Database Users

[SOLVED] HELP! Windows can't recognize the phone anymore

This is a new problem for me.
After successfully sorting out all the troubles of connecting SGS to KIES, and been using it happily for almost a month, now I'm facing another trouble which is quite big this time.
Windows Vista (32-bit) and Windows 7 (64-bit) are now can't recognize the phone when connected through the USB. Got a message says the USB Device/Hardware Is Not Recognized.
I'm using the SGS original cable. The cable was working perfectly and now suddenly it doesn't work in data mode but still able to recharge the phone battery.
Am I having a cable problem? Or worst, the USB connector (on the phone) problem? I tried to clean the USB connector on the phone but still can't connect the phone to my computers.
Does anybody here having the same problem as well?

I just gave up with my PC, same problem
In then end I set up a VMware XP machine to sync
Else I use my laptop
Sent from my GT-I9000M using XDA App

I sometimes have a problem with KIES detecting my phone. What I sometimes have to do is connect the phone with KIES loaded, go to device manager, show hidden devices then uninstall the phone (sometimes has error on device, sometimes not) then disconnect then reconnect phone.
Such a faff but using KIES to check for firmware update lol
This may not help ya but worth a thought, Im on Win7 64

I did not have any problem connecting the phone to KIES, I was able to upgrade the firmware from JF4 to JG4, and been a happy SGS owner for a month now.
But yesterday I suddenly can't connect the phone to any computers. My laptop (Win Vista 32-bit) said that a USB device connected is not recognized. I reinstall Kies in my laptop and same thing happen. Then I switch to my PC (Win7 64-bit), USB device not recognized also appear. Reinstall Kies, still no luck.
What I just realized is that there is NO USB Indicator in the SGS notification bar!
Does that mean that the USB connector on the phone going bad?
I still able to recharge the battery but the USB icon dont show up.
I am now seriously considering the quality of Samsung Galaxy S! Way too much problems for average owner, and even for savvy owners this is just over the top!
What should I do now?

Find another computer or install VMWear and see once and for all if its your phone at fault. Also worst case do a factory reset. If no go then you might have a hardware problem. You could always try Mass Storage mode and see if you can mount the phone as external drive. Its not really the phones fault but I would say its KIES, its just a piece of ****. I have never been able to connect to it using 3 computers and I would say I know what i'm doing since I work in i.t. Also did you replace your Launcher recently? As KIES needs TouchWhiz as default launcher to work

I just tried to connect SGS to another laptop (Win XP 32-bit SP3, no KIES though). Same thing, the USB device is not recognized baloon show up and no USB indicator in the SGS status bar.
I'm going to Samsung Service Center, after calling them, they suggest me to bring the phone to the nearest Samsung Center. They said that this is not the first time and also said that the problem might be the connector or the cable.

have you read this ? http://forum.xda-developers.com/showpost.php?p=8107646&postcount=50
Seems kies has a bug where it can't work with files with 16chrs or more.. Told ya KIES is a piece of ****
Yes, But did you try the Mass storage mode
Settings/About/USB

I always just use Mass Storage mode to xfer files. KIES is crap.

As I said previously, my SGS has no problem at all connecting to Kies. USB Mass storage is working perfectly as well.
The problem I'm having now is the hardware (the cable or the interface) I guess, since I still can recharge the phone using the charger or the USB cable.
ps. I'm using Kies from Australia, the 1.5.1.10083.

Have you looked at the pins on the phone? are they screwed? Can you somehow find or burrow another Mini-Usb cable to test ? I have heaps as some of my external hdd's use mini-usb but you might have to buy a new cable.

Try this.. I wrote this a while back.. It may help. I know you suspect it's hardware, but it might be worth trying anyway.
http://www.blog.gleff.com/2010/07/fix-for-kies-not-connecting-to-galaxy-s/

ickyboo said:
Have you looked at the pins on the phone? are they screwed? Can you somehow find or burrow another Mini-Usb cable to test ? I have heaps as some of my external hdd's use mini-usb but you might have to buy a new cable.
Click to expand...
Click to collapse
gleff1 said:
Try this.. I wrote this a while back.. It may help. I know you suspect it's hardware, but it might be worth trying anyway.
http://www.blog.gleff.com/2010/07/fix-for-kies-not-connecting-to-galaxy-s/
Click to expand...
Click to collapse
Thanks for the help guys!
It's purely hardware problem. Yesterday I brought it to local Samsung Service Center, and because they said this is not the first timer, the technician quickly open the device and gosh... dust and some fungus were collected near the microUSB port! I admit I never close the USB port, just left it open after use, my bad!
After some cleaning and testing, the microUSB is working again.
Now I'm a happy SGS user again!

but that doesn't explain how it works on one Windows (Win7) but not on another Windows (WinXP)

AllGamer said:
but that doesn't explain how it works on one Windows (Win7) but not on another Windows (WinXP)
Click to expand...
Click to collapse
The SGS wasn't recognized in ALL Windows versions, since it was a hardware problem.
Now SGS is recognized in ALL Windows versions.

download "usbdeview" and delete the usb drivers for the specific device.

