is there any benefit in updating to a newer version of clockwork? My current version is 2.0.x.x and I believe the latest one is 2.5.0.4.
2. Will this same method work to do so? Can I rename the latest clockwork .zip file like this and get it updated?
I thought using the flash clockwork option in ROM Manager would do it, but it doesn't. If I reboot from ROM Manager it goes to the newer version, but if I reboot otherwise it goes to my original. The couple times I've used it, there appears to be maybe some different features/options in the newer one and I feel like I might be missing out on something!
What's the difference with this recovery?
Sent from my Liberty using XDA App
zedbra said:
its possible im looking at the wrong thing, but far as i can tell it states "Recovery Custom ROM" which is totally different from Custom Recovery ROM
From link posted above:
"Update can be installed in recovery mode in Psfreedom settings menu via Update (local) or Update (net) if you have configured your wifi connection. Put the file on your SDCARD and install it.
Download Recovery custom rom : http://alephzain.klutsh.com/aria-recovery.tgz "
Click to expand...
Click to collapse
These are probably two different things. once you got the recovery rom flashed you can upgrade it in recovery mode (hence its different from original clockwork recovery)
Ok bro, I didn't see much info about it so I'm gonna take your word for it.
@brswattt, far as I can tell this is " basically" used for jailbreaking the ps3.
@armyengineer;
you can use unrEVOked to flash the new recovery. if youre a Windows user, download the unrEVOked tool and run the .exe as Administrator. also make sure there are no conflicting s/w on the PC such as HTC Sync and you have all the drivers installed(HBoot, ADB drivers, etc.)
for more info about the PSFreedom Recovery, check out THIS Thread HERE
unrevoked keeps giving me
couldnt find misc
error, is there any other way to flash a recovery?
zedbra said:
@armyengineer;
you can use unrEVOked to flash the new recovery. if youre a Windows user, download the unrEVOked tool and run the .exe as Administrator. also make sure there are no conflicting s/w on the PC such as HTC Sync and you have all the drivers installed(HBoot, ADB drivers, etc.)
Click to expand...
Click to collapse
This still isn't working for me. Everything appears to go well at the start, then I get:
Waiting for root...(safe to restart if this doesn't work)
At which point the only way I can restart is to pull my battery. After doing so, it reboots and I get:
This was a triumph
It is not, however, any such thing. After another minute I get this:
Internal error: couldn't find misc.
So I've still got my original version of clockwork, 2.0.1.3, despite the fact that ROM Manager is telling me I have 2.5.0.1. I'm obviously missing something here.
BTW, if it matters I'm running CM 6.1.0
armyengineer51 said:
I have similar questions. I was trying to update my version of clockwork also using unrevoked again, but couldn't get it to work. I guess my questions are:
1. Is there any benefit in updating to a newer version of clockwork? My current version is 2.0.x.x and I believe the latest one is 2.5.0.4.
2. Will this same method work to do so? Can I rename the latest clockwork .zip file like this and get it updated?
I thought using the flash clockwork option in ROM Manager would do it, but it doesn't. If I reboot from ROM Manager it goes to the newer version, but if I reboot otherwise it goes to my original. The couple times I've used it, there appears to be maybe some different features/options in the newer one and I feel like I might be missing out on something!
Click to expand...
Click to collapse
Although there is a ClockworkMod 2.5.0.4 version, I don't think it is for the Aria. According to ClockworkMod ROM Manager, 2.5.0.1 is the most current one for the Aria so I am believing what ROM Manager is telling me since it is written by the same the vendor.
I have tried CM 6.1.0
original HTC Aria 2.1 International Rom
and FR001 RC1
all no go. I think it has something to do with the phone already been rooted and has clockworks installed which makes unrevoked unhappy
zyo said:
I have tried CM 6.1.0
original HTC Aria 2.1 International Rom
and FR001 RC1
all no go. I think it has something to do with the phone already been rooted and has clockworks installed which makes unrevoked unhappy
Click to expand...
