LOL, it would appear I'm "that guy." - EVO 4G General

You know the guy I'm talking about: while he's sitting in the VD clinic with an itchy crotch, he's praying to God: "Oh God, please don't let it be herpes. If it's not herpes I swear I won't visit another whorehouse as long as I live."
Then, as soon as the doctor announces that he's just got a case of jock itch and he should put some anti-fungal on it, the guy runs to the whorehouse to celebrate....
Because, see, just a few days ago I semi-bricked my Evo running after a failed Unrevoked. Not sure why it failed, but the phone would lock up every 15 seconds. So I flashed a stock image to repair the damage, and then a newer one, and wound up with a phone that worked except it wouldn't read the SD card or USB port (charging would only occur if the phone was turned off).
So as I was working my way through the fix I kept promising myself that if I got it fixed I'd just keep it stock unrooted and be happy with it.
Then, thanks to the good fold here, I managed to get the device running again the way it should. Wheeew, I thought, I'm happy now.
But... of course... it only took a few hours before the "root" itch hit me again. Fixing the semi-brick issue required installing z4root, and that app gave me a taste of da root acces... and ooooh did it taste goooood! Problem with z4root, though is that you're still s-on, and it's my understanding that if you're s-on and take the new GB update, you're SOL (at least for the time being). And I wanted to be s-off for the peace of mind it offered.
So my desire for real permanent root got the better of me. I decided that the reason unrevoked had failed for me the first time probably had something to do with all the cr*p I had installed on my phone. So I used Titanium backup along with z4root to back up the stuff I'd installed since getting my phone back and re-flashed the stock 2.2 image that had worked for me, and started with afresh phone.
Tried unrevoked one more time and... viola! It worked!!!
I'm happy now... a happy, unrepentant sinner!
Anyway, if you've read through all this: bless you.
I do have a couple of questions:
1) Am I correct that being s-off means I can now install unsigned ROMs the same way I installed the stock image I am on? (basically, rename it PC36IMG.zip, put it on the root of the SD card and boot into the bootloader and let it install)?
2) do I need to run "unrevoked forever"? I'm not clear on this. Getting some conflicting information from searching. My best guess, from what I've read, is that the latest unrevoked includes all the stuff that unrevoked forever does.

-Is blessed-
1. You don't need to make a PC36IMG to flash a rom; just download the file, then backup your current rom, do a full wipe, then flash the rom zip
2. You don't need to flash the forever zip; it was used to give you nand unlock -s-off- in the older versions of unrevoked, and was incorporated into the new one.
And keep applying that jock itch.

And once you flash a couple roms, you will get the itch to start using the kitchen and playing with your own custom rom, its only a matter of time, lol

I probably try two a week now. Its amazing how much work these guys do.

Unrevoked forever is incorporated in Unrevoked now. So need for that.
Also, you dont flash them in the bootloader. Boot into the bootloader, then use volume down to go down to the option that says "recovery" then use the power button to select. It will boot into recovery menu which should have a list of options, go down to flash zip from sdcard, then select zip from sdcard. It will show you a list of everything on your sdcard. Navigate to wherever your rom .zip file is that you downloaded and select it. It will ask you if you want to flash, select yes.
PS dont forget to wipe before you flash. ("Wipe all user data/factory reset" option when your in recovery.)

RileyGrant said:
Unrevoked forever is incorporated in Unrevoked now. So need for that.
Also, you dont flash them in the bootloader. Boot into the bootloader, then use volume down to go down to the option that says "recovery" then use the power button to select. It will boot into recovery menu which should have a list of options, go down to flash zip from sdcard, then select zip from sdcard. It will show you a list of everything on your sdcard. Navigate to wherever your rom .zip file is that you downloaded and select it. It will ask you if you want to flash, select yes.
PS dont forget to wipe before you flash. ("Wipe all user data/factory reset" option when your in recovery.)
Click to expand...
Click to collapse
OK, so that's pretty much the same as with the Nook flashing Phiremod (a Cyanogenmod variant).