"usb device not recognized" with two diff. win7 installations.

as title states.
It doesn't seem to be the samsung drivers
as I have uninstalled and reinstalled.
but the Android drivers. I have no Android drivers installed anymore
(the 3 of 4 that installs)
therefore i lose adb connectivity
*This has happened on 2 different Windows 7 installations. (switching between 2 different hdds, on this laptop)
I have usb debug on ofcourse.
I have uninstalled reinstalled latest samsung drivers.
I have installed pdanet drivers.
I have turned off phone, while connected then boot up. still no fix.
I am using acs froyo dk17. But this happened with dk05 as well.
Is there a fix for this?

I've had this problem twice. The way I fixed it was to wipe the sd card. Its a pain but that's what fixed it
Sent from my SPH-D700 using XDA App

If not a driver problem (doesn't sound like it is) the next *usual* suspect would be the usb cable. The samsung cable that shipped with these phones is crap. I got a 6' belkin one on amazon for $8 that has worked flawlessly.

Make sure you're not using a USB port that's on a hub or daughtercard. It should be one that's directly on the motherboard.

I kept fiddling with settings and rebooting both phone and computer and got past this once on my old win7 box. On my new one, I got nowhere after an hour or so. Worked first thing with the same cable on my win xp machine.
Plug your phone into a USB1 only hub, or on the same channel as a usb 1 keyboard or mouse and it will detect just fine... it won't really be useful because it won't be able to flash still (I believe it should detect as a composite device with several facets and only some of those are usb1-only compatible). I believe that the underlying problem is a bad implementation of the usb spec on one of the usb2 only parts, but I didn't feel like digging any deeper. I might try a win xp vm on the same physical hw to see if I can narrow it down to a win7 usb2 + device usb2 compatibility issue. Might be worth making sure our win7 patches are up to date, too.
Sent from my SPH-D700 using XDA App

Thanks for the replies guys.
The usb trick won't work because it's a laptop. And I tried all four of them. I only have windows 7 machines. One being a ultra sff and has like 12 usb ports. It hasn't failed me yet, but happens on the laptop.
It wouldn't hurt to get another cable, a longer one. And my sd is maxed out, I will pull it instead of format.
Thanks all
Sent from my SPH-D700 using Tapatalk

I had this problem. Plugged into the back instead if the hub and reinstalled everything. Now it's working like a charm on all usb ports. Really odd problem.
Sent from my SPH-D700 using XDA App

I had this problem. I was using a USB extension cable that was a bit long. All the other phones and USB devices worked fine with it. EPIC did not want to. I got the impression that EPIC needs more power from the USB port than most of these other devices. For me, skipping the USB extension cable did the trick. I also used a powered USB hub and that worked well too. You might want to try different USB ports. Some may provide more power than others. Also try a powered USB hub (some are built into monitors) if you have access to one.

I had the same issue with my laptop as well. It is most likely the cable. The samsung one is crap. I tried every port and installed the usb drivers a dozen times with no success. Used the cable from my wifes blackberry and worked on the first try. Just pick up a new cable. Try monoprice.com they have awesome deals.
Sent from my SPH-D700 using XDA App

I just had this problem, I switched my cable and then it worked fine.

