Related
My tab was working fine last night, now for some reason, it wont turn on at all....anyone else see this happen, and if so, what did you do?
Probably a dumb question but did you try charging it for a few hours? Maybe the battery is dead.
What did you do with the tablet before this happened?
Thanks for asking.....so here is a brief history. Working fine last night. Set it aside for a couple of hours. Went back to it, but it was off, and it wouldnt start up, so I also thought maybe the battery died. I plugged it in for the night, but this morning, it still wont turn on. Very perplexed.
Hmmm. If you've tried charging it and it still doesn't work then it's probably dead and you should have it replaced.
yeah...Im at work so when I get home I will plug it in again and see if there is any change. Otherwise, its going back.
Haveu tried pressing the reset button in. Never not had it turn on but a few time the screen would not respond to touch
Sent from my Nexus S 4G using XDA Premium App
Yeah, tried the reset but with no luck. Talked to Acer and they suggested checking to see if maybe the plug is out a bit and didnt charge it last night, but I just called home and my wife says the charger is fully plugged in. Very odd. This one may be going back to Amazon.
Also, try holding the power button for about 15 seconds, then let go. Then do it again for about 8 seconds. If it's actually on but unresponsive the first time will force it off. The second time would turn it on.
Darn....my hopes were high....but nothing. Considering it was working perfectly last night, this seems so odd.
I've had this happen to me. I just held the power button for like half a minute before it decided it wanted to turn on. Stupid bug
Shoot...nothing on that either. I appreciate everyones input though.
Crazy....got home, plugged it in and turned it on. Working. Go figure.
The power button is hit for miss.
Here's a video:
http://www.youtube.com/watch?v=4E6FXZqW8hg
reset button
To get the reset button to work you have to really push it in hard Go get it to move
My power button as well seems. Buggy thou I never turn my tab off .its been on since April 24th the day I got it. Sometimes it has needed tonne restarted. The power button often needs to be held tightly in for over a minute. I once thought my tab was not coming on .Indo think its software not the physical button
Just my two pennies
Editing this as I'm desperate for help and things have moved on since I first posted, below is where I am up to post 11 of this thread.
I flashed Vegacomb b (exe), it restarted but stayed on the warning about paying for vegacomb for 10-15 minutes which didn't seem right so I held power for 6 seconds and it turned off. After that it would never turn on or go into recovery (I know all the methods, none worked).
Today I unhooked the battery, when I plug the battery back in the screen comes on for a second but then it's as it was, unresponsive. HOWEVER, if I plug the mains in with the battery disconnected then it immediately tries booting but still sticks at the warning (left for over 20 minutes). If I plug the battery in while on this screen then remove the mains it stays on. The power button is unresponsive through this so I still cannot get into recovery.
Any more ideas that haven't been mentioned?
I've tried well over 100 times to get into recovery but it's not happening
anyone willing to have a go at fixing (cheaply!) if I send them it?
Original Post:
Hi guys, just managed to (re?) install Vegacomb (b, from exe), it restarted but stayed on the white screen with the warning text about paying for Vegacomb for over 10 minutes so I held down the power button to turn it off, now I cannot do anything to boot it up (tried holding power button down from 0.5 seconds to 60 seconds!), it also won't boot into recovery. Is there anything at all that can be done to get this going?
cheers
OK, I've tried holding down back while plugging in (fully charged btw), tried all variations of button presses with back and power, with and without USB, with and without power cable.
Only got until 10PM (UK time) to get this sorted (it's now 6PM) so any help/advise would be appreciated
Flash back to modded stock then try again.
From modded stock go app drawer and run recovery
From recovery wipe data, cache then go advance then wipe dalvik
Then press back
Then install zip from SD
Choose vegacomb from whatever directory on your SD you copied it to then confirm
If you ain't Got Vegacombe zip then download it.
Or you could run the .exe again but the above is my preferred method.
Also you might need to download modded stock v2 if you ain't already got it.
Good luck.
intel007 said:
Flash back to modded stock then try again.
From modded stock go app drawer and run recovery
From recovery wipe data, cache then go advance then wipe dalvik
Then press back
Then install zip from SD
Choose vegacomb then confirm
If you ain't Got Vegacombe zip then download it.
Or you could run the .exe again but the above is my preferred method.
Good luck.
Click to expand...
