Database Users

Please help on my dead HD2

my tmo-hd2 was installed with hspl3 and then after flash it with RUU_Leo_hTC_Asia_WWE_1.48.707.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe it is completely dead, no power, no response to any key bottom..
what happen?!!
Thank you for any idea.

zzhulm said:
my tmo-hd2 was installed with hspl3 and then after flash it with RUU_Leo_hTC_Asia_WWE_1.48.707.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe it is completely dead, no power, no response to any key bottom..
what happen?!!
Thank you for any idea.
Click to expand...
Click to collapse
Well try entering the bootloader..!!!
& flash some custom ROM if you have..!!!

zzhulm said:
my tmo-hd2 was installed with hspl3 and then after flash it with RUU_Leo_hTC_Asia_WWE_1.48.707.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe it is completely dead, no power, no response to any key bottom..
what happen?!!
Thank you for any idea.
Click to expand...
Click to collapse
Well i suppose is wrong RUU for tmo users ...Asia RUU supports 512 hd2 version while the tmo hd2 supports 1024..thats why its not responding!try to boot it with power button pressed with volume down together to go into bootloader mode(tricolor) and see if u can flash original RUU costum Rom for tmo!!good luck ..

access to bootloader (4-colored screen) screen from magldr?

is it possible to access the bootloader screen from magldr menu .....if not can it be done in future magldr version?.....the reason i m asking is because on one of my htc hd2....it's impossible to enter bootloader....

deziguy420 said:
is it possible to access the bootloader screen from magldr menu .....if not can it be done in future magldr version?.....the reason i m asking is because on one of my htc hd2....it's impossible to enter bootloader....
Click to expand...
Click to collapse
You can't enter it through magldr. Only if you turn phone off, then while pressing vol down and holding, press power. I highly doubt that feature will be in future releases.

Flash Problems

First off I'm a noob so sorry if this has been posted before but I could not find it. I flashed MAGLDR 1.2 few weeks ago and then flashed M-deejay's Gingerbread NAND and everthing worked great. Then MAGLDR 1.3 came out so I thought I would upgrade it at this point, now nothing will flash on my phone. When I try to reflash any rom/magldr (anything) it can not establish a connection to my phone. I have a US Tmobile HD2, I can use Win 6.5 and SD Android but can not flash anything to my ROM at all. I hope that any of this makes sense. Thanks

Did you put the phone into bootloader mode?
(Power off, hold down the volume down button and briefly press the power button - keep holding volume down)

And run the flasher as administrator

johncmolyneux said:
Did you put the phone into bootloader mode?
(Power off, hold down the volume down button and briefly press the power button - keep holding volume down)
Click to expand...
Click to collapse
Yes, but even when you flash MAGLDR you have to be in win with activesync, I did that too.

StephanV said:
And run the flasher as administrator
Click to expand...
Click to collapse
I do that too, When I try to flash something it goes all the way to the upgrade button then I press next and it shows the update bar @ 0% and stays there for several mins then goes to a recovery screen. This happens with any flash even something simple like a boot screen flash.

scottzman said:
Yes, but even when you flash MAGLDR you have to be in win with activesync, I did that too.
Click to expand...
Click to collapse
Eerhm, when starting the phone in Bootloader modus, there's no need for activesync anymore.
Start the phone in bootloader mode, and make sure activesync is NOT active on your pc.

Do you still have 2.08.hspl and the required 2.08.50 (or higher) radio? As suggested boot into bootloader and connect to pc. Does "usb" show up on screen?

ClydeB1 said:
Do you still have 2.08.hspl and the required 2.08.50 (or higher) radio? As suggested boot into bootloader and connect to pc. Does "usb" show up on screen?
Click to expand...
Click to collapse
I cant even flash hspl or the raido /edit It was the hspl! THANK YOU sooooo much

What shows on screen when in bootloader mode? Also, does "usb" show up on screen when connected to your pc?

It works! You guys are amazing!!

Glad it worked

help. stuck in magldr 1.11

cant put the phone in three color state with vol down + power.
any other way to flash magldr 1.13????

