Hi,
my daughter updates from settings/updates their previously rooted My3G T-Mobile phone and now it is a endless booting loop.
Recovery is still there but can't select the options, i can navigate through all four but phone buttons do not execute them.
I can access fastboot, also Hboot and have a Gold Card.
So, i read every thread and tested many things but i need guidance because i don't want to do further damage.
Here it's phone current state:
PVT32B SHIP S-ON G
HBOOT-1.33.0013 (SAPP30000)
CPLD10
RADIO-2.22.28.25
Oct 21 2009, 22:33:27
fastboot getvar version-main
version-main: 2.10.531.4
Thanks in advance for helping on this, my daughter really miss their phone.
Have you tried flashing the stock Cupcake update or a RUU? That's how I get out of boot loops. And they are automatically picked up by fastboot.
Sent from my SappFYRE using XDA App
Hi TheBlade,
no, not tried.
Have you a link or post with procedure to complete that task?
I can search but want to be sure on what to install.
Regards.
Sorry for taking so long to respond. Did you buy the phone in the US? I can see that you have a T-Mobile rom flashed. Is this a mytouch 1.2 (does it have a headset jack)? I can help you better if I know that.
Sent from my Sapphire/dream using XDA App
Hi TheBlade,
no complains, my daughter can wait
Yes, it's a T-Mobile US phoneut doesn't have a 3.5mm jack, just the usb like HTC connector.
The box said: MyTouch 3G
Thanks!
Diego
I believe this link: http://android.d3xt3r01.tk/cyanogen/magic/nbh/coc10/SAPPIMG.nbh
will work. Download and put it on the microsd card that came with the phone (don't put it inside a folder). Turn on the phone to the bootloader, and it should detect the file. It should ask if you want to apply the update. Say yes, and then you will be back to stock. Let me know how it goes.
Sent from my Sapphire/dream using XDA App
Thanks TheBlade.
Performed the suggested process and got "Main Version is older!" Update Fail! message.
Anything else to try?
At this point I believe putting the file on the goldcard would work. It seems as though the update was partially completed, and so it refuses to let you flash an older rom. The goldcard forces it to flash the rom, so put put the file on the goldcard, and try to flash again.
Hoping it works!
Sent from my Sapphire/dream using XDA App
Thanks The Blade.
Well, the funny thing is that i use the Goldcard that help to root/ing SPL this phone before. Anyway, i'll try to complete the whole Goldcard process again and see if it works.
Hopefully it works! Ill try and see if there are any other options.
Sent from my Sapphire/dream using XDA App
Related
,...........
try using fastboot to reload rom
cbmm said:
try using fastboot to reload rom
Click to expand...
Click to collapse
http://wiki.cyanogenmod.com/index.php?title=Fastboot
cbmm said:
http://wiki.cyanogenmod.com/index.php?title=Fastboot
Click to expand...
Click to collapse
you will also need to install correct drivers on your pc, install pdanet on your desktop, that should do it
In order to use fastboot to push any commands the phone must have an ENG. Hboot. When you boot into bootloader what does it say on the top line on the page with the skateboarding andriods on the bottom? If it says VISION PVT SHIP S-ON your pretty much stuck. The phone is a paper weight. HTC is probably the only one who can fix this. It must say VISION PVT ENG S-OFF or at least VISION PVT SHIP S-OFF if there is any chance for fixing it. The only other hopes in fixing it is to flasch the stock PC10IMG to the phone in bootloader but this will only work if the phone did NOT have the OTA 1.22 rom update applyed to it. There is no way to tell this unless you try it out, but if you do have S-OFF do not try this because it will turn S back on and your screwed. If it says S-Off there is a cooked version of the PC10IMG by hot_hands that you can flash that will keep your S-Off and give you root access plus it will flash the ENG Hboot for you, I have a copy of this at home and can post it later for you, if you have S-Off.
Sent from my HTC Vision using XDA App
.............
.............
phone is locked. i would load the original rom with fastboot
I think you can download a pc10.zip and flash it. Worth a try
cbmm said:
phone is locked. i would load the original rom with fastboot
Click to expand...
Click to collapse
He can't use fastboot he doesn't have an ENG. HBoot he has the SHIP Hboot.
He can try the original stock 1.19 PC10IMG thru bootloader, that is his only option.
Sent from my HTC Vision using XDA App
.............