Click to collapse
OK, let's start from the beginning. You asked about installing an alternate recovery (PSFreedom recovery), but apparently it has its own installation procedure that needs to be run on an unrooted Aria.
What you need is to find just the PSFreedom recovery and copy it to your SD called in a file called LIBEIMG.ZIP and that is how you need to install it on a root phone that has ClockworkMod. Perhaps you need to go back to the PSFreedom thread and ask if a LIBEIMG.ZIP can be produced that can be flashed from HBOOT to replace ClockworkMod.
Looks like everything you need is located in the PSFreedom wiki:
http://psfreedom.com/wiki/HTC_Aria
I got a recovery.bin which is suppose to be used with unrevoked.
are you talking about the same one if I just compress it into a zip file?
For those of you wondering why the S-OFF feature was worth your extra time to update, this is a prime example of why S-OFF kicks royal behind.
So here is the situation I was having. Friday morning, T-Mo showed me some love and sent me the Gingerbread update. I didn't have my morning coffee so I wasn't thinking strait and authorized the update. I forgot that it would probably interfere with good ol' ClockworkMod Recovery. Sure enough, it did. So, after the OTA failed due to the recovery, I haven't been able to get T-Mo to show me some OTA love again.
However, I had previously invoked the S-OFF feature when it was discovered how to.
After following the guide at http://forum.xda-developers.com/showthread.php?t=1202060 I found myself with a G2 using stock recovery and bone stock Gingerbread (S-OFF still invoked).
After some thought, I decided to do the following:
Flash ClockworkMod via the bootloader screen, and flash SU via the ClockworkMod screen.
Note: You can only do this if you have S-OFF! And since my guide writing skills are not so pristine, I'm assuming you have some sort of working adb/bootloader/recovery knowledge.
Save the attached files (PC10IMG.zip & su.zip) to your sdcard. Reboot into the bootloader either by using the adb command adb reboot bootloader or by powering off, and then holding Vol-Down+Power.
The bootloader will scan for PC10IMG.zip and then ask you if you want to flash the recovery. Yes! You do!
After this, reboot the phone. Reboot into recovery by using the adb command adb reboot recovery, or booting back into the bootloader and navigating to the Recovery console (if you didn't delete the PC10IMG.zip, bootloader will scan it, but don't let it update again, this is redundant).
Once you are in ClockworkMod, navigate to "install zip from sdcard", then to "choose zip from zip card". Select the su.zip file from the list, and authorize the recovery console to flash the zip. Reboot the phone.
Now, you will see the coveted SuperUser app in your drawer. I figured this was wayyyy to easy to have worked, so I tested some root dependent apps, they work flawlessly. I also used the adb command adb shell followed by su once in the shell. SuperUser requested my permission and after granting it, I am able to remove the bloatware that was replaced during the downgrade, also, rebooting the phone as normal and from a removed battery does not remove this root. So I'll say it's a permaroot.
I compiled the attached files specifically for this. The ClockworkMod Recovery version is 3.0.2.4, SuperUser version is 2.3.6.1.
Thanks!
It sounds like you started where I am: Clockwork Mod, S-OFF and stock Froyo 2.2.
Q. How did you follow the steps in the thread to get onto Gingerbread? Did you remove ClockworkMod? If yes, how did you revert to stock recovery? This is the step that I'm caught on, and can't find a thread regarding. Thanks!
Edit to add:
Did you unroot the phone using these steps?
If so, were you at all scared about the warning regarding PC10IMG.zip?
I ended up using the entire stock 2.2 PC10IMG which wiped clockwork off the phone to stock recovery. I didn't do anything to unroot, since the stock rom replaced recovery, system etc but left s-offf in tact.
ETA: I also didn't read either of those articles and wasn't aware of the bricking issue, I've done the phone flashing, modding and unbricking for about 2 years now and just used experience as a guide..