Related

Noob trying to flash to 2.1d

I have successfully flashed my Sprint THC hero with no problems.
My issue though is flashing the phone to 2.1d. i can't for the life of me follow these directions and I am really stumped on the process of doing a nandroid and flashing the ROM.
I downloaded the nandroid from this site but not sure where I put the directory with the files at. Can anyone break this process down into "ejpyle terminology"?
My problems are:
- where to copy the nandroid directory
- where to put the 2.1d ROM
- do i need this busybox that everyone is talking about?
Successfully flashed what? And what method.
If you mean you successfully ROOTED your Phone then huzzah, that's step one complete.
Part of the rooting process should include putting a recovery image on the phone. If you did that correctly then do this, power off the phone.hold down the home button and power it back up. In a few seconds you should boot into a recovery menu with options to do a nandroid backup/restore turn on the usb connection to move files to the phone from your pc, and flashing a zip. If you don't have this recovery menu then you need to install it.
I don't think you have downloaded a Nandroid, I think you have downloaded an "update.zip" as we so affectionitly call them around here. This is a term used from the first set of recovery tools we had, where we had to rename update files update.zip to be loaded. Thankfully the recovery software has been updated to let us store and use multiple files.
So you probable have fresh-cdma-hero-2.0d.zip downloaded.
Plug your phone into USB and set it to Mount SD Card or what ever it says in 1.5
Copy this file to the root of the sdcard. don't put it in to any folders just F:\ or whatever the drive letter is.
THEN
Unmount the sdcard or turn off the disk drive mode (Cant remember what 1.5 calls it)
THEN
Power off the phone.
Power the phone back on whilst holding the home key. When you feel the vibration (let your girl hold it if she wants ROFL) let go and it will boot into recovery.
THEN
Go to Wipe...do Factory Reset
THEN
Wipe dalvik
THEN
Go back to Flash Update from SDcard
Select the update file above and hit the home key to flash it.
The phone SHOULD install and go back to the main screen of recovery.
THEN select
Reboot
THEN
Wait a hell of a long time 10+ minutes is NOT uncommon (it has to rebuild dalvik and other stuff)
THEN
When the phone boots hit Always Allow for the memory settings app.
THEN
Setup all your google info again.....
THEN
You should be good to go
AND DEN????????
HAHAHAHAHAHAHA
EDIT:
I am SURE that I left a step out above, just go with the flow and wipe everything under the wipe menu. It's laid out so a monkey can do this stuff...hence the reason I am able to.
gunnyman said:
Successfully flashed what? And what method.
If you mean you successfully ROOTED your Phone then huzzah, that's step one complete.
Part of the rooting process should include putting a recovery image on the phone. If you did that correctly then do this, power off the phone.hold down the home button and power it back up. In a few seconds you should boot into a recovery menu with options to do a nandroid backup/restore turn on the usb connection to move files to the phone from your pc, and flashing a zip. If you don't have this recovery menu then you need to install it.
Click to expand...
Click to collapse
thank you thank thank you... you have me going in the right directions.
Quesion..what is the best (most reliable without as many bugs) ROM to load that is 2.0-1?
ejpyle said:
thank you thank thank you... you have me going in the right directions.
Quesion..what is the best (most reliable without as many bugs) ROM to load that is 2.0-1?
Click to expand...
Click to collapse
Not to be rude, because you seem like a decent enough person, but please read http://forum.xda-developers.com/showthread.php?t=668905 before asking anything else. Most of your answers are there, and 'search' will find the rest.
Kcarpenter said:
I don't think you have downloaded a Nandroid, I think you have downloaded an "update.zip" as we so affectionitly call them around here. This is a term used from the first set of recovery tools we had, where we had to rename update files update.zip to be loaded. Thankfully the recovery software has been updated to let us store and use multiple files.
So you probable have fresh-cdma-hero-2.0d.zip downloaded.
Plug your phone into USB and set it to Mount SD Card or what ever it says in 1.5
Copy this file to the root of the sdcard. don't put it in to any folders just F:\ or whatever the drive letter is.
THEN
Unmount the sdcard or turn off the disk drive mode (Cant remember what 1.5 calls it)
THEN
Power off the phone.
Power the phone back on whilst holding the home key. When you feel the vibration (let your girl hold it if she wants ROFL) let go and it will boot into recovery.
THEN
Go to Wipe...do Factory Reset
THEN
Wipe dalvik
THEN
Go back to Flash Update from SDcard
Select the update file above and hit the home key to flash it.
The phone SHOULD install and go back to the main screen of recovery.
THEN select
Reboot
THEN
Wait a hell of a long time 10+ minutes is NOT uncommon (it has to rebuild dalvik and other stuff)
THEN
When the phone boots hit Always Allow for the memory settings app.
THEN
Setup all your google info again.....
THEN
You should be good to go
AND DEN????????
HAHAHAHAHAHAHA
EDIT:
I am SURE that I left a step out above, just go with the flow and wipe everything under the wipe menu. It's laid out so a monkey can do this stuff...hence the reason I am able to.
Click to expand...
Click to collapse
You rock....You just taught a death and blind monkey how to do it. Thanks man!!!!! I will be sure to have my wife hold the phone for the vibrate thing. LMFAO
ejpyle said:
thank you thank thank you... you have me going in the right directions.
Quesion..what is the best (most reliable without as many bugs) ROM to load that is 2.0-1?
Click to expand...
Click to collapse
There is no best one. The 2.1 ROMS are all very stable. Just avoid the ones that say {DEV} in the thread title because they are under development and likely have lots of stuff broken in them.
Decide what you want for yourself, beauty, speed, both? A good hint is to look for the ROM threads that have the most pages attached to them these are the ROMS that have the most discussion and help within them.
ejpyle said:
You rock....You just taught a death and blind monkey how to do it. Thanks man!!!!! I will be sure to have my wife hold the phone for the vibrate thing. LMFAO
Click to expand...
Click to collapse
DO NOT FLASH THE 2.1 Signed RUU Test ROM
OR I WILL FIND AND KILL YOU!
gunnyman said:
There is no best one. The 2.1 ROMS are all very stable. Just avoid the ones that say {DEV} in the thread title because they are under development and likely have lots of stuff broken in them.
