hi guys .
i have a problem and i hope it will be easy to skip it......
i cant make a connect between the phone and the pc with the program that you say its work ( MyPhoneExplorer ) final version ( i download it today from the officeal site ) and not working and it give me a masseage say : no device founded
mean :how i can to make connection between android hd mini and the MyPhoneExplorer program
note 1 : i have 30/5/2011 version
note 2 : i'm sorry if the question is writeing before because i'm search in forums but i dont found an answer ..
thanks
use droid explorer
then go in settings>applications>development and enable usb debugging
connect phone,open droid explorer and click refresh,then computer will see the phone
tzacapaca
_________
do you mean i must dont use MyPhoneExplorer and i must use droid explorer that made it by htc
zaem said:
tzacapaca
_________
do you mean i must dont use MyPhoneExplorer and i must use droid explorer that made it by htc
Click to expand...
Click to collapse
you must use whatever you want
droid explorer is not made by htc..but is the only one which works right now for htc hd mini
hi
i'm download droid explorer and install it .
but it's not work ?
note : i'm follow this note : settings>applications>development and enable usb debugging
and i'm try to set the connection type on charge only and not work
and try htc sync and not work
and try disk drive and not work
and try usb tethering and not work
zaem said:
hi guys .
i have a problem and i hope it will be easy to skip it......
i cant make a connect between the phone and the pc with the program that you say its work ( MyPhoneExplorer ) final version ( i download it today from the officeal site ) and not working and it give me a masseage say : no device founded
mean :how i can to make connection between android hd mini and the MyPhoneExplorer program
note 1 : i have 30/5/2011 version
note 2 : i'm sorry if the question is writeing before because i'm search in forums but i dont found an answer ..
thanks
Click to expand...
Click to collapse
which version of Windows you use? I have windows 7 64 bit, and DroidExplorer.0.8.8.2.x64 ... no problems have been experiencing.
zaem said:
hi
i'm download droid explorer and install it .
but it's not work ?
note : i'm follow this note : settings>applications>development and enable usb debugging
and i'm try to set the connection type on charge only and not work
and try htc sync and not work
and try disk drive and not work
and try usb tethering and not work
Click to expand...
Click to collapse
wait for new Android version and HTC Sync will work
Related
guyz.. i m new to touch hd and not sure as in how u install all stuffs on to the mobile coz with the other mobiles u get a cd but with touch hd i dint get any cd's.. kindly help me...
mahe2209 said:
guyz.. i m new to touch hd and not sure as in how u install all stuffs on to the mobile coz with the other mobiles u get a cd but with touch hd i dint get any cd's.. kindly help me...
Click to expand...
Click to collapse
Simply turn the phone on. Most settings with install automatically.
Read the wiki pages and hopefully these will guide you further
You will need to sync your phone to your pc using activesync and your usb cable which comes with the phone.
Most applications/software will come in either .exe or.cab format. All .exe files are installed from youir pc while phone is sync'd. Just follow the on screen instructions once you open the file.
.cab files are installed directly from your phone. Once your phone is sync'd to your computer via usb cable transfer .cab file to your phone using file explorer then open file on your phone using phone file explorer
Hope this helps
hiiiiii every body
i have i-mate jasjar
and i lost the CD , SO PLZ I NEED JASJAR DRIVER
may any body give me the driver very soon ????
iam waiting friends
thank you
Hi Anas, what do you mean buy 'driver'. Everything, as far as I know, is accomplished by ActiveSync. Please describe your need better (I have original Orange CD).
The only driver on the CD supplied with the i-mate JASJAR is the USB modem driver. I have attached it here as a ZIP archive. In it you'll also find the PDF with instructions on how to use the driver.
Hope this is what you're looking for.
abubasim said:
The only driver on the CD supplied with the i-mate JASJAR is the USB modem driver. I have attached it here as a ZIP archive. In it you'll also find the PDF with instructions on how to use the driver.
Hope this is what you're looking for.
Click to expand...
Click to collapse
____________________________
thank you MR.JONNY
>>>>>>>>>>>>>
thank you MR.ABUBASIM
BUT I DO NOT WANT THAT
i will describe my needs
i tried to upgrade my mobile to wm6.1 ,then i found my mobile in the bootleader screen ,and the upgade is faild ,in this time i was too tired and went to sleep after sleeping i found my young brother already formated the partition c in my computer
and when i tried to connecting my mobile with my computer , my computer cannot make connection with my mobile ( found new hardware ) and i lost my jasjar CD .
NOW HOW CAN I MAKE CONNECTION BETWEEN MY MOBILE AND MY COMPUTER .
