Anyone else find that the wm3003 hotfix does not work with this build? I get the error that it only works on build 4.20.1081. I kept getting this error on soft reset and had to remove files from the startup one by one to figure it out. Your comments are appreciated.
Valheru,
Where did you get the new ROM and I will give a go on my SX56.
Julian
I also would like to get the new rom please
silt247 said:
I also would like to get the new rom please
Click to expand...
Click to collapse
guys look one thread next to this "looking for testers....." in thi same forum
http://forum.xda-developers.com/viewtopic.php?t=5492
Hi upgraded to the new o2 rom. smashing fast as hell no issues all good.
everything is as setup how i like, but am missing the multidedia folder. If i go media config everything is there but am missing the mms folder??? Had anyone got a cab to do this. Am also missing the o2 3g video connections :S
Help then its all good from here :S
meepatme said:
Hi upgraded to the new o2 rom. smashing fast as hell no issues all good.
everything is as setup how i like, but am missing the multidedia folder. If i go media config everything is there but am missing the mms folder??? Had anyone got a cab to do this. Am also missing the o2 3g video connections :S
Help then its all good from here :S
Click to expand...
Click to collapse
I also miss a cab. file. If anyone has the missing cab. file, please...
Anita
I lost it when i didnt install the extended rom.
somebody indicated that one of the extended rom files installed it. so i went through individually and installed them. didnt fix it.
had to hard reset, and allow the full extended rom to install, and suddenly it came back.
i even tried the .cab file that was issued by O2 for the first rom and for other devices, which worked in the original rom, but not in this one.
sorry, not much help, only a hard reset and full extended rom fixed it for me. the full extended rom isnt a problem for me with this rom as it is so much faster.
hmmm
must be a soloution dont really fancy reflashing or hard reset again.
Which install did you do to get it corp 0506 personnel or basic?
sorry mate, jasjar imate doesn't have it, only o2 has bloatware.
try searching for 0506 in the universal forums, it should help.
suggest basic at a guess.
kiwi23 said:
meepatme said:
Hi upgraded to the new o2 rom. smashing fast as hell no issues all good.....
Help then its all good from here :S
Click to expand...
Click to collapse
I also miss a cab. file. If anyone has the missing cab. file, please...
Anita
Click to expand...
Click to collapse
try thiis
hi experts here,
when i go to Today to disable my touchflo 3D and click OK. It prompt me an error, "A problem has occured with manile.exe." If i go to Today and enable again the Touchflo, the TouchFlo failed to launch, i need to do a softreset , only then the TouchFlow will come back.
What is wrong?Did anyone encouter this error also?
do i need to hardreset my HD?
Do you need/have you done the HTC hotfix?
Kangburra said:
Do you need/have you done the HTC hotfix?
Click to expand...
Click to collapse
yes... i just done the hotfix last night. but, before that, i never tried to disable the touchflo. but, i don think the hotfix will screw up this ,right?
the application i have installed as below:
1. HD Tweak
2. G-alarm
3. Touchpal 3.5
4. Resco explorer 2008
5. .net 3.5 framework
6. ce-star
7. some games
is it possible because of some application above crash with the touchflow? but seems like those application i installed is quite common to hd.
My first suspect would be .net, have you installed the .net config tool, I would try that first.
If not check with other HDTweak users if they can disable and enable Touch Flo.
Kangburra said:
My first suspect would be .net, have you installed the .net config tool, I would try that first.
If not check with other HDTweak users if they can disable and enable Touch Flo.
Click to expand...
Click to collapse
hi, i didn't install any .net config tool in my device, i only the hd tweak and .net framework...crapppppppppppp...
thanks for ur reply..
try it without g-alarm, maybe it helps
Lazy79 said:
try it without g-alarm, maybe it helps
Click to expand...
Click to collapse
thanks for ur reply.
but, i have just done the hard reset, but the problem still persist, same error msg when i disable the touchflo and click on the OK button. after enable the touchflo, but it is still fail to launch. need to do softreset.
i haven install any application or make any tweak when i disable the touchflo..crap....
what i should do now? i already done the hardreset.....
Before you install anything, install the HTC hotfix, see if that solves it.
Does it still happen if you remove the SD card as well?
Kangburra said:
Before you install anything, install the HTC hotfix, see if that solves it.
Click to expand...
Click to collapse
tested...but not working...
rhtizzy said:
Does it still happen if you remove the SD card as well?
Click to expand...
Click to collapse
tested, it is not working as well...
I'd do another hard reset just in case, and if it still doesn't work perhaps upgrading to the newer 1.19ROM might do the trick (and not cost you your warranty)
Edit:
scratch that, upgrading means hard spl and that's non-standard
rhtizzy said:
I'd do another hard reset just in case, and if it still doesn't work perhaps upgrading to the newer 1.19ROM might do the trick (and not cost you your warranty)
Edit:
scratch that, upgrading means hard spl and that's non-standard
Click to expand...
Click to collapse
i have done 2 or 3 tiimes hard reset, but still the same.
they is no new official 1.19 ROM yet,right?
check this http://wiki.xda-developers.com/index.php?pagename=HTC_Blackstone_Ship_exe
alexwai said:
hi experts here,
when i go to Today to disable my touchflo 3D and click OK. It prompt me an error, "A problem has occured with manile.exe." If i go to Today and enable again the Touchflo, the TouchFlo failed to launch, i need to do a softreset , only then the TouchFlow will come back.
