Database Users

USB issue

All of a sudden my pc is not recognizing phone as a usb drive.. It was working perfectly since day one with this phone but since yesterday it wont recognize it.. And even if it does, it takes a very long time. ive treid uninstalling the drivers and reinstalling, as well as turning debugging on and off. My pc is running windows 7 64bit.. I have also tried different roms and nothing.. When connected in debugging mode, it recognizes it immediately and installs drivers by i still cannot view my storage card.. Any help would be appreciatied.. Thanks

Install pdanet on your computer. When it gets to the part about driver installation, select samsung and voila.
Sent from my SPH-D700 using XDA App

Try another USB cable.

rufflez2010 said:
Install pdanet on your computer. When it gets to the part about driver installation, select samsung and voila.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Oops forgot to mention i did that as well.. still not working.. Maybe ill have to buy another usb cable..

jok3sta said:
Oops forgot to mention i did that as well.. still not working.. Maybe ill have to buy another usb cable..
Click to expand...
Click to collapse
:-\ sucks... hey, got to use the emoticons!!!! Ayways, yeah, sounds like the cable is dead. The one from my lg dare doesn= work for data tranfer, so I turned it into my car charger.
Sent from my SPH-D700 using XDA App

Firon said:
Try another USB cable.
Click to expand...
Click to collapse
Seconded. I bought a cheap charging kit and the cable would charge but would not allow file transfer. Took it back, bought another cable and it's fine.
Either the phone is finicky about cables, or it might just require a particular type (probably USB 2.0).

I had this issue also last week. I tried another cable and it worked fine.
But now I am having issues with my usb ports in general. Now they just stop working every once in a while and I am required to restart my laptop.
Don't know if the two problems are related.

Try different USB ports. Like the ones on the back on your computer.

I've been having the same issue. I went out to Radio Shack and bought a new data cable. So far all ports on my laptop, winXP pro 32bit, and my win7 64bit desktop have not had problems.
I'm thinking that the USB cable supplied by Samsung is crap. I tested them both out on the same machine, same port; the new one worked fine, while the stock cable only gave me adb access.

I had this same exact problem. I kept thinking the phone was going bad or something. I tried the cable that came with my Epic & the one that came with my Moment, both didn't work... for some reason it worked find on a Mac though. So when I gave my mom my Moment when I got the Epic she bought an extra micro-USB cable and I decided to try that one, for some odd reason, that one worked.
Still don't know exactly what was going on but a third-party cable fixed the problem for me.
Hope this helps.

Phone is not recognized when in download mode - please help!

After failing again and again and again, reinstalling the drivers, reinstalling KIES (which simply won't work on my machine), removing the battery etc. etc. etc. I just don't know what there is left to do...
When in Win7, the phone is recognized, although Windows tells me that it's not connected to a USB2 hub. In download mode it says connection failed. What else am I supposed to do?
The phone is not branded or anything, applying stuff though update.zip's was never an issue.
So please somebody help me - I'm stuck with JF3

simple, switch to another computer
unless you can find and easy way to make windows forget the USB bugs
you need to also unplug the PC and wait for the PC to power drain, reconnect the PC power cord, and turn the PC back on.
after it goes back to windows try hooking up the phone again, if you get the message about not running in USB2 mode, then it failed
retry after resetting BIOS settings, installing USB2 drivers, etc.
Sent from my GT-I9000M using XDA App

I had a similar problem...
I had a USB 1.1 Port on my Thinkpad T22 and the drivers didnt like it
Use a different computer/USB port
...btw I still like JF3

Now you will probably feel the urge to smack my head against the wall when you read what I'm about to tell you... I don't blame ya... The cause of the "problem" was that I wasn't using the original Samsung USB cable that came with the phone. I just couldn't find it so I decided to use an aftermarket cable which I had lying around. Big mistake... I finally found the USB cord and that fixed everything for me. Beware of aftermarket accessories as the phone will punish you for using them!

that cable might have been a very poor after market version then
i do use a couple of after market USB to micro USB cable with the phone and it works fine
there are bad aftermarket products
and there are quality aftermarket products

I remember having a few mini USB cable with my old G1, and had similar problem. With one cable it was recognising, with the other one didnt.
Don't know what difference they have, but it's indeed wierd!

