As the thread title states, I'm looking for info on the steps to root my stock MT4g, and install the new ROM that's floating around. I'm pretty technically capable, but the info I've found looks slightly dated. When I was active in the iPhone jailbreak scene, using old directions could brick a phone pretty easy, or prevent future jailbreaking. I haven't kept up with this scene enough to be able to know what's dated and what isn't.
This is my current plan, please correct it if I'm missing anything or have it wrong.
(based on wiki.cyanogenmod.com/index.php?title=TMobile_myTouch_4G:_Full_Update_Guide)
I've got ADB going
I need a backup solution for app data right? What's my best option here?
Once backed up, I plan to install busybox, Superuser package & Temporary Root package via ADB
Use gfree to make that root permanent
Install ClockworkMod recovery
Reboot into recovery, and install faux123's ROM
Does that sound correct, and did I skip anything? Any input at all is welcome, I'd like to stand tall on the backs of giants.
There are two popular methods floating around
You can either use the Root.sh method [ Found Here ]
Or the ./gfree method [ Found here ]
Either method will work perfectly. I've used both and can say with confidence they work.
The Cyanogen method can be goofy at times. I've see alot of people say they cannot get it working for them. I'd rock one of the two above. You shouldn't have a problem either way.
Thanks a ton for the info, I'll go at it this evening. As far as backup process, I do the temporary root, use ASTRO to make a zip? Most of the data on my phone lives at google, but I'm wondering the best way to retain apps, or should I just make a list and reinstall from the store after flashing?
lars.oakland said:
Thanks a ton for the info, I'll go at it this evening. As far as backup process, I do the temporary root, use ASTRO to make a zip? Most of the data on my phone lives at google, but I'm wondering the best way to retain apps, or should I just make a list and reinstall from the store after flashing?
Click to expand...
Click to collapse
For backing up apps and data, use titanium backup. for backing up your whole phone, use the backup feature in clockworkmod recovery after you've flashed it via rom manager after permarooting.
lars.oakland said:
Thanks a ton for the info, I'll go at it this evening. As far as backup process, I do the temporary root, use ASTRO to make a zip? Most of the data on my phone lives at google, but I'm wondering the best way to retain apps, or should I just make a list and reinstall from the store after flashing?
Click to expand...
Click to collapse
The best way to back up your Data and Applications is like mentioned above is Titanium Backup. The free version will work well but i recommend the paid one.
as far as a snap shot of the entire ROM incase you want to go back to it. reboot into recovery > backup/restore > backup. And it will do the rest.
Well I made it halfway there, but didn't nail the whole thing. I've got permanent root access (yay) now, and was able to make backups via Titanium. I then rebooted the phone into "recovery" using the ROM Manager from Clockwork. First boot had a red exclamation mark, I unplugged the handset from the USB and tried a second time. After that, I was greeted with the Orange and black interface, and selected "restore to factory". I then started searching for the cache clearing, which changed verbage between 3.x and 4.x releases of Clockwork. After exploring the menus a little, the phone reboots itself from this screen. My blood-pressure goes up, and I worry my toy just became a b-word. Not all was lost though, and the phone happily booted into the stock t-mobile welcome wizard.
I still have superUser installed, and still have root (S=OFF I guess?). I install ROM Manager again, and do the "Flash ClockworkMod Recovery" (which now shows both current and latest recovery as ClockworkMod 3.0.2.4). When I choose Reboot into Recovery however, it reboots back to the MyTouch 4G logo screen (non-animated one), and hangs. After some reading I tried to force recovery boot via ADB, which produced the same result as the soft reset from ROM Manager. After that I tried doing it the manual way with holding the volume button, which launched me into what I believe is a stock recovery console (white with colored options, uses vol +/- and power to navigate). Choosing "recovery" from that screen *also* produces the white logo screen hang.
So my question now is, in it's current state; how can I get to the Clockwork recovery again? From there I bet installing the image will be easy street, but I believe I'm stuck for now.
Side-note: the phone functions fine on regular boots and pure vanilla mode; I just don't want to stop here when I'm pretty close to my 2.3 goal
Well good news and bad news. I was able to get Clockwork going by reverting it to 3.0.0.5 and just using that version. Was able to install ROMs, tested a few. Phone started freezing after/during installing packages. Started the clear cache/install ROM process, ran into this:
Code:
Flashing Kernal ...
assert failed: write_raw_image("/tmp/boot.img","boot")
E:Error in /sdcard/download/virtuous_fusion-glacier-rom-v1.0.9.zip
(Status 7)
Installation aborted
http://forum.xda-developers.com/showthread.php?p=14389074
Totally stuck at boot screen, but able to get into Clockwork. All ROM zips off the sdcard produce this or an invalid zip error.