Erickimdmd said:
would someone mind linking the above mentioned file? and do i do it using a microsd?
sorry if i sound like a newbie... i am
thanks guys
Click to expand...
Click to collapse
http://www.megaupload.com/?d=20Y1ELB0
here's what i tried.
.............
Erickimdmd said:
ok so i found what i think was the 1.19 stock rom.
it was 123 MB (129,303,247 bytes) in size
i renamed it PC10IMG.zip and copied on microsd. when bootloader loads, this following screen flashes and nothing else happens, goes back to screen i posted earlier.
Click to expand...
Click to collapse
Did u try the copy i posted ? i have done it with others and have it do the same but this one worked for me
.............
Sometimes it hard to fact the facts but I think your phone is beyond help, at least the help offered here in the forum, I think the only thing that will bring you phone back is HTC or JTAG both of which are not available here. Might call HTC and see if they can do anything for you.
.............
Erickimdmd said:
if no other methods can be suggested i have one final question:
how much is a bricked G2 worth. heh.
Click to expand...
Click to collapse
For parts? I'm just guessing, $100.00, but you definitely dont want to pass it onto someone else with false hopes of somehow restoring it to working order. Bad Karma.
Are you sure you copied it to the root of your sdcard? With the right file name? It seems as if it isn't picking it up at all.
Sent from my HTC Vision using Tapatalk
.............
You could give this method a try. Follow the instructions carefully. The links to the files you'll need are there too.
http://www.talkandroid.com/20232-tutorial-manually-update-t-mobile-g2-remove-google-goggles/
I have an issue I have been trying to figure out on my own. I have scoured the interwebs searching for a solution and every time I think I've found one, it ends up being a road-block. I'd like to be able to post a fix for other people in various forums if I can find a way around it. So here's my story...
So a week ago a rooted my phone, I used Universal Androot and the Rom Manager, my phone was perfect with the multi touch, pinch zoom and other goodies...then I got greedy. I started seeing Hero Roms flying around the web, I wanted one. In this process I nearly bricked my phone, so I decided to put a stock rom back on it. My intention was to re-root and just leave cyanogenmod on my phone.
The problem is...dun dun dun, the dreaded Removed SD Card error. Now my SD Card only reads in hboot. Something during the OS loading disables my SDCard. I have been sitting at my computer for almost the last 48 hrs trying to find a way to fix it, because phone is semi-useless without it. Here is what I have tried:
1 fastboot -c board.sapphire disable_sdcard=0;
This gives me an ok and finish status but appears to have done jack once OS is loaded
2 fastboot oem enableqxdm 0;
this is not working because I have the dreaded perfected SPL
3 I have tried the [How-to]Fix Perfected SPL;
all of the SAPPIMGs give me incorrect Model IDs
4 I have tried re-downloading stock ROMs in case it was corrupted, nada.
I have been trying to find a way to flash the SPL without an SDCard and it doesn't seem possible...
Phone Info:
Sapphire PVT 32A Ship S-On G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-2.22.23.02
It's the US MT3G 3.5MM.
I'd like to be able to help other people with this same problem, with credit to the person(s) involved in stomping out this fire.
Thank you to all constructive posts, let us get one step closer to ruling our phones.
Sound like the problem that I had. Different phone (mines a Rogers Magic) but same issue.
I ended up having to install the offical Rogers rom with the RUU.exe and then use the fastboot oem enableqxdm 0 command. Then I could re-root and do what ever I wanted.
My thread is here
Any particular mode the phone should be in for RUU Rom to read it? Sorry for the newbie questions but I really would like to enhance my knowledge.
DO NOT DO THAT!!!!! Where did you get the sappimg to return your phone to stock? What ROM are you currently on?
I got the ROM from Shipped Roms, it's a stock rom. I'D LOVE to be able to flash an SPL without the sdcard so that I could enableqxdm 0 the card reader back into exitence. I am down for trying all options.
The phone is rooted, via a file manager I have access to the system files if that helps at all... is it possible to edit init files and put them back on the phone? would that help?
The thing is, you can't use an RUU like the other guy did to get an engineering SPL loaded, you'll have to use the goldcard method to do that with your phone. As for the sappimg, there's about probably about 30 different images you can get from that thread. Which one did you download specifically? If you didn't get the 2.10.531.4, then you grabbed the wrong one. You can get the right one from here and flash it from hboot. I would try that before going the goldcard route.