I was using a nokia usb cable to flash my samsung

[Q] Epic not mounting

I cannot get my epic to mount for ANYTHING! I factory wiped the phone, nope, I used a palm pre usb cable nope, I downloaded the official samsung drivers nope, I plugged the cable into the motherboard on the computer nope, I tried a different computer running windows 7, nope tried a laptop using windows vista, nope. Does anyone know ANY WAY POSSIBLE to get this thing to mount? I selected mass storage and dissabled and enabled usb debugging. Im just not having any luck. It seems that the computer recognizes the phone is connected just cant get to the files on the SD card.

I also spent many hours trying to figure out what the hell was wrong with my Epic, that is, why it would come up as a "malfunction" in Windows when I plugged the USB cable in.
I tried drivers, different restore points, wiping, etc. etc. etc.
To the point... Try a new USB cable. The one packaged with the Epic is junk. As a matter of fact, it worked several times before it crapped out. I have no idea why, but I picked up a new micro USB cable, plugged it in, and the phone was then immediately recognized by my computer to allow mass storage mount.
People who tried the Palm Pre USB cable also had issues for some reason.
IMO, there should be a sticky posted in this board regarding the packaged USB cable, as I encounter this issue quite a bit.

Ok I'll try to find a new one really quick thanks

ugh tried an HTC Mytouch 4g usb cable and that didnt work either. Gonna try a class 4 usb stick and im gonna try puttting all of the files on the computer from the SD card
Edit: Oh wow i cant put the files on the computer duh
Edit: Ok now I'm mad a Class 4 SD card wont connect to the computer thru the epic ughhhh

I'm guessing during this time, you've rebooted the computer a few times? Sometimes, that's all it takes...
Try uninstalling ALL of the USB drivers associated with the Epic, rebooting the computer, then connecting (with debug mode OFF). Windows found and installed the USB drivers for me in just a few seconds when I did this [with the new cable, the first time].
- G

Have u enabled development mode under settings > applications (in your) epic? If not, try that, then plug in cable.
Then pull down the notification bar and it'll give you back the option.. again, if you haven't tried this.

On occasion I have troubles with the Epic mounting/ejecting on a Mac, but the only time I've ever had an issue with it mounting on a PC a different cable solved the problem immediately.

Try a different USB port on your PC. If that doesn't work, try rebooting the PC and the phone.
I had luck with trying different usb ports though

I had this problem as well and:
1. Tried 4 different cables
2. Tried all 4 on all 4 different USB ports
3. Rebooted numerous times
4. Uninstalled/reinstalled drivers
5. Tried 3 different PCs (1 other running 7 and another running Vista)
6. Did 1-4 on all three computers.
OH! and the reason I was so adamant about finding a solution was that I was stuck in Clockwork... due to having messed up an EXT4/RFS/CW2.5/CW3.0 installation... It was MY fault... I screwed up.
The problem was I had been living with the nonmounting problem by simply putting my MicroSD into an adapter and plugging it into my Laptop for file transfers... never expecting to HAVE to ODIN at some time...
Anyway... I ended up coughing up the $100 to Insurance and replacing the phone.
HERE IS MY THEORY: I think what my problem was was that the USB port on the Phone was messed up. I think these USB ports are possibly a hardware fail point and the changing of cables has been a patch on the issue with the port... NOT the cables themselves!
I'm not suggesting that you are there yet since it sounds like you can at least still get the phone to boot up (and aren't stuck in CW) and could still use a work around of putting files on the MicroSD with an adapter...
But I would suggest you don't be as stupid as me and get yourself in a position where ODIN is your only hope.

Yeah, it sounded like a bad USB port to me. Also, FYIY, if you ever have to replace the phone through insurance, tell them that the phone was lost. Either way, it will cost you $100.00 to get a replacement and when it's reported as lost, they will also send you a new battery...

OregonLAN said:
Yeah, it sounded like a bad USB port to me. Also, FYIY, if you ever have to replace the phone through insurance, tell them that the phone was lost. Either way, it will cost you $100.00 to get a replacement and when it's reported as lost, they will also send you a new battery...
Click to expand...
Click to collapse
You don't really think that I sent in a phone that was stuck in CW do you? I don't think that would have worked too well for me.....
Cheers!