Other guy smight tell you what a status 7 might be, but with the flurry of flashing youre doing, you may have gotten some corruption on your sd
try formatting your sd card in the pc, or use another one so you dont have to back everything up on this one. put one rom zip on the root and see if that helps
also, i would make super sure you wiped/factory resetted every possible data/cache in CWM before flashing the zip
lastly, i would md5 test the download to make sure it matches the web page. Plus, after it's transferred to the cleanly-formetted sd, check it again either thru adb, or do the trans on the pc using an sdcard reader and check it once it's on the sdcard, then pop it into back your phone.
good luck
Thanks a ton for the uber fast reply. When I format on the PC, what format do I use, or is there a specific tool to properly format it for the phone?
When I'm wiping /data it's taking forever and I get the following message back:
Code:
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/log/last_log
E:Can't open /cache/recovery/log/last_log
Don't have an adapter at the office today for the sdcard, but I guess I can just grab a new one at lunch? All it would need is a fresh format then the .zip of the ROM in question at the root?
Looks like your partitions are corrupted. Flash PD15IMG to restore the phone to stock, and progress from there.
When you format the SD card, just format it regularly in the PC.
Jack_R1 said:
Looks like your partitions are corrupted. Flash PD15IMG to restore the phone to stock, and progress from there.
When you format the SD card, just format it regularly in the PC.
Click to expand...
Click to collapse
So I use the same PD15IMG.zip i did to start, flash it using Clockwork, then start the root > rom process over? I think that it currently tells me it can't find that zip anymore on the white screen pre console, is that expected? I just xfer it to the sdcard prior to fixing?
Yes, that's the right procedure. Move it to the card and start from scratch. Beware not to use the newer Panache/MT4G Gingerbread RUU, otherwise you'll be left with no way to root, or at least harder way.
Ok, so I didn't have a PD15IMG.zip to begin with, I see this thread:
http://forum.xda-developers.com/showthread.php?t=1059347
and that's proper that I'm flashing the radio itself for this process? Which of those images do I want to grab? I always like to double check when I read warnings that are pretty specific about bricking the device
No! You're flashing a stock recovery image called a pd15img.zip
The radio does not do a restore to stock, the reason you're confused is that in order to flash a radio for those who nmwish to do that, you rename it to the same name as the recovery zip, but it's really just a radio. It just happens to be the filename that the system looks for to restore. Look for the thread posted by either jjackson or football. That's the full image, just over 300 megabytes, or that neighborhood.
acsi007 said:
No! You're flashing a stock recovery image called a pd15img.zip
The radio does not do a restore to stock, the reason you're confused is that in order to flash a radio for those who nmwish to do that, you rename it to the same name as the recovery zip, but it's really just a radio. It just happens to be the filename that the system looks for to restore. Look for the thread posted by either jjackson or football. That's the full image, just over 300 megabytes, or that neighborhood.
Click to expand...
Click to collapse
Jesus, glad I asked before getting in there.
So I was going to offer you a beer sometime, I think I owe you a few rounds at this point...
Edit: this one right http://forum.xda-developers.com/showthread.php?t=924923 ?
Yup. Read the whole thread. Also look for football,s thread. There are a couple of mentions of undoing gfree first then doing the pd15img. I think jjackson tries to automate those two steps, and football thread just gives you a january-dated pd15img. I can't remember if you rooted gfree or not. Read read read. This is an important step but hundreds have gone back to stock this way without a hitch. That is if you have a good emmc, you have a better chance of avoiding problems...
acsi007 said:
Yup. Read the whole thread. Also look for football,s thread. There are a couple of mentions of undoing gfree first then doing the pd15img. I think jjackson tries to automate those two steps, and football thread just gives you a january-dated pd15img. I can't remember if you rooted gfree or not. Read read read. This is an important step but hundreds have gone back to stock this way without a hitch. That is if you have a good emmc, you have a better chance of avoiding problems...
Click to expand...
Click to collapse
I rooted gfree originally, and think I may be in the bad place
Fail-PU errors running the update from pd15img. Do I have any options at this point? I bought the phone from Wirefly.com, and since I can't get a recovery image going, I may be fuct here on a return eh?
looks like i'm moving to: http://forum.xda-developers.com/showthread.php?p=14487111#post14487111
Good luck Lars. Let us know that they did and if you had to pay.
