Related
I can't install new ROM.
WinMo ROM:
- I can't use bootloader, because it is still stop at 0%, and than after a few minutes disconnect the connection.
- When I try to rename nbh file to leoimg.nbh and copy to root of storage card, it is write out "Loading..." and thats all.
Android ROM: I have magldr 1.11 and hspl 2.08, select from magldr menu that Flashermode, than start nand rom install, but it is just still don't work.
When I try to install WinPhone7 with flasher mode, it is perfectly works, but don't boot after rom flasher.
Why I can't install new rom?
PLEASE HELP ME, because I can't use my phone now!
try to run task 29 from bootloader:
step 1: phone off: hold down volume down button and then shortly press the power button: the bootloader coloured screen appairs
step 2: connect usb cable (usb should appear on the screen)
step 3: run taks 29 with a radio rom (this can be any radio)
step 4: when phone resets hold down volume down button again you will come into bootloader again and then flash a new (android nand or winmo rom (so go into bootloader first)
The phone is totally empty after task29, so before flashing a nand android rom you will have to install magldr again
This should solve your problem, I hope
I't is not working. I did it yesterday.
It's looks like working, than still stay 0%.
I can't use bootloader with success
slk-A4 said:
try to run task 29 from bootloader:
step 1: phone off: hold down volume down button and then shortly press the power button: the bootloader coloured screen appairs
step 2: connect usb cable (usb should appear on the screen)
step 3: run taks 29 with a radio rom (this can be any radio)
step 4: when phone resets hold down volume down button again you will come into bootloader again and then flash a new (android nand or winmo rom (so go into bootloader first)
The phone is totally empty after task29, so before flashing a nand android rom you will have to install magldr again
This should solve your problem, I hope
Click to expand...
Click to collapse
When I use bootloader allways stop at 0% and still 0% until disconnect.
Other way? I can't use from SD card root too...(leoimg.nbh) because it's stop loading display (like the other way 0%)...
WM6.5 on my HD2 (from T-Mobile europe) has finally bothered me enough to decide to change the rom entirely, to android (NAND). I saw the instructions/video tutorial by techburrow (including the magldr v 1.11) and thought that it wouldn't give me too much troubles.
Before starting, I checked my ROM to see if it was recent enough. I as well installed hspl v 2.08 (as shown after taking battery out/in and using volume down + startbutton, in the rgbw screen).
After that I (think I) successfully installed MAGLDR v 1.11. It showed the comment that my phone was now "hacked".
I then went on to the most important step in the process, actually loading android. In the instructions for DFT_Android is states that:
" For installation you need enter MAGLDR (hold power button during boot)"
I tried getting into bootloader by holding the power button, I tried pressing it once and then holding it. Neither worked, both ended up with the HTC logo screen.
All I can do now is choose between getting the HTC logo and the rgbw screen showing hspl 2.08.
Hard reset also doesn't work, probably because MAGLDR deleted the original rom. Connecting through USB via the rgbw screen doesnt work, the connection is not recognised.
Other thread look similar problem, but haven't helped so far. Only the most recent are about others trying to get the android on NAND with MAGLDR 1.11 and DFT-Android.
HELP? Anybody has any idea on how I can install android any ROM now, how to get into the bootloader, how to use my HD2 again?
Looks like Magldr was not flash into the phone. Reflash magldr.
Sent from my HTC HD2 using XDA App
unfortunately
Thx for the suggestion, xhanay. However, reflashing MAGLDR requires an activesync connection and/or USB connection via HSPL (only way my phone does anything). Cannot get any connection unfortunately. So no reflashing.
Any other suggestions? (reflashing via microSD?)
help!i have the really same problem!thx!
This is what I do:
1. Remove the battery, put it back
2. Hold VolDown key pressed while turn on the phone to enter Bootloader (tricolored screen)
3. Connect it to PC and wait for connection to change to USB
4. Flash radio 2.15.50.14
5. Hold VolDown key pressed after reboot to enter bootloader again.
6. Flash MAGLDR
7. Reboot
8. Hold Power button pressed > Select USB flasher ...
....and flash Android/Windows 7.
If USB connection is not recognized I suggest flashing a stock ROM using SD card.
See instructions here, chapter 3 - Flashing Via MicroSD Card
could just work
Thank you for the quick response. Hopefully I will make it all the way to step 8+ (with android and all apps coming along with it). Otherwise using the stock rom should help. Thx for the link.
Will let you know if it works.