Did you end up doing an ODIN restore

Driver Installation Issues

I am trying to install the Samsung Intercept (Virgin Mobile) on my Windows 7 netbook. I could never connect the device before to either WinXP or Win7. I recently factory reset my phone and after installing the drivers on WinXP, the phone showed that it was connected. I mounted the SD card to the computer and it never showed the drive. I unmounted and disconnected and since then it never connected. I keep getting that it's not recognized.
On my Win7 computer, I installed the drivers (had to force Windows to find the driver). Now the computer senses that it's connected, but it says "the device cannot be started". So I'm thinking that my P.O.S. phone can't figure out wtf USB mode is. It showed it once and that's it.
I've tried probably 3 or 4 different drivers and now I can't figure out how to just start clean. I don't even think I need to because the computer driver installed fine (It says Samsung USB Android whatever when it's connected). I tried with USB debugging on and off.

I even tried to make a virtual Windows XP to try it on a fresh install, but VM won't take unknown USB devices.
I uninstalled all my drivers, even the USB hub drivers, rebooted after the uninstall. No luck.
Before I reinstalled the hub I tried to force XP to the drivers (different ones not the same driver over and over) and now its saying "the file does not contain any information about this device". WTF?!
I'm so confused with this stupid driver that I can't take it anymore. I'm now considering reformatting my computer, but it's not worth it just to root a phone. I'd rather put up with my phone needing a battery pull at least once a day than to lose all my files.

caderyn19 said:
I am trying to install the Samsung Intercept (Virgin Mobile) on my Windows 7 netbook. I could never connect the device before to either WinXP or Win7. I recently factory reset my phone and after installing the drivers on WinXP, the phone showed that it was connected. I mounted the SD card to the computer and it never showed the drive. I unmounted and disconnected and since then it never connected. I keep getting that it's not recognized.
On my Win7 computer, I installed the drivers (had to force Windows to find the driver). Now the computer senses that it's connected, but it says "the device cannot be started". So I'm thinking that my P.O.S. phone can't figure out wtf USB mode is. It showed it once and that's it.
I've tried probably 3 or 4 different drivers and now I can't figure out how to just start clean. I don't even think I need to because the computer driver installed fine (It says Samsung USB Android whatever when it's connected). I tried with USB debugging on and off.
Click to expand...
Click to collapse
I had the same issue too.
Have you tried using another USB cable? If you're using the cable that came with the phone it wont work (well sometimes). What you can do is find or buy another Micro USB cable for your intercept. You can buy one off amazon for less than $10. I brought mine from Best buy for $20. It works fantastically.

scream4cheese said:
I had the same issue too.
Have you tried using another USB cable? If you're using the cable that came with the phone it wont work (well sometimes). What you can do is find or buy another Micro USB cable for your intercept. You can buy one off amazon for less than $10. I brought mine from Best buy for $20. It works fantastic.
Click to expand...
Click to collapse
I was seriously considering another cable because I read in some other threads pretty much what you just told me, but I guess I was one of those "on the twelth time it finally connects" type of situations. I connected it last night and it worked. Just need to update my SDK stuff, make sure I have all my info for SuperOneClick, and cross my fingers lol!
Thank you for your advice. If it stops working I'm gettilng a new cable.
[EDIT] and it stopped working... I knew I should've just rooted when I had it connected, but I wanted to back my stuff up. Looks like I'm getting a new cable lol.
Sent from my SPH-M910 using Tapatalk
[EDIT] You were totally right! It's the cable. I got a Belkin for $15 at Target. I plugged it in and immediately Windows 7 Pro 32-bit detected the drivers, the handset, and installed it. Now time for rooting

I know it's been a couple of months, but I'm curious if you've had any other problems with connecting?
I was having the same problem and I had a few cables that I tried with no luck. I also tried my wife's Blackberry cable, which is a thicker cable that claims to be a "DATA" cable...no go.
I probably will just go buy the Belkin one you referred to if you've had no other problems.
Thanks!
-- Sent from my Galaxy Tab using Tapatalk

GreyCelt said:
I know it's been a couple of months, but I'm curious if you've had any other problems with connecting?
I was having the same problem and I had a few cables that I tried with no luck. I also tried my wife's Blackberry cable, which is a thicker cable that claims to be a "DATA" cable...no go.
I probably will just go buy the Belkin one you referred to if you've had no other problems.
Thanks!
-- Sent from my Galaxy Tab using Tapatalk
Click to expand...
Click to collapse
I actually have had no problems (on my Win7 PC) since the install. As for my XP computer, I just gave up on trying to get it to work. Try completely uninstalling every instance of the Samsung programs (I went through my registry *dangerous*) and all things Android and reboot to a fresh power cycle (like with the phone) so Windows can update all its important files reguarding the driver removal. Then install and THEN plugin.
It literally randomly worked for me. I had the drivers installed properly, but the charging cord gave me "bad driver install". I didn't change a thing and plugged in wth the Belkin and was good to go.
Hope you can get it working! I know the anticipation of phone modding, and I love it! Lol!
Sent from my SPH-M910 using Tapatalk