What is wrong?Did anyone encouter this error also?
do i need to hardreset my HD?
Click to expand...
Click to collapse
Alex, what's the version of your ROM? May be those with the same ROM version as yours could do a test and see if that also happen to theirs. Your problem could not be produced in my device.
eaglesteve said:
Alex, what's the version of your ROM? May be those with the same ROM version as yours could do a test and see if that also happen to theirs. Your problem could not be produced in my device.
Click to expand...
Click to collapse
hi eaglesteve,
my ROM is v1.18.723.2, what about yours?
any one got the solution already?
alexwai said:
hi eaglesteve,
my ROM is v1.18.723.2, what about yours?
any one got the solution already?
Click to expand...
Click to collapse
Mine stock ROM was a 1.14x, but now I'm trying out a cooked ROM with v.19.831.0.
Wonder if other V.1.18.723.2 users are having same problem as yours. Anyone?
eaglesteve said:
Mine stock ROM was a 1.14x, but now I'm trying out a cooked ROM with v.19.831.0.
Wonder if other V.1.18.723.2 users are having same problem as yours. Anyone?
Click to expand...
Click to collapse
after flash to the cooked ROM, the warranty will be voided ,right? u flash to the cooked ROM already?
alexwai said:
after flash to the cooked ROM, the warranty will be voided ,right? u flash to the cooked ROM already?
Click to expand...
Click to collapse
There is a way to revert back to the original. If you don't try, you will never know which ROM is better, will you?
eaglesteve said:
There is a way to revert back to the original. If you don't try, you will never know which ROM is better, will you?
Click to expand...
Click to collapse
yes, i heard that some cooked do much better than the official ROM.
can u teach me or guide me how to flash and revert back to the original one?
i am new to pda, never try this before...
Has anyone else found the messaging app to be extremly buggy? I have the stock ATT rom and haven't made any major mods to it. It's constantly freezing, the text input field is always hidden, etc. Is there a fix somewhere? At this point I'm even willing to pay for an app, but I can't find any. SMS chat doesnt work with 6.5.
Please and thanks for any help!
---
Thanks! If that works, you will be me hero!
will this work for TMO custom ROM?
thanks in advance
gplock said:
thanks in advance
Click to expand...
Click to collapse
I'm inexperienced with custom ROMs, but I think its a 50/50 chance. Give it a shot and if it doesn't work you can simply unistall it. Everything will be like before. That's the beauty of CABs.
no luck
not compatible with system.
gplock said:
not compatible with system.
Click to expand...
Click to collapse
did you get the error before installation? if so, my guess is htc put in a check to see what rom ur running so the fix cant install on another device. maybe a good dev here can decompile the cab and remove the check/block.
cannot d/l from htc site....
Just got around to installing this. My messaging app wasn't giving me much trouble prior to now, so i just installed it. It froze right when I opened the first message and backed out. Just tried again and it froze again. Way to go HTC.
gplock said:
not compatible with system.
Click to expand...
Click to collapse
Im just looking at the actual file. I was under the impression that it was a cab. my mistake.
PPC Insanity said:
cannot d/l from htc site....
Click to expand...
Click to collapse
I added it to this post if you can't d/l from htc, but I didn't have any problem downloading
Hi
I have searched through several HDWall threads, but have not yet found a manual or installation instructions anyway (even googling).
I cannot get either 0.27b or 0.28 to install on my laptop. HDWalls installed on my TP2 fine.
Can anyone direct me to an original install thread or a manual or similar to help me please.
What am I doing wrong?
I am using winXP and a TP2 with win6.5.
Cheers
grymcent said:
Hi
I have searched through several HDWall threads, but have not yet found a manual or installation instructions anyway (even googling).
I cannot get either 0.27b or 0.28 to install on my laptop. HDWalls installed on my TP2 fine.
Can anyone direct me to an original install thread or a manual or similar to help me please.
What am I doing wrong?
I am using winXP and a TP2 with win6.5.
Cheers
Click to expand...
Click to collapse
Honestly, the only 'instructions' are what you'll find in the original app thread for HDW (this one), both in the first post and throughout the thread.
We'll need a little more detail to be able to help, what error(s) do you get when you try to run HDWalls? There's no real install needed, you just have to extract the folder in the zip file to your desktop or wherever you want it, and run the "HDWall" executable inside.
Thanks for the link to original thread.
When I tried to run/install HDwall nothing happened at all, but now reading the thread I have discovered that I was missing several pre-requisites. Sorted that and now it runs.
Thanks, Now I just have to figure out using it.
Feel free to lock or delete this thread.
grymcent said:
Thanks for the link to original thread.
When I tried to run/install HDwall nothing happened at all, but now reading the thread I have discovered that I was missing several pre-requisites. Sorted that and now it runs.
Thanks, Now I just have to figure out using it.
Feel free to lock or delete this thread.
Click to expand...
Click to collapse
Great, I'm glad it's working. I'm guessing you just needed CF 3.5 on your PC?
If you need any more of a hand with HDW, PM me and I'll help however I can.
i am also have a same problem....
sandip_in said:
i am also have a same problem....
Click to expand...
Click to collapse
Hi sandip...can you give a little more detail about exactly what issue you're having?