after flashing many spl on my jasjam suddnly my os dosent start.
when i turn on the mobile just black screen
when i open the tri color screen its show
"
ggggg>
ipl 1.04
ggggg>
spl-2.30.olipro
"
i tried to flash many rom and spl by RUUWrapper and sd card
in RUUWrapper its told me "invalid model id"
in sd card its give me that error "00068002"
any one can help me pleas??!!
sorry for my bad language
Related
I have HTC 4350 (Sim Locked) and i run WM6 utility with CID unlock (ASerg19). After the upgrade is completed 100% , the device is freezed on a green screen and stopped. if i enter bootloader mode (Trying to recover to Original ROM WM5) it gives me 4 Colors Screen with IPL 1.08.0001 , SPL 1.08.0001 . And the upgrade process halt on 0% and the ROM Utility from PC exits with an error [300]
Plz need your advise urgently
Thanks
Maged111 said:
I have HTC 4350 (Sim Locked) and i run WM6 utility with CID unlock (ASerg19). After the upgrade is completed 100% , the device is freezed on a green screen and stopped. if i enter bootloader mode (Trying to recover to Original ROM WM5) it gives me 4 Colors Screen with IPL 1.08.0001 , SPL 1.08.0001 . And the upgrade process halt on 0% and the ROM Utility from PC exits with an error [300]
Plz need your advise urgently
Thanks
Click to expand...
Click to collapse
Find an ruu suit your cid
http://forum.xda-developers.com/showthread.php?t=342273
I have HTC 4350 and i run WM6 utility with CID unlock (ASerg19).I closed flasher and only console program worked with my ppc, the device is freezed on a white screen and stopped. if i enter bootloader mode (Trying to recover to Original ROM WM5) it gives me 4 Colors Screen with IPL 1.08.0001 , SPL 1.08.0001 . And the upgrade process halt on 0% and the ROM Utility from PC exits with an error [300]
i have only sunday to recover. Plz help!
P.S. I tryed all ROMs what i downloaded
I have russian CID (HTC__A07) and ROMUpdate doesn`t want to flash
how do u know what cid you have if its stuck in boot loader?
its an htc model i downloaded the rom fromhtc but it reboots after 2% and shows error ( invalid model id ) error 244 thats really odd i dont get it.
any help would be great.
thanks
Ok here is the "Thing"
i put a hermes ROM on Elf (soft black) and i think the SPL and IPL has changed
its now:
IPL 1.17.0002 ,is it right ?
SPL 1.17.0000, is it right?
and i tried to download the Offical HTC elf Rom but after 2% it restart and write ID Vendor ERROR
what should i do?
P.S:i tried to do SuperCID but it need The ActiveSync Progoram to be ON, im stuck on bootloader Screen
MKR
Hi,
I have htc polaris (pola100)
but I unwillingly flash spl version 3.13.000 but now doesn't go anythink flash,
don't go flash anythink other spl version (1.25.0000, 1.28.0000)
Please anybody help me.
You had to flash the original ROM of your Polaris before flashing the Original SPL.
Can you get the tricolor screen?
I have original spl but after I flash hard-spl v2 and flash not original rom,but this rom was very bad.
So I would back my original wm6.1 rom htc, so i find original three original spl (1.25.0000 1.28.0000 3.13.0000) I flash spl 3.13.000 but now doesnt flash anythink anythink spl and anythink rom
please and now?
(ps: sorry my english is bad)
but yes a see my bootloader , i see red blue green and white color
on the left side is write:
POLA100
SPL-3.13.0000
CPLD-2
and the right side is write:
RUUNBH
okay, I understand.
Isn't there any ROM flashed?
i tried rom:
3LIT3_VI_Full
udK_Syrius_R7_WWE
c_shekhar_Pola_WM3.13.755CS_Build20755_Public_Final
and original rom htc wm6.1
But all roms frozen near 0% on htc display
I think you've bricket your phone
but on this list:
http://forum.xda-developers.com/showthread.php?t=351964&page=28
he have same problem as I.
mtelleria mtelleria is offline
Junior Member
Join Date: Jun 2008
Posts: 6
Default Problems installing HardSPL
Hi,
I have installed the last official version on WM6.1 on my htc, now i want to install one custom rom from this forum.
I tryed to istall first HardSPL, but i don't know why, the process get stuck at 0% of the istall and never continue.
In the 3 color screen appear:
POLA100
SPL-3.13.0000
CPLD-2
Someone can help me?