WAITING YOUR HELP AND THANK YOU VERY MUCH
abubasim said:
The only driver on the CD supplied with the i-mate JASJAR is the USB modem driver. I have attached it here as a ZIP archive. In it you'll also find the PDF with instructions on how to use the driver.
Hope this is what you're looking for.
Click to expand...
Click to collapse
____________________________
thank you MR.JONNY
>>>>>>>>>>>>>
thank you MR.ABUBASIM
BUT I DO NOT WANT THAT
i will describe my needs
i tried to upgrade my mobile to wm6.1 ,then i found my mobile in the bootleader screen ,and the upgade was faild ,in this time i was too tired and went to sleep after sleeping i found my young brother already formated the partition c in my computer
and when i tried to connecting my mobile with my computer , my computer cannot make connection with my mobile ( found new hardware ) and i lost my jasjar CD .
NOW HOW CAN I MAKE CONNECTION BETWEEN MY MOBILE AND MY COMPUTER .
WAITING YOUR HELP AND THANK YOU VERY MUCH
Then you need Active Sync (Windows 2000/XP) or Mobile Device Center (Vista/7) which are free downloads from Microsoft.
Thank you mr.abubasim
abubasim said:
then you need active sync (windows 2000/xp) or mobile device center (vista/7) which are free downloads from microsoft.
Click to expand...
Click to collapse
________________________________
thank you mr.abubasim for your reply
but i want the cd ( which come with the jasjar mobile )
you can upload it on this site and i will download and install it on my computer then i will upgrade my mobile to wm 6.1 , because you know that i must insert and install the jasjar cd on my computer then install windows mobile center then upgrade my mobile and you know i havenot the cd .
So all what i want is { the cd of jasjar }
plz send it to me soon
thank you again
Sorry, I don't have access to the CD myself right now, but I'm wondering if it would be of any help to you as it only contains the following four things:
1. Active Sync 4.0 (will not run under Windows Vista)
2. Microsoft Outlook 2002 (fully licensed and needs a product key)
3. USB Modem Driver
4. Manuals in PDF format.
Active Sync here
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-synch.mspx
(Or perhaps there's others if you're non-english)
Hi all
i'm using rhodium and i try to synchronize it with my outlook 2007 on windows seven ultimate.
drvupdate-amd64.exe for windows device center
but impossible to connect it i have : Microsoft Windows Mobile Remote Adapter driver with pb...
i try to uninstall reinstall many times...i never have this pb before..
first i used the original rom from htc the newest with 6.5 but impossible to connect with WMDC..
try to reinstall with nrgz28 rom...but same...
i will try to reinstall old rom from htc...but i'm not sure it will work...
do you have any idea?
(if i uncheck "Enable advanced network functionality" on usb to pc, seem to connect but nothing more happen or very very very very very slow...)
thanks
ps 1 : install first rom of htc original one...always same pb...please help need to connect it !
up..please need help
Microsoft Windows Mobile Remote Adapter always wrong....
up up up up up
kwanice said:
Hi all
i'm using rhodium and i try to synchronize it with my outlook 2007 on windows seven ultimate.
drvupdate-amd64.exe for windows device center
but impossible to connect it i have : Microsoft Windows Mobile Remote Adapter driver with pb...
i try to uninstall reinstall many times...i never have this pb before..
first i used the original rom from htc the newest with 6.5 but impossible to connect with WMDC..
try to reinstall with nrgz28 rom...but same...
i will try to reinstall old rom from htc...but i'm not sure it will work...
do you have any idea?
(if i uncheck "Enable advanced network functionality" on usb to pc, seem to connect but nothing more happen or very very very very very slow...)
thanks
ps 1 : install first rom of htc original one...always same pb...please help need to connect it !
Click to expand...
Click to collapse
Ok, here goes. I thought I had the same problem but all in all wm device center installed and I could sync, but not before searching and searching.
First and foremost, make sure wm device center is installed and updated with windows update.
2. Plug in device and wait for it to say that device software is installing.
3. Click on start button, and right click on computer. Select manage.
4. Up comes computer management.
5. Select device manager
6. Open network adapters and look for Microsoft Windows Mobile remote adapter and right click on it. Select uninstall.
7. Once it is uninstalled unplug your device and plug it back in. Should be noticed and installed and able to sync again.
