hey everyone got a problem with my mytouch3g
I already had the Cyanogenmod 4.2.15.1 working perfectly fine
then I installed the RC30 mod v1.2
restarted phone and it becomes stuck on splash screen (I have waited 30 min to declare it was stuck)
Restarted again and again still stuck.
I tryed reinstalling CyanogenMod didnt do anything same problem
I wiped my data.
I formatted my microSD(FAT32) its a sandisk but it worked perfect before so im sure its not an SD problem
Now im trying to revert my phone back to cupcake using SAPPIMG.nbh
it loads up reads the image go through and gets stuck updating RADIO_V2 the red progress bar on top is like 99%
any ideas on how to get my phone working again?
i got it now, i installed a different rom then back to my rom
Related
Hello Xda!
I recently used this forum to install Android on my HTC HD2 UK Vodafone.
It all went pretty smoothly after i realised you needed to update the radio to get it working properly. It's worked pretty fine for nearly a week till this morning, i was updating apps then all of a sudden my phone restarted, so i tried to boot back into android and its basically been doing the same all day. It will either boot up into the loading screen and keeps repeating that with a green screen for a quick second between each loading screen and then ends up with a white screen.
I have tried pretty much everything i can think of, only thing i havn't tried is changing the android build as i did like the one i was using. I have formatted the SD card, re-downloaded the android build, changed zImages etc etc but still no luck.
Any help would be greatly appreciated!
dan1j3l-LeoFroyo-1.0
Radio_2.10.50.08_2
Cotulla_zImage_VOLUME_SR_AUD (3/8)
Not sure what other info you need
Thanks
Richy
please try to delete AndroidApp folder on your drive Storge.
try this
( http://forum.xda-developers.com/showthread.php?t=749766 )
well i was trying to load yoshi ginger on my mytouch 3g 1.2 and i flashed the kernel it said i needed . but when the rom loaded up for the first time, it wouldn't detect my wifi so i could go thru google setup. and I don't have a data plan. so i tried to take yoshi off and try cyanogen 6.1 rc 1, and now my phone gets stuck on the cyanogen screen. tried wiping and reflashing and re wiping and i dunno. and the worst part is it completely wiped everything off my SIM card. my sim wont even work in any other phone now i dunno wtf happened. any ideas? can anyone please help me out. stuck in a real ****ty spot right now and any help is greatly appreciated! thanks!
can anyone point me in the direction of how to get my kernel back to the original?
Wipe boot and your kernel will be gone... you said you wiped and flashed a new rom so your kernel was replaced wit the cm one. Maybe you should try cm6.1 stable
i'm using the clockwork recovery and I've tried data wipe, dashkiv wipe, and then install cm 6.1 stable and it kept getting stuck at the cyanogen boot screen. now the phone is getting stuck at a black screen after the green mytouch screen, or its powering off, not sure which. any ideas about why my sim was destroyed? all numbers on it have been erased and i put it in another fone and it wont even let me make a call. and it's a gophone sim card, i don't have a contract, so i dont think i can take it to at&t to get them to replace it.
bob461357 said:
i'm using the clockwork recovery and I've tried data wipe, dashkiv wipe, and then install cm 6.1 stable and it kept getting stuck at the cyanogen boot screen. now the phone is getting stuck at a black screen after the green mytouch screen, or its powering off, not sure which. any ideas about why my sim was destroyed? all numbers on it have been erased and i put it in another fone and it wont even let me make a call. and it's a gophone sim card, i don't have a contract, so i dont think i can take it to at&t to get them to replace it.
Click to expand...
Click to collapse
Never heard of anyone killing a sim... nothing related to rom flashing touches it. You'll probably need to get it replaced somehow.
Also can you get any other roms to boot?
well, in clockwork i did wipe data/factory reset, wipe cache, and wipe delvkim cache, and loaded cyanogen 5.0.8 DS , and it loaded up good. but it's the ROM i was originally using before I tried to put yoshi and cyanogen 6.01 RC and stable. none of them would ever work right, they would freeze up somewhere. i got yoshi loaded but when it did the google setup at the first boot up, it wouldn't let me use wi-fi to register and I don't have a data plan. cyanogen 5.08 lets me use my wifi so i was able to recover and re-sync the phone with google and i put the sim card back in the phone after that, and rebooted it, and it works perfect now. it's also exactly how it was before I tried to put a new rom on it find out which one I want to use. but being as this is the only ROM i can get to work properly i guess i'll just be sticking with it.