Decide what you want for yourself, beauty, speed, both? A good hint is to look for the ROM threads that have the most pages attached to them these are the ROMS that have the most discussion and help within them.
Click to expand...
Click to collapse
thanks man, if I win the power ball lottery I will be sending you all a private message.
one more quickie though, If Sprint releases the 2.1 before I become eligible for AARP will I have to flash back to the 1.5 version before updating my device with it?
Kcarpenter said:
I don't think you have downloaded a Nandroid, I think you have downloaded an "update.zip" as we so affectionitly call them around here. This is a term used from the first set of recovery tools we had, where we had to rename update files update.zip to be loaded. Thankfully the recovery software has been updated to let us store and use multiple files.
So you probable have fresh-cdma-hero-2.0d.zip downloaded.
Plug your phone into USB and set it to Mount SD Card or what ever it says in 1.5
Copy this file to the root of the sdcard. don't put it in to any folders just F:\ or whatever the drive letter is.
THEN
Unmount the sdcard or turn off the disk drive mode (Cant remember what 1.5 calls it)
THEN
Power off the phone.
Power the phone back on whilst holding the home key. When you feel the vibration (let your girl hold it if she wants ROFL) let go and it will boot into recovery.
THEN
Go to Wipe...do Factory Reset
THEN
Wipe dalvik
THEN
Go back to Flash Update from SDcard
Select the update file above and hit the home key to flash it.
The phone SHOULD install and go back to the main screen of recovery.
THEN select
Reboot
THEN
Wait a hell of a long time 10+ minutes is NOT uncommon (it has to rebuild dalvik and other stuff)
THEN
When the phone boots hit Always Allow for the memory settings app.
THEN
Setup all your google info again.....
THEN
You should be good to go
AND DEN????????
HAHAHAHAHAHAHA
EDIT:
I am SURE that I left a step out above, just go with the flow and wipe everything under the wipe menu. It's laid out so a monkey can do this stuff...hence the reason I am able to.
Click to expand...
Click to collapse
I hope the possible step left out above does not give me "another" bricked phone.
ejpyle said:
I hope the possible step left out above does not give me "another" bricked phone.
Click to expand...
Click to collapse
I think I may have left out a step if you have apps on your sd card...
NOT WAIT I LEFT OUT THE DO A NANDROID BACK UP FIRST!!!!!!!!!!! DO THAT FIRST!!!! HOLY CRAP I HOPE YOU HAVEN'T DONE ANYTHING YET!!! DO A NANDROID!!!!!!!
Nope no chance at all of that as far as I can tell.
The only bricks we have seen are from people downloading GSM software or dropping a brick on their phone...that sounded funnier in my head.
smw6180 said:
Not to be rude, because you seem like a decent enough person, but please read http://forum.xda-developers.com/showthread.php?t=668905 before asking anything else. Most of your answers are there, and 'search' will find the rest.
Click to expand...
Click to collapse
Because you too seem like a decent person I will share this with you....
I followed a thread on here at the beginning of march to install a ROM and the directions (which I followed exact) bricked my phone. I spent hours reading up on this website to find out after the fact that the RUU might have a bug and some users will have issues. With that said, I decided to ask questions. This site has a lot of cleanup going on (no disrespect to anyone here as you are all VERY intelligent) and I do not think that someone as myself would be comfortable just "searching" for the answer without asking questions first with respect to the experience we have had in the past.
Kcarpenter said:
I think I may have left out a step if you have apps on your sd card...
NOT WAIT I LEFT OUT THE DO A NANDROID BACK UP FIRST!!!!!!!!!!! DO THAT FIRST!!!! HOLY CRAP I HOPE YOU HAVEN'T DONE ANYTHING YET!!! DO A NANDROID!!!!!!!
Nope no chance at all of that as far as I can tell.
The only bricks we have seen are from people downloading GSM software or dropping a brick on their phone...that sounded funnier in my head.
Click to expand...
Click to collapse
LOL I have not done it yet. I am about to copy this nandroid - file name "nandroid-2.0.zip" to my SDCARD. then i will do it.
ejpyle said:
LOL I have not done it yet. I am about to copy this nandroid - file name "nandroid-2.0.zip" to my SDCARD. then i will do it.
Click to expand...
Click to collapse
So you have gotten me curious now, where did you pick up that file at?
My only guess is that someone has posted a nandroid of their device and zipped it. Most of the Rom downloads are ROMNAME.zip....
You can always try to load it, it won't load if its not setup properly inside for a rom.
And about your going back to 1.5 to update to sprints 2.1:
IF YOU UPDATE TO SPRINTS OTA 2.1 UPDATE YOU WILL NOT BE ABLE TO ROOT AGAIN UNTIL SOMEONE FINDS ANOTHER EXPLOIT!!! WHICH COULD BE NEVER!!
Kcarpenter said:
So you have gotten me curious now, where did you pick up that file at?
My only guess is that someone has posted a nandroid of their device and zipped it. Most of the Rom downloads are ROMNAME.zip....
You can always try to load it, it won't load if its not setup properly inside for a rom.
And about your going back to 1.5 to update to sprints 2.1:
IF YOU UPDATE TO SPRINTS OTA 2.1 UPDATE YOU WILL NOT BE ABLE TO ROOT AGAIN UNTIL SOMEONE FINDS ANOTHER EXPLOIT!!! WHICH COULD BE NEVER!!
Click to expand...
Click to collapse
I got it from here....
http://dx.infernix.net/nandroid-2.0.zip
when you boot into recovery, what do you see?
If you rooted correctly and put a recovery image on there there isn't anything else you have to do to enable Nandroid.
ejpyle said:
I got it from here....
http://dx.infernix.net/nandroid-2.0.zip
Click to expand...
Click to collapse
Ok, so this leads me to another question. Where is the thread that links to this download?
The reason I am worried about this file now that I see it:
It's only 942kb - WAY to small for a rom or nandroid.
gunnyman said:
when you boot into recovery, what do you see?
If you rooted correctly and put a recovery image on there there isn't anything else you have to do to enable Nandroid.
Click to expand...
Click to collapse
I had a triangle with an exclamation point.
I am copying the recovery to my SDCARD now... recovery-RA-heroc-v1.5.2
ejpyle said:
I had a triangle with an exclamation point.
I am copying the recovery to my SDCARD now... recovery-RA-heroc-v1.5.2
Click to expand...
Click to collapse
1.6.2 is the latest. Not a whole lot different from 1.5.2 but some bugs where fixed and you can get the nifty Green Nexus Carebear back ground.
Kcarpenter said:
1.6.2 is the latest. Not a whole lot different from 1.5.2 but some bugs where fixed and you can get the nifty Green Nexus Carebear back ground.
Click to expand...
Click to collapse
I copied everything you indicated to my card. When I press HOME and PWR together I get a triangle with an exclamation point. Did this monkey not do something right?