Click to collapse
??
the Vega won't turn on and won't go into recovery, cannot flash anything, nothing comes up on PC, tried all variations of the back and power buttons (inc back, plug in power & usb, press power, leave 2 seconds and release back) over 100 times. it's like it's dead.
the only thing it does is show a blue LED when I plug the power cable in
I've read that if you got less than 50 or 60% battery it wont go into flash mode (back button 2 seconds - power & back 2 seconds)
Have you got enough battery cause mine takes half a day to charge.
intel007 said:
I've read that if you got less than 50 or 60% battery it wont go into flash mode (back button 2 seconds - power & back 2 seconds)
Have you got enough battery cause mine takes half a day to charge.
Click to expand...
Click to collapse
100% (solid blue LED), been on charge for over 24 hours
I'm baffled mate, I've had same issue couple of times but after 10mins or so I've always got it to power back on.
Bricked
I've had the same problem and although quite drastic, remove the rear cover and unplug the battery connection (the multipin one with red and brown/black wires).
With the mains plug out,i found that if you press volume up and power with the wires unplugged and leav eit for a few mins then use back + power it will start as you need it to.
It may take a few tries but i have managed to do it following this procedure about 7-8 times.
Hope this helps.
DAve
I had trouble getting into recovery when the Vega was 100% charged (i.e. charge led was solid blue). When I let it discharge a little so it was flashing with the charger plugged in, I managed to get into recovery then.
dmarchant said:
I had trouble getting into recovery when the Vega was 100% charged (i.e. charge led was solid blue). When I let it discharge a little so it was flashing with the charger plugged in, I managed to get into recovery then.
Click to expand...
Click to collapse
I can't discharge it though as it doesn't turn on, left it 14 hours from last night, back at work again now and it still says fully charged
got the battery disconnected now to give it a try
Disconnected battery for around 10 minutes, put it all back together, still can't boot or get to recovery
EDIT: it works when the battery is disconnected (goes to the Vegacomb warning screen but no further, cannot power off or get to recovery still)
any ideas?
Anyone got any ideas?
it's meant to be unbrickable from what I've read so there must be a way around it but I'm out of ideas!
its user error. remeber to put it into recovery mode you need the power cable plugged into it too as well as usb.
slybunda said:
its user error. remeber to put it into recovery mode you need the power cable plugged into it too as well as usb.
Click to expand...
Click to collapse
Cheers, but its not user error. I'm not that stupid
Hi, this may not help but i had trouble flashing the stock rom because of the battery being fully charged, could only get the screen to light up so left it over night and then went through the normal routine and got into recovery.
Bill
Hi there
Just one question, how do you know for sure it hasn't gone into nvflash mode?
I know what you are going through trying to get the ruddy thing into nvflash, it's a mare if you don't quite get that timing right but seeing as the screen doesn't light up when it's in nvflash what is telling you whether you are actually in it, other than the screen coming on to say you are not or relying on a windows message?
As I said I had the same problems many a time but I use Audi tool now to tell me if nvflash has started, I got it off the Modaco forum, but when you are in nvflash it actually tells you so rather than relying on perhaps windows to tell you it has happened
If you haven't come across the audi tool before then just do a search for it on Modaco, I don't know if they have got it here on XDA.
mmace said:
Anyone got any ideas?
it's meant to be unbrickable from what I've read so there must be a way around it but I'm out of ideas!
Click to expand...
Click to collapse
wow, i'm quite surprised by the number of people who are taking their batteries out when they think there is a problem. You should never need to do this unless it is actually faulty.
Ok yes the Vega is nearly indestructible I have had my in a complete mess many times and have never had to do anything that hard to recover. Some times it will be a pain to get into nvflash mode but this can always be done just have to be patient and know a couple of tricks.
If you have tried the back button and then the power a few times and nothing there is another method.
Instead unplug the power then hold the back button down, whilst holding down the back button plug in the power release the back button after a couple of seconds (I like to count to 5)
I am hoping that you already have the USB cable connected and the right drivers installed on your PC.
Billy..
If you need more help head over to TabletRoms and look in the Vega forum (sorry XDA guys just there is a lot of other useful information there)
wks said:
Hi, this may not help but i had trouble flashing the stock rom because of the battery being fully charged, could only get the screen to light up so left it over night and then went through the normal routine and got into recovery.
Bill
Click to expand...
Click to collapse
I've tired fully charged and letting the battery drain for 40+ mins after it's been on the "warning" screen
mitt69 said:
Hi there
Just one question, how do you know for sure it hasn't gone into nvflash mode?
