Database Users

[Q] Install magldr 1.13 with 1.11

Hey people
i have magldr 1.11 installed now i want to put in 1.13 but i cant do that
i have win7 on my PC and when i try to install 1.13 i only have de tricolor screen and cant update
i turn off the phone and press -vol and power on and only boot tricolor screen
can anbody help me?
tks

you need to describe the problem better.
You can flash magldr from bootloader, so long as you have hspl, but I can't tell from your question whether you have tried yet.
Put phone into bootloader, connect to usb.
What spl does it say?
does it say usb at bottom of screen? if no, have you plugged the usb cable in?
when you run the magldr romupdateutility does it giove an error? is it a timeout error or a different error?
are you trying to do it through a front panel USB port? or a usb hub? if so (and try this anyway) when it times out, just run it again, if it times out again, then change ports and run it again,

i have magldr 1.11 and dft version of 30 dec
to install magldr what i have to do?

mateuspt said:
i have magldr 1.11 and dft version of 30 dec
to install magldr what i have to do?
Click to expand...
Click to collapse
ok let's try to be more clear on this.
first, have you done the HSPL? Following that, did you put magldr 1.11 on there? now if you can answer yes to both these questions, the steps are easy.
1. press -vol and power until you get the tri-colored screen. in there, you should see hspl 2.08 with cotulla in the upper portion.
2. if so, then you plug in the USB cord and you will see "serial" change to "USB" (assuming of course you have activsync installed and waiting on a connection)
3. when it links up, then you run magldr1.13 installer... once successful, the phone should reboot.
simple as that
done.

thanks now i have 1.13 but now how i install another version of nand android?
when i boot up with vol- and power only shows tricolor screen

first you need flash cwr 1.3 ,for that you need reboot your phone to magldr via hold power button until magldr menu upears.After that select usb flasher via vol down and green button (call button) confirm.And after that you can flash anything nand android by usb flasher in magldr or cwr.

when i reboot phone it goes to magldr booter without choice it goes for my actual version cant choose anything

You must hold power button untill menu apears!

magldr 1.11 to 1.13
I'm trying to update from magldr 1.11 to 1.13 but every time I run the ROM update utility I get "Error [260]: Connection" & "the Update Utility cannot connect to your PDA phone." I have the tri-color bootloader screen, as well as USB on it. I'm already running a NAND Froyo build, just trying to switch to Gingerbread. I've tried searching this forum & the web for help without any success. Any help would be appreciated, thanks!
Angelo

comp is probably using teh wrong drivers.
first off, try a different usb port, one you havent useed before for that phone. if taht doesnt help, go into device manager when usb is connected, find he device (probably called mobile device or something) right click, choose uninstal, then reboot, reconnect the phone, see if it helps.

samsamuel said:
comp is probably using teh wrong drivers.
first off, try a different usb port, one you havent useed before for that phone. if taht doesnt help, go into device manager when usb is connected, find he device (probably called mobile device or something) right click, choose uninstal, then reboot, reconnect the phone, see if it helps.
Click to expand...
Click to collapse
That did the trick! Thanks so much for your help.
Angelo

Task29 maybe can help you!

After MAGLDR 1.13 doesn't boot!

Hi
after i flashed my HD2 with MAGLDR, it doesnt boot anymore!!!
Can some one help me? I cannot connect it to my laptop to flash ist again. Is there a way to get directly in the USB-modus?
Help me please!!!

Jigsaw8989 said:
Hi
after i flashed my HD2 with MAGLDR, it doesnt boot anymore!!!
Can some one help me? I cannot connect it to my laptop to flash ist again. Is there a way to get directly in the USB-modus?
Help me please!!!
Click to expand...
Click to collapse
did you use HSPL before it ??

i flashed it several times before with HSpl but this is the first time it went worg is there something i can do?

Jigsaw8989 said:
i flashed it several times before with HSpl but this is the first time it went worg is there something i can do?
Click to expand...
Click to collapse
do you have HardSPL 2.08 ??? because in magldr thread it is written as required

1. Wrong section -> There's a Magldr topic, search for it.
2. First read, then act?
Have you installed a rom yet? Does the phone boot to Magldr? A little more info is useful..
Booting into bootloader via: turn on the phone, hold volume down key while booting
Booting into Magldr: turn on the phone and keep the power button pressed down untill Magldr comes up.