I am also using windows 7 64 bit with a new TP2. If that does not work, go to this website and it has other possibilities....
http://www.microsoft.com/windowsmobile/en-us/help/synchronize/device-center-troubleshooting.mspx
Good luck and let us know if you get it working.
thanks for your answer but..doesn't work :s
I've tried with my old phone my kaiser and it's work !...:s it's amazing...
i've plug after my tp2 and it's not working!... i've tried it on seven 32bits on another pc and it's work!... :s
i dont understand...:s
Ok, do this. Open task manager and go to Processes tab. Scroll to the bottom and look for wmplayer.exe. It shouldn't be there. Now plug in your device and watch for it to come up. If it pops up and then goes away then let me know and we'll go from there.
i never used wmplayer...
and it's not in my process...
sorry
kwanice said:
i never used wmplayer...
and it's not in my process...
sorry
Click to expand...
Click to collapse
It's not a matter of you using it or not. When you plug in and your computer recognizes it, you'll see wmplayer.exe come up and should stay up while being connected. Try one of your good phones and you'll see it pop up and stay. Just make sure you have task manager up and on Processes.
If it pops up and then goes away, there is a work around but is a big pain in the butt.
You could also have a bad phone. I know one of my HTC Advantages went bad and I had to send it in for a new one because it could not be recognized at all. I even went as far as doing a fresh install on the computer hoping maybe that would work. Turns out nothing did.
Let me know if you see the wmplayer come up or not.
I have also read that it could be a .dll issue, but if it won't work on any other computers that are working fine, then I'm going to run with a bad device.
i try with my kaiser : no wmplayer.exe or else opened juste programm for synchronisation..
and when i plug my tp2 nothing hapened..:s
crazy thing...
will i put it in my trash ? or buy an iphone lol....:s
ps : thanks for your help
kwanice said:
i try with my kaiser : no wmplayer.exe or else opened juste programm for synchronisation..
and when i plug my tp2 nothing hapened..:s
crazy thing...
will i put it in my trash ? or buy an iphone lol....:s
ps : thanks for your help
Click to expand...
Click to collapse
I had to edit because I realized I was wrong with windows seven. I believe you might have a bad phone. Have tried using mtty yet?
mtty for?
to see if i can communicate with the phone? for what use?...
thanks
mtty checks the usb connection on the device. You disable usb in activesync/windows mobile device center and then plug in your phone. Run mtty and select usb from the drop down. Then there are several codes you can enter to check for usb connectivity. What the codes are I don't know off the top of my head, but you can do a search and it will give you them on the forums. It is actually a pretty small but usefull piece of software.
thanks a lot for your advice !
i will try tomorrow too tired tonight
i think it will be the last chance after i think i will go where i bought my phone to change it, maybe there is a probleme with my phone...
thanks again
so i try this morning...
impossible to see in mtty the USB port....:s only com1 and com2
i only see usb port when i plug my phone on bootloader and i saw USB on the bottom of screen but i cant do anything....nothing work
when i plug my phone on windows seven, i can choose activesync or disk or internet share : and only the first doesnt work...:s i can use my phone like usb driver or share my internet connexion ...
i think i will phone to the shop because i'm become to be crazy !
hi so i try to test several thing :
on my P4 on windows seven 32b
- kaiser : OK
- Rhodium : OK
on my i5 750 asus p55d seven 32Bits
- Kaiser : OK
- Rhodium : NO
on my i5 750 asus p55d seven 64Bits
- Kaiser : OK
- Rhodium : NO
i dont understand...seem to have a problem with my rhodium with my computer !
i dont know why...:s very space!
have an idea?
kwanice said:
hi so i try to test several thing :
on my P4 on windows seven 32b
- kaiser : OK
- Rhodium : OK
on my i5 750 asus p55d seven 32Bits
- Kaiser : OK
- Rhodium : NO
on my i5 750 asus p55d seven 64Bits
- Kaiser : OK
- Rhodium : NO
i dont understand...seem to have a problem with my rhodium with my computer !
i dont know why...:s very space!
have an idea?
Click to expand...
Click to collapse
I know this sounds like a stupid question, but have you ran a registry cleaner or defrag program on your windows seven machine? If no then again I'm at a loss and will research this some more since I have time tonight. If so, then that more than likely is the culprit because I have ran different registry defrag/cleaner programs and once done, then windows mobile device does not function properly and I have to restore the registry from the back up that I would make prior to deletion. We'll get it figured out.....I hope.
it's really amazing... i try all the settings and all os...
for th e last try ..i try to update my bios....
and..
IT WORK'S !!
i dont know why..:s i dont know if the bios is really the problem...
when i flash the bios, Microsoft Windows Mobile Remote Adapter is ok ! without problem !
i need to delete one time the partner ship
and now all is ok !
i want to say : Just about right you are great ! you are the only one in this forum who try to help me, and it's so good! thansk again a lot my friend ! if i can help you pm me
bye !
kwanice said:
it's really amazing... i try all the settings and all os...
for th e last try ..i try to update my bios....
and..
