well i was trying to load yoshi ginger on my mytouch 3g 1.2 and i flashed the kernel it said i needed . but when the rom loaded up for the first time, it wouldn't detect my wifi so i could go thru google setup. and I don't have a data plan. so i tried to take yoshi off and try cyanogen 6.1 rc 1, and now my phone gets stuck on the cyanogen screen. tried wiping and reflashing and re wiping and i dunno. and the worst part is it completely wiped everything off my SIM card. my sim wont even work in any other phone now i dunno wtf happened. any ideas? can anyone please help me out. stuck in a real ****ty spot right now and any help is greatly appreciated! thanks!
can anyone point me in the direction of how to get my kernel back to the original?
Wipe boot and your kernel will be gone... you said you wiped and flashed a new rom so your kernel was replaced wit the cm one. Maybe you should try cm6.1 stable
i'm using the clockwork recovery and I've tried data wipe, dashkiv wipe, and then install cm 6.1 stable and it kept getting stuck at the cyanogen boot screen. now the phone is getting stuck at a black screen after the green mytouch screen, or its powering off, not sure which. any ideas about why my sim was destroyed? all numbers on it have been erased and i put it in another fone and it wont even let me make a call. and it's a gophone sim card, i don't have a contract, so i dont think i can take it to at&t to get them to replace it.
bob461357 said:
i'm using the clockwork recovery and I've tried data wipe, dashkiv wipe, and then install cm 6.1 stable and it kept getting stuck at the cyanogen boot screen. now the phone is getting stuck at a black screen after the green mytouch screen, or its powering off, not sure which. any ideas about why my sim was destroyed? all numbers on it have been erased and i put it in another fone and it wont even let me make a call. and it's a gophone sim card, i don't have a contract, so i dont think i can take it to at&t to get them to replace it.
Click to expand...
Click to collapse
Never heard of anyone killing a sim... nothing related to rom flashing touches it. You'll probably need to get it replaced somehow.
Also can you get any other roms to boot?
well, in clockwork i did wipe data/factory reset, wipe cache, and wipe delvkim cache, and loaded cyanogen 5.0.8 DS , and it loaded up good. but it's the ROM i was originally using before I tried to put yoshi and cyanogen 6.01 RC and stable. none of them would ever work right, they would freeze up somewhere. i got yoshi loaded but when it did the google setup at the first boot up, it wouldn't let me use wi-fi to register and I don't have a data plan. cyanogen 5.08 lets me use my wifi so i was able to recover and re-sync the phone with google and i put the sim card back in the phone after that, and rebooted it, and it works perfect now. it's also exactly how it was before I tried to put a new rom on it find out which one I want to use. but being as this is the only ROM i can get to work properly i guess i'll just be sticking with it.
Related
I rooted my phone without any problems then installed another recovery image without an issue. I flashed my phone with new rom image and that also worked fine then I tried to another rom that seem to go well but now my phone is just siting at mytouch initial screen. I can go back into recovery but after flashing rom it still only sits on mytouch screen. How I can fix my phone?
Do you do a wipe before you install the new rom? That might fix the issue.
how do you wipe phone I'm having same problem. phone wont boot into recovery I can go into bootloader
hey everyone got a problem with my mytouch3g
I already had the Cyanogenmod 4.2.15.1 working perfectly fine
then I installed the RC30 mod v1.2
restarted phone and it becomes stuck on splash screen (I have waited 30 min to declare it was stuck)
Restarted again and again still stuck.
I tryed reinstalling CyanogenMod didnt do anything same problem
I wiped my data.
I formatted my microSD(FAT32) its a sandisk but it worked perfect before so im sure its not an SD problem
Now im trying to revert my phone back to cupcake using SAPPIMG.nbh
it loads up reads the image go through and gets stuck updating RADIO_V2 the red progress bar on top is like 99%
any ideas on how to get my phone working again?
i got it now, i installed a different rom then back to my rom
Hey everyone.
I would appreciate some help or suggestions. Maybe someone will know the problem, which I can't seem to figure out. First thing first, I couldn't post in the release thread because I don't have the proper post count.
Anyways, I am not new to installing ROMs on my phone. I can install and run CyanogenMOD easily, and have done so many times. My phone is rooted. So I went from the stock ROM on the MyTouch 4G to CyanogenMOD 7, with no problems. I used it for a while, and then when I saw Virtuous Fusion come out, I wanted that installed. I had tons of trouble getting it to work, even though I was doing everything I was supposed to do. Reset my phone, cleared all caches and data, pretty much cleared everything out. I tried installing from the zip several times in clockwork recovery, and it wouldn't get me past the boot screen. The boot screen would either loop forever, and never get past it, or the boot screen would load up for 3 seconds and then the screen would go completely black (in a state where it looked like the phone turned off).
Eventually, after about the 10th install (which were done all the same exact way), the Fusion ROM decided to work on me and everything went perfectly. This was the first day it was released. I saw the ROM has been through some updates, so I decided to do the recommended clean install of the new version. I am having the same problem as I did before with the boot screen. I temporarily flashed Cyanogenmod so I can have a working phone again, but I would really like to be on Fusion. My favorite ROM out of all the ones I have tried. Does anyone know what could be causing this?