Not sure...
Its possilbe that i didn´t update it to 2.08. I think i have got 1.42 but im not sure. If I only could connect my phone to my laptop...

Jigsaw8989 said:
Its possilbe that i didn´t update it to 2.08. I think i have got 1.42 but im not sure. If I only could connect my phone to my laptop...
Click to expand...
Click to collapse
Can you get to 3 color screen where it writes hspl version etc. ?? if yes try to install HSPL 2.08 and then the magldr

I have got 1.42. (i think that the problem! Im able to get in the boot loader but not to MAGLDR . I dont hava a NAND version of andird on my phone but i have got a Windows moble rom on it. Is there a possiblity to bot the WM throgh the bootloader that would be all i need!

im able to get in the bootloader (3 colourd screen) but how should I be able to install a new HSPL without a connection to my Mobile device center?

Do it within this way:
1. Make sure you have HSPL 2.08 installed
2. Install TASK29. If you need it search for this.
3. Install "RUU_Leo_S_HTC_WWE_3.14.405.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe" on your device. Do some settings within Windows and SHUTDOWN!!!
4. Press VOL-Down and press POWER ON until you will see the flash boot screen.
5. Now install MAGLDR 1.13 (v. 250MB Edition)
6. IF THIS FAILS - install Windows AGAIN and after all install MAGLDR 1.13 WITHOUT Task29.
Yesterday I have done a complete reset. Installed my O2 firmware and replaced my original bootblock. After all I have had the same problem that MAGLDR won't install on this device. I have tried it with 1.12 and 1.13. NOTHING, device boot until the WHITE HTC logo and nothing more. But ANDROID was installed bevore.
After that procedure I was able to flash MAGLDR 1.13 again.

thanks for your help imm try to do anything you have told me! I flashed HSPL 2.08 and Magldr also started. Thankl so much for your Help. Now i will try to install DiserZ andrid rom!

How is it possible to boot windows with MAGLDR? and how is it possible to remove MAGLDR?

If you want boot WINDOWS ONLY: you don't need MAGLDR.
If you want to delete MAGLDR: just use Task29 ROM.
If you want restore all to default:
1. Download your ORIGINAL ROM from your Provider or HTC.
2. Use 7zip and unpack the EXE file.
3. Search the file "RUU_signed.nbh" and rename it to "leoimg.nbh".
4. Format your SD Card with FAT32 format
5. Copy the "leoimg.nbh" to the SDCARD.
6. Insert Card into your device.
Now search the RESET button right next to the SDCARD slot on the back of your device:
7. Press the RESET button AND VOL-Down and when you see within the display "LOADING..." RELEASE both immediately and follow the instructions on the screen. It might be that you need 2 or 3 times until you got it
!!!! EVERYTHING !!! on your device will be erased after all. If you get an error that you are not able to flash "...bla, bla, bla..." don't cry - just download your OFFICIAL ROM by device serial number on the HTC website.
Unpack this EXE (again), rename the *.nb0 file and just do it again.

[Q] Installation DFT MAGLDR Bootloader 1.13 - PROBLEM

I have a problem with DFT MAGLDR Bootloader 1.13 version. I have HSPL 2.08 version and radio 2.15.50.14 version. I connect my HD2 and synchronize it with my computer but when I run ROMUpdateUtility the device is restarting and the progress bar is on 0% all the time. After about 30 minute the ERROR 262 appears on the screen. But the connection 'HD2->My Computer' is correct. Do you have any idea what the problem is ? Please help me.....
miod3k

Also are you right clicking the RUU and selecting run as adminastrator?

Also are you right clicking the RUU and selecting run as adminastrator?
Click to expand...
Click to collapse
Yes I do this, but it's no take effect.
HELP!!!!!

miod3k said:
Yes I do this, but it's no take effect.
HELP!!!!!
Click to expand...
Click to collapse
Hey, try re-downloading MAGLDR and connecting via another usb port or preferably another system with htc drivers installed...Hope u r flashing thru d bootloader mode and does it show "usb" instead of "serial"?