Lost all data...

I had rooted my evo with of course the unrevoked and my brother was playing around with my phone and did a format on the sdcard now i lost my backup and all data dose anyone know how to get back to stock or know of a stock rom any help i will take thanks...
You might give "Testdisc" or "Recuva" a try. I have used both to recover deleted and over-written files. Both are open source and surprisingly effective. I prefer Testdisc and always have it at the ready of my computers.
If you really want to get back to stock, find the post in the dev section called shipped roms. Download the 3.70.xxx .zip and make sure it is named PC36IMG.zip and not PC36IMG.zip.zip and put it on the root of your sdcard. Boot your phone into bootloader by holding down volume down and power buttons and it will scan the card and find the PC36IMG and ask if you want to update. Select yes and let it do it's thing until it asks you to reboot your phone. Reboot and you will be back to stock. Make sure your battery is charged before starting.

[Q] current rooting/2.3 instructions

As the thread title states, I'm looking for info on the steps to root my stock MT4g, and install the new ROM that's floating around. I'm pretty technically capable, but the info I've found looks slightly dated. When I was active in the iPhone jailbreak scene, using old directions could brick a phone pretty easy, or prevent future jailbreaking. I haven't kept up with this scene enough to be able to know what's dated and what isn't.
This is my current plan, please correct it if I'm missing anything or have it wrong.
(based on wiki.cyanogenmod.com/index.php?title=TMobile_myTouch_4G:_Full_Update_Guide)
I've got ADB going
I need a backup solution for app data right? What's my best option here?
Once backed up, I plan to install busybox, Superuser package & Temporary Root package via ADB
Use gfree to make that root permanent
Install ClockworkMod recovery
Reboot into recovery, and install faux123's ROM
Does that sound correct, and did I skip anything? Any input at all is welcome, I'd like to stand tall on the backs of giants.
There are two popular methods floating around
You can either use the Root.sh method [ Found Here ]
Or the ./gfree method [ Found here ]
Either method will work perfectly. I've used both and can say with confidence they work.
The Cyanogen method can be goofy at times. I've see alot of people say they cannot get it working for them. I'd rock one of the two above. You shouldn't have a problem either way.
Thanks a ton for the info, I'll go at it this evening. As far as backup process, I do the temporary root, use ASTRO to make a zip? Most of the data on my phone lives at google, but I'm wondering the best way to retain apps, or should I just make a list and reinstall from the store after flashing?
lars.oakland said:
Thanks a ton for the info, I'll go at it this evening. As far as backup process, I do the temporary root, use ASTRO to make a zip? Most of the data on my phone lives at google, but I'm wondering the best way to retain apps, or should I just make a list and reinstall from the store after flashing?
Click to expand...
Click to collapse
For backing up apps and data, use titanium backup. for backing up your whole phone, use the backup feature in clockworkmod recovery after you've flashed it via rom manager after permarooting.
lars.oakland said:
Thanks a ton for the info, I'll go at it this evening. As far as backup process, I do the temporary root, use ASTRO to make a zip? Most of the data on my phone lives at google, but I'm wondering the best way to retain apps, or should I just make a list and reinstall from the store after flashing?
Click to expand...
Click to collapse
The best way to back up your Data and Applications is like mentioned above is Titanium Backup. The free version will work well but i recommend the paid one.
as far as a snap shot of the entire ROM incase you want to go back to it. reboot into recovery > backup/restore > backup. And it will do the rest.
Well I made it halfway there, but didn't nail the whole thing. I've got permanent root access (yay) now, and was able to make backups via Titanium. I then rebooted the phone into "recovery" using the ROM Manager from Clockwork. First boot had a red exclamation mark, I unplugged the handset from the USB and tried a second time. After that, I was greeted with the Orange and black interface, and selected "restore to factory". I then started searching for the cache clearing, which changed verbage between 3.x and 4.x releases of Clockwork. After exploring the menus a little, the phone reboots itself from this screen. My blood-pressure goes up, and I worry my toy just became a b-word. Not all was lost though, and the phone happily booted into the stock t-mobile welcome wizard.
I still have superUser installed, and still have root (S=OFF I guess?). I install ROM Manager again, and do the "Flash ClockworkMod Recovery" (which now shows both current and latest recovery as ClockworkMod 3.0.2.4). When I choose Reboot into Recovery however, it reboots back to the MyTouch 4G logo screen (non-animated one), and hangs. After some reading I tried to force recovery boot via ADB, which produced the same result as the soft reset from ROM Manager. After that I tried doing it the manual way with holding the volume button, which launched me into what I believe is a stock recovery console (white with colored options, uses vol +/- and power to navigate). Choosing "recovery" from that screen *also* produces the white logo screen hang.
So my question now is, in it's current state; how can I get to the Clockwork recovery again? From there I bet installing the image will be easy street, but I believe I'm stuck for now.
Side-note: the phone functions fine on regular boots and pure vanilla mode; I just don't want to stop here when I'm pretty close to my 2.3 goal