Also post in the right section in the future
All worked. I had to reflash a custom ROM through the rgbw screen (apparently a custom ROM did synchronise via USB even though activesync didnt show anything). Then I reinstalled MAGLDR (which immediately sent me through to the bootlader screen). After I had some issues loading android (had to tag USB on in Activesync connection settings, make the connection, the tag USB off in the connection settings)... Now Android is running as I hoped it would. Great work and thanx to all that helped.
ps: Will try to use the right section next time. No promises that it will then be the right one however.
I have the same problem and tried this only to be sent back into magdlr where it just scrolls up and down with the volume key held down.
Any suggestions much appreciated.
dixieuk101 said:
I have the same problem and tried this only to be sent back into magdlr where it just scrolls up and down with the volume key held down.
Any suggestions much appreciated.
Click to expand...
Click to collapse
you could try .... than just plug-it in using activesync and run HSPL3... do not install it...before installing it will put ur phone in bootloader....than exit HSPL3 keep your phone pluged in and just flash wtever....radio,rom...etc....
OR
Press together VOLUME DOWN - DO NOT LET GO! EVER TILL IN BOOTLOADER & RESET RED BUTTON - under batt. metal cover -
after few seconds the tri-coloured screen will appear
load the hard SPL than magledr than rom it works 100%
Same Problem!!!
Hey i have the same problem. Recently I bought this phone off of craigslist. The phone goes to the DFT screen and its on aMAGDLR v1.11. I tried to reset it but it doesnt go to the multi colored screen. I bought a new micro sd but that didnt work. It also cant connect to my computer. There isnt wrong with the charging port because the light goes on when its connected. PLEASE HELP?! I cant go into bloatloader. Is it bricked?
Hi,
I had used HD2ToolKit4.2.0.1.zip and use Wipe option given in the bottom left.
Regards
my volume key not work and now i cant use the bootloader,please
hey anybody here??????????????
now what is soluton for this bootloader nogo
stucked between magldr and dft screen
pls help
now what is soluton for this bootloader nogo
stucked between magldr and dft screen
pls help
Click to expand...
Click to collapse
did you do this with right order?
http://forum.xda-developers.com/showpost.php?p=27057672&postcount=127
Guys I hagve been reading this site for 2 days and am still very very confused as to actually move forward.
Been following http://forum.xda-developers.com/showthread.php?t=945427
Step by step even though there is no explaination as to why I do things And everytime I am thinking "do they mean i do this now???"
I mean a tutuorial for noobs should tell me this stuff????
So I got to here:
From the guide
5. install maglard 1.13 http://forum.xda-developers.com/showthread.php?t=893618
Run romupdateutility.exe as an admin and install
Now my phone not getting past HTC splash screen.
No numbers showing radio version or anything.
PLEASE - I am willing to take this step by step.., what is the next step I should take to get my phone working with a Android rom?
I thanks you in advance for any assitance. I am probably too frustrated to help myslef at this point. I have loaded custom firmwares on my iphones but this HTC process is doing my head in and the guides and youtube vids are not helping.
THE ONLY reason I am trying a new rom is I have a Telstra HD2 and not a Telstra sim. It seemed to want to use Telstra for data, and I was advised the easiest (ha!0 way to do this is get a cooked rom and load it.
Thanks for your help.
AB
HTC_Pain said:
Guys I hagve been reading this site for 2 days and am still very very confused as to actually move forward.
Been following http://forum.xda-developers.com/showthread.php?t=945427
Step by step even though there is no explaination as to why I do things And everytime I am thinking "do they mean i do this now???"
I mean a tutuorial for noobs should tell me this stuff????
So I got to here:
From the guide
5. install maglard 1.13 http://forum.xda-developers.com/showthread.php?t=893618
Run romupdateutility.exe as an admin and install
Now my phone not getting past HTC splash screen.
No numbers showing radio version or anything.
PLEASE - I am willing to take this step by step.., what is the next step I should take to get my phone working with a Android rom?
I thanks you in advance for any assitance. I am probably too frustrated to help myslef at this point. I have loaded custom firmwares on my iphones but this HTC process is doing my head in and the guides and youtube vids are not helping.
THE ONLY reason I am trying a new rom is I have a Telstra HD2 and not a Telstra sim. It seemed to want to use Telstra for data, and I was advised the easiest (ha!0 way to do this is get a cooked rom and load it.
Thanks for your help.
AB
Click to expand...