hayabusa1300cc said:
as title states.
It doesn't seem to be the samsung drivers
as I have uninstalled and reinstalled.
but the Android drivers. I have no Android drivers installed anymore
(the 3 of 4 that installs)
therefore i lose adb connectivity
*This has happened on 2 different Windows 7 installations. (switching between 2 different hdds, on this laptop)
I have usb debug on ofcourse.
I have uninstalled reinstalled latest samsung drivers.
I have installed pdanet drivers.
I have turned off phone, while connected then boot up. still no fix.
I am using acs froyo dk17. But this happened with dk05 as well.
Is there a fix for this?
Click to expand...
Click to collapse
Also make sure your antivirus is off although that's likely not the culprit. Do you install the drivers as administrator?
Try a new cord. If that doesn't work, try deleting/uninstalling the device and/or hub from the device manager - plug the phone in, letting win7 do its worst by not recognizing it, then open the device manager and find the usb hub. try deleting/uninstalling. unplug the phone and scan for hardware changes. I think this may force windows to reinstall the drivers for the usb hub. Disclaimer, it's been a while since I spent significant time fooling with windows computers so take this advice at your own risk - I'm feeling my way like an old man with cataracts trying to find his way around his long-lost childhood home. in the dark. With unfamiliar furniture. In an earthquake. While in a wheelchair. With flat tires....
My computer did this for a while and now it doesn't although it's certainly possible I changed the cord I was using.

The best way to get drivers to work is install PDAnet IMO..
I had driver problems upon driver problems.. swapped cables, etc.
went through all the motions that you all are describing here and what fixed it for me was installing PDAnet. Worked like a charm.
Hope this helps.

I agree about using pdanet for drivers. Unfortunately this problem isn't with the driver not being installed correctly. I got it on one machine and not another, using the same friver. In fact I got it to work on the same machinewith the same driver ... just different ports (one was stuck in usb1/ohci nd worked, the usb2 port never worked on one machine and a usb1 port never worked on a different one).
Sent from my SPH-D700 using XDA App

warlar12 said:
I just had this problem, I switched my cable and then it worked fine.
Click to expand...
Click to collapse
This worked for me when I had the problem. This will be the second time I had a usb cable go bad on me. Maybe I shouldn't buy those cheap ones from China...

I've had this problem with numerous cables on Dell E series laptops with 3 Epics and a Moment. For the life of me I couldn't get the phone to be recognized when using the USB ports on the left side of the machine. Plugged it into the ones on the right and have never had a problem. I think with the Dells it's a low current issue on the left side ports. The shorter the USB cable the better off you'll be if it is a low current problem.

thanks but i did alot of that last night and today, uninstall/reinstall drivers, usb hubs.. nothing
i may need to try another cable because i am workign on a friends epic sunday.
bilestoad said:
Also make sure your antivirus is off although that's likely not the culprit. Do you install the drivers as administrator?
Try a new cord. If that doesn't work, try deleting/uninstalling the device and/or hub from the device manager - plug the phone in, letting win7 do its worst by not recognizing it, then open the device manager and find the usb hub. try deleting/uninstalling. unplug the phone and scan for hardware changes. I think this may force windows to reinstall the drivers for the usb hub. Disclaimer, it's been a while since I spent significant time fooling with windows computers so take this advice at your own risk - I'm feeling my way like an old man with cataracts trying to find his way around his long-lost childhood home. in the dark. With unfamiliar furniture. In an earthquake. While in a wheelchair. With flat tires....
My computer did this for a while and now it doesn't although it's certainly possible I changed the cord I was using.
Click to expand...
Click to collapse

It HAS to be the power differences NOT cable.
Same cable as I charge with, plugged into the front of the computer (hub).
Plugged into the back of the computer recignized the first time.
=USB power

In my case, tried several micro USB cables, no dice. Tried my laptop and desktop, no dice. Tried USB hub or direct to PC usb ports, no dice. Device manager shows the right comm port but all the one-click roots i've tried can't find the phone. USB storage has never mounted for me from day one either.
Sigh, never had this issue with any other Android phone.

Finally figured out my issue. I had set it to "modem" while doing something else in an epst menu rather than "pda". Since I corrected that, works dandy.
I feel so stupid.
Forgive My Brevity. To Be Or Not To Be...

Would using my friends droid x cable work with the Samsung epic?
Sent from my SPH-D700 using XDA App

[Q] Epic not mounting

I cannot get my epic to mount for ANYTHING! I factory wiped the phone, nope, I used a palm pre usb cable nope, I downloaded the official samsung drivers nope, I plugged the cable into the motherboard on the computer nope, I tried a different computer running windows 7, nope tried a laptop using windows vista, nope. Does anyone know ANY WAY POSSIBLE to get this thing to mount? I selected mass storage and dissabled and enabled usb debugging. Im just not having any luck. It seems that the computer recognizes the phone is connected just cant get to the files on the SD card.