What do you mean you can enter the 3 color state? Do you have any issues with your hardware buttons?

lqtdc said:
cant put the phone in three color state with vol down + power.
any other way to flash magldr 1.13????
Click to expand...
Click to collapse
You should really get your volume button checked. If its a hardware problem, then it can be fixed. Otherwise its bricked

If you have fastboot installed on your computer you can..
Extract the zimage from the zip file
then while phone is on and connected via usb (adb debugging on)
adb reboot-bootloader
then when in bootloader mode
fastboot flash zimage zimage
fastboot reboot
Hope this helps..

smokers said:
What do you mean you can enter the 3 color state? Do you have any issues with your hardware buttons?
Click to expand...
Click to collapse
no the button work ok. when i press in magldr 1.11 works ok.

shanman-2 said:
If you have fastboot installed on your computer you can..
Extract the zimage from the zip file
then while phone is on and connected via usb (adb debugging on)
adb reboot-bootloader
then when in bootloader mode
fastboot flash zimage zimage
fastboot reboot
Hope this helps..
Click to expand...
Click to collapse
sorry, to do this i have to be in android, dont???

Yep
Sent from my Nexus One using xda premium

there is a chance that the problem was the radio???
i dont check the radio. any way to flash tne 2.15 radio without the 3 color screen???

shanman-2 said:
Yep
Sent from my Nexus One using xda premium
Click to expand...
Click to collapse
sorry but i dont have a android to flash without recovery

lqtdc said:
there is a chance that the problem was the radio???
i dont check the radio. any way to flash tne 2.15 radio without the 3 color screen???
Click to expand...
Click to collapse
No.
Have you got the hd2 Nand toolkit?
What s the set up on the phone?
Spl etc
Sent from my Nexus One using xda premium

i have the 2.08 SPL or HSPL i dont remenber but i can put the magldr 1.11 with the romutility from windows but now i cant put in bootloader screen to put the magldr 1.13. i dont check the value of the radio.

Just in case ..are you holding volume down button and pressing and releasing power button while still holding volume button?
It really looks like there is a prob with the volume. As was said already it can be fixed
A cracked volume ribbon cable is not uncommon! !
Sent from my Nexus One using xda premium

the button is not the problem. when the magldr 1.11 loads the button works ok.

Magldr does not change the radio!
What exactly did you so?
Sent from my Nexus One using xda premium

i dont check the radio when install the magldr 1.11.
first i install the 2.08 HSPL, then with the ROMUpdateUtility install MAGLDR 1.11.
i never can put the phone in bootloader mode, that is my problem. i dont know what is the radio

i would suggest making a clear install using the task29 or WM1.66 instal ect.
you have to hold the vol down button while loading
I hav had a problem with magldr1.13 which was caused by the radio - it didnt want to install on the 2.15.50.14 radio and i have had to downgrade my radio, install magldr1.13 and the update the radio to the 2.50.15.14.
but still consider a fresh install of all things to eliminate some stuff staying in the nand memory after such things ...

my problem is i cant put the phone in bootloader mode (Vol Down + Power).

Man, download original Windows 6.5 ROM with Radio.
And run it. it doesn't need push any button. it sends you to 3-colored screen and installs win 6.5 ROM.
Later you can try magldr again or try your volume or power button.

powerofthink said:
Man, download original Windows 6.5 ROM with Radio.
And run it. it doesn't need push any button. it sends you to 3-colored screen and installs win 6.5 ROM.
Later you can try magldr again or try your volume or power button.
Click to expand...
Click to collapse
I don't think auto loading to bootloader works in magldr.
lqtdc said:
the button is not the problem. when the magldr 1.11 loads the button works ok.
Click to expand...
Click to collapse
If your volume button works then try to install an WP7 or android rom through dft. Why do you need to go into bootloader at the moment?