Click to collapse
I would recommend getting the hd2 tool kit of my signature and download your winmo version of htc site, run task 29 on the tool kit then flash win mo, then start again, SORRY if i have answered to you incorrect kind of in rush so i quick read
HTC_Pain said:
Guys I hagve been reading this site for 2 days and am still very very confused as to actually move forward.
Been following http://forum.xda-developers.com/showthread.php?t=945427
Step by step even though there is no explaination as to why I do things And everytime I am thinking "do they mean i do this now???"
I mean a tutuorial for noobs should tell me this stuff????
So I got to here:
From the guide
5. install maglard 1.13 http://forum.xda-developers.com/showthread.php?t=893618
Run romupdateutility.exe as an admin and install
Now my phone not getting past HTC splash screen.
No numbers showing radio version or anything.
PLEASE - I am willing to take this step by step.., what is the next step I should take to get my phone working with a Android rom?
I thanks you in advance for any assitance. I am probably too frustrated to help myslef at this point. I have loaded custom firmwares on my iphones but this HTC process is doing my head in and the guides and youtube vids are not helping.
THE ONLY reason I am trying a new rom is I have a Telstra HD2 and not a Telstra sim. It seemed to want to use Telstra for data, and I was advised the easiest (ha!0 way to do this is get a cooked rom and load it.
Thanks for your help.
AB
Click to expand...
Click to collapse
If the last step you took was to install magldr, of course your phone won´t boot, since you didn´t flash any build the phone could run on?
Or have i missed something?
Normaly, if you are setting things up to install some android build you have to run a file called daf.exe (only as an example, i´ve been flashing just one particular build with magldr), that daf.exe will partition the nand according to the needs of the build, that particular daf.exe was delivered with.
Now you have to enter "ad recovery" from the magldr menu (power on and keep power button pushed) and from there you would have to install from zip.
Have you been that far taking all the necessary steps? Leaving out the nand partitioning with the daf.exe is a common mistake i have read often about.
Thanks so much for those posts.
I think I have damaged the phone now trying things ..!
OK it has been 3 days and nights of trying stuff, let me try and summarise where I am at.
I managed to get magldr working, and used the menus to browse to a ZIP rom on the SD card and flashed it.
It was stuck in a continuous boot loop - see Andriod splash for about 10 secs, then reboot, repeats...
The best way forward from what I could read in threads was to just re install a stock ROM and start again, and try another cooked ROM. It was during this process that it failed, it now seems to have NO firmware on it, as I do not get any radio version numbers or anything.
NOW when I boot the phone - I cannot get magldr. It just goes to the white HTC splash screen and hangs forever.
Everything I try to flash now is stuck at 0% and never completed.
THE ONLY thing I seem to be able to install / get to talk to the HD2 is HSPL4, which when completed gives me the "WE HACKED IT" message. Apart from that I cannot install radios, roms or MAGLDR.
However the MAGLDR flash process DOES show 100% completion, I just cant get it to load by holding power button. As I mentioned above, I DID have MAGLDR working previously but wont play ball now.
Thanks for any tips, I think I need to not look at it for a while.
UPDATE = for some reason, it is now accepting the stock Telstra ROM flash process...?
STILL NO MAGICLDR so I cant load my cooked ROMS.. any suggestions are hugely appreciated.
AB
HTC_Pain said:
Thanks so much for those posts.
I think I have damaged the phone now trying things ..!
OK it has been 3 days and nights of trying stuff, let me try and summarise where I am at.
I managed to get magldr working, and used the menus to browse to a ZIP rom on the SD card and flashed it.
It was stuck in a continuous boot loop - see Andriod splash for about 10 secs, then reboot, repeats...
The best way forward from what I could read in threads was to just re install a stock ROM and start again, and try another cooked ROM. It was during this process that it failed, it now seems to have NO firmware on it, as I do not get any radio version numbers or anything.
NOW when I boot the phone - I cannot get magldr. It just goes to the white HTC splash screen and hangs forever.
Everything I try to flash now is stuck at 0% and never completed.
THE ONLY thing I seem to be able to install / get to talk to the HD2 is HSPL4, which when completed gives me the "WE HACKED IT" message. Apart from that I cannot install radios, roms or MAGLDR.
However the MAGLDR flash process DOES show 100% completion, I just cant get it to load by holding power button. As I mentioned above, I DID have MAGLDR working previously but wont play ball now.
Thanks for any tips, I think I need to not look at it for a while.
UPDATE = for some reason, it is now accepting the stock Telstra ROM flash process...?
STILL NO MAGICLDR so I cant load my cooked ROMS.. any suggestions are hugely appreciated.
AB
Click to expand...