I know what you are going through trying to get the ruddy thing into nvflash, it's a mare if you don't quite get that timing right but seeing as the screen doesn't light up when it's in nvflash what is telling you whether you are actually in it, other than the screen coming on to say you are not or relying on a windows message?
As I said I had the same problems many a time but I use Audi tool now to tell me if nvflash has started, I got it off the Modaco forum, but when you are in nvflash it actually tells you so rather than relying on perhaps windows to tell you it has happened
If you haven't come across the audi tool before then just do a search for it on Modaco, I don't know if they have got it here on XDA.
Click to expand...
Click to collapse
I have Audi, I also have Device manager open, I know 100% it's never gone into recovery mode sine I started with this problem.
BillyFish said:
wow, i'm quite surprised by the number of people who are taking their batteries out when they think there is a problem. You should never need to do this unless it is actually faulty.
Ok yes the Vega is nearly indestructible I have had my in a complete mess many times and have never had to do anything that hard to recover. Some times it will be a pain to get into nvflash mode but this can always be done just have to be patient and know a couple of tricks.
If you have tried the back button and then the power a few times and nothing there is another method.
Instead unplug the power then hold the back button down, whilst holding down the back button plug in the power release the back button after a couple of seconds (I like to count to 5)
I am hoping that you already have the USB cable connected and the right drivers installed on your PC.
Billy..
If you need more help head over to TabletRoms and look in the Vega forum (sorry XDA guys just there is a lot of other useful information there)
Click to expand...
Click to collapse
TabletRoms has been no help for me, there's been no reply at all for my problem but there has here and at MoDaCo. I pulled the battery as a last resort as NOTHING is working, I've tried all the tricks at least 2 dozen times, some a hundred +, including the one you mention
Well I don't want to teach you to suck eggs, but I take it you did use Audi to delete and replace your drivers.
And then when powering on the Vega you held the back button for 2 secs and then the back and power buttons for 6 secs to get the Vega detected?
For me I can only see that there can only be 3 other possible causes
1./ the back button is broken on the vega
2./ The USB port on your PC or on the Vega has gone up the swanee
3./ The USB lead is no good
The Vega may be unbrickable but if the back button or the USB port has had it then .....
Yeah, tried it, cheers.
Hey everyone, Im having a problem thats making me worry. I was using my phone today and for some reason the phone wont turn on after I turned it off. I havent dropped the phone at all and it hasnt been abused in any way. The last thing I was doing before I turned it off was trying to send feedback for the Yahoo Mail app because it wouldnt sync automatically, but even that was unsuccessful because it wouldnt send. So I thought I should just reboot it but afterwards its not turning on at all.
I tried holding the power button for at least 20 seconds and still nothing is happening, and I tried plugging in the power cord to see if that would help but it hasnt. Has anyone gone through a similar issue? Please Help
Thanks.
Leave it plugged in for fifteen minutes without touching it.
Sent from my Nexus 4 using Tapatalk 2
Try holding volume up + power to see if you can get into recovery then reboot from there.
Also, give some more details about your setup...
Rooted/Stock/What Rom/Kernel?
Yea I left it alone for a bit and then I held the power button while holding down both volume rockers and somehow it turned on. I dont know why this happened but I'm just glad it turned back on, it gave me a good scare though. I just hope it doesnt happen again
Mine is completely stock, I havent done anything with it yet
And may I ask what was your battery percentage level like after the short charge? Maybe the phone drained it all just being turned off... There were some cases of this here...
i wanted to add that i had a similar problem with my phone not turning back on. However, I managed to fix what was wrong by just plugging in the usb cable. I know you've tried it, but just in case someone else stumbles upon this thread (like me!) and has a problem turning on their nexus, I wanted to share my experience.
