I rooted my phone without any problems then installed another recovery image without an issue. I flashed my phone with new rom image and that also worked fine then I tried to another rom that seem to go well but now my phone is just siting at mytouch initial screen. I can go back into recovery but after flashing rom it still only sits on mytouch screen. How I can fix my phone?
Do you do a wipe before you install the new rom? That might fix the issue.
how do you wipe phone I'm having same problem. phone wont boot into recovery I can go into bootloader
Related
well i was trying to load yoshi ginger on my mytouch 3g 1.2 and i flashed the kernel it said i needed . but when the rom loaded up for the first time, it wouldn't detect my wifi so i could go thru google setup. and I don't have a data plan. so i tried to take yoshi off and try cyanogen 6.1 rc 1, and now my phone gets stuck on the cyanogen screen. tried wiping and reflashing and re wiping and i dunno. and the worst part is it completely wiped everything off my SIM card. my sim wont even work in any other phone now i dunno wtf happened. any ideas? can anyone please help me out. stuck in a real ****ty spot right now and any help is greatly appreciated! thanks!
can anyone point me in the direction of how to get my kernel back to the original?
Wipe boot and your kernel will be gone... you said you wiped and flashed a new rom so your kernel was replaced wit the cm one. Maybe you should try cm6.1 stable
i'm using the clockwork recovery and I've tried data wipe, dashkiv wipe, and then install cm 6.1 stable and it kept getting stuck at the cyanogen boot screen. now the phone is getting stuck at a black screen after the green mytouch screen, or its powering off, not sure which. any ideas about why my sim was destroyed? all numbers on it have been erased and i put it in another fone and it wont even let me make a call. and it's a gophone sim card, i don't have a contract, so i dont think i can take it to at&t to get them to replace it.
bob461357 said:
i'm using the clockwork recovery and I've tried data wipe, dashkiv wipe, and then install cm 6.1 stable and it kept getting stuck at the cyanogen boot screen. now the phone is getting stuck at a black screen after the green mytouch screen, or its powering off, not sure which. any ideas about why my sim was destroyed? all numbers on it have been erased and i put it in another fone and it wont even let me make a call. and it's a gophone sim card, i don't have a contract, so i dont think i can take it to at&t to get them to replace it.
Click to expand...
Click to collapse
Never heard of anyone killing a sim... nothing related to rom flashing touches it. You'll probably need to get it replaced somehow.
Also can you get any other roms to boot?
well, in clockwork i did wipe data/factory reset, wipe cache, and wipe delvkim cache, and loaded cyanogen 5.0.8 DS , and it loaded up good. but it's the ROM i was originally using before I tried to put yoshi and cyanogen 6.01 RC and stable. none of them would ever work right, they would freeze up somewhere. i got yoshi loaded but when it did the google setup at the first boot up, it wouldn't let me use wi-fi to register and I don't have a data plan. cyanogen 5.08 lets me use my wifi so i was able to recover and re-sync the phone with google and i put the sim card back in the phone after that, and rebooted it, and it works perfect now. it's also exactly how it was before I tried to put a new rom on it find out which one I want to use. but being as this is the only ROM i can get to work properly i guess i'll just be sticking with it.
I found a solution.
Setup: I have the Evo 4G, running the latest rooted 4.56 sprint update. I used the "infected" rom version. My phone was working great for about 3 weeks. No problems. Then yesterday, I pulled my phone out to use it and it was just stuck at the white HTC EVO 4G boot up splash screen. I pulled the battery out and the same thing happened. Here is what I did. Note that the LAST step actually fixed it, but I'm just documenting what I did. Also - I DID NOT LOSE ANY DATA! All my phone settings were left intact and didn't have to re-download anything.
1.) did a Nandroid backup though the recovery - just to be safe
2.) Rebooted to recovery and re installed the "infected" rom. rebooted and nothing changed. It was still stuck at the splash screen
3.) booted into recovery - Did a Dalvik wipe. rebooted
This fixed it! Not sure exactly what was wrong or how this fixed it, but I hope it helps someone else! The best part about this is that I did't lose any data at all.
Best of luck!
Buzz
Hello,
I've got a problem with my gt-i9505.
I've managed to root the phone and install TWRP.
So i decided to install CM10.2 (21-08) and the right gapps for it.
Everything worked very good and I couldn't be happier.
All my apps were back and it was ready to use it!
I turned off the phone and went to sleep.
The next day i turned it on and it got stuck on the bootscreen (not the CM bootscreen, but the SAMSUNG GALAXY S4 bootscreen).
So I tried to do factory reset and install rom again, gapps again, afterwards again wipe dalvik and cache.
But i keep having the same problem. Right now after flashing the rom it doesn't even boot up the first time.