Ditto, ditto and ditto! I have the same thing with my intercept, except I started on win7/64, could not get anything going. Then created an XP VM - over my dead body - no go.
Using the same cable, if I plug in my Captivate, everything comes up.
For you guys, when you bought a different cable, what did you buy? micro-to-micro USB? Or something else?
J

I usually use the cables that came with my HTC phones. Also I have better luck if I reboot the phone prior to connecting it to the PC.

My Galaxy S4 won't stay connected to the computer via USB

Hey all. Just got my Galaxy S4 today and I was loving everything about it until... right now. For some reason, the darn USB won't stay connected to the computer. It doesn't matter if it's simply plugged into the computer as an "installer" or as a media device. It'll constantly disconnect and reconnect itself, even when I'm not transferring any files.
It's not the my computer/USB ports, either, since I can transfer files between my HTC Thunderbolt and Nexus 7 fine. I've also tested 2 other USB cables and they all behave the same way.
Anyone know what's going on? Did I get a lemon?

No im in the same boat. Was trying ti connect in today. I reinstalled and un installed the drivers about 4 times. Tried un selecting usb debugging in developers menu. Installed kies and used the drivers from it still no good. Used 3 different usb leads. Phone will still charge from pc and even when im installing the drivers again and connect the phone it will say that your new device is ready to use but still cant access phone, it simply does not show up.
Wouldn mind was working 2 days ago fine. Same usb port and all. And the port is fine cause my old s3 still reads from the same port.

snwman said:
No im in the same boat. Was trying ti connect in today. I reinstalled and un installed the drivers about 4 times. Tried un selecting usb debugging in developers menu. Installed kies and used the drivers from it still no good. Used 3 different usb leads. Phone will still charge from pc and even when im installing the drivers again and connect the phone it will say that your new device is ready to use but still cant access phone, it simply does not show up.
Wouldn mind was working 2 days ago fine. Same usb port and all. And the port is fine cause my old s3 still reads from the same port.
Click to expand...
Click to collapse
same problem with me!
every thing ok with s3 but the problem only with s4
please we need help to solve this problem!

Same problem
I have also been dealing with this for a while now. I have Windows 7 64bit and I have reinstalled the drivers many times through Kies and manually. It seems like the problem is getting worse since initially I could do some file transfer through usb if i fiddled with the device (changing usb ports, unplugging it, etc). Now I am hard pressed to get it to show up on the computer through MTP at all.
This is quite annoying since I am developing an android app and I need a usb connection in order to test it. A fix would be awesome.

I just tested on my sister's laptop and it doesn't have this problem. I clicked around the phone, transferred a 10gb movie, and left it plugged in to see if there were any signs of disconnects. None whatsoever. Odd. Maybe Galaxy S4 just doesn't like something with our computers. This is quite annoying.
I have a fresh Windows 7 64-bit partition I installed the other day so I'll test it out on that and report the results later today.

retsnom said:
I just tested on my sister's laptop and it doesn't have this problem. I clicked around the phone, transferred a 10gb movie, and left it plugged in to see if there were any signs of disconnects. None whatsoever. Odd. Maybe Galaxy S4 just doesn't like something with our computers. This is quite annoying.
I have a fresh Windows 7 64-bit partition I installed the other day so I'll test it out on that and report the results later today.
Click to expand...
Click to collapse
I do same thing, it is worked in another computer.
I am already put fresh win 7 but still same problem..

im on xp(retro yeah ha ha) but just a pc i have for my phones and stuff. But i got it working again by flashing my firmware through odin and its back working. Im blaming when i rooted it that it broke but ill see if it happens again
edit: Can confirm pc is now picking up phone. I just flashed the most recent stock rom for my carrier through odin and as soon as it finished updating its prefect now. Might wait another while to root it now and wait for more devs to jump aboard for more roms

snwman said:
im on xp(retro yeah ha ha) but just a pc i have for my phones and stuff. But i got it working again by flashing my firmware through odin and its back working. Im blaming when i rooted it that it broke but ill see if it happens again
edit: Can confirm pc is now picking up phone. I just flashed the most recent stock rom for my carrier through odin and as soon as it finished updating its prefect now. Might wait another while to root it now and wait for more devs to jump aboard for more roms
Click to expand...
Click to collapse
I'm on stock, no root.