IT WORK'S !!
i dont know why..:s i dont know if the bios is really the problem...
when i flash the bios, Microsoft Windows Mobile Remote Adapter is ok ! without problem !
i need to delete one time the partner ship
and now all is ok !
i want to say : Just about right you are great ! you are the only one in this forum who try to help me, and it's so good! thansk again a lot my friend ! if i can help you pm me
bye !
Click to expand...
Click to collapse
I'm glad you figured it out and it is strange that the BIOS fixed it, but hay if it worked, great. I know this is a constant issue for wmdc and windows mobile devices, so that is why I tryed to help out. I gave you what I learned from my experiences and searching this forum like crazy. Thank and I might take you up on the PM one day.
kwanice said:
Hi all
i'm using rhodium and i try to synchronize it with my outlook 2007 on windows seven ultimate.
drvupdate-amd64.exe for windows device center
but impossible to connect it i have : Microsoft Windows Mobile Remote Adapter driver with pb...
i try to uninstall reinstall many times...i never have this pb before..
first i used the original rom from htc the newest with 6.5 but impossible to connect with WMDC..
try to reinstall with nrgz28 rom...but same...
i will try to reinstall old rom from htc...but i'm not sure it will work...
do you have any idea?
(if i uncheck "Enable advanced network functionality" on usb to pc, seem to connect but nothing more happen or very very very very very slow...)
thanks
ps 1 : install first rom of htc original one...always same pb...please help need to connect it !
Click to expand...
Click to collapse
For future reference:
I had the same prob with energy photon/WMDC/Windows 7
Untick "ask me 1st about usb conection type" in USB to PC, then soft reset
Prroblem solved!
Guys,
I have put up Android to my HD2 - Tmob ( Meedjay new version ) . But it wont show the 3G/HSDPA ...how to config settings to add da APN ??
And the other thing is does the Inertet sharing through Pc function works ?? i really need to use it ....and when i plug in the phone , my pc dsnt recognise it ?? ADB thing wont get installed !! how can i do that ??
Jazor28 said:
Guys,
I have put up Android to my HD2 - Tmob ( Meedjay new version ) . But it wont show the 3G/HSDPA ...how to config settings to add da APN ??
And the other thing is does the Inertet sharing through Pc function works ?? i really need to use it ....and when i plug in the phone , my pc dsnt recognise it ?? ADB thing wont get installed !! how can i do that ??
Click to expand...
Click to collapse
all of the answers to your questions can be found by searching this forum.
For starters go to APN settings and enter epc.tmobile.com, that should get you 3G and H.
The WiFi tether and Wired Tether you need the apk, I don't think these work natively on that ROM but I could be wrong.
AS ABOVE
i've followed the steps , dont say im a leecher cause i read through all.
host file checked - no window developer services
regedit.exe - edited the registry
installed zune
installed microsoft sdk
activation code - gotten
network adapters were disabled when trying the steps below
so how i go about doing this and it doesnt work
1 : connect phone and install cert
2 : start WPConnect.exe to establish a connection
3 : Start zune
4 : place unlocker at C:\
5: error messages pops out .
tried on my laptop and desktop all same problem.
PS , ive been doing all this for two days , researching every night till3am while i have school next day. i have no idea what i still need to do.
Try to restart the computer, maybe some IM software took the port 443
Thats what I did
any other help ?... i check for the port too already. i will try it now again
Start zune first esablish connection, THEN run chevron by right clicking and choosing "Run As Admin"
TheATHEiST said:
Start zune first esablish connection, THEN run chevron by right clicking and choosing "Run As Admin"
Click to expand...
Click to collapse
tried , no avail
lionhart1001987 said:
tried , no avail
Click to expand...
Click to collapse
thats it ? ... no help ?
lionhart1001987 said:
thats it ? ... no help ?
Click to expand...
Click to collapse
Why are you quoting yourself??
Also people have tried to help you, Yu are obviously doing something wrong or there is something on your pc that is blocking your connection, try and read some guides and disable anything that could potentially be blocking it.
lionhart1001987 said:
thats it ? ... no help ?
Click to expand...
Click to collapse
OK start up your mobile. Is the date and time correct (Very important) if all ok then start zune. open up the chevron on c/drive and see if it will connect with ot the Ohno message.
You may have to do this a few times. try the other computer as well.
Some guy's can get the chevron to work, by puting the date a few months forward NOT back.
If you do manage to get the chevron unlocked, then dont lock it.
Make sure to swith off spyware detectors, and put your antivirus into stand by mode until you complete this tasks.
and read this thread: http://forum.xda-developers.com/showthread.php?t=912218
Russ