I also spent many hours trying to figure out what the hell was wrong with my Epic, that is, why it would come up as a "malfunction" in Windows when I plugged the USB cable in.
I tried drivers, different restore points, wiping, etc. etc. etc.
To the point... Try a new USB cable. The one packaged with the Epic is junk. As a matter of fact, it worked several times before it crapped out. I have no idea why, but I picked up a new micro USB cable, plugged it in, and the phone was then immediately recognized by my computer to allow mass storage mount.
People who tried the Palm Pre USB cable also had issues for some reason.
IMO, there should be a sticky posted in this board regarding the packaged USB cable, as I encounter this issue quite a bit.

Ok I'll try to find a new one really quick thanks

ugh tried an HTC Mytouch 4g usb cable and that didnt work either. Gonna try a class 4 usb stick and im gonna try puttting all of the files on the computer from the SD card
Edit: Oh wow i cant put the files on the computer duh
Edit: Ok now I'm mad a Class 4 SD card wont connect to the computer thru the epic ughhhh

I'm guessing during this time, you've rebooted the computer a few times? Sometimes, that's all it takes...
Try uninstalling ALL of the USB drivers associated with the Epic, rebooting the computer, then connecting (with debug mode OFF). Windows found and installed the USB drivers for me in just a few seconds when I did this [with the new cable, the first time].
- G

Have u enabled development mode under settings > applications (in your) epic? If not, try that, then plug in cable.
Then pull down the notification bar and it'll give you back the option.. again, if you haven't tried this.

On occasion I have troubles with the Epic mounting/ejecting on a Mac, but the only time I've ever had an issue with it mounting on a PC a different cable solved the problem immediately.

Try a different USB port on your PC. If that doesn't work, try rebooting the PC and the phone.
I had luck with trying different usb ports though

I had this problem as well and:
1. Tried 4 different cables
2. Tried all 4 on all 4 different USB ports
3. Rebooted numerous times
4. Uninstalled/reinstalled drivers
5. Tried 3 different PCs (1 other running 7 and another running Vista)
6. Did 1-4 on all three computers.
OH! and the reason I was so adamant about finding a solution was that I was stuck in Clockwork... due to having messed up an EXT4/RFS/CW2.5/CW3.0 installation... It was MY fault... I screwed up.
The problem was I had been living with the nonmounting problem by simply putting my MicroSD into an adapter and plugging it into my Laptop for file transfers... never expecting to HAVE to ODIN at some time...
Anyway... I ended up coughing up the $100 to Insurance and replacing the phone.
HERE IS MY THEORY: I think what my problem was was that the USB port on the Phone was messed up. I think these USB ports are possibly a hardware fail point and the changing of cables has been a patch on the issue with the port... NOT the cables themselves!
I'm not suggesting that you are there yet since it sounds like you can at least still get the phone to boot up (and aren't stuck in CW) and could still use a work around of putting files on the MicroSD with an adapter...
But I would suggest you don't be as stupid as me and get yourself in a position where ODIN is your only hope.

Yeah, it sounded like a bad USB port to me. Also, FYIY, if you ever have to replace the phone through insurance, tell them that the phone was lost. Either way, it will cost you $100.00 to get a replacement and when it's reported as lost, they will also send you a new battery...

OregonLAN said:
Yeah, it sounded like a bad USB port to me. Also, FYIY, if you ever have to replace the phone through insurance, tell them that the phone was lost. Either way, it will cost you $100.00 to get a replacement and when it's reported as lost, they will also send you a new battery...
Click to expand...
Click to collapse
You don't really think that I sent in a phone that was stuck in CW do you? I don't think that would have worked too well for me.....
Cheers!

Did you end up doing an ODIN restore

Nexus S is no longer recongized by PC

My nexus S is no longer recognized as usb storage. It's not being recognized at all by my pc. The "turn to usb storage" option never comes up on the phone. The phone charges fine though! Even through the computer it reads as charging but usb never comes up. Now I can't move things between the phone and computer.
I bought this from Negri and am using it on ATT. Since this is an import phone from Canada and I'm just outside of Negri's weird 25 day return policy, am i screwed? Or is there a way I can get it to recognize again?

Buy a nice micro usb cord. The one Samsung packs in is crap.
Sent from my Nexus S 4G using XDA Premium App

dak148 said:
My nexus S is no longer recognized as usb storage. It's not being recognized at all by my pc. The "turn to usb storage" option never comes up on the phone. The phone charges fine though! Even through the computer it reads as charging but usb never comes up. Now I can't move things between the phone and computer.
I bought this from Negri and am using it on ATT. Since this is an import phone from Canada and I'm just outside of Negri's weird 25 day return policy, am i screwed? Or is there a way I can get it to recognize again?
Click to expand...
Click to collapse
Try it on a different computer?