I haven't done anything to my phone other than add my old apps to my Nexus since I received it 1.5 weeks ago. It's stock. I've never dropped it or gotten water on it or anything. I charged it overnight last night and stuck it in my purse on the way to work. I think I briefly saw a working screen after I unplugged it this morning. However, the first time I tried to access my phone today was after I got to work. It wouldn't turn on, though that pinkish light at the bottom was still blinking. I tried calling it and the Nexus wouldn't ring even though the call went through a few rings and then onto voicemail. I tried holding down the power button for a while and also holding the power button with the volume keys to see if that would work, and it did not. Finally I borrowed a usb cable to plug it in, hoping the jolt of power would wake it up. That worked. It gave me the charging symbol for a little bit and then gave me the startup/loading screen with the glowing x made of arrows. I checked my battery and it was at full charge. Well, it was at 85%, which is odd since I plugged it in for about 9 hours last night to charge and there has only been 3 hours of non-use since I unplugged it. Also, if it was really turned off during those 3 hours it shouldn't have ate up any battery. Anyway, I just wanted to throw in my 2 cents in case anyone else has this problem. My brother, who gave me the Nexus, told me that he only has 2 weeks to return it if there's something wrong with it or I don't like it. Needless to say this gave me a scare, since the 2 weeks is almost up.
Money2g said:
Hey everyone, Im having a problem thats making me worry. I was using my phone today and for some reason the phone wont turn on after I turned it off. I havent dropped the phone at all and it hasnt been abused in any way. The last thing I was doing before I turned it off was trying to send feedback for the Yahoo Mail app because it wouldnt sync automatically, but even that was unsuccessful because it wouldnt send. So I thought I should just reboot it but afterwards its not turning on at all.
I tried holding the power button for at least 20 seconds and still nothing is happening, and I tried plugging in the power cord to see if that would help but it hasnt. Has anyone gone through a similar issue? Please Help
Thanks.
Click to expand...
Click to collapse
Yes this happened to me the other night. I was making a phone call and accidentally hit the power button. I then tried to turn the screen back on in order to hang up the phone and it would work. I tried holding the button for 15 seconds, tried pressing the volume up/down keys, and still nothing. I then put it back in my pocket for a minute or so and tried again. When I did that the screen came back on and the call was still active. Very strange, and I hope it doesnt happen again....
Money2g said:
Hey everyone, Im having a problem thats making me worry. I was using my phone today and for some reason the phone wont turn on after I turned it off. I havent dropped the phone at all and it hasnt been abused in any way. The last thing I was doing before I turned it off was trying to send feedback for the Yahoo Mail app because it wouldnt sync automatically, but even that was unsuccessful because it wouldnt send. So I thought I should just reboot it but afterwards its not turning on at all.
I tried holding the power button for at least 20 seconds and still nothing is happening, and I tried plugging in the power cord to see if that would help but it hasnt. Has anyone gone through a similar issue? Please Help
Thanks.
Click to expand...
Click to collapse
Same thing is happening to me right now.
Running stock. Not rooted. Phone charge was around 70% and I was on twitter and the app force closed. So I decided to restart my phone then went to turn it back on and it wont respond. Tried holding down the power button for 20 sec. Volume up and power, volume down and all 3 at the same time. Still nothing. Leaving it on the charger for awhile and the screen is blank no battery logo or anything.
Not quite sure what to do now?
That's scary
shotlimesalt said:
Same thing is happening to me right now.
Running stock. Not rooted. Phone charge was around 70% and I was on twitter and the app force closed. So I decided to restart my phone then went to turn it back on and it wont respond. Tried holding down the power button for 20 sec. Volume up and power, volume down and all 3 at the same time. Still nothing. Leaving it on the charger for awhile and the screen is blank no battery logo or anything.
Not quite sure what to do now?
Click to expand...
Click to collapse
Plug it in with the original charger, leave it alone for a couple of hours, try again.
Sent from my Nexus 4
I get the same. I use Dophin Browser . After that i reboot my Nexus 4.
I try to hold Power Button for 1 minutes or more. But nothing change. I
I try hold Power + Volum Down - or Volum + but get same result.
I plug in Adater and wait for it. I will check it 2 hour later.
My Nexus 4 use Stock Rom, Rooted. and this first i get this problem. Please advise me on this case. Thank
:laugh:
I'm having similar problems. Lots of random rebooting and refusals to turn back on sometimes, even though the LED at the bottom is flashing so i know the phone is still powered up. Also, sometimes when i have it plugged into a computer through usb it will get extremely hot and completely shut down, not turning back on for a long time. I called the google play store and someone is going to get back to me. I love my nexus 4 so i hope i can get this fixed or a replacement.
Nexus 4 crashed and would not power on
shinobi-wan said:
I'm having similar problems. Lots of random rebooting and refusals to turn back on sometimes, even though the LED at the bottom is flashing so i know the phone is still powered up. Also, sometimes when i have it plugged into a computer through usb it will get extremely hot and completely shut down, not turning back on for a long time. I called the google play store and someone is going to get back to me. I love my nexus 4 so i hope i can get this fixed or a replacement.