If you are still having trouble click on the link in my signature that says guide and it tells you step by step how to flash MAGLDR by flashing via bootloader. Also like the post above said try all the USB ports if you have trouble with one.

Hey, try re-downloading MAGLDR and connecting via another usb port
Click to expand...
Click to collapse
I do this but it's no take effect.
Hope u r flashing thru d bootloader mode and does it show "usb" instead of "serial"?
Click to expand...
Click to collapse
It's USB
You can also flash MAGLDR via SD card just like you can a Windows Mobile ROM. Just copy the magldr.nbh file and change the magldr.nbh file name to leoimg.nbh then copy the leoimag.nbh file to the root of your SD card. Boot your HD2 into bootloader and press the end button to comfirm when it ask if you want to flash the image.
Click to expand...
Click to collapse
When I do this, after boot my HD2 into bootloader the screen is white, and sing 'Loading...' is on the screen all the time. I wait about 15 minutes but the screen was no changes
I have a original ROM v 3.14.118.1 maybe this is the problem ?

miod3k said:
I do this but it's no take effect.
It's USB
When I do this, after boot my HD2 into bootloader the screen is white, and sing 'Loading...' is on the screen all the time. I wait about 15 minutes but the screen was no changes
I have a original ROM v 3.14.118.1 maybe this is the problem ?
Click to expand...
Click to collapse
Here r d steps and it has worked countless times...
1. U must have performed a HSPL 2.08 (not 3.03) using HSPL3/4 software. (connect usb & restart in bootloader mode)
2. Perform Task29 by connecting usb & restarting in bootloader mode (This completely wipes your phone memory).
3. Flash MAGLDR 1.13 by powering up in bootloader, connecting usb and running "RUU.exe" as Admin.
Going CWM Way?
4. Flash CWM by launching MAGLDR (Press & hold down d end key), using volume keys, scroll down & select usb flasher...Run "Daf.exe" contained in CWM folder.
5. Copy android build to root of already full-formatted sd card.
6. Enter MAGLDR mode & scroll down to AD Recovery..Enter....CWM should load up.
7. Select "Install zip from sd card".
8. Select d desired build...Enter..Scroll down to Yes, Install.....
9. Flash Away.
10. Wait for successful confirmation then select "reboot phone" ..
ENJOY!!!

2. Perform Task29 by connecting usb & restarting in bootloader mode (This completely wipes your phone memory).
Click to expand...
Click to collapse
I try do this, but after I run task29.exe I have this image on ma screen
And the progress bar was no changes(all the time is 0%). I must remove battery and put it into my HD2 again to run operating system.
Please help!!! :-(

It works!!!! I reinstall HSPL downloaded from another source and MAGLDR was install without any problem.
Thanks all of you for help....
Greetings
miod3k

problem with installation
hi guys ...
i have a problem with the installation ... i did everthing step by step as you can read in this thread http://forum.xda-developers.com/showthread.php?t=893618 ... i have htc hd2 tmo 512, installed hspl 4 (3.03), radio 2.10 ... after that i wanted to install MAGLDR 1.13, but during the installation my device hung up ... without any error ... and now it won't start anymore ... can somebody help me, please? ... thx ...

schnatterinchen said:
hi guys ...
i have a problem with the installation ... i did everthing step by step as you can read in this thread http://forum.xda-developers.com/showthread.php?t=893618 ... i have htc hd2 tmo 512, installed hspl 4 (3.03), radio 2.10 ... after that i wanted to install MAGLDR 1.13, but during the installation my device hung up ... without any error ... and now it won't start anymore ... can somebody help me, please? ... thx ...
Click to expand...
Click to collapse
change the HSPL to 2.08, it will not work with 3.03

but my device doesn't start ... when I push the power button, it hangs up so I couldn't connect it to my pc ...

take the battery out for 30 minutes and then try getting into the boot loader

how can I get into the boot loader? ...

schnatterinchen said:
how can I get into the boot loader? ...
Click to expand...
Click to collapse
hold down the volume key as per instructions when you originally flashed