Well good news and bad news. I was able to get Clockwork going by reverting it to 3.0.0.5 and just using that version. Was able to install ROMs, tested a few. Phone started freezing after/during installing packages. Started the clear cache/install ROM process, ran into this:
Code:
Flashing Kernal ...
assert failed: write_raw_image("/tmp/boot.img","boot")
E:Error in /sdcard/download/virtuous_fusion-glacier-rom-v1.0.9.zip
(Status 7)
Installation aborted
http://forum.xda-developers.com/showthread.php?p=14389074
Totally stuck at boot screen, but able to get into Clockwork. All ROM zips off the sdcard produce this or an invalid zip error.
Other guy smight tell you what a status 7 might be, but with the flurry of flashing youre doing, you may have gotten some corruption on your sd
try formatting your sd card in the pc, or use another one so you dont have to back everything up on this one. put one rom zip on the root and see if that helps
also, i would make super sure you wiped/factory resetted every possible data/cache in CWM before flashing the zip
lastly, i would md5 test the download to make sure it matches the web page. Plus, after it's transferred to the cleanly-formetted sd, check it again either thru adb, or do the trans on the pc using an sdcard reader and check it once it's on the sdcard, then pop it into back your phone.
good luck
Thanks a ton for the uber fast reply. When I format on the PC, what format do I use, or is there a specific tool to properly format it for the phone?
When I'm wiping /data it's taking forever and I get the following message back:
Code:
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/log/last_log
E:Can't open /cache/recovery/log/last_log
Don't have an adapter at the office today for the sdcard, but I guess I can just grab a new one at lunch? All it would need is a fresh format then the .zip of the ROM in question at the root?
Looks like your partitions are corrupted. Flash PD15IMG to restore the phone to stock, and progress from there.
When you format the SD card, just format it regularly in the PC.
Jack_R1 said:
Looks like your partitions are corrupted. Flash PD15IMG to restore the phone to stock, and progress from there.
When you format the SD card, just format it regularly in the PC.
Click to expand...
Click to collapse
So I use the same PD15IMG.zip i did to start, flash it using Clockwork, then start the root > rom process over? I think that it currently tells me it can't find that zip anymore on the white screen pre console, is that expected? I just xfer it to the sdcard prior to fixing?
Yes, that's the right procedure. Move it to the card and start from scratch. Beware not to use the newer Panache/MT4G Gingerbread RUU, otherwise you'll be left with no way to root, or at least harder way.
Ok, so I didn't have a PD15IMG.zip to begin with, I see this thread:
http://forum.xda-developers.com/showthread.php?t=1059347
and that's proper that I'm flashing the radio itself for this process? Which of those images do I want to grab? I always like to double check when I read warnings that are pretty specific about bricking the device
No! You're flashing a stock recovery image called a pd15img.zip
The radio does not do a restore to stock, the reason you're confused is that in order to flash a radio for those who nmwish to do that, you rename it to the same name as the recovery zip, but it's really just a radio. It just happens to be the filename that the system looks for to restore. Look for the thread posted by either jjackson or football. That's the full image, just over 300 megabytes, or that neighborhood.
acsi007 said:
No! You're flashing a stock recovery image called a pd15img.zip
The radio does not do a restore to stock, the reason you're confused is that in order to flash a radio for those who nmwish to do that, you rename it to the same name as the recovery zip, but it's really just a radio. It just happens to be the filename that the system looks for to restore. Look for the thread posted by either jjackson or football. That's the full image, just over 300 megabytes, or that neighborhood.
Click to expand...
Click to collapse
Jesus, glad I asked before getting in there.
So I was going to offer you a beer sometime, I think I owe you a few rounds at this point...
Edit: this one right http://forum.xda-developers.com/showthread.php?t=924923 ?
Yup. Read the whole thread. Also look for football,s thread. There are a couple of mentions of undoing gfree first then doing the pd15img. I think jjackson tries to automate those two steps, and football thread just gives you a january-dated pd15img. I can't remember if you rooted gfree or not. Read read read. This is an important step but hundreds have gone back to stock this way without a hitch. That is if you have a good emmc, you have a better chance of avoiding problems...
acsi007 said:
Yup. Read the whole thread. Also look for football,s thread. There are a couple of mentions of undoing gfree first then doing the pd15img. I think jjackson tries to automate those two steps, and football thread just gives you a january-dated pd15img. I can't remember if you rooted gfree or not. Read read read. This is an important step but hundreds have gone back to stock this way without a hitch. That is if you have a good emmc, you have a better chance of avoiding problems...
Click to expand...
Click to collapse
I rooted gfree originally, and think I may be in the bad place
Fail-PU errors running the update from pd15img. Do I have any options at this point? I bought the phone from Wirefly.com, and since I can't get a recovery image going, I may be fuct here on a return eh?
looks like i'm moving to: http://forum.xda-developers.com/showthread.php?p=14487111#post14487111
Good luck Lars. Let us know that they did and if you had to pay.