Sent from my T-Mobile G2 using Tapatalk
rdmerck said:
I ended up using the entire stock 2.2 PC10IMG which wiped clockwork off the phone to stock recovery. I didn't do anything to unroot, since the stock rom replaced recovery, system etc but left s-offf in tact.
ETA: I also didn't read either of those articles and wasn't aware of the bricking issue, I've done the phone flashing, modding and unbricking for about 2 years now and just used experience as a guide..
Sent from my T-Mobile G2 using Tapatalk
Click to expand...
Click to collapse
Okay, so just to verify, you flashed CWM recovery while running the GB update? When you adb shell you open a # prompt? I've been gfree s-off'd since I got my phone so even with the leak or otherwise I've been able to just reflash the stock 1.19/1.22OTA and reroot it but I didn't think to try flashing cwm while it's stock gb'd....so tempted.
I compiled the attached files specifically for this. The ClockworkMod Recovery version is 3.0.2.4, SuperUser version is 2.3.6.1.
Click to expand...
Click to collapse
So I sit down to write up a quick guide this morning and what do I find? Nicely done. Couple of points I wanted to add to why this works -
This method fixes the things that the OTA breaks for root: New stock hboot and stock recovery are flashed and on the rom side it wipes /system/xbin which breaks the su symlink.
Flashing the PC10IMG above fixes the recovery.
Flashing the superuser package reinstalls Superuser.apk, the su binary and fixes the symlink to xbin.
But, still not hboot-eng so your fastboot options are limited.
When I did this I had replaced the DZ engineering hboot.img in rmk's package with the G2 engineering hboot.img and edited android.txt for the new G2 build. This allows you to take care of both in once flash.
Hope this is useful to someone and thank you for saving me from writing a guide!
8/27/2011 Edit:
Realized ro.secure=0 so I repacked the stock boot.img from the 2.3.4 PC10IMG.zip with the below changes to default.prop. This allows use of the "adb remount" so files can be pushed to system folders without needing to go into terminal and mounting rw.
Code:
#
# ADDITIONAL_DEFAULT_PROPERTIES
#
ro.secure=0
ro.allow.mock.location=1
ro.debuggable=1
persist.service.adb.enable=1
Modified installation instructions for full root:
Flash the PC10IMG.zip with the G2 engineering bootloader in this post
Flash the superuser update.zip in the OP
Extract the attached boot.img to the platform-tools directory
Remove the PC10IMG from your sdcard and reboot into bootloader
Select fastboot
Enter the following command in terminal or cmd:
Code:
fastboot flash boot boot.img
fastboot reboot
Kind Regards,
Kevin
zkid2010 said:
Okay, so just to verify, you flashed CWM recovery while running the GB update?
Click to expand...
Click to collapse
Yes. Just flash the PC10IMG and you have clockwork recovery again. However, you absolutely need SuperCID set while in froyo or this does not work.
Kind Regards,
Kevin
Confirm Here that it works...
Root and S-OFF
Gingerbread OTA 2.3.4
Thanks Guys for your help!
Flawless!
This worked flawlessly!!
I admire you so much for figuring this out!!
Thank you so much!
HELP!
sort of noobie here..
so i just updated my g2 to 2.3.4 following http://forum.xda-developers.com/showthread.php?t=1202060
and now i want to perm root my phone and overclock it but im having troubles.
1. how do i get clockworkmod installed? i know you can install this from rom manager but it requires root. right?
cause you said.. "Just flash the PC10IMG and you have clockwork recovery again"..
i tried flashing the PC10IMG.zip but got an error and says aborted.
any help please?
thanks in advance
If you are already on 2.3.4 and had not previously rooted then this thread will be of no use to you since your G2 does not have SuperCID (again, read the wiki.)
You will need to downgrade back to froyo (other threads on this and links in the wiki.) Once rooted, then install one of the rooted stock roms in this forum or follow this guide to reinstall the recovery and superuser (hboot optional.)
Hope that gets you going in the right direction.
Kind Regards,
Kevin
Sent from my T-Mobile G2 using Tapatalk
G2 Problems??