Remove the cable from your device
try to to open ActivSync settings
and uncheck accept usb connection or something like that ...
reconnect your device again the try flash MAGDLR
i think it wil work for you

thx anyway ... but it won't work ... when I push the powerbutton, my device is vibrating like when it starts normally ... about one second later the tmo logo is fading up and then the diplay is freezing ... there is no other reaction ...

need help
i have installed MAGLDR v1.13 on my HTC HD2
Phone have rebooted after installation finished, but DFT MAGLDR Bootloader have not loaded after these (
now i see only a white screan with the green text: ''HTC'' on it
please can somebody help me?
Ps : i had the correct radio ROM
HSPL 3.03
Radio 2.15

[Q] Can't get the Rom update utility to work

Hi,
I want to instal WP7 on my HTC HD2.
In the tutorial i use i should use the Rom update utility to get MAGLDR on my phone.
When i try to use this utility i don't get further than 0% and after some time i get a error (error 626)
What i did is:
- I reseted my HTC HD2.
- I started the Rom update utility. It says that i need a update from 1.66.404.1 to 2.00.000.0.
- So when i start this it will restart my phone and show me a progres bar.
This will stay on 0% and after 10 minutes the utility gives me a message that says:
You connection is lost(error 626). Than i need to "recover" my phone by taking the battery out and put in in again.
When i do this it wel restart my phone with the WM6.5 so nothing happend.
I tryed the following things:
- A different usb cable and usb port.
- redownload the Rom Update Utility from this site.
- Hard reset my phone.
Nothing happend a still geth the same error.
Does someone know how to fix this?
Or is there a defferent way to install WP7 on my HTC HD2.
Thanks,
Maarten

read tutorial from my signature

I will try that thanks.

I finished step 0.5 and 1.
But when I am at the line "When phone boot in MAGLDR use:"
I get stuck.
The MAGLDR is installed but when the phone restart i get stuck on the white HTC screen.
Any clou what i should do next?

if not boot, press and hold power button to start magldr....

I tryed it but it wont do anything else than go to the white boot sreen with the Green HTC logo.
I tryed to press the power button for a long time and while he is booting.
Butt notting more than te boot screen shows.
The only way to start the phone again is to remove the battery.
I can get in the "red-green-blue-white screen"
I already tryed to reinstall the magldr. But no luck.
And what do you meen with "in not boot"?
The only thing it does do is boot to this logo and that's it. So its always booting when i turn it on...

"if not boot to magldr"
which HSPL you have installed on device?
try install WM6.5 first then install magldr....
first time when phone boot after magldr flashed, must boot to magldr automatically

I have HSPL2.08
It doesn't start the magldr automatically.
Even if i hold the power button. It just starting with a white boot screen with HTC logo.
Don't know how to install wm6.5 again.
Please help. I would like to use my phone tomorow again.
Edit:
Maybe it's bricked...

boot to threecolor screen and flash WM6.5

Ok I flash back to WM6.5
What to do now?
Follow the instructions again i asume.
Anyway many thanks for your help!!!

yes, after flash, install magldr and continue...

Ok I flashed my phone back to WM6.5
This is working again.
After that I installed the magldr but it doesn't load anything after that.
It says the flash went correct but when the phone reboots it goes to the white htc boot logo. And thats it.
Even if i start the phone with the power button on it doesn't go to the magldr.
Did i install the right one?
I installed the MAGLDR113_DAF
After that i tryed to flash the rom to WP7.5 but is says that the phone is not connected.
Don't know what to do anymore.

you cant flash WP7 without magldr menu (setting options and enable USB flasher in magldr)...
yes this magldr is ok...
http://forum.xda-developers.com/showthread.php?t=893618
to be sure, which version of HD2 you have?
also check data in bootloader screen (threecolor)

Data in bootloader screen:
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
0x05
CotullaHSPL 0x50
Version:
I know i don't have the t-mobile version.
HTC HD2 T8585