You seem stuck and may have a bricked phone, try this
hengsheng120 said:
I don't think auto loading to bootloader works in magldr.
If your volume button works then try to install an WP7 or android rom through dft. Why do you need to go into bootloader at the moment?
Click to expand...
Click to collapse
Seems you are stuck, maybe you want to try this:
1. Try to start your phone by holding Volume Down and then press the power button. Keep pressing the Volume down. You should you see the four-color (red, green, blue, white) bootloader screen
2. Check that it says 2.08.HSPL (if not, you should start by flashing the correct HSPL by connecting phone by USB and using HSLP4.exe (run as Administrator in Windows)
3. If you have the correct HSPL check that you have 2.15.50.14 Radio ROM installed. If not, you cannot proceed. (Tip: check every file you wodnload if has been correcty received)
4. If all the above things are correct you can flash MAGLDR 1.3) Still using Voluime Down and powes and the four-color (red, green, blue, white) bootloader screen
5. Now you can boot the phone by pressing and holiding down power. MAGLDR will boot, choos 5 USB Flash and flash your favourite version of Clockworkmod (250 Mb version recommended)
Now you are ready to use MAGLDR and/or Clockworkmod any way you want.
If you skip/downgrade and of use DAF update after 5, your phone will be confused as hell. In that case do a TASK29 and start again from step 1.
Alternatively get a copy of HD2-Tool and do all above steps with that. Its really good.

[Q] HTC HD2 nand android problems

Hello!!
I have a dft nand rom running on my htc but now i wanted to get my htc back to stock, with the Windows mobile 6.5.. I know how to do it, the problem is,, in order to install the dft nand android i had to install the radio, MAGLDR, and the HSPL, and now i need to sync my device to my computer to get it back to stock, I tried the htc sync but it didn't work and by turning on my htc pressing the down volume and the power button it should go to the HSPL but it won't, it has disappeared from my device...
And to install the HSPL again i need to sync my htc to my computer, but i can't..
I would appreciate any kind of help.
Thanks

No syncing is required as far as I know. Boot into the bootloader (vol down+power) then flash the RUU (make sure you hold down both buttons until the bootloader appears). Since you say you can't do that (although you may have just been letting go of the buttons too early) just flash a newer Android ROM. The DFT one is extremely old and was really more of a proof of concept ROM than one which people regularly use.

Can you post a link of a more recent rom?
thanks

I am not using a DFT rom.. i was turning on my htc and i saw that i'm using a Desire_DL from DL Super Init

vol down+power is to go to the HSPL and that i can't do because my HSPL, i don't know why but, it's not there anymore.
Then you have the flash bootloader just by holding the power button..
And i have to install the stock rom with the active sync so i can erase all the MAGLDR and stuff and have my htc as i bought it..
I am having to much trouble with this android thing on my HD2

samnie25 said:
Can you post a link of a more recent rom?
thanks
Click to expand...
Click to collapse
Find one yourself, stop being so lazy.
samnie25 said:
I am not using a DFT rom.. i was turning on my htc and i saw that i'm using a Desire_DL from DL Super Init
Click to expand...
Click to collapse
That doesn't change the fact that it's an old ROM, flash a newer one.
samnie25 said:
vol down+power is to go to the HSPL and that i can't do because my HSPL, i don't know why but, it's not there anymore.
Then you have the flash bootloader just by holding the power button..
And i have to install the stock rom with the active sync so i can erase all the MAGLDR and stuff and have my htc as i bought it..
I am having to much trouble with this android thing on my HD2
Click to expand...
Click to collapse
Lol you need to read the guide in my sig which talks about the terms used for the HD2, volume down + power is to enter the bootloader, you can't 'enter HSPL', it's just something you have to flash.

First of all, i'm not being lazy, you said to install a recent rom, i'm sorry i don't know which are the new ones and the old ones...
Second,.. when you press volume down + power you will get to the HSPL which is an image splited in 4 parts, red, green, blue and white..
That screen its what you get by installing the HSPL and that is the thing missing in my htc, that it use to have but somehow it disappeared and i can't install it again because i can't sync my phone with the computer
The bootloader, you just hold the power button to enter it..
its the MAGLDR
At least in my phone when i hold just the power button it says there "Boot menu", among other things, like boot ad sd, boot ad nand, usb flasher..
So many "boot" words, it must be the bootloader i guess..
The volume down + power is to automatically sync your phone with the computer