Click to collapse
Hi,
I would suggest KEVIN134's TOOLKIT (Don't forget to thank him)
Read the thread carefully and follow his step by step guide for beginners.
Try to install one of his suggested ROMS.You can always change it at a later date.
At least you will have something.
OK thanks. I have now gotten original Telstra ROM back. I hope to start fresh in the morning and follow your link to the letter. I hope it is a good guide for beginners, as so many other seem to claim that and have no plain english steps or screenshots. I truly appreciate your post, cheers.
Tried that app, it cannot find any of the apps it tries to install/use? Maybe I need sleep.
HTC_Pain said:
THE ONLY thing I seem to be able to install / get to talk to the HD2 is HSPL4, which when completed gives me the "WE HACKED IT" message. Apart from that I cannot install radios, roms or MAGLDR.
Click to expand...
Click to collapse
You are talking about HSPL4, i would suggest you use HSPL3 (http://forum.xda-developers.com/showpost.php?p=6894936&postcount=2).
You know how to flash back to stock winmo? Hold the volume down button while turning on the phone to enter the boot loader, connect with USB and wait for confirmation on the screen below (serial changes to usb), and then flash the stock Rom.
I never used the toolkits, never needed them so i would propose the following steps for you, to start from scratch (so we can take it step by step together, i think we need to have the same base to be able to make a statement about your phone).
After flashing WinMo Stock Rom, install HSPL3 (the one in the linke above, HSPL3_PKG.exe).
Then use task29 to flash the 2.15.50.14 radio.
After that install MAGLDR113 and then, if i were you , i would install coredroid v1.6. (http://hotfile.com/dl/113345298/fb3f69b/HD2_Core_Droid_Desire_HD_V1.6_Release_Version.rar.html)
To do that, enter the magldr menu by keeping the power button pressed while turning on your phone, enter USB Flasher from the menu and after connection has been established, run the DAF.exe which will partition the NAND for you.
After that reboot into cwm, enter the usb mass storage option, copy the zip file on the sd card and from there install from zip.
This procedure has worked every single time for me, maybe it will for you, too?
Cheech1976 said:
After flashing WinMo Stock Rom, install HSPL3 (the one in the linke above, HSPL3_PKG.exe).
Then use task29 to flash the 2.15.50.14 radio
Click to expand...
Click to collapse
Thanks for offering to walk me through this, you have saved my sanity.
OK I am back to stock WinMo Rom.
I have HSPL3 installed (not 4, 3 as you say).
"Then use task29 to flash the 2.15.50.14 radio"
You might have to explain this to my feeble mind. I thought task29 deleted all data? How would it upgrade the radio?
Thanks again
AB
HTC_Pain said:
Thanks for offering to walk me through this, you have saved my sanity.
OK I am back to stock WinMo Rom.
I have HSPL3 installed (not 4, 3 as you say).
"Then use task29 to flash the 2.15.50.14 radio"
You might have to explain this to my feeble mind. I thought task29 deleted all data? How would it upgrade the radio?
Thanks again
AB
Click to expand...
Click to collapse
Task 29 can be used to flash the radio as well, so these two steps can be taken as one.
All you would have to do is copy the radio in the same directory as the rest (task29) and rename it to RUU_signed.nbh, so this procedure will install the new radio as well.
Take that one from here:
http://forum.xda-developers.com/showthread.php?t=1018427
Thanks Cheech! OK gotta sleep but trying this 1st thing tomorrow, will report.
HTC_Pain said:
Thanks Cheech! OK gotta sleep but trying this 1st thing tomorrow, will report.
Click to expand...
Click to collapse
All right, have a good nights rest
Sent from my HTC HD2 using XDA Premium App
Thanks for that extra step explained...
I have read the thread, and downloaded the ZIP that was linked that has task 29 and the radio together. About to do it now.
OK that has completed, and it has rebooted, and now shows the white screen with HTC green logo, and stays there. This right?
I think it is.. as I have now flashed MAGLDR 1.13. Am now downloading the rom you suggested
UPDATE: I am done.. your suggested rom is installed and working!!
I am so relieved.
FYI here are the last steps I took.
* Used the Task 29 and radio update instructions from the link.
Once that was done it was a white screen with HTC logo - I then rebooted into HSPL bootloader on HTC device.
* Flashed magldr 1.13 - was very quick.
THESE NEXT STEPS ARE FROM THE QWORD DOC INCLUDED IN THE RAR FILE FROM THE SUGGESTE ROM - great stuff this doco.