MasterMaarten said:
Ok I flashed my phone back to WM6.5
This is working again.
After that I installed the magldr but it doesn't load anything after that.
It says the flash went correct but when the phone reboots it goes to the white htc boot logo. And thats it.
Even if i start the phone with the power button on it doesn't go to the magldr.
Did i install the right one?
I installed the MAGLDR113_DAF
After that i tryed to flash the rom to WP7.5 but is says that the phone is not connected.
Don't know what to do anymore.
Click to expand...
Click to collapse
did you perform the magdlr prep steps of clearing the mbr and uselast24nand from the services option of the main menu, then select option 5 (main menu) usb flash...then flash rom?

hjhjhj said:
did you perform the magdlr prep steps of clearing the mbr and uselast24nand from the services option of the main menu, then select option 5 (main menu) usb flash...then flash rom?
Click to expand...
Click to collapse
I used the manual from dxdy:
STEP 0.5 - from same beginning, WP7 never or not installed on phone
- If needed (if Android NAND installed, or if any error during flash
process, erase NAND with Task29). Flashing WM6.5 not needed.
- if you have SIM locked phone and want unlock with code, you can this only in WM6.5
- insert formatted microSD card to FAT32 in phone
- flash radio if you want (if flash version available) or use radio upgrade during ROM flashing (put radio file
part00.bin in data.zip file before ROM flash)
STEP 1. - when HSPL and/or MAGLDR not installed
- Flash HSPL 2.08 if needed (put device in bootloader before Flash:
press and hold Volume down + Power button)
- Flash MAGLDR 1.13 (put device in bootloader before Flash:
press and hold Volume down + Power button)
Click to expand...
Click to collapse
- I didn't erease the NAND with Task29 because i don't have android installed.
But after the last step it wont go in to the MAGLDR.
- I didn't Flash the Radio. Is this needed?
Where can i find the radio version that is installed? Or does it need to be a tweakt version from this forum?

MasterMaarten said:
I used the manual from dxdy:
- I didn't erease the NAND with Task29 because i don't have android installed.
But after the last step it wont go in to the MAGLDR.
- I didn't Flash the Radio. Is this needed?
Where can i find the radio version that is installed? Or does it need to be a tweakt version from this forum?
Click to expand...
Click to collapse
you should do task29 whether you have android or not....between flashes even if wp7. task29 cleans out the memory area where the OS will reside.
as for the radio...radio thread for the TMOUS radio is here:
http://forum.xda-developers.com/showthread.php?t=1111613
more than likely you shouldn't have to flash a radio, but it won't hurt. only have to do it once.
in order to use the rom flash utility...you have to go into magdlr main screen...scroll down to and select 10. Services, then select 5. CleanMBR, and then 4. Uselast24NAND. Finally, back at the main set of options select 5. USB Flash.
Then you kick off your DWI.exe in admin mode.

HD2 bricked!! Need urgent help from anyone!!!

Hello together,
I had since thursday last week a HD2 NAND flashed to Android IceCreamSandwich,
but after a reboot i dont know why i got a white screen on startup und nuttin happens. So i tried several Troubleshoots to flash again but nuttin happens!!!!
I have the normal HD2 not the TMobile one and got HSPL 2.08SPL on
my Troubleshoots:
Task 29 - Fail because corrupt Image!
HSPL2 - Try to flash to SPL or HSPL no delete/change!
HSPL3 - Try to flash to SPL or HSPL no delete/change!
HSPL4 - Try to flash to SPL or HSPL no delete/change!
Stock Rom - cant find any Official Rom for my Serial: HT031NW03079, and downloaded GERMAN one v.1.66, TURKISH one v1.66 & v.3.14, WWE one v1.66 & v.3.14, WWE ASIA onev1.66, but every try with USB Cable fail with 1% or Image Corrupt Errormessage or hang up on 0%. Tries over SD Card fail every time with
Errormessage 18003 radio v2-fail.
Please Help me!!!

back to winmo use sd card method..

If you can enter in bootloader (with color band) VOL.DOWN + POWER
plub usb to pc and flash a stok rom

I tried this with several Official Roms but no one function..
still hang on 0 % or get a Errormessage on 1% that Image is corrupt over USB
and over SD every try hang with "Errormessage 18003 and Radio_V2 - Fail
LEOIMG.nbh - FAIL
Update Terminate
UPDATE FAIL

You didn't brick it man. Just flash CLK or MAGLDR.