DonJuan692006 said:
The thing is, you can't use an RUU like the other guy did to get an engineering SPL loaded, you'll have to use the goldcard method to do that with your phone. As for the sappimg, there's about probably about 30 different images you can get from that thread. Which one did you download specifically? If you didn't get the 2.10.531.4, then you grabbed the wrong one. You can get the right one from here and flash it from hboot. I would try that before going the goldcard route.
Click to expand...
Click to collapse
Have you checked to see if your getting the SD card mount issue from recovery?
Yeah sorry I didn't mean for you to copy what I did as mine is a rogers Magic and things are different for your phone.
I was just indicating how I had to fix my phone.
Hey Don, Yea I got the 2.10.531.4, from S-R.com, its initially how I saved the almost brick, and the stock recovery does give me a E:\cant mount SDCARD.
Part of me thinks the rom ".4" has some kind sdcard block...
And I am unable to get the CID for my phone without the phone reading the sdcard, it's like walking a maze, I get close to what I think is figuring it out, but no luck yet, and I would love to be able to cross post a fix to other forums with people that arent having luck with fixing this issue.
That's easy, your CID is T-MOB010. The ".4" does have an SD card block as I've used it several times in the past. That's the shipped ROM for the myTouch 1.2. I would start by reloading the sappimg.zip from the link I provided. It's probably not going to make a difference, but is about the easiest double-check to do. The other option is to use the "old school" rooting method in my signature to get an engineering SPL loaded and then trying the two fastboot commands you tried before. I imagine the first command appeared to go through but in reality, didn't, similar to trying to run the "fastboot boot" command on a perfected SPL.
Will do. Will report back with results soon
Sent from my T-Mobile myTouch 3G using XDA App
looking at the unlockr's site the CID comes up as a large string of numbers, where does T-MOB010 come into play?
HeroTouched said:
looking at the unlockr's site the CID comes up as a large string of numbers, where does T-MOB010 come into play?
Click to expand...
Click to collapse
There's two different CIDs. The one you get for the goldcard is specific to the SD card. You also have a Customer ID which is particular to the mobile company your phone is locked to. The one I provided is the CustomerID.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
Going to have to borrow buddie's g1, topic on hold until then.
my phone only reads sd in hboot
Sent from my T-Mobile myTouch 3G using XDA App
HeroTouched said:
Going to have to borrow buddie's g1, topic on hold until then.
my phone only reads sd in hboot
Sent from my T-Mobile myTouch 3G using XDA App
Click to expand...
Click to collapse
Cool.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
I owe you a few redbulls Don! Phone is back to original state. And thank you also for dropping some knowledge on me too
Sent from my T-Mobile myTouch 3G using XDA App
No problems dude.
I rooted my Mytouch 3G 1.2 and have routinely upgraded the CM roms as they were released with no problems. I went to unroot the thing so i could sell it on ebay, but ran into problems. Currently it will load into Hboot, but will hang while unzipping system files. It appears to go into Fastboot, but I can't get a computer (fastboot commander or command prompt) to communicate with it. It shows fastboot and changes to Fastboot USB when connected to a computer, but that's all I get. I've tried various drivers and sappimg files. I have read that if it shows any signs of life then it can be saved. I have searched for hours trying to find solutions but haven't made any progress. Current Fastboot screen shows Sapphire RE Unknown 32A Eng S-Off H
HBOOT 1.33.2010
CPLD-13
Radio- 3.22.20.17
Any help would be greatly appreciated.
You need to get AndroidSDK installed. Is the computer detecting the phone? Does anything for the phone show up in Control Panel?
I have AndroidSDK installed on my computer, but adb devices doesn't list anything.
cccentipede said:
I have AndroidSDK installed on my computer, but adb devices doesn't list anything.
Click to expand...
Click to collapse
What about "fastboot devices"?
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
You have the wrong hboot and radio for a 1.2... can you confirm this does have a headphone jack?
Kind Regards,
Kevin
Sent from my T-Mobile myTouch 3G 1.2 using XDA app
kpetrie77 said:
You have the wrong hboot and radio for a 1.2... can you confirm this does have a headphone jack?
Kind Regards,
Kevin
Sent from my T-Mobile myTouch 3G 1.2 using XDA app
Click to expand...
Click to collapse
He flashed the engineering SPL used for the goldcard method and didn't do anything after. Hopefully he'll still be able to get fastboot working so we can get him straightened out.