Hi all,
I'm having a little problem. I have researched but everything I've found leads me back to square one...
So I followed this guide to installing CM7 on my M2. Please note that I have in the past successfully rooted my phone, installed the Argenstone ROM and one other basic Great Britain Rom. So I'm not a total nub. However at this stage I have a phone that's is useless to me...
My phone is rooted. I have Droid2Bootstapper installed and I managed to get the CWM 3.X installed. I downloaded the all-in-one.zip file from the CM7 ROM thread (the zip is actually called EndlessCM7-110901-nightly_build.zip - hope that's not an issue?)
I booted into CWM and applied the EndlessCM7-110901-nightly_build.zip and after (without a reboot) wiped everything (I had backed it up previously).
I rebooted the phone and...well I get the Google logo with the Motorola M and the Cyanogen bot as the 2 'O' characters. Then after a while a 3D rotating 'square' and the android writing and logo 'shimmering' in and out but that just goes on forever. I left it for an hour at one point and just gave up.
Now I can't even get past the Google logo. I've tried restoring my previous back up but that won't work either. I can't boot into the OS to actually use RSD lite to flash a known working ROM over the top.
When the LED turns blue and I hit the volume key it displays "Android BootMenu <v1.0.3>" which is different to the CWM 3.X that I was getting prior to applying the EndlessCM7-110901-nightly_build.zip file.
From here I can select to recover the last 'latest recovery' which when done loads into CWM-based Recovery v4.0.1.6-defy.
Basically I'm at this point where I seem to be able to load just about every boot menu under the sun and do everything but actually launch the damn OS.
How can I get out of this hole? Preferably I'd like to get everything back to the stock ROM the phone came with so that I can start from scratch again.
Any bodies help would be more than appreciated.
Cheers,
- Matt
EDIT: I have even used CWM 4.X+ to try and restore the Argenstone ROM. it goes through the whole process of checking the MD5 sums, restoring the system and boot images etc and seems to work without any issues. I then wipe all data and reboot. Nothing - still the same cyanogen Google logo and the only thing I can do is boot into all the CWM menus.
*sigh*
Argh feel like a true idiot now. It took me about an hour of searching earlier but I've only just found/remembered how to get RSD lite to see my phone (pwr+volume+camera) and I'm wiping the whole thing to the factory (vodafone) ROM. Might take the opportunity to take it to Vodafone and tell them it never gets a damn 3G connection lol...provided this flash works (touch wood).
Hi, I was running Android on my HD2 for almost 9 months, currently HyperDroid5.5.2. Till now, without any problem whatsoever. Suddenly, when I checked my phone this morning it didn't respond. So I waited a while, then tried pulling the battery. Booting got stuck at Android logo. No problem I thought, I periodically do nandroid backups just in case. Tried to restore it - stuck at restoring data. Then I tried advanced restore, only boot and system... either of them didn't work. After this, I decided to reinstall from scratch - task29, radio, magldr, cwm. The ROM installation got stuck again. So I tried flashing stock SPL and stock ROM from HTC site. SPL okay, ROM not. Got error 262 from the RUU. Tried searching the forum but there is so much stuff that it's impossible to get through. So please don't bash me from beeing a noob. Can anyone please help?
Edit: After the phone finally accepted WM back, I want to put Android back on it... ROM installation gets stuck at restoring Batterystats.bin... any ideas?
T mobile wont take it because there is a scratch on my phone on the screen.So the problem that i am having is that my touch 4g received an update a couple days ago. while i was doing the update my phone froze on me. T when it came back on the phone would freeze at the 4g screen. I tried using the boot loader and putting the original pd15img on to the sd card, not in any folders and every time i try to boot it. it keeps saying that it has no image or wrong image. is there away to wipe an un rooted phone and install everything from scratch, or is there any way i can get my phone to work. Any help would be appreciated Ive checked alot of forums and cant find the help i need