I tried DFT_LEO_MAGLDR113_DAF and it gone 100% but after it I got the Error [270] File is Corrupt over USB.
Try to install MAGLDR over HD2 Toolkit, but hang on 0 %
Try to install CLW over HD2 Toolkit, it gone 100% but after it I got the Error [270] File is Corrupt
Try to install MAGLDR over SD with renameing magdlr.nbh to leoimg.nbh
Update Success but still white screen.. try to open phone with holding power key to enter magdlr menu no sucess - still white screen

You didn't brick you phone. The only serious brick is when you turn on the phone and it vibrates about three of four times. If that's not the problem, i'm sure that you just did someting wrong.
What i suggest is to read the steps in the link very well:
http://forum.xda-developers.com/showthread.php?t=893948
Be aware of the following things;
1. Flash hspl 2, when u use vista: richt click on 'Run as administrator'!! and continue to the screen (make sure phone is connected with a good cable)
2. Flash radio, also run as administrator
3. Make sure you use task 29, Hold volume down and press power button. Wait till you see USB. Then you can flash task 29
4. Use MAGLDR, use volume down and press power button. Flash it (don't forget run as administrator or else you get an error!!
5. Flash CWM via usb flasher (Use the right partition size)
6. Clean SD card with panasonic sd-formatter.
7. Put rom on sdcard and install rom via CWM.
Goodluck!
Greetings,
Arjan

First things first- wrong forum. You have higher chances of getting help in the Q&A section.
Coming to your issue, check if you have a proper USB cable. Most of your error seems to be related to corrupt images, USB cable could be the culprit.
Next, use a different port and reinstall WMDC/ ADB drivers (install them first)
Finally, redownload task29, magldr or cLK images just in case. Use a SD Card that is less than 8GB in size, formatting it in windows with default cluster size.
As long as you are able to get your phone to boot to the tricolour screen, you have not bricked it.
Swyped from my HTC HD2 (ICS 4.0.4)

NLsalvador said:
You didn't brick you phone. The only serious brick is when you turn on the phone and it vibrates about three of four times. If that's not the problem, i'm sure that you just did someting wrong.
What i suggest is to read the steps in the link very well:
http://forum.xda-developers.com/showthread.php?t=893948
Be aware of the following things;
1. Flash hspl 2, when u use vista: richt click on 'Run as administrator'!! and continue to the screen (make sure phone is connected with a good cable)
2. Flash radio, also run as administrator
3. Make sure you use task 29, Hold volume down and press power button. Wait till you see USB. Then you can flash task 29
4. Use MAGLDR, use volume down and press power button. Flash it (don't forget run as administrator or else you get an error!!
5. Flash CWM via usb flasher (Use the right partition size)
6. Clean SD card with panasonic sd-formatter.
7. Put rom on sdcard and install rom via CWM.
Goodluck!
Greetings,
Arjan
Click to expand...
Click to collapse
1. I have a Win7 / 64 Bit Notebook and started everything also with "Run as Adminstrator" but if i try to change the HSPL to 2.08.000 the Program says "It´s done" But on the phone still SPL-2.08.HSPL appears CotullaHSPL!
2. Which Radio i need? I tried to install Radio_Leo_2.15.50.14 but still hang on 0%
3. Task29 hang on 0% or get 100% with Errormessage that Image is corrupt.
4. No way to install MAGDLR, eather it hang on 0% or on 1% with Errormessage Image is Corrupt, try to install MAGDLR over SD and Update success, but can not enter MAGDLR menu by holding Power Key. White Screen Appears nothing else.
5. no way without MAGDLR
6. no way without MAGDLR

m4gnum87 said:
1. I have a Win7 / 64 Bit Notebook and started everything also with "Run as Adminstrator" but if i try to change the HSPL to 2.08.000 the Program says "It´s done" But on the phone still SPL-2.08.HSPL appears CotullaHSPL!
2. Which Radio i need? I tried to install Radio_Leo_2.15.50.14 but still hang on 0%
3. Task29 hang on 0% or get 100% with Errormessage that Image is corrupt.
4. No way to install MAGDLR, eather it hang on 0% or on 1% with Errormessage Image is Corrupt, try to install MAGDLR over SD and Update success, but can not enter MAGDLR menu by holding Power Key. White Screen Appears nothing else.
5. no way without MAGDLR
6. no way without MAGDLR
Click to expand...
Click to collapse
trying it on other computer with a good cable.maybe it's your laptop has something wrong.