Had this problem and I resolved it by plugging it into a USB 2.0 port. I also downloaded the Android SDK and the USB drivers.

Underking said:
Had this problem and I resolved it by plugging it into a USB 2.0 port. I also downloaded the Android SDK and the USB drivers.
Click to expand...
Click to collapse
SAME PROBLEM, after manually installing 2.3.4(Which I have already posted about.)Tried both my work PC(Win XP) and my home notebook (Win 7 Prof. x64 bit) and neither work. Tried the SDK and updating the drivers, didn't work(Could you list the steps?) Thought about rooting, unlocking bootloader, & CWM but all require USB connectivity. Been posting all week but no one seems to have any answers (or just doesn't respond). Maybe the more this problem keeps coming up the more people will start discussing fixes.

had this problem before but luckily it was the cable

My Galaxy S4 won't stay connected to the computer via USB

Hey all. Just got my Galaxy S4 today and I was loving everything about it until... right now. For some reason, the darn USB won't stay connected to the computer. It doesn't matter if it's simply plugged into the computer as an "installer" or as a media device. It'll constantly disconnect and reconnect itself, even when I'm not transferring any files.
It's not the my computer/USB ports, either, since I can transfer files between my HTC Thunderbolt and Nexus 7 fine. I've also tested 2 other USB cables and they all behave the same way.
Anyone know what's going on? Did I get a lemon?

No im in the same boat. Was trying ti connect in today. I reinstalled and un installed the drivers about 4 times. Tried un selecting usb debugging in developers menu. Installed kies and used the drivers from it still no good. Used 3 different usb leads. Phone will still charge from pc and even when im installing the drivers again and connect the phone it will say that your new device is ready to use but still cant access phone, it simply does not show up.
Wouldn mind was working 2 days ago fine. Same usb port and all. And the port is fine cause my old s3 still reads from the same port.

snwman said:
No im in the same boat. Was trying ti connect in today. I reinstalled and un installed the drivers about 4 times. Tried un selecting usb debugging in developers menu. Installed kies and used the drivers from it still no good. Used 3 different usb leads. Phone will still charge from pc and even when im installing the drivers again and connect the phone it will say that your new device is ready to use but still cant access phone, it simply does not show up.
Wouldn mind was working 2 days ago fine. Same usb port and all. And the port is fine cause my old s3 still reads from the same port.
Click to expand...
Click to collapse
same problem with me!
every thing ok with s3 but the problem only with s4
please we need help to solve this problem!

Same problem
I have also been dealing with this for a while now. I have Windows 7 64bit and I have reinstalled the drivers many times through Kies and manually. It seems like the problem is getting worse since initially I could do some file transfer through usb if i fiddled with the device (changing usb ports, unplugging it, etc). Now I am hard pressed to get it to show up on the computer through MTP at all.
This is quite annoying since I am developing an android app and I need a usb connection in order to test it. A fix would be awesome.

I just tested on my sister's laptop and it doesn't have this problem. I clicked around the phone, transferred a 10gb movie, and left it plugged in to see if there were any signs of disconnects. None whatsoever. Odd. Maybe Galaxy S4 just doesn't like something with our computers. This is quite annoying.
I have a fresh Windows 7 64-bit partition I installed the other day so I'll test it out on that and report the results later today.

retsnom said:
I just tested on my sister's laptop and it doesn't have this problem. I clicked around the phone, transferred a 10gb movie, and left it plugged in to see if there were any signs of disconnects. None whatsoever. Odd. Maybe Galaxy S4 just doesn't like something with our computers. This is quite annoying.
I have a fresh Windows 7 64-bit partition I installed the other day so I'll test it out on that and report the results later today.
Click to expand...
Click to collapse
I do same thing, it is worked in another computer.
I am already put fresh win 7 but still same problem..

im on xp(retro yeah ha ha) but just a pc i have for my phones and stuff. But i got it working again by flashing my firmware through odin and its back working. Im blaming when i rooted it that it broke but ill see if it happens again
edit: Can confirm pc is now picking up phone. I just flashed the most recent stock rom for my carrier through odin and as soon as it finished updating its prefect now. Might wait another while to root it now and wait for more devs to jump aboard for more roms

snwman said:
im on xp(retro yeah ha ha) but just a pc i have for my phones and stuff. But i got it working again by flashing my firmware through odin and its back working. Im blaming when i rooted it that it broke but ill see if it happens again
edit: Can confirm pc is now picking up phone. I just flashed the most recent stock rom for my carrier through odin and as soon as it finished updating its prefect now. Might wait another while to root it now and wait for more devs to jump aboard for more roms
Click to expand...
Click to collapse
I'm on stock, no root.