[Q] A sort of newbie query but...

Hi there,
I had been umming and arring about rooting and installing a new ROM one of my familys HTC Heroes for some time now and finally after reading lots of "How to's" on lots of different forums I decided to take the plunge and give it a go using the guide on here.
Both my wifes phone and my sons phone are sim unlocked Orange HTC Heros running 2.1-Update 1.
Rooting it was easy. One press of a button and I was there. Its pretty much worked OK and I have sucessfully made three backups of the wifes Hero.
My main query and this is the bit I have not really been able to find much info about despite spending a day trawling through the forums looking for similar queries is this:
Having flashed my recovery image file, the first time I reboot I can get into the recovery mode just fine. From here I can make a backup of the current ROM after which the Hero reboots and goes back into the OS as it should.
If I then shut it down and reboot using the HOME key + POWER option It does not go into the recovery mode. I get the screen with an image of the phone next to a red triangle with an exclamation mark in it.
Using the advice from various forums whilst searching for further advice / hints I have left the phone for up to half an hour but it stays on this screen. The only way to get it out of this screen it to pull the battery.
If I then boot up the phone and reflash the recovery image, I can then get into the recovery mode once again but for ONE BOOT ONLY.
I have tried AmonRA Revcovery v1.7.01. and also the Clockwork Recovery 2.5.0.7 images and both produce the same results. I have tried flashing the images via ROM Manager and also via Android Terminal Emulator
My question is this: Do I have to flash the recovery image EVERY time I want to open the recovery mode or is there something I have missed? At present I have held back from installing a new ROM in case I go past a point of no return where I brick the phone. Neither my wife or son would be too pleased despite my son wanting a better ROM on his.
Apologies for writing "War and Peace" but I wanted to make sure I had covered all I could and hope this is a) not a query already posted elswhere which I have missed b)posted in the right place. Apologies to any forum mods if its not.
Regards
Rhinestone.
hmm look on the unlokr.com or something like that. They use some simple passes and it's the way i did it. the on;y difference is that my phone wasn't blocked on a carrier...
1.there is a program that roots the hero's rom
2.after that i recommend installing clockwork recovery mode (it doesn't need signed zips)
3.if you don't feel safe doing this, i recommend to stop... I know that the 2.1 rom is boring but you can end up with a bricked phone after this...
The official 2.1 update has a script that reflashes the stock recovery every time the phone is shut down.
Hunt about for a modified 2.1 rom, all of them have had that script removed. I'm not a huge fan of sense now, but when I did use it, I found villainrom to be a good 2.1 sense rom.
TheReverend210 said:
The official 2.1 update has a script that reflashes the stock recovery every time the phone is shut down.
Hunt about for a modified 2.1 rom, all of them have had that script removed. I'm not a huge fan of sense now, but when I did use it, I found villainrom to be a good 2.1 sense rom.
Click to expand...
Click to collapse
This, just flash a custom ROM and it will stick.
Hello,
Problem might be with rooting, possible it has not been rooted completely or anything messed up. You can try this for rooting.
http://unrevoked.com/
If you are sure its rooted completely, then check out Superuser apps, if its there, and you are rooted, if not then download terminal emulator and type "su" command, if its doesnt display any error then its rooted.
Other then this,
problem might be with the recovery images you are flashing, download droid explorer its a window application, its has an option of flashing recovery with one click, simply choose recovery image & flash it, clockmod recovery or amonr any of this you can get in xda.