I also tried going back to 10.1, but same problem.
I don't know what to do, i just got my s4. Really hope i can fix it.
Luckily i can enter the recovery. But i didn't do a backup or anything.
Does anyone have any tips on how to get it working again?
ricomana said:
Hello,
I've got a problem with my gt-i9505.
I've managed to root the phone and install TWRP.
So i decided to install CM10.2 (21-08) and the right gapps for it.
Everything worked very good and I couldn't be happier.
All my apps were back and it was ready to use it!
I turned off the phone and went to sleep.
The next day i turned it on and it got stuck on the bootscreen (not the CM bootscreen, but the SAMSUNG GALAXY S4 bootscreen).
So I tried to do factory reset and install rom again, gapps again, afterwards again wipe dalvik and cache.
But i keep having the same problem. Right now after flashing the rom it doesn't even boot up the first time.
I also tried going back to 10.1, but same problem.
I don't know what to do, i just got my s4. Really hope i can fix it.
Luckily i can enter the recovery. But i didn't do a backup or anything.
Does anyone have any tips on how to get it working again?
Click to expand...
Click to collapse
Hi,
Look HERE
Put everything back to stock then, try again.
I found some 10.2 ROMS do not like rebooting,and just hang.
Remove the battery and try again normally worked.
malybru said:
Hi,
Look HERE
Put everything back to stock then, try again.
I found some 10.2 ROMS do not like rebooting,and just hang.
Remove the battery and try again normally worked.
Click to expand...
Click to collapse
Thanks for replying
I followed the instructions and succesfully installed the official stock rom for my device and region.
But it's still stuck at the samsung boot screen.
And now i can't boot into TWRP anymore either, is that correct?
After that I flashed with the .pit file. But still stuck on bootscreen.
Is there any other way to solve this problem?
idgaf about custom roms or CM10.2 anymore, i just want my phone to work.
Wether it's with custom or with stock firmware.
Really hope I didn't break my phone. :crying:
EDIT:
I wiped cache after flashing, but no data wipe/factory reset. That did the trick.
God i can't be happier my phone finally works again. Now i'm scared to flash a custom rom again. I think i need to install TWRP or CWM again too I'll just wait for now.
I just flashed this rom successfully yesterday. The rom was stable and working, however I wanted to get the hotspot to work. I used a hotspot mod on a previous 4.3 rom, so I tried it again on this rom. I flashed the MDC Hotspot Mod while in Philz Touch 5.18 recovery. After flashing the hotspot mod, I reboot the system and it is stuck at the "Kit Kat" splash screen. I went back to recovery, wiped everything (data reset, cache, davlik cache) and reinstalled the rom and it seemed to work fine. However, I wanted to get the hostpot working so later in the night I reinstalled a 4.3 rom, and now I can not get any rom to work. When I boot up I am not faced with the Galaxy S4 screen saying:
KERNEL IS NOT SEANDROID ENFORCING
Set Warranty Bit: kernel
It will not go to the Kit Kat splash screen, I can get to download mode and recovery mode. I tried completely re-rooting the device, Installing different roms and even a different kernel, but I can't seem to get anything to work. At this point, I just need my phone to work and will use any rom. I don't think this is a fully bricked device because I can get into recovery and download mode. I can live without hotspot for now, just need a working phone. If anyone can advise here or help please reply here or email me at [email protected]. This is my daily driver phone and I need it to work, hopefully it is an easy fix like getting a stock 4.4 kernel? BTW this was a brand new galaxy s4 which came with stock 4.4, so I am not sure if installing 4.3 had an issue with it. Maybe using ODIN to fix the problem, I am not sure. I have successfully rooted many phones including HTC EVO 4G, HTC EVO 3D and Galaxy S4( until now) and have never ran into this issue. Please advice anyone!! Thanks!
RE: S4 Sac Rom Issue Please Help
I ran into a similar problem and my device would not boot. I simply just reflashed clockwork 6.0.4 recovery from Odin and was able to get back into recovery to wipe and reflash a new rom. Hope this helps. Note: I selected PDA in Odin. Here is a tutorial to get recovery back.
http://jellybean-news.blogspot.com/2013/02/complete-guide-to-install-clockworkmod.html
Good luck.
As above Gents. I was given it as a broken phone. I had a go at it some time ago. Ive put the Clockwork mod recovery on the memory card (which I can get to) and also have flashed a rom but, whenever it reboots it goes straight back to the stock android recovery screen. Does anyone know a fix for this (if there is one)
I thought id revisit it (with the opening of a thread)!
Cheers to anyone that chips in.
Comfy
Same Problem
Im having the same problem too. After i flashed CWM 6.0.5.0 tortoro, it jsut keeps booting into recovery only. Also tried wiping cache, still fails to boot system. Help