1. After downloading HD2 CoreDroid DHD V*.*.rar, extract it to a folder on your PC of your choice.
2. Turn your unplugged HD2 on and boot into the MAGLDR 1.13 menu by holding down the power (right) button after initial vibration.
3. Using volume down move to number 5. USB Flasher
4. Push call button (left) and enter the USB flasher screen. You will see “USB Flasher mode Wait USB…”
5. Plug USB cable into the HD2, you should now see “USB Flasher mode Wait USB… USB
6. Go to the extracted HD2 CoreDroid DHD *.* folder on PC, and execute the DAF.exe. On newer windows buttons, right click and run as administrator.
7. Press next twice, and the installation will begin.
8. When finished press finish.
9. After the installation your HD2 will reboot into MAGLDR 1.13 menu.
10. Using the volume down button move to down to number 8. AD Recovery and press call button (left).
11. Your unplugged HD2 will now boot into the ClockworkMod Recovery menu.
12. IF YOU DID NOT BACKUP YOU SDCARD DATA DO IT BEFORE YOU PROCEED IT WILL BE FORMATED.
13. With volume down button advance to the advanced menu press left button.
14. Advance down to Partition SD Card menu.
15. Select minimum (512m) maximum (1024m). Your choice which one to use. Recommended is the 1024m, then press call button (left).
16. Select the 0m with the call button (left).
17. Wait until the process is finished.
18. Do not reboot! Stay in the ClockworkMod Recovery.
19. When finished “done” will appear in the lower half of the screen.
20. Press right button.
21. Using Volume down button move to “-mounts and storage”
22. Press end button (right).
23. Move down to mount USB storage
24. Press call button (left).
25. A new drive should be mounted to your PC.
26. Navigate to MyComputer and open the new drive (ex: F: E: G: etc…)
27. Go to the HD2_Core_Droid_Desire_HD_V1.12 folder
28. Copy the HD2_Core_DroidDesire_HD_V1.12.zip to the HD2 sd card root (the new mounted drive ex: F.
29. When finished copying and unmounts is selected, press the call button (left).
30. Press the back button
31. Move down to “-install zip from sdcard”, and press call button (left).
32. Move down to “-choose zip from sdcard”, and press call button (left).
33. Select the CoreDroid_V*.*.zip, press left button
34. Wait till it´s finish flashing, you will then see a flashing “CoreDroid”. Flash options will reappear.
35. Push end button (right).
36. Select “Reboot system now”
37. Let HD2 reboot giving it time. Wait at least +/- 10 minutes.
Once the phone has booted, let the syncs take place, wait for about 20 minutes, then reboot.
Totally worked for me. i thought I had bricked, I though no roms would hold.... this was done in an hour!
Cheech, you are the man thanks so much.
HTC_Pain said:
UPDATE: I am done.. your suggested rom is installed and working!!
Click to expand...
Click to collapse
Very cool Congratulations
Cheech1976 said:
Very cool Congratulations
Click to expand...
Click to collapse
Cheech your help was awesome, it has been your posts that meant I have had a phone for the past week.
Now not wanting to sound ungrateful, but I have to report that ROM you suggested runs really bad on my HD2. Very laggy, even to unlock the screen will hang 2 time out of 3. Oh well, I am starting to learn the same rom on the same hardware can act very differently.. sad face.
If I had to state the function I HAVE to have in my ROM it would be obviously good phone and text ability, music player with resume and bluetooth, a browser, email client, and something to play videos.
Is there a very lightweight ROM that will give me the above functions but maybe run a little better on my HTC HD2 (and are as easy to install as the one I have already tried)? Thanks heaps for any tips.
I jumped in, and using your great direction from before have a new rom on my HD2...
NexusHD2-Gingerbread_V2.8_NAND_(Android-2.3.4)_update
Wow, so much faster and snappier. Love the way Google resynced my apps and some settings!!
Gonna play with this for another few days.
EDIT: seems there is always something.. this ROM not finding my Wireless network. Finds all the ones around me but just wont find mine - even with apps to manage it. My kingdom for a lean ROM for my HD2!!!
Edit 2: Turns out Android 2.3 sets the WiFi channels to end at 11.
Our wireless was higher than that.
Advanced settings and increasing the WIFI channels to the full 14, saw my network straight away.
Took quite a bit of Googling to figure that one out.
Please delete.
logo problem
LaneyEFC said:
I would recommend getting the hd2 tool kit of my signature and download your winmo version of htc site, run task 29 on the tool kit then flash win mo, then start again, SORRY if i have answered to you incorrect kind of in rush so i quick read
Click to expand...