Click to expand...
Click to collapse
I had this issue too a couple of times playing Pandora through my car's Bluetooth. That was when the Nexus 4 had 4.2.1. I have not had this issue with Pandora since the upgrade to 4.2.2.
However, I just now had this issue with Movie Studio app and exporting a video I edited. It turned off its screen like normal screen timeout but then would not come back on.
I had to Volume Up + Power button for a few seconds and then release to get it to reboot.
This same thing is happening to me. Haven't found a specific cause...
Just got the same issue
Today got mine not turning on.
Managed to turn it on by holding volume up and power button together for about 30 seconds while phone was on a stock charger. After that I saw blinking orange led. When I resolved buttons there was a battery pictogram. After pressing and holding power button I finally got turning on vibration and Google logo.
The only things a made after the charging were making few photos of my cat (from the lock screen) viewing them in gallery. Then I locked the screen and put the phone on a shelf. In a hour I was not able to turn it on.
My phone has stock rom and only few third party apps installed.
I got muy Nexus 4 on 21-Dec-2012. 4 days ago I flashed to Android 4.2.2 which phone dowloaded itself. After flashing phone was rebooted.
What I noticed is that it shows 70% battery. But It was fully charged few hours ago.
30% in 2 hours! In my opinion some service/app drained these 30% by using 100% of processing power that caused overheating and/or hanging.
I too have just had this problem. And I've had it previously when making calls, the screen simply won't respond at all, its quite annoying.
This morning my alarm went off and the screen wouldn't turn on, it went on for so long I almost threw the phone across the room. I eventually held the power button and volume down/up button and then the led blinked orange a few times and the phone reset, now it seems fine.
Its a very annoying problem, and could be very serious depending on what you are doing, might have to phone the play store and tell them.
Money2g said:
Hey everyone, Im having a problem thats making me worry. I was using my phone today and for some reason the phone wont turn on after I turned it off. I havent dropped the phone at all and it hasnt been abused in any way. The last thing I was doing before I turned it off was trying to send feedback for the Yahoo Mail app because it wouldnt sync automatically, but even that was unsuccessful because it wouldnt send. So I thought I should just reboot it but afterwards its not turning on at all.
I tried holding the power button for at least 20 seconds and still nothing is happening, and I tried plugging in the power cord to see if that would help but it hasnt. Has anyone gone through a similar issue? Please Help
Thanks.
Click to expand...
Click to collapse
This has happened to me twice now. First time was a month ago and the second time was this morning. Phone was at 100% just woke up checked my messages turned off phone 10 min later it will not turn on. Un plugged cord re plugged cord nothing finally pressed up/down vol and power for about a minute (long minute) and the phone rebooted. YIKES!
Every thing seems normal now but I hate that scare and the fact that it has happened to me twice. Full Stock, not rooted.
zz_zz_ said:
Today got mine not turning on.
Managed to turn it on by holding volume up and power button together for about 30 seconds while phone was on a stock charger. After that I saw blinking orange led. When I resolved buttons there was a battery pictogram. After pressing and holding power button I finally got turning on vibration and Google logo.
The only things a made after the charging were making few photos of my cat (from the lock screen) viewing them in gallery. Then I locked the screen and put the phone on a shelf. In a hour I was not able to turn it on.
My phone has stock rom and only few third party apps installed.
I got muy Nexus 4 on 21-Dec-2012. 4 days ago I flashed to Android 4.2.2 which phone dowloaded itself. After flashing phone was rebooted.
What I noticed is that it shows 70% battery. But It was fully charged few hours ago.
30% in 2 hours! In my opinion some service/app drained these 30% by using 100% of processing power that caused overheating and/or hanging.
Click to expand...
Click to collapse
Happened second time.
I was able to turn it on again by following the same steps. But this time I got some strange issue: after resolving vol+ and power buttons I saw battery pictogram with some frame with a blue background; when phone finally booted up this frame and blue background were visible through the my desktop background an screen itself was much lighter with pure colors. Only after about 5 soft resets screen seems to became nice again. Each reboot caused blue frame to become less visible. I'm confused and worried.
Also during all these reboots this frame with blue background was visible even in behind "Google" and "X" logos during booting up.
Another strange thing is that on screenshots I made this frame is not visible.
That would have to do with LCD or software..