Related
Hello everyone,
(Note, I did do a nandroid backup before I did ANYTHING, right after rooting)
I was having some issues with Modaco 1.0 when it was first put out, and like everyone else, got trapped in a reboot loop. Once I saw that the fix was repartitioning to FAT32, I did so, re-flashed the ROM, and I was back in. All was good.
But when 1.1 came out, I really wanted to restore to my backup to start fresh with the new ROM, but it did not work out. When I tried to do so in the recovery console, I got this error - Error: "nandroid-mobile.sh restore" from console! -
What am I supposed to do with that? I went ahead and went through with 1.1, but I am worried I accidentally closed my backdoor at some point. I noticed I lost some things from the basic ROM (such as the default wallpapers, and I had issues with Google Maps), and I am just generally worried something is fishy in there.
Any suggestions?
lorsoblu said:
Hello everyone,
(Note, I did do a nandroid backup before I did ANYTHING, right after rooting)
I was having some issues with Modaco 1.0 when it was first put out, and like everyone else, got trapped in a reboot loop. Once I saw that the fix was repartitioning to FAT32, I did so, re-flashed the ROM, and I was back in. All was good.
But when 1.1 came out, I really wanted to restore to my backup to start fresh with the new ROM, but it did not work out. When I tried to do so in the recovery console, I got this error - Error: "nandroid-mobile.sh restore" from console! -
What am I supposed to do with that? I went ahead and went through with 1.1, but I am worried I accidentally closed my backdoor at some point. I noticed I lost some things from the basic ROM (such as the default wallpapers, and I had issues with Google Maps), and I am just generally worried something is fishy in there.
Any suggestions?
Click to expand...
Click to collapse
Your Nandroid backup was on that SDcard...I don't suppose you saved it before formatting it?
lorsoblu said:
Hello everyone,
(Note, I did do a nandroid backup before I did ANYTHING, right after rooting)
I was having some issues with Modaco 1.0 when it was first put out, and like everyone else, got trapped in a reboot loop. Once I saw that the fix was repartitioning to FAT32, I did so, re-flashed the ROM, and I was back in. All was good.
But when 1.1 came out, I really wanted to restore to my backup to start fresh with the new ROM, but it did not work out. When I tried to do so in the recovery console, I got this error - Error: "nandroid-mobile.sh restore" from console! -
What am I supposed to do with that? I went ahead and went through with 1.1, but I am worried I accidentally closed my backdoor at some point. I noticed I lost some things from the basic ROM (such as the default wallpapers, and I had issues with Google Maps), and I am just generally worried something is fishy in there.
Any suggestions?
Click to expand...
Click to collapse
nah. The happens sometimes. Could be your nandroid backup got corrupted or you are low on battery power. Two most common causes. I would make sure the nandroid backup is on the sd card. if so, simply try plugging it in to a power supply. Let us know if you get it working.
All right... I did not want to admit it but I believe what you said is probably true, and I either corrupted or simply deleted the nandroid backup during all the flashing and repartitioning. I am not seeing it at all when I mount the SD card. It crossed my mind a little too late that I should have pulled it off the card.
What are my options here? On the one hand, it is working fine for now. I had just got the Hero earlier that day (did an exchange due to dead pixels and network issues), so it was not like I lost anything important. Is there an easy way for me to go all the way back, such as flashing the original ROM to the phone, and essentially starting over, like I just opened the box and turned the phone on? That way I can do it right from the very beginning. I just worry that in all my partitioning things got scrambled, and I am not seeing the repercussions from it yet, other than Google Maps.
ftp://xda:[email protected]_Hero_C_Sprint_1.29.651.1_signed_release.exe
if at first you try and fail.... try try agian
Thanks for the link.
Is there some process to this? I mean, I understand the whole update.zip concept of flashing the ROM, but would I also need to do a complete wipe of the SD card to achieve the fresh start I am looking for? Should I partition it at only FAT32, or go ahead and setup the ext2 partition before flashing the original ROM?
lorsoblu said:
Thanks for the link.
Is there some process to this? I mean, I understand the whole update.zip concept of flashing the ROM, but would I also need to do a complete wipe of the SD card to achieve the fresh start I am looking for? Should I partition it at only FAT32, or go ahead and setup the ext2 partition before flashing the original ROM?
Click to expand...
Click to collapse
convert sd card to "SDPART:fat32 only" from custom recovery
et the official RUU wipe your phone
enable USB debugging in settings>applications
reroot your phone using asroot exploit
make any partition changes you want
do a nandroid backup
do a nandroid restore to verify it works
backup on your workstation /sdcard/nandroid
DO NOT TOUCH YOUR SD PARTITION TYPE AT THIS POINT
get to modding in confidence
johnsongrantr said