try the goldcard method (you cannot generate it for free anymore, but you can google for a good one searching the CID for your sd, try several sd until you will find an sd with a know CID and a goldcard image ready to download for your CID) [try with sandisk/kingstone 2gb, goldcard is not supported with SDHC like 16gb one], and flash from sd in bootloader the nbh image extracted from wwe RUU (you will find *.nbh image under temp folders when you run *RUU*.exe)
maybe with goldcard you can force radio flashing
also try mtty and some tasks (like 2a if i remember well) that try to repair your bad blocks
if you can't solve with these 2 method, sell it on ebay and buy a new one for the same price

The official roms can be extracted with winrar, extract it and copy RUU_signed.nbh to the root of your sd card. Insert the sd and boot it holding volume down and when entered bootloader press volume up. Now it should put it back to WinMo. Then Flash HSPL and Magldr.

m4gnum87 said:
Hello together,
I had since thursday last week a HD2 NAND flashed to Android IceCreamSandwich,
but after a reboot i dont know why i got a white screen on startup und nuttin happens. So i tried several Troubleshoots to flash again but nuttin happens!!!!
I have the normal HD2 not the TMobile one and got HSPL 2.08SPL on
my Troubleshoots:
Task 29 - Fail because corrupt Image!
HSPL2 - Try to flash to SPL or HSPL no delete/change!
HSPL3 - Try to flash to SPL or HSPL no delete/change!
HSPL4 - Try to flash to SPL or HSPL no delete/change!
Stock Rom - cant find any Official Rom for my Serial: HT031NW03079, and downloaded GERMAN one v.1.66, TURKISH one v1.66 & v.3.14, WWE one v1.66 & v.3.14, WWE ASIA onev1.66, but every try with USB Cable fail with 1% or Image Corrupt Errormessage or hang up on 0%. Tries over SD Card fail every time with
Errormessage 18003 radio v2-fail.
Please Help me!!!
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=668347

ph03n!x said:
First things first- wrong forum. You have higher chances of getting help in the Q&A section.
Coming to your issue, check if you have a proper USB cable. Most of your error seems to be related to corrupt images, USB cable could be the culprit.
Next, use a different port and reinstall WMDC/ ADB drivers (install them first)
Finally, redownload task29, magldr or cLK images just in case. Use a SD Card that is less than 8GB in size, formatting it in windows with default cluster size.
As long as you are able to get your phone to boot to the tricolour screen, you have not bricked it.
Swyped from my HTC HD2 (ICS 4.0.4)
Click to expand...
Click to collapse
i tried as you told with reinstalling the drivers for WMDC and redownloading all other things but still the same s... I think the problem is the 2.08.SPL i cant change it or delete it.. or maybe a cache of anything is bricked so he hang on 0% or 1 %... i dont know im so frusted

look at my post, try goldcard method, should force flash process

pirlano said:
look at my post, try goldcard method, should force flash process
Click to expand...
Click to collapse
how i can go over the gold card method if my hd2 is not running? i see in the tutorial that i must get to storage mode and get the SD Cards Serial number..???

jak11 said:
Try this http://forum.xda-developers.com/showthread.php?t=668347
Click to expand...
Click to collapse
The Rom is still no more avaiable to download and if start mtty i have no selection for USB :S

still not solved, i can guide you through skype it will be easier

Task29 ve HSPL 3 araçlarını tekrar indir. Belki sorun onlardadır.
Download Task29 and HSPL 3 again, the problem may belong them.

nphaibk said:
still not solved, i can guide you through skype it will be easier
Click to expand...
Click to collapse
for sure i will be avaible in 3 hours if you want?