Sent from my T-Mobile myTouch 3G Slide using Tapatalk
That sounds about right Kevin and DonJuan. I've got a new baby and my attention to detail and directions isn't what it should be right now
I found that part of the problem I was having was with my wretched Vista laptop and a driver issue. When working on my XP desktop I can see the device in fastboot devices. I do have the headphone jack and realized that I do have the wrong radio. I think I'm sort of lost as to where my phone exists right now in the process of unrooting.
Thank you both for your fast replies.
Use the "Old school" rooting guide in my signature starting at Step #4. That will put you back on CM. I would leave it rooted to sell it unless you've got a buyer requesting for it to be stock as you may pull more interest. If your dead set on going back stock, you should be able to stop at Step #9 in the guide, turn the phone off, download this file, rename it to "sappimg.zip", put it on the root of your SD card, with it in the phone, turn it on holding volume down+power, and then follow the instructions on screen.
Awesome, I'm in Amon-Ra's recovery. Can I use it to restore a clockworkmod backup or are the two recovery methods incompatible? I guess part of my question should be whether my phone is technically rooted or unrooted at this point. Could I load a recovery from step nine of your guide and be done with it?
I tried using the stock img that you linked to (because I see stock MyTouch phones on eBay selling more often than rooted ones) but it gave me the Main version is older" message which is what got me started down this road in the first place. At this point, if I could get back to my backed up CM6.1 I would call it good.
P.S. I really appreciate your time and will donate.
If I'm not mistaken both recoveries use the nandroid backup. Just try restoring and see if it'll take. If not then you may just end up having to re-flash it. So what you were actually trying to do is flash the engineering SPL to bypass the version check. You flashed an entire sappimg which changes pretty much everything. Instead you should have used the engineering ZIP that's floating around which you would have flashed from recovery and it would've only changed the SPL.
I got everything back to where I started with your guidance. I guess you were right DonJuan, my CM6.1 MyTouch sold within 30 minutes on ebay for $125. Thanks again.
Sorry for creating new thread if there is some solution available on this. But I have searched everywhere and tried lot of things nothing works
Here is my hboot info
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0007 (SAPP30000)
CPLD-10
RADIO-2.22.23.02
JUL 31 2009, 15:49:25
I had CyanogenMod 6 which became slow so I tried to reboot in recovery while USB was connected it didnt get into recovery mode and after reboot its stuck on CyanogenMod boot logo. When I try home + power it boots without going into recover mode and gets stuck in boot loop of CyanogenMod screen. I kept it on till the battery drained (almost 8 hrs 2-3 times) so dont think its issue with keeping it on for longer time.
So far I have tried all possible spamming.zip and spamming.nbh none of them work either get wrong model ID or update failed. I am not able to log in through ADB. adb devices doesnt show me any devices. But when i try fastboot devices i see my phone. But i can not push anything it says remote not allowed.
I tried goldcard but I cant get to the system files so cant swap the hex digits to create goldcard. I know someone would have a better idea.
Need some help from the experts .. please. Its been more than 2 weeks trying out all possible solutions but no luck.
Can you still boot into the rom you had installed?
Sent from my shad0w's sapphire using XDA Premium App
tvall said:
Can you still boot into the rom you had installed?
Sent from my shad0w's sapphire using XDA Premium App
Click to expand...
Click to collapse
If you mean boot and start the phone no I am not able to do that it gets stuck on cyanogen boot screen. I am able to boot in HBOOT and FASTBOOT though.
Have u tried fastboot flashing a new recovery? Just to see if u lost it somehow then try to boot into it.
Sent from my HTC Magic using XDA App
johnson8cyl said:
Have u tried fastboot flashing a new recovery? Just to see if u lost it somehow then try to boot into it.
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
He has s-on. If he could do that then this would be easy to fix
Sent from my shad0w's sapphire using XDA Premium App
Oh yeah. You're correct....... duh. Can he use someone else's gold card?
Sent from my HTC Magic using XDA App
happened to my mytouch 3g
it happened to me last week like that, the only thing that saves my was run the 1.5 SAPPIMG.nbh so i'm back to stock again then re-do everything allover
danxtian said:
it happened to me last week like that, the only thing that saves my was run the 1.5 SAPPIMG.nbh so i'm back to stock again then re-do everything allover
Click to expand...