Hi, how can i get S-OFF on my g2 since it seems i can not generate a beta key from the revolutionary website cause g2 it's not in the drop down list, don't know what to pick and i want to be able to have my g2 rooted with android 2.3.. can somebody help me please?
Thanks.
Revolutionary is not available for the Desire Z/G2. Have you flashed the leaked 2.3.3 and trying to root? PM please.
Hey I notice most of the people in this thread are Americans - would this method work for the DZ or is it just for the G2?
Sorry if this is a noobish question.
Not a noob question, this one is new for me too. Fundementals are the same, process would be the same. I don't know if there is any issue using a PC10IMG with the info for a G2 (contained in the file called android-info) so may need rebuild one modified with DZ information.
Proceed with caution and do not do anything you are not 100% sure about.
Sent from my T-Mobile G2 using Tapatalk
I'll hold off on confirming the update in that case! I'm still on stock firmware, didn't apply the update from March either. When I've read enough to be confident on how to perma-root the current firmware I might risk following the method in this thread. Then I'll post back to let you know if it works on the DZ.
My DZ came with 1.34 firmware, I rooted it on this firmware. I accidentally upgraded it and am now on the OTA gingerbread ROM. Is this method suitable in this situation or do I require to flash a rooted stock ROM for this method to work.
Accidentally manually applied the OTA? Should work, you have a G2 now!
Sent from my HTC ThunderBolt using Tapatalk
Is there any newbie guide for how to do this? From getting Clockwork on there to getting this rooted 2.3.4 on. I have a rooted 2.2 with S-OFF right now, stock. Just don't really know what to do from this point on.
How to is in the OTA thread (which needs a helping of Iron Fist.) Come back here when ready to re-root.
Sent from my T-Mobile G2 using Tapatalk
rdmerck said:
Save the attached files (PC10IMG.zip & su.zip) to your sdcard. Reboot into the bootloader either by using the adb command adb reboot bootloader or by powering off, and then holding Vol-Down+Power.
The bootloader will scan for PC10IMG.zip and then ask you if you want to flash the recovery. Yes! You do!
After this, reboot the phone. Reboot into recovery by using the adb command adb reboot recovery, or booting back into the bootloader and navigating to the Recovery console (if you didn't delete the PC10IMG.zip, bootloader will scan it, but don't let it update again, this is redundant).
Once you are in ClockworkMod, navigate to "install zip from sdcard", then to "choose zip from zip card". Select the su.zip file from the list, and authorize the recovery console to flash the zip. Reboot the phone.
Now, you will see the coveted SuperUser app in your drawer. I figured this was wayyyy to easy to have worked, so I tested some root dependent apps, they work flawlessly. I also used the adb command adb shell followed by su once in the shell. SuperUser requested my permission and after granting it, I am able to remove the bloatware that was replaced during the downgrade, also, rebooting the phone as normal and from a removed battery does not remove this root. So I'll say it's a permaroot.
I compiled the attached files specifically for this. The ClockworkMod Recovery version is 3.0.2.4, SuperUser version is 2.3.6.1.
Click to expand...
Click to collapse
**** Im at the step above finally lol this is my first root and I had to downgrade, man Ive been doing this for hours and hours. My brain is fried LMAO **** I currently have my G2 with S-OFF and a stock Gingerbread 2.3.4. I have the PC10IMG.zip and su.zip in the root or directly in my sdcard. In no folders im trying to say... I reboot into the bootloader. The bootloader will scan for PC10IMG.zip and then ask you if you want to flash the recovery. Yes! You do!
Well when I do it it doesnt ask me to "flash the recovery" it says "Parsing....(SD ZIP)
(1) RECOVERY
Do you want to start the update?
<VOL UP> YES
<VOL DOWN> NO
I accept the update by pressing vol. up. It comes back and says Update comeplete... - OK
Press Power to Reboot
I reboot and get into clockworkmod it says click "install zip from sdcard" I click it and a little hat appears but it doesnt do anything from there. I let it set a couple of min but still nothing... I have to pull battery out to get it to reboot. help pls....