Click to collapse
dude help me my htc stuck on htc logo and do not boot
So i was trying to put android with easy android and it seemed like it worked, it said we hacked it at the end. Now the phone doesnt boot up. I even tried hard resetting any help? Do i need to flash a radio? If so how and which radio?
Full filename of anything you flashed plus tmous or regular? What does "wont boot up" mean?
Details details details.
Im tmobile US. Theres an application that does an automated process. It's called Easy Android. I dont have the link for the post but it's hear on xda. When the phone boots up it just shows the T-mobile logo.
Please tell me if you need more info.
oh right, well in taht case its almost certainly either the wrong hspl or the wrong radio.
Magldr wont start unless BOTH spl is 2.08.hspl and radio is 2.07.50 or higher , but since you have a tmous the radio must be OK, so it must be the spl
enter bootloader (phone off, hold hold keep holding voldown, tap and release power, hold voldown till tri colour screen appears) what does spl line say?
Hey
Its 2.08 HSPL
BTW i appreciate the help
in that case i'd be heading back to a stock rom, get it back to as-new and start over.
Grab either the 2.13 or 3.14 TMOUS roms and flash via sd card. that will put it back to as new, then apply 2.08.hspl - magldr - cwm - rom.(get the toolkit)
I wont have a problem finding the rom, but i just need to know how do you flash the rom, do you just enter bootloader and it auto installs?
Thanks
get the phone into bootloader mode, and make sure the computer detects the phone before you start the flashing process (i.e. running the RUU).
If the rom comes in an exe file, rename it and make the file extension .zip
Then go into the .zip file and remove the file which has the file extension .nbh
Rename this file to LEOIMG.nbh
Put this file at the root of a 4Gb or smaller sd card
Put the card into your phone and boot into bootloader (hold vol down button while booting)
Should find and flash the rom all by its self, might ask you to press a certain button to confirm, been a long time, I can't remember for sure if you have to press a confirmation button
Wait for it top finish
Make sure you have 50% or greater battery before you flash
MAKE SURE you have the correct stock rom for your phone. There are different stock roms for different HD2's depending on what model HD2 you have. Flash the wrong one you could be screwed for good
Okay, running RUU while in bootloader worked perfect.
Got the ruu straight from tmobile.
Windows 7 auto installed bootloader drivers for me.
which rom should i use?? and guide please
thank u
i am new so pls help
k first i recommend you use hyperdroid, typhoon, or if you want a sense rom then energy rom...i use hyperdroid(my sig) roms link:http://forum.xda-developers.com/forumdisplay.php?f=928
read a tutorial first!
u need: hspl 4 to unlock phone, 2.15.50 radio, magdlr 1.13, and cwm recovery and the rom you want to run.
1. put your phone in bootloader mode ( while phone is powered down hold volume down and power button) and it will take you to a tri colour screen.
2.with your phone plugged in, it will look and search for the htc drivers and your phone will say usb on the bottom, and when it says that, run the HSPL.exe file you downloaded. this will hack your phone.
3. as soon as your phone reboots hold the volume down and power button to put it back in the tri colour screen. now install the 2.15. radio you downloaded by running the custom ruu, and this will install it for you.
4. now once again, once it completes put your phone into tri coulour screen again, and run magdlr. This will install magdlr for you as well, the bootloader that will replace the original. this is whats going to get you into nand android, or wp7 etc.
5. once thats done phone will reboot, and now it will reboot into magdlr. from here on, you will have to put your phone into usb flasher mode. the phone will install other usb drivers once you do that.
6. once thats done, while on usb flasher mode, install the recovery you downloaded, and using the dft installer, will install the recovery. follow the instructions ins the recovery flasher.
7. when thats down, in magdlr go into ad recovery, and this will put you into the Android recovery.
8. using your volume rocker, go down to mounts/storage, and mount usb/storage, and transfer your rom over to ur sd card.
9. unmount and go into "install zip from sd card." and choose the rom you just transferred. this will take a few minutes, just let it sit till it finishes.
10. once complete go into reboot phone. enjoy
Notes: on first boot, usually it will take a litle longer just sit and be paitent.
Make sure you download the rom that fits your phone ( tmobile version, or EU)
if i helped just hit the thanks button and u can pm me if u have any prob
thank you i will try that later
Nice elaboration walidhazem
Imo, don't go for sense roms, because the newer ones (3.0+) eat up your RAM and the phone become unusable with 100Mb Idle...