[Q] First Post!...with a ton of help needed.

HellllOOooOoOo!!
Ok, here goes. First off, I searched. A lot. There is so much conflicting information and opinions out there. I hate to annoy you pros with noob-ness but I have to. Sorry!
Here is the quick version:
Friend gave me an Atrix 4G. He is big on experimenting, rooting, custom ROMs and all that. I am not. At all. I want to use it on t-mobile. I DO get a signal and can text. MMS doesn't work and motoblur wont let me set up an account. This results in no access to email other then Gmail. Basically, I want to bring the phone back to its original (or close as possible) state. Hopefully, that will solve some of my issues.
-Android Version
2.3.4
-Unlocked
-Rooted
-Build Number
olympus_hktw-userdebug 2.3.4 4.5.2A-5_OLH-3110614 test-keys
-Clockwork recovery mod installed (if that matters)
I am not THAT tech savvy but can follow instructions well. I've already been messing around but cant seem to get RSD Lite to actually flash properly. I dont care for customs ROMS, hacking and tinkering. I just want this phone to work as well as possible.
Can anyone give me some personal assistance? Please? Step by step would be great. I'll be refreshing this page often in hopes of responses.
Vul said:
HellllOOooOoOo!!
Ok, here goes. First off, I searched. A lot. There is so much conflicting information and opinions out there. I hate to annoy you pros with noob-ness but I have to. Sorry!
Here is the quick version:
Friend gave me an Atrix 4G. He is big on experimenting, rooting, custom ROMs and all that. I am not. At all. I want to use it on t-mobile. I DO get a signal and can text. MMS doesn't work and motoblur wont let me set up an account. This results in no access to email other then Gmail. Basically, I want to bring the phone back to its original (or close as possible) state. Hopefully, that will solve some of my issues.
-Android Version
2.3.4
-Unlocked
-Rooted
-Build Number
olympus_hktw-userdebug 2.3.4 4.5.2A-5_OLH-3110614 test-keys
-Clockwork recovery mod installed (if that matters)
I am not THAT tech savvy but can follow instructions well. I've already been messing around but cant seem to get RSD Lite to actually flash properly. I dont care for customs ROMS, hacking and tinkering. I just want this phone to work as well as possible.
Can anyone give me some personal assistance? Please? Step by step would be great. I'll be refreshing this page often in hopes of responses.
Click to expand...
Click to collapse
It sounds like you need to set up a proper T-Mobile APN. (you have a T-Mobile SIM card currently installed?)
If you can get on Wifi, try to go the the Play store and download Tweakker or other APN utilities that enter the APN for your based on your carrier.
co.ag.2005 said:
It sounds like you need to set up a proper T-Mobile APN. (you have a T-Mobile SIM card currently installed?)
Click to expand...
Click to collapse
Yes. I have a t-mobile SIM card installed. My concern is what the previous owner may have done and whatever ROM is loaded on this phone. Can I somehow bring it back to stock or get a super stable, close to stock as possible ROM first and then start addressing the quirks I have?
Is this an AT&T branded phone? I'm not sure if getting back to stock is necessary, and if you do get back to stock, you might be SIM locked to AT&T (I could be wrong however). If you want to flash a fresh, stock ROM but still be rooted, SIM unlocked, etc., find a 2.3.6 Fruitcake in this forum or try NottachTrix 4G ROM.
however, I'd wait till others weighed in before doing anything. Honestly, I'd try getting your APN (download Tweakker app and walk through the steps) going now and if that solves your issue, your ROM might be working fine for you... my $0.02
oh, and welcome to XDA!
Vul said:
Yes. I have a t-mobile SIM card installed. My concern is what the previous owner may have done and whatever ROM is loaded on this phone. Can I somehow bring it back to stock or get a super stable, close to stock as possible ROM first and then start addressing the quirks I have?
Click to expand...
Click to collapse
1. Download the fruitcake .zip you want (webtop also, if you want it)
2. Do a full wipe with fastboot (search if you're unsure how to)
3. Boot into recovery and flash the .zip you downloaded from step 1
4. Reboot and you're done
This will put you back to stock. I can't remember if fruitcakes are pre-rooted, but if not you can easily root again.
Alright, now we're getting somewhere.
co.ag
The phone itself says "unlocked" upon startup. I got the network unlock code direct from AT&T because at first the phone wouldn't even recognize my t-mo SIM. Phone is now network unlocked.
Ghost
gonna search now for fruitcake and see what thats all about. Do I need webtop?
Then going to get fastboot. Guess I dont need RSD Lite anymore?
Im doing this because I dont know what the previous owner has done and would like a clean slate. Kind of like changing the oil on a used car you buy, even if the PO says it was done.
Ok so,
I found fastboot with recovery tool and the .exe files within the ZIP dont do anything.
The fruitcake ZIP file I downloaded according to your link, I'm not sure what to do with that. lol
Help?
**am I supposed to be saving these files to the phone itself? If so, where? Internal storage? SD card?
Vul said:
Alright, now we're getting somewhere.
co.ag
The phone itself says "unlocked" upon startup. I got the network unlock code direct from AT&T because at first the phone wouldn't even recognize my t-mo SIM. Phone is now network unlocked.
Ghost
gonna search now for fruitcake and see what thats all about. Do I need webtop?
Then going to get fastboot. Guess I dont need RSD Lite anymore?
Im doing this because I dont know what the previous owner has done and would like a clean slate. Kind of like changing the oil on a used car you buy, even if the PO says it was done.
Click to expand...
Click to collapse
that "unlocked" bit on start up means your bootloader is unlocked, doesn't have anything to do with the SIM card. All this means is that you can flash a ROM since the phone is "unlocked"
Vul said:
Ok so,
I found fastboot with recovery tool and the .exe files within the ZIP dont do anything.
The fruitcake ZIP file I downloaded according to your link, I'm not sure what to do with that. lol
Help?
**am I supposed to be saving these files to the phone itself? If so, where? Internal storage? SD card?
Click to expand...
Click to collapse
the fruitcake .zip goes on your internal sdcard. BUT, before you start doing anything, please go through the stickied threads in this section and read up on how to flash ROMs to your phone. This will include how to wipe your phone using the fastboot commands and how to flash the fruitcake .zip.
start here, read this post
http://forum.xda-developers.com/showthread.php?t=1154600
then follow guides to
"HOW TO INSTALL FRUITCAKES ON 2.3.4 (GREAT SBF/RSD ALTERNATIVE!!!)"
and
"ROMs & Kernels:
FYI:
Before installing any ROM or Kernel I suggest you do the following to help prevent error, boot-loops, etc. Also, it's a good idea to flash a new ROM or Kernel on a fully charged device:
1) Download which ever ROM or Kernel you plan on flashing and have the .zip on your device ready to flash.
2) Backup your apps (not system data), contacts, etc. Also consider making a CWM backup of your device, just in case.
3) Boot into CWM Recovery
4) Wipe Dalvik Cache (under advanced in CWM)
5) Wipe Cache Partition
6) Wipe data/factory reset
6a) If you're using ROM Manager/CWM you will need to reboot the device after step 5, and upon reboot enter fastboot mode and enter the command: "fastboot -w" or "moto-fastboot -w" if you prefer using moto-fastboot. Then type "fastboot reboot" and upon reboot make sure to enter Android Recovery again, so that you can flash the ROM/Kernel.
7) Install .zip from SD Card (choose the .zip you wish to install)
8) If you installing a radio, theme, kernel, etc. on top of a ROM, I would suggest redoing the whole wipe process again between flashes.
9) Reboot the Device
- If you get a boot loop, try entering Android recovery and re-wiping the chace and data, and perhaps try reflashing the ROM/Kernel. Or if you made a CWM backup, you can always restore that."
Vul said:
Ok so,
I found fastboot with recovery tool and the .exe files within the ZIP dont do anything.
The fruitcake ZIP file I downloaded according to your link, I'm not sure what to do with that. lol
Help?
Click to expand...
Click to collapse
Ok, sorry I wasn't that detailed in my other post and assumed you were on your phone (my bad). First things first, read the N00b guide.
1. Anytime you download CWM .zips, put them on the root of your phone's sdcard. You'll need them there in order access them from recovery. ( note: sdcard=internal sd card & sdcard-ext=external sd card for blur ROMS )
2. Fastboot commands are executed from the command line. Open a command prompt and navigate to the directory containing fastboot.exe in order to use it. The Noob guide should have links to all the fastboot commands you'll need.
3. With the Atrix's unlocked BL, holding Volume Down when turning the phone on will bring up a series of bootmodes to choose from. This is how you get into fastboot, recovery, RSD, etc. Navigate through the choices with Volume Down. Select one by pressing Volume Up. You should only ever really need Fastboot and Android Recovery.
4. CWM is used to flash .zips (ROMS, kernels, apps) while in recovery mode. Use romracer's to make things easier on yourself later.
Read through the N00b guide and this will all make perfect sense.
I have no idea what Im doing. I think because this phone has been tampered with so much already, it's making it extra tough to work with.
I managed to install CM7. Its the only ZIP file that actually seemed to take. I still dont understand fastboot , in the sense that I don;t know when Im supposed to see a command prompt. Also, now, CM7 is asking me to upgrade to premium and I have to pay for it. There doesnt seem to be a free way of installing it so that I can sync all my info through my google account. Ugh. Im not cut out for this but Ive been screwing with this literally since 730 this morning.
**CM7 with google apps packet installed. So far, so good. Im happy with this considering its pretty close to stock gingerbread, kinda like my G2. Now, Im hopefully done messing around. Would be nice if they release a solution for the fingerprint scanner or if I can get my gmail to auto sync but at least I can stop obsessing for the time being. Great help guys, thanks so much!!!!

Categories

Resources