Sean...
Okay I verified that if you have s-off you will be able to get root back on your phone if you run the RUU.
As expected the RUU did unroot my phone but it didn't touch s-off. So I downloaded CWM 3.0.0.8 from dougpiston.com and changed it to PB31IMG.zip (this has to be a flashable zip file to work) and it loaded from hboot no problem. I then downloaded the latest superuser app using ROM Manager, version 2.3.6.3 efgh, older versions will not work, and just flashed it through recovery. Superuser does not need to be renamed update.zip you can just leave the name as is and select let me choose zip from sdcard and it installs just fine.
Took a while for me to get superuser running again as I had an older version and I could only find the newest version in ROM Manager.
****YOU MUST HAVE S-OFF FOR THIS TO WORK*********************
kzoodroid said:
Okay I verified that if you have s-off you will be able to get root back on your phone if you run the RUU.
As expected the RUU did unroot my phone but it didn't touch s-off. So I downloaded CWM 3.0.0.8 from dougpiston.com and changed it to PB31IMG.zip (this has to be a flashable zip file to work) and it loaded from hboot no problem. I then downloaded the latest superuser app using ROM Manager, version 2.3.6.3 efgh, older versions will not work, and just flashed it through recovery. Superuser does not need to be renamed update.zip you can just leave the name as is and select let me choose zip from sdcard and it installs just fine.
Took a while for me to get superuser running again as I had an older version and I could only find the newest version in ROM Manager.
****YOU MUST HAVE S-OFF FOR THIS TO WORK*********************
Click to expand...
Click to collapse
I can't seem to find a link to to superuser inside ROM Manager. Can you tell me where to locate it?
thanks,
John
under download rom > extras
kzoodroid said:
under download rom > extras
Click to expand...
Click to collapse
You can also get it from here
Thanks to you both. I didn't even click on the Download ROM because it's premium and I'm still getting my feet wet with the whole root thing. I'm off to try the GB RUU w/radio and then re-root.
What if you have s-on?
You can only re-root if you have s-off. S-on blocks you from replacing the stock recovery with a custom recovery and blocks the installation of superuser into the system folder.
Eventually the Unrevoked team will come up with a new way to root phones but this most likely won't happen till the OTA actually starts to drop and people report how they lost root. And then who knows how long it will take them to do it. Could be a few days to a few months.
kzoodroid said:
You can only re-root if you have s-off. S-on blocks you from replacing the stock recovery with a custom recovery and blocks the installation of superuser into the system folder.
Eventually the Unrevoked team will come up with a new way to root phones but this most likely won't happen till the OTA actually starts to drop and people report how they lost root. And then who knows how long it will take them to do it. Could be a few days to a few months.
Click to expand...
Click to collapse
Jeez, can't believe I screwed myself like that. I'm a regular root/flasher, and no idea how to get my fix now..
deadsoulboy said:
Jeez, can't believe I screwed myself like that. I'm a regular root/flasher, and no idea how to get my fix now..
Click to expand...
Click to collapse
I ran the RUU with all expectations of not being able to re-root my phone just so I could test if the OTA would change the security settings on my phone. I also still wasn't sure if I could even get root back if it was still s-off so I was willing to experiment with knowing full well what could happen. From past experience with the Eris and losing root for about 3 months you have to flash these leaks with all expectations that it will break your phone and not sweat it too much if it does as eventually someone will find a fix.
kzoodroid said:
I ran the RUU with all expectations of not being able to re-root my phone just so I could test if the OTA would change the security settings on my phone. I also still wasn't sure if I could even get root back if it was still s-off so I was willing to experiment with knowing full well what could happen. From past experience with the Eris and losing root for about 3 months you have to flash these leaks with all expectations that it will break your phone and not sweat it too much if it does as eventually someone will find a fix.
Click to expand...