Click to collapse
Can you point me to the file? I have used lots of sappimg.nbh so far none worked so dont mind trying this one. Hope thats the solution for me.
johnson8cyl said:
Have u tried fastboot flashing a new recovery? Just to see if u lost it somehow then try to boot into it.
Sent from my HTC Magic using XDA App
Click to expand...
Click to collapse
No it says remote not allowed.
Rambad said:
Can you point me to the file? I have used lots of sappimg.nbh so far none worked so dont mind trying this one. Hope thats the solution for me.
Click to expand...
Click to collapse
for the old mytouch 3g
http://www.megaupload.com/?d=DQWW0Y9N
for mytouch 1.2
http://www.4shared.com/file/E2zhvzIr/SAPPIMG_Sapphire_T-Mobile_US_2.html
i got them from theunlockr website, hope they works for you..
danxtian said:
for the old mytouch 3g
http://www.megaupload.com/?d=DQWW0Y9N
for mytouch 1.2
http://www.4shared.com/file/E2zhvzIr/SAPPIMG_Sapphire_T-Mobile_US_2.html
i got them from theunlockr website, hope they works for you..
Click to expand...
Click to collapse
Tried again I get Main version older for original and model ID incorrect with mytouch 1.2
ooow sorry to hear that, well i guess you will need to get a goldcard..
danxtian said:
ooow sorry to hear that, well i guess you will need to get a goldcard..
Click to expand...
Click to collapse
I am unable to do that because I cant see my device in adb. Is there some way I can send my phone to t-mobile or htc and they can reset to factory setting? I am surprised that there is not a way to just flash rom with factory settings.
do you know anybody that have a HTC phone? i'm pretty sure some of your friends have one coz HTC phone are almost everywhere nowadays
Simple.... run these commands to establish your current status.
Based on your answers, i can properly asses your situation.
Code:
fastboot getvar version-main
fastboot getvar cid
Maybe we can fix this without the use of goldcard.
mumilover said:
Simple.... run these commands to establish your current status.
Based on your answers, i can properly asses your situation.
Code:
fastboot getvar version-main
fastboot getvar cid
Maybe we can fix this without the use of goldcard.
Click to expand...
Click to collapse
Thanks for your help, this is what I see. Fingers crossed
version-main: 1.92.531.1
cid: T-MOB010_Y∞²
Please recheck that version nr... you are sure its 1.92 or is it 1.94?
Download this:
https://rapidshare.com/files/433519738/1.94.531.1.nbh
rename it to sappimg.nbh
But it on the sdcard and flash it using hboot mode (hold volume - and power together. The "-" sign symbolize decrease of volume).
It should get you back to stock :0)
mumilover said:
Download this:
https://rapidshare.com/files/433519738/1.94.531.1.nbh
rename it to sappimg.nbh
But it on the sdcard and flash it using hboot mode (hold volume - and power together. The "-" sign symbolize decrease of volume).
It should get you back to stock :0)
Click to expand...
Click to collapse
You are the man (or Women) it worked smooth I am now back on 2.2 with official t-mobile update. I hope this helps others who are still looking for a solution.
I got my sisters Wildfire here and it's stuck in a bootloop.
It is NOT rooted, has no S-Off and so on.
It has the stock rom.
It didn't run fluently, so I just rebooted it. But since then it doesn't boot.
Tried taking out battery, putting it back in, no success.
Tried taking out SD-Card. no success.
Then I booted into Bootloader (Vol + Power down).
Buzz PVT Ship S-ON
HBOOT-1.01.0001
MICROP-0622
TOUCH PANEL-ATMELCO 3_16ac
RADIO-3.35.20.10
All I get to choose is Fastboot, Recovery, Clear storage and Sim-lock.
Recovery turns out to be nothing, I can't get to it. Might be, because there is no CWM on it.
I was lucky to be able to root and s-off my DHD, so I don't have any idea, how to fix this problem with the Wildfire.
Any suggestions how to solve this little problem?
Thanks in advance
Which method u adopted for rooting....try revolutionary method and u will be s-on....bt ur mobile doesn't on....try to intall ruu which can be downloaded from shipped-roms.com,download wwe version file....run it,it will install stock rom again,then enable debugging mode,goto revolutionary.io fill the form and copy generated alphanumeric code carefully and download the file run it and u will get s-on....