As the battery & Google are just pictures that change. If you understand what in saying lol ?
Nexus⁴
Hello to all experts.
1- Accidently my wileyfox storm battery was fully drained at night and i was not at home during that time.
I connected mobile to wall outlet it was showing red colour on home button when connected (as a battery charging indication) but after near about 8 hours i tried to turn it on but no luck. I pressed power button for many seconds, many times but no luck.
Now what should I do to turn on my wileyfox storm.
2- My second question is how to open back cover of my wileyfox storm. i did not find any notch or point to open back cover to see inside.
Thanks in advance.
Plug your phone on charge but not in usb, and wait about 20mn
I am having this problem as well right now, how did you fix it?
I too have the same problem , it was off because drain , but then put in office is no longer lights . the light is always red . what can I do?
Leave it charging for a while from the mains. Red light means charging on low charge, the screen doesn't turn on until it has some charge.
it is normal to be in power for eight hours, and nothing has changed ? Red light always on and off screen
rugabella said:
it is normal to be in power for eight hours, and nothing has changed ? Red light always on and off screen
Click to expand...
Click to collapse
Have you tried holding down the power button now?
Johndawolf said:
Have you tried holding down the power button now?
Click to expand...
Click to collapse
yes , and unfortunately nothing happens . problems that can have ? He does not get the charge? because it comes on the same spy and it is always red ? the phone has just three months
for anyone who is interested I solved !!! simultaneously press power button and volume less for about 20 seconds and the phone switches
rugabella said:
for anyone who is interested I solved !!! simultaneously press power button and volume less for about 20 seconds and the phone switches
Click to expand...
Click to collapse
Im dealing with the same problem from morning. Im going to try your solution by 10 minutes.
ijaz1976 said:
Hello to all experts.
1- Accidently my wileyfox storm battery was fully drained at night and i was not at home during that time.
I connected mobile to wall outlet it was showing red colour on home button when connected (as a battery charging indication) but after near about 8 hours i tried to turn it on but no luck. I pressed power button for many seconds, many times but no luck.
Now what should I do to turn on my wileyfox storm.
2- My second question is how to open back cover of my wileyfox storm. i did not find any notch or point to open back cover to see inside.
Thanks in advance.
Click to expand...
Click to collapse
I am no expert, but I've had the same problem after fully running the phone battery down. While looking for an answer I managed resolve the issue by to hold the power down and down array while the phone in chagrining for around 2 minutes and the phone started up, almost by complete accident.
rugabella said:
for anyone who is interested I solved !!! simultaneously press power button and volume less for about 20 seconds and the phone switches
Click to expand...
Click to collapse
Hi rugabella
please guide me
I have same problem
since 17:30 today my storm battery drained and when i put it in charge LED light RED
it not Happened before , until now (20:44) phone is in charge and LED light is red
I tried time to time the key combination you mentioned (Power + volume Down) but nothing happens
now I'm waiting for more time to spent charging
Can you or someone else help me more?
tiosus said:
Hi rugabella
please guide me
I have same problem
since 17:30 today my storm battery drained and when i put it in charge LED light RED
it not Happened before , until now (20:44) phone is in charge and LED light is red
I tried time to time the key combination you mentioned (Power + volume Down) but nothing happens
now I'm waiting for more time to spent charging
Can you or someone else help me more?
Click to expand...
Click to collapse
16hours and still RED light and nothing else
any help!!!!!!!!!!!!!?
tiosus said:
16hours and still RED light and nothing else
any help!!!!!!!!!!!!!?
Click to expand...
Click to collapse
I had the same issue you are having, battery ran down to empty, charge light would always be red no matter how long it was plugged in, slow charge, fast charge, holding down the power button, even with the inclusion of the vol down, nothing worked.
I fixed it by opening up the phone and disconnecting then reconnecting the the battery. After doing so the phone started to properly charge (phone booted up and displayed the battery animation). Everything now operates as normal, though I won't be letting it drain to 0% again, that's for sure.
If you're able to, give it a shot and hopefully it will do the trick for you as well (though I'm probably way to late).
Hello to all
I again have the same problem, the battery of my storm has fully discharged, but although is it charging for many hours the LED light is always red and the phone will not turn on. This time even while holding together power button and volume less nothing is happening.
Can anyone help me and tell me how I can fix ?