Click to collapse
You're absolutely right. I have no doubt in my mind someone will come up with a way to root 2.3 on the INC
Alright, I've got s-off, downloaded the superuser 2.3.6.3 efgh app from the ROM manager butttt... now what? I've tried to boot into recovery but I just get an icon of a phone with an exclamation mark inside of a triangle, which I'm assuming isn't good.
Flash clockworkmod recovery first, then the superuser zip.
I tried that but it gives me an error saying: "An error occurred while attempting to run privileged commands!".
If you flashed the GB RUU and lost root and/or s-off.
Someone correct me please if I'm wrong but couldn't you download the froyo RUU and load it then root and s-off?
Sent from my ADR6300 using XDA App
How are you trying to flash it? I'd recommend getting the 3.0.0.7 (AMOLED) or 3.0.0.8 (SLCD) recovery from www.dougpiston.com. Flash in hboot. Or is that how you're doing it?
deadsoulboy said:
You're absolutely right. I have no doubt in my mind someone will come up with a way to root 2.3 on the INC
Click to expand...
Click to collapse
The Eris had a manual method (race method) for rooting the phone but I could never find one posted for the Inc. It involved having the phone connected to a pc with adb running and then taking out the sdcard and rebooting, at a certain point of the boot process you counted to 4 and then pushed the sdcard back in. If you did it correctly adb was able to connect to the phone and you could slip a custom recovery and su in. It was rather complicated and only a handful of people ever did it correctly myself included and it was eventually replaced by a one-click method. The one-click method still pretty much does the same thing you just don't have to manually remove the sdcard or have the phone connected to a pc. In some ways the Eris has a lot more support from its community than the Inc does probably because it was Verizons first android phone.
k_nivesout said:
How are you trying to flash it? I'd recommend getting the 3.0.0.7 (AMOLED) or 3.0.0.8 (SLCD) recovery from www.dougpiston.com. Flash in hboot. Or is that how you're doing it?
Click to expand...
Click to collapse
I second this it has to be a flashable version (contains android-info text file + the recovery image) to work. I used the 3.0.0.8 file from doug pistons website which is already to go just needs to be renamed PB31IMG.zip and make sure it isn't being named PB31IMG.zip.zip as file extensions can be hidden especially if you are renaming it on a pc. I downloaded it directly to my phone and renamed it there so the extension wasn't hidden.
swskeptic said:
Alright, I've got s-off, downloaded the superuser 2.3.6.3 efgh app from the ROM manager butttt... now what? I've tried to boot into recovery but I just get an icon of a phone with an exclamation mark inside of a triangle, which I'm assuming isn't good.
Click to expand...
Click to collapse
I beleive that is becasue you stil have the stock recovery? Did you flash the clockwork recovery from dougpiston.com?
I flashed the clockwork mod recovery 3.0.0.7 from dougpiston via hboot.
I tried several different ways to boot into recovery to flash the superuser app but it isn't working. When I try to do it from the clockword mod app it says the same error: "An error occurred while attempting to run privileged commands!".
I tried to manually download the superuser .zip and boot into recovery from the hboot menu, but it still gave me that same phone icon with the exclamation mark and triangle and then nothing.
swskeptic said:
I flashed the clockwork mod recovery 3.0.0.7 from dougpiston via hboot.
I tried several different ways to boot into recovery to flash the superuser app but it isn't working. When I try to do it from the clockword mod app it says the same error: "An error occurred while attempting to run privileged commands!".
I tried to manually download the superuser .zip and boot into recovery from the hboot menu, but it still gave me that same phone icon with the exclamation mark and triangle and then nothing.
Click to expand...
Click to collapse
First thing are you getting into recovery from the hboot menu? And you can't get into recovery from ROM Manager because you need superuser installed to do it that way. It still sounds to me like you don't have ClockworkMod Recovery installed. Maybe only version 3.0.0.8 works I'm not sure but that version is for both amoled and SLCD screens. So either try reflashing your copy of 3.0.0.7 or try flashing 3.0.0.8. I do think I had to flash the recovery a couple times to get it to stick.
Hi about 10 months ago I rooted my Wildfire with no problems using Turkeys ultimate guide from these forums.
I have got apps to sd, live wallpapers running, and all is good. However my phone is still S-on and the H Boot version is 0.80.0002.
When I was playing around with the settings in SetCPU it informed me that the binary was out of date and to update it, but when i tried it would not update as the phone is still S-on.
My question is can I S-off using Revolutionary as it is already rooted? Obviously I will back up using clockworkmod, but if I s-off the phone are there any obvious advantages apart from being able to update the binary in SetCPU?
Thanks
Are you talking about an outdated Superuser Binary? If so, you can download the latest binary here:
http://tinyurl.com/63tsg9c
And simply flash it in Clockworkmod Recovery. This will give you the updated binary and SetCPU should work fine again.
If you have to get S-OFF, then, you will have to apply the official Froyo RUU and update your HBoot to 1.01.0001 because Revolutionary doesn't support any other HBoots, including 0.80.x. Advantages include a writeable /system partition (Which enables you copy paste stuff in the /system folder on a running handset, one case in point is precisely what you described. This will allow updating of the binary), and the other advantage is enabling of Fastboot commands, which allows you to flash stuff like radio's, recoveries, nandroid backups etc directly to the phone without using Clockworkmod Recovery.
Tl;dr - You will have to completely format your device, install official Froyo, and only then can you obtain S-OFF
And simply flash it in Clockworkmod Recovery.
When you say simply flash it in Clockworkmod recovery, what do you mean? And when you say apply the official Froyo RUU and update the HBoot how can I do that as I am running Wildpuzzle ROM at the moment and it says there are no updates available, so can you explain in simple terms what steps to take?
Thanks
Flash in Clockworkmod Recovery - Same way as you installed your WildPuzzle ROM ZIP file. Turn off phone, start using Vol Down + Power, then navigate to RECOVERY, Press Power Button. Here, select "Install Zip from SDCard", then browse to "Select Zip from SDCard", and select the Zip file I linked above.
This entire process is called "flashing".
If you are still interested in getting S-OFF:
- Download the EXE WWE Froyo 2.22.405.1 RUU from here:
http://shipped-roms.com/index.php?category=android&model=Buzz
- Connect your Wildfire to your PC, run it. It will automatically proceed and perform the required steps.
- If you get s Customer ID 131, you will need to create a Goldcard using your SDCard. This an be done using GoldcardTool. The required steps and download can be found here:
http://android.modaco.com/topic/308798-pc-application-goldcardtool/
IMO, I would not recommend you to go for S-OFF since it doesn't seem you are too much inclined to stuff like these (It is not a necessity. Besides, once /system is writeable, it is a two edged sword. Messing something up there will likely cause your phone to not boot). Further, it breaks certain functions on Sense ROMs which needs an additional fix found here:
http://forum.xda-developers.com/showthread.php?t=1156713
hey man, you could also try the test version of unrevoked 3.2 and run that to s off your phone. it works on your h-boot ( i know as i have the same)
since i am new the forum wont let me post the link, its to sstop spamming :/ just search for unrevoked test 3.2 ( it has to be test 3.2 because the others wont work on the hboot to my knowlege. :/)
just download the program and run it and it should do it with no hassle.
good luck
heavy_metal_man said:
hey man, you could also try the test version of unrevoked 3.2 and run that to s off your phone. it works on your h-boot ( i know as i have the same)
Click to expand...
Click to collapse
That's totally incorrect. Rooting with Unrevoked =/= S-OFF. Besides, on the very first line the OP says he has rooted his phone using Unrevoked.
ah, sorry about that i was looking at unrevoked forever :/ just ignore me ........
Greetings all.
I have a HTC Tattoo still running with the original Android 1.6 that came with the phone. I am trying to install the latest CM7.1.0.1 but have run to a few issues due to how old the Android version is.