Hi
I don't know if it may help but i noticed the usb doesn't work when the phone is locked.
I did check 'stay active while charging' in dev parameters and i never got disconnected again.
Sent from my GT-I9505 using xda app-developers app

Tested it out on a fresh copy of Windows 7 and it still continuously disconnect. What gives?

taargaa said:
Hi
I don't know if it may help but i noticed the usb doesn't work when the phone is locked.
I did check 'stay active while charging' in dev parameters and i never got disconnected again.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Oops, missed your post. Unfortunately, it disconnects regardless of the phone's state.

My friend's S4 was doing the same thing on his desktop. Every time he would try to transfer pics the phone would disconnect after a few files.
I tried different things from reinstalling drivers to trying to only copy over a couple of files at a time, nothing worked.
Finally I plugged his phone into one of the back usb ports and transferred over 2gb with no problem and no disconnects since.
My guess is the S4 is a power hog and some usb ports just don't supply enough juice. Try plugging it in to a usb port that comes off a motherboard. Don't use the front ports or usb hubs. Hope this helps someone.

dirrtpoor said:
My friend's S4 was doing the same thing on his desktop. Every time he would try to transfer pics the phone would disconnect after a few files.
I tried different things from reinstalling drivers to trying to only copy over a couple of files at a time, nothing worked.
Finally I plugged his phone into one of the back usb ports and transferred over 2gb with no problem and no disconnects since.
My guess is the S4 is a power hog and some usb ports just don't supply enough juice. Try plugging it in to a usb port that comes off a motherboard. Don't use the front ports or usb hubs. Hope this helps someone.
Click to expand...
Click to collapse
I've been trying all kinds of different combinations of USB leads, phone settings and ports all morning and was just about getting ready to start a new Olympic sport of S4 hurling when I came across this post and plugged my USB straight into the back of my machine and it finally works!! Thank you dirrtpoor for your input - a simple fix, but nevertheless it worked.:good:
I suppose it makes sense that a quad core 1.9Ghz phone would be a power hog.

It wouldn't work on my home PC whatever I tried. Front or back USB ports.
On my dads PC sometimes it would display OK and other times "usb device has malfunctioned" (didn't try the rear USB port)
On my work PC it works fine on the rear ports.

I was having the same problem a few days ago, but then I reformatted the SD card, now everything seems OK.
Even the stock gallery app works now...?!

Guys I was having the same problem. For the life of me I couldn't figure out why suddenly my S4 wasn't being recognized by my computer. I finally went into developer options and noticed a "USB Debugging - Debugging mode launches when USB is connected" was turned on. I de-selected that, connected my phone and now my computer recognizes it again. I hope that helps guys, it helped me.

Samsung S4 sync problem
mgrisan1 said:
Guys I was having the same problem. For the life of me I couldn't figure out why suddenly my S4 wasn't being recognized by my computer. I finally went into developer options and noticed a "USB Debugging - Debugging mode launches when USB is connected" was turned on. I de-selected that, connected my phone and now my computer recognizes it again. I hope that helps guys, it helped me.
Click to expand...
Click to collapse
This may be laughably obvious but I'm a former Apple user, which has it's own dedicated USB connector, so I forget sometimes with the Samsung S4, which has a standard (looking) micro USB connector that I need a USB cable that is enabled for syncing as well as charging...not all USB cords with micro connectors on the phone end will carry the data because I imagine Samsung has made their phone's connector require a different wiring in the cable.
I was pulling my hair out yesterday trying to figure out why the computer wouldn't see the phone..then looked at the USB cable and realized I'd plugged a non-syncing cable in. I tried the cable that came with the phone and bingo, worked like it was supposed to.
Hope this helps, sometimes it's the little things we overlook that drive us nuts.

Any way to connect in master storage with out root.
Sent from my GT-I9500 using Tapatalk 4

Use a different usb cable and usb port. I know it sounds stupid but there has definitely been phantom problems which were solved this way, even with something as simple as adb commands

i have same problem. trying all the way but always with the same result...