Thanks
____AND THIS ALSO BUT OTHER SPL:
he write:
"donchischotte" donchischotte is offline
Junior Member
On the screen I read:
-------------
RUUNBH
POLA100
SPL-1.28.0000
CPDL-2
--------------
Here is what I do and what happens when I try to use HARD-SPL V2:
1) I connect the USB cable and the writing on the device changes from "serial" to "USB"
2) I run romupdateutility
3) I check "I understand..." + next
4) I check "I completed..." + next
5) on the PC a message "verifying the information on your PDA phone, please wait" appears and after a while the device switches to a screen with a progress bar at 0%, while on the PC the following message appears:
--------------------------------------------------------------
Current information about your PDA phone:
Image version:
Select from below:
UPDATE Update the current ROM version
--------------------------------------------------------------
6) I click UPDATE and the following appears:
------------------------------------------------------------------
Verify that you want to update the ROM version:
From:
Image version:
To:
Image version: OliNex-2.20
------------------------------------------------------------------
7) I press "next" twice and I get the message "updating the ROM image on your PDA phone", but the progress bar is stuck at 0% and after a minute or so i get the ERROR[262] : UPDATE ERROR
I tried usinr both Vista and XP, with or without MicroSD and SIM card. It's always the same.
I tried flashing different SPLs (even the two original ones) with the same problem. If I try to flash a ROM I get the ERROR [294] : INVALID VENDER ID"
after 1% progress.
I HAVE SAME PROBLEM
I think you must wait Olipro or another chef here to say you how to refalsh SPL with 2.40 version in command line
You can try to flash you original ROM via SD-Card.
what is the solution ? I have the same problem with :
SPL-3.13.0000
I can't flash ...
Now its workhttp uff;-)
I flash my polaris 10* and all of a sudden work.
My Gene (older Gene) had this configuration:
ONBL 1.11.0000
SPL 1.10.Olip
It worked very well with WM6.5
But when I downloaded the orefkov spl to unlock it will not turn over and just enter bootloader mode
Now this:
ONBL: 1.11.0000
SPL: 1.07.Oref
Please help me, I do not know what to do
Everytime I try to install the new rom, even as a unique, does not work and displays the error 300 in ROM Update Utility
Help me
please!!
I redid all the method described by Orefkov
I tried several roms, but when it comes time to write the rom on the device, is at 0% and the RUU gives error 300
I do not know what else to do.
This happened after I try to unlock CID.
Somebody help me, please, this phone is not mine.
Show me some topic, whatever.
I also tried the method to make it boot from the SD CARD, but I could not make it work, maybe cuz this is the old gene.
Help me ..... please!
i need your help
after flashing many spl on my jasjam suddnly my os dosent start.
when i turn on the mobile just black screen
when i open the tri color screen its show
"
ggggg>
ipl 1.04
ggggg>
spl-2.30.olipro
"
and it should show
"
herm100
ipl 1.04
herm100
spl-2.30.olipro
"
i tried to flash many rom and spl by RUUWrapper and sd card
in RUUWrapper its told me "invalid model id"
in sd card its give me that error "00068002"
any one can help me pleas??!!
sorry for my bad language
omarjh said:
i need your help
after flashing many spl on my jasjam suddnly my os dosent start.
when i turn on the mobile just black screen
when i open the tri color screen its show
"
ggggg>
ipl 1.04
ggggg>
spl-2.30.olipro
"
and it should show
"
herm100
ipl 1.04
herm100
spl-2.30.olipro
"
i tried to flash many rom and spl by RUUWrapper and sd card
in RUUWrapper its told me "invalid model id"
in sd card its give me that error "00068002"
any one can help me pleas??!!
sorry for my bad language
Click to expand...
Click to collapse
you better follow guide to Up and Downgrade rom at here --> http://web.archive.org/web/20080822113159/www.mrvanx.org/thg/index.php
do'nt panic!
omarjh said:
i need your help
after flashing many spl on my jasjam suddnly my os dosent start.
when i turn on the mobile just black screen
when i open the tri color screen its show
"
ggggg>
ipl 1.04
ggggg>
spl-2.30.olipro
"
and it should show
"
herm100
ipl 1.04
herm100
spl-2.30.olipro
"
i tried to flash many rom and spl by RUUWrapper and sd card
in RUUWrapper its told me "invalid model id"
in sd card its give me that error "00068002"
any one can help me pleas??!!
sorry for my bad language
Click to expand...
Click to collapse
hey man! just first time read this before flashing any roms! and this is wiki page for any upgrading problems
and this is post from our lovely veyka
good luck dude)
I think you will get)