Sent from my HTC Wildfire using XDA App
Thanks, but actually I neither want root nor s-off on it...I just want to get this smartphone to boot again...I'll try to get the RUU on it, like you suggested
Sent from my Desire HD using Tapatalk
Would "RUU_Buzz_Froyo_HTC_WWE_2.22.405.1_Radio_13.55.55.24H_3.35.20.10_release_160191_s
igned.exe" be the right one?
And if, what to do next with it?
Thanks in advance
- Extract the Rom.zip from the RUU you listed. Procedure here:
http://lukasz.szmit.eu/2010/04/extracting-rom-files-from-htc-android.html
- Rename this zip to PC49IMG.zip
- Place this on the root of the sd card
- Reboot in HBoot mode, the phone will detect the file and will attempt to install. Select Yes and let it proceed.
Thanks, I'll do that when I'm done in University :-D
Just so I have more opportunities in case this happens again.
Could you give me a link to a instruction how to root and s-off?
This would help
And, just in case, which do you think is the best Custom Rom for the Wildfire?
You can use Revolutionary to get S-OFF and Clockworkmod Recovery. Guide here:
http://joel5121.blogspot.com/2011/06/wildfire-22-root-tutorial.html
The only thing that has changed is AlphaRev's Website. The new address is revolutionary.io. Everything else remains the same. Although, you will need a booting device to get it to work.
Lastly, ROM choice depends on whether one would like to keep HTC Sense or not. If not, then I would go with Cyanogenmod / Oxygen (Two ROMs I am pretty sure are available for the DHD as well). And, if you would like to keep HTC Sense, then the current favorites are DK Custom ROM and RemPuzzleROM.
Complete Listing available in the Index Thread linked in my Sig.
Good Luck
I only want to flash a ROM on the Wildfire. My dhd runs on arhd and I won't change that well, unless there's a newer version of arhd
Anyways, what is the best sense ROM
for the Wildfire? Should run smooth but stable and fast. And of course it should've good battery life
Sent from my refrigerator using Tapatalk
I'm stuck myself. Wildfire is working again, but neither can I root nor can I make S-OFF.
On AlphaRevX it "sends in Caroline" and "Caroline" comes out with an error report
However, USB-Debugging was turned on, SD Card active, connected to pc, but "only charge"...
That far for S-Off...
Then I'm trying unrevoked. Works so far, until the Wildifre is in the bootloader. Unrevoked tells me, it's waiting for bootloader. When I choose Fastboot on the device, unrevoked works on and tells me "Waiting for HBOOT to be ready..."
Nothing happens after that. If I choose Bootloader on the device, unrevoked tells me, that it has lost connection to the phone.
Then I tried Gingerbreak. Gingerbreak works, reboots the phone, I check for SU and can't find it. So I guess it's not rooted then :-/
Any suggestions?
Your only (free) option is Revolutionary on Wildfire's with official 2.2.1 and HBoot 1.01.x. Any other method (Unrevoked, Gingerbreak, SuperOneClick etc) will not work and will result in failure. Errors on Revolutionary can usually be treated EXCEPT when it says "Not writing bad block at mtd 0x00000", in which case, there are bad blocks on the NAND memory, and there is no fix yet.
The paid option is to find a store with an XTC Clip hardware box, which can S-OFF the Wildfire as well. They will charge you a 1-time fee for using it.
3xeno said:
Your only (free) option is Revolutionary on Wildfire's with official 2.2.1 and HBoot 1.01.x. Any other method (Unrevoked, Gingerbreak, SuperOneClick etc) will not work and will result in failure. Errors on Revolutionary can usually be treated EXCEPT when it says "Not writing bad block at mtd 0x00000", in which case, there are bad blocks on the NAND memory, and there is no fix yet.
The paid option is to find a store with an XTC Clip hardware box, which can S-OFF the Wildfire as well. They will charge you a 1-time fee for using it.
Click to expand...
Click to collapse
So since this is exactly the fault that is displayed, there is nothing I can do...
But this other tool for s-off ain't working either. If I'd have at least s-off...in this tutorials I first make s-off and afterwards there is a zip archive which will give me SU. Can I install cwm without Root? I'd really like to flash cyanogen...
Sent from my refrigerator using Tapatalk
No, unfortunately, as I stated in my previous post, you cannot.
The best option will be revolutionary but solve ur first problem and then move on to this...we r always here....
Sent from my HTC Wildfire using XDA App