Hi
I don't know if it may help but i noticed the usb doesn't work when the phone is locked.
I did check 'stay active while charging' in dev parameters and i never got disconnected again.
Sent from my GT-I9505 using xda app-developers app

Tested it out on a fresh copy of Windows 7 and it still continuously disconnect. What gives?

taargaa said:
Hi
I don't know if it may help but i noticed the usb doesn't work when the phone is locked.
I did check 'stay active while charging' in dev parameters and i never got disconnected again.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Oops, missed your post. Unfortunately, it disconnects regardless of the phone's state.

My friend's S4 was doing the same thing on his desktop. Every time he would try to transfer pics the phone would disconnect after a few files.
I tried different things from reinstalling drivers to trying to only copy over a couple of files at a time, nothing worked.
Finally I plugged his phone into one of the back usb ports and transferred over 2gb with no problem and no disconnects since.
My guess is the S4 is a power hog and some usb ports just don't supply enough juice. Try plugging it in to a usb port that comes off a motherboard. Don't use the front ports or usb hubs. Hope this helps someone.

dirrtpoor said:
My friend's S4 was doing the same thing on his desktop. Every time he would try to transfer pics the phone would disconnect after a few files.
I tried different things from reinstalling drivers to trying to only copy over a couple of files at a time, nothing worked.
Finally I plugged his phone into one of the back usb ports and transferred over 2gb with no problem and no disconnects since.
My guess is the S4 is a power hog and some usb ports just don't supply enough juice. Try plugging it in to a usb port that comes off a motherboard. Don't use the front ports or usb hubs. Hope this helps someone.
Click to expand...
Click to collapse
I've been trying all kinds of different combinations of USB leads, phone settings and ports all morning and was just about getting ready to start a new Olympic sport of S4 hurling when I came across this post and plugged my USB straight into the back of my machine and it finally works!! Thank you dirrtpoor for your input - a simple fix, but nevertheless it worked.:good:
I suppose it makes sense that a quad core 1.9Ghz phone would be a power hog.

It wouldn't work on my home PC whatever I tried. Front or back USB ports.
On my dads PC sometimes it would display OK and other times "usb device has malfunctioned" (didn't try the rear USB port)
On my work PC it works fine on the rear ports.

I was having the same problem a few days ago, but then I reformatted the SD card, now everything seems OK.
Even the stock gallery app works now...?!

Guys I was having the same problem. For the life of me I couldn't figure out why suddenly my S4 wasn't being recognized by my computer. I finally went into developer options and noticed a "USB Debugging - Debugging mode launches when USB is connected" was turned on. I de-selected that, connected my phone and now my computer recognizes it again. I hope that helps guys, it helped me.

Samsung S4 sync problem
mgrisan1 said:
Guys I was having the same problem. For the life of me I couldn't figure out why suddenly my S4 wasn't being recognized by my computer. I finally went into developer options and noticed a "USB Debugging - Debugging mode launches when USB is connected" was turned on. I de-selected that, connected my phone and now my computer recognizes it again. I hope that helps guys, it helped me.
Click to expand...
Click to collapse
This may be laughably obvious but I'm a former Apple user, which has it's own dedicated USB connector, so I forget sometimes with the Samsung S4, which has a standard (looking) micro USB connector that I need a USB cable that is enabled for syncing as well as charging...not all USB cords with micro connectors on the phone end will carry the data because I imagine Samsung has made their phone's connector require a different wiring in the cable.
I was pulling my hair out yesterday trying to figure out why the computer wouldn't see the phone..then looked at the USB cable and realized I'd plugged a non-syncing cable in. I tried the cable that came with the phone and bingo, worked like it was supposed to.
Hope this helps, sometimes it's the little things we overlook that drive us nuts.

Any way to connect in master storage with out root.
Sent from my GT-I9500 using Tapatalk 4

Use a different usb cable and usb port. I know it sounds stupid but there has definitely been phantom problems which were solved this way, even with something as simple as adb commands

i have same problem. trying all the way but always with the same result...