What version of ClockworkMod are you using? Make sure you're on 3.0.2.4 to insure ultimate reliability. Also verify the MD5 hash that eViL provides before flashing. Not doing so means you could have any number of problems caused by a corrupt file download.
Are you rebooting into ROM MANAGER. This ROM is not suppose to be loaded while in the Android OS.
So.... I was stuck at the M logo after trying to update to a newer version of MIUI. I successfully SBF'd back to stock froyo and my phone won't activate. When the activation call tells me to press "1", it simply goes silent.
Now I somehow bypassed the activation screen, I don't think that was a good idea because it forced me to connect via wifi. I just said "screw it anyway" and went ahain to reroot. Then I installed CM7 (since I current don't have the MIUI zip I was previously running on my phone). Now I am stuck at the CM7 logo. Not sure if I should SBF again or what I should do. I'm kinda freaked.
Also, I have never had a problem SBFing before. This seems more serious than before.
Update: Wiping data allowed me to boot up in CM7. Still cannot activate my phone. Whenever it prompts me to press "1", all I get is complete silence.
I'm currently at UT Dallas, so I don't think location is a problem is it? Actually it shouldn't be because I bricked my phone here before. Had to reactivate it and it worked great.
Man, this is the first time my phone won't activate.
Yes I know I am posting a lot, but since no one is here to help currently I'm trying things out on my own.
I tried restoring a nandroid I had of CM7 previously. Man I thought this was always a failsafe....
Just thinking of things I did since the last time I activated my phone. I updated something (radio version, I don't really know much about it), it was supposed to make my 3G faster or whatever. But I mean I've SBF'd, factory reset and everything, so that shouldn't be an issue?
Gosh dang, I just want my phone back the way it was 2 hours ago.
One of the reasons nandroid might not be working is that I might have a different version of clockwork on my phone. I remember before having a version where the test was blue, but I forgot the version number. Now the one I get with rom manager is green (like the one I had before I got the blue one).
Man I am sooo confused here. I am completely at a loss. I am out of ideas. I need help.
So I realized I did not have the second init version of clockwork. I just flashed that, and I'm waiting to see if I will get any errors. If I get this to work I am going to flash the version of MIUI I had and try to restore my more recent nandroid (since Ive gotten MIUI).
Yup problem solved. Not sure what was causing the problem, but at least its solved. I'm gonna be extra careful next time I flash something.
Hello,
I've got a problem with my gt-i9505.
I've managed to root the phone and install TWRP.
So i decided to install CM10.2 (21-08) and the right gapps for it.
Everything worked very good and I couldn't be happier.
All my apps were back and it was ready to use it!
I turned off the phone and went to sleep.
The next day i turned it on and it got stuck on the bootscreen (not the CM bootscreen, but the SAMSUNG GALAXY S4 bootscreen).
So I tried to do factory reset and install rom again, gapps again, afterwards again wipe dalvik and cache.
But i keep having the same problem. Right now after flashing the rom it doesn't even boot up the first time.
I also tried going back to 10.1, but same problem.
I don't know what to do, i just got my s4. Really hope i can fix it.
Luckily i can enter the recovery. But i didn't do a backup or anything.
Does anyone have any tips on how to get it working again?
ricomana said:
Hello,
I've got a problem with my gt-i9505.
I've managed to root the phone and install TWRP.
So i decided to install CM10.2 (21-08) and the right gapps for it.
Everything worked very good and I couldn't be happier.
All my apps were back and it was ready to use it!
I turned off the phone and went to sleep.
The next day i turned it on and it got stuck on the bootscreen (not the CM bootscreen, but the SAMSUNG GALAXY S4 bootscreen).
So I tried to do factory reset and install rom again, gapps again, afterwards again wipe dalvik and cache.
But i keep having the same problem. Right now after flashing the rom it doesn't even boot up the first time.
I also tried going back to 10.1, but same problem.
I don't know what to do, i just got my s4. Really hope i can fix it.
Luckily i can enter the recovery. But i didn't do a backup or anything.
Does anyone have any tips on how to get it working again?
Click to expand...
Click to collapse
Hi,
Look HERE
Put everything back to stock then, try again.
I found some 10.2 ROMS do not like rebooting,and just hang.
Remove the battery and try again normally worked.
malybru said:
Hi,
Look HERE
Put everything back to stock then, try again.
I found some 10.2 ROMS do not like rebooting,and just hang.
Remove the battery and try again normally worked.
Click to expand...
Click to collapse
Thanks for replying
I followed the instructions and succesfully installed the official stock rom for my device and region.
But it's still stuck at the samsung boot screen.
And now i can't boot into TWRP anymore either, is that correct?
After that I flashed with the .pit file. But still stuck on bootscreen.
Is there any other way to solve this problem?
idgaf about custom roms or CM10.2 anymore, i just want my phone to work.
Wether it's with custom or with stock firmware.
Really hope I didn't break my phone. :crying:
EDIT:
I wiped cache after flashing, but no data wipe/factory reset. That did the trick.
God i can't be happier my phone finally works again. Now i'm scared to flash a custom rom again. I think i need to install TWRP or CWM again too I'll just wait for now.