I refuse to help you any more. You ARE being lazy, each ROM has a date next to it. You don't know what you're talking about yet you refuse to listen to me (trust me, I know a lot more than you on this subject) and you're not even making any sort of effort. Good luck sorting things out, but I just cba with you any more.

samnie25 said:
First of all, i'm not being lazy, you said to install a recent rom, i'm sorry i don't know which are the new ones and the old ones...
Second,..when you press volume down + power you will get to the HSPL which is an image splited in 4 parts, red, green, blue and white..
That screen its what you get by installing the HSPL and that is the thing missing in my htc , that it use to have but somehow it disappeared and i can't install it again because i can't sync my phone with the computer
The bootloader, you just hold the power button to enter it..
its the MAGLDR
At least in my phone when i hold just the power button it says there "Boot menu", among other things, like boot ad sd, boot ad nand, usb flasher..
So many "boot" words, it must be the bootloader i guess..
The volume down + power is to automatically sync your phone with the computer
Click to expand...
Click to collapse
As Nigel said, each ROM has a date which indicates the last time it was updated.
That is the bootloader screen, either SPL or HSPL. And it can't be "missing". Because if you don't have that, your device wouldn't even boot. You just didn't-know-how-to/couldn't get to it, but it's there.
Again, that screen can't disappear. You may be having issues with your volume rockers. As a matter of fact, your phone is bricked if you don't have that, as I stated earlier.
MAGLDR is indeed a bootloader, but it's not the device's main bootloader.
Wow, just wow. Not because there are many "boot"s, it's a bootloader. The main bootloader of the device is the H/SPL (volume down + end)
i.e. the main bootloader.
Click here for more information about HSPL and MAGLDR.

My volume rockers are working good.. First i thought they were not working well but i checked several times and they seem good.
When i press volume down + power it just goes to the MAGLDR and i know that it shouldn't go.. So i guess my HSPL disappeared somehow..
And i know that in order to install it again, the device must be sync with the computer, but i downloaded the htc sync and it doesn't recognize my phone.
Or as you said "that screen can't disappear" is there any other way to enter it?

... but ... seriously? After all what I had said, you still insist that you don't have HSPL and you need to install it?
Dude, without H/SPL, MAGLDR WILL NOT BOOT.
If you want to go to the bootloader, you must press and HOLD the volume down and boot WHILE STILL holding the volume down.

If you mean the bootloader then call it the bootloader, stop calling it 'the HSPL'. Try this solution from walts
walts said:
Hold Volume Down. Press and hold Reset until you see the BootLoader screen. Reset is the hidden button under the battery cover, lower left side below the SD card slot. You need a plastic or wooden stylus (toothpick will work). DON'T use a pencil, the graphite can get into the button and short it.
I just did it to be sure. It works.
HTH
Walt
Click to expand...
Click to collapse

hspl
Marvlesz said:
... but ... seriously? After all what I had said, you still insist that you don't have HSPL and you need to install it?
Dude, without H/SPL, MAGLDR WILL NOT BOOT.
If you want to go to the bootloader, you must press and HOLD the volume down and boot WHILE STILL holding the volume down.
Click to expand...
Click to collapse
I don't know if it is there or not.. i press volume down and power button and it just doesn't go to that colorful screen.. I've did it before, to get my htc back to stock with the windows mobile rom.
but now it doens't work,. it's like i am not pressing the volume down... if i hold volume down and hold power button it goes to the MAGLDR (Where we have a bunch of options) and if i hold volume down and just press power button (Without holding) it just loads the rom... it's like i am not pressing the volume down, but it is working, i can up and down the volume and i can go up and down through the option in the MAGLDR menu..
So, i don't know
But thanks

HTC
Nigeldg said:
If you mean the bootloader then call it the bootloader, stop calling it 'the HSPL'. Try this solution from walts
Click to expand...
Click to collapse
Just tried that, with the reset.. didn't work.
but thank.
I guess there must be some problem with the volume controller...
i will open the phone and try..
but thank you all for the time