I had some issues here, but I was able to install Universal AndRoot and Superuser. So, the phone is fully rooted at this point.
Since the phone is running Android 1.6, Rom Manager Free will not install, since the current version does not support this version of Android. Therefore, I am unable to install ClockworkMod Recovery in this way.
I tried finding older versions of Rom Manager that support Android 1.6, but when I tried installing them, the message I got was "com.koushikdutta.rommanager could not be installed on this phone". I could not get past this...
So, I tried the manual way through adb, using Cyanogen wiki. Through this way, I am only able to get up to the point I try gaining superuser rights using the "su" binary provided. At this point, I get the following error: "su: permission denied".
My question is: is there any other way I can flash ClockworkMod Recovery?
Thanks in advance.
Hi all,
I am stuck with the same problem.
I used the one-click-root app provided in this forum -> worked.
but due to android 1.6 am not allowed to install the rommanager app.
and with ADB I am stuck- -> getting same error as above: su permission denied.
I hope anyone can guide me though the installation of the clockwork recovery.
thx
-------------------------------------------------------------------------------------------
Update:
i think i am one step further now. i installed rommanager 3.0.1.7 (found in the internet), which installed the clockwork recovery.
when i go to "download rom" it says i need a newer version
i downloaded the rom manually, coppied to sd and selected in rommanager "install from sd"
system rebooted and showed my phone and a triangle (with power+home i come into a menu)
anyone can help me here to flash the rom?
Rommanager did not install clockworkmod, i think there was a su issue...
Did you try this instructions?
Goldcard creation: http://forum.xda-developers.com/showthread.php?t=603286
Rooting&installing clockworkmod 5: http://forum.xda-developers.com/showthread.php?t=950759
THX bro, you really saved me from a sleepless night
finally after 3 days of battling my tattoo I upgraded from 1.6 to 2.3.7!!!
your links made it! thx again bro
and nice work developers! thumps-up XD
So, finally you can download normal apps for android 2.1+, 2.2+ 2.3+
Hi again,
I finally have some time to try this again. But before I do anything, do I have to create the goldcard? Because the htc is already rooted, so I was thinking maybe I only need to perform the last part of it, which is installing ClockworkMod.
Thanks again!
No, you dont need to create goldcard again
Goldcard
Hello lemmymet,
You said I don't need to create the goldcard again. But I never created a goldcard... I have superuser through Universal Androot... unless this creates a goldcard automatically for you.
Regardless, the attempt to install only recovery failed. It gave an error saying it couldn't copy 'su' file, probably because there already is one.
Any other suggestions?
Thanks again.
ulaikamor said:
Hello lemmymet,
You said I don't need to create the goldcard again. But I never created a goldcard... I have superuser through Universal Androot... unless this creates a goldcard automatically for you.
Regardless, the attempt to install only recovery failed. It gave an error saying it couldn't copy 'su' file, probably because there already is one.
Any other suggestions?
Thanks again.
Click to expand...
Click to collapse
Hey.
you realy dont need o goldcard.just leave this step away.
here are some how to videos,i think they will help you out.
http://forum.xda-developers.com/showthread.php?t=705454
ulaikamor said:
Hello lemmymet,
You said I don't need to create the goldcard again. But I never created a goldcard... I have superuser through Universal Androot... unless this creates a goldcard automatically for you.
Regardless, the attempt to install only recovery failed. It gave an error saying it couldn't copy 'su' file, probably because there already is one.
Any other suggestions?
Thanks again.
Click to expand...
Click to collapse
Following post and the messages around it, should help you flash clockwork with universal androot
http://forum.xda-developers.com/showthread.php?p=18225026#post18225026
goldcard is needed only to overcome CID check
[CID - Carrier identifier, used in locking a phone to a specific carrier's SIM cards]
with goldcard you can flash unbranded RUU, so that you can get rid of mobile carrier specific junk (for example in my case orange junk).
and you dont need it for rooting and recovery flashing.