Level1imp how did you open the phone to disconnect the battery ?
level1imp said:
I had the same issue you are having, battery ran down to empty, charge light would always be red no matter how long it was plugged in, slow charge, fast charge, holding down the power button, even with the inclusion of the vol down, nothing worked.
I fixed it by opening up the phone and disconnecting then reconnecting the the battery. After doing so the phone started to properly charge (phone booted up and displayed the battery animation). Everything now operates as normal, though I won't be letting it drain to 0% again, that's for sure.
If you're able to, give it a shot and hopefully it will do the trick for you as well (though I'm probably way to late).
Click to expand...
Click to collapse
How i did you open up the phone? I'm struggeling with it
Thank you soooo much!!!!
rugabella said:
for anyone who is interested I solved !!! simultaneously press power button and volume less for about 20 seconds and the phone switches
Click to expand...
Click to collapse
After I read your message here, I've tried and finally I solved this problem in my phone.
I was getting crazy because there isn't place to fix this phone in my country and the company Wileyfox wanted me to send my phone to someone in europe to them send to Wilefox to fix it. I've spoke with the company today to see what could they do for me and the solution they gave to me was this and to I try to open the back by myself. But this last solution it isn't a solution because would make me loose the garantee. Why the technician didn't told me about this solution? I'm so disappointed with them.
hi i have a wileyfox storm it is not going on when i press power button .now i connect with wall charger so it show a red circle on the bottom and phone show logo on and of .how can i put it on
This works!!
For anyone who needs it, this also works on wileyfox swift 2
Had this too, but solved
Just had this problem occur on my Wileyfox Swift 2 Plus. Completely drained, left on charge for 4h but it got 0% charged in that time.
For me, hooking it up to a slightly stronger power source (5V 2.1A) USB port of my power bank,
in combination with Power + Volume UP
Got me to a boot screen I'd never seen before.
Hit Fast Boot, it looked like it just turned off again but a few seconds later I saw the normal boot screen pop up
so, i was using my 6P today and it froze for 5/6 seconds and then turned itself off after that i couldn't turn on the phone or enter recovery menu . It also didn't charge when i plugged it into charger also plugging to the pc did nothing. So it was completely unresponsive. then i pressed the power button for 20/30 seconds and it started but again froze during boot animation and again turned off to the previous unresponsive state. I tried this long power button press 3/4 times and finally got it to turn on but it again froze and turned off on the lock screen. Then got into boot loader menu while it was frozen by power + vol down button and flashed stock 8.1 firmware. But it still freezes at boot animation and turns off. Anyone has any idea what i should do?
@RØ35 try a new battery how old is that one your using?
Exodusche said:
@RØ35 try a new battery how old is that one your using?
Click to expand...
Click to collapse
Hey thanks for replying. I thought of battery problem. But the battery was working just fine until the first freeze this morning so i'm not sure this is battery problem. BTW my battery is almost 2 and a 1/2 year old.
Do you think this could be the BLOD isuue?
RØ35 said:
Hey thanks for replying. I thought of battery problem. But the battery was working just fine until the first freeze this morning so i'm not sure this is battery problem. BTW my battery is almost 2 and a 1/2 year old.
Do you think this could be the BLOD isuue?
Click to expand...
Click to collapse
Dude that's old average life span is 2 years. Imagine your charging your battery alot now. Carry around one of those power banks? ??
RØ35 said:
so, i was using my 6P today and it froze for 5/6 seconds and then turned itself off after that i couldn't turn on the phone or enter recovery menu . It also didn't charge when i plugged it into charger also plugging to the pc did nothing. So it was completely unresponsive. then i pressed the power button for 20/30 seconds and it started but again froze during boot animation and again turned off to the previous unresponsive state. I tried this long power button press 3/4 times and finally got it to turn on but it again froze and turned off on the lock screen. Then got into boot loader menu while it was frozen by power + vol down button and flashed stock 8.1 firmware. But it still freezes at boot animation and turns off. Anyone has any idea what i should do?
Click to expand...
Click to collapse
Hi I am also having same problem I have learned that it's a known if you with this phone it started when they went to Android 7 Google and Hauwei have both been no help Google says to contact Hauwei and they say you have to send it in if they approve it first you need to send photos of all sides and if still in excellent condition they my approve it to be repaired at a cost of just under 150.00 you will need to pay first then they will email a mailer lable you need to clear all passwords and send it in a sturdy box good luck I haven't done it yet my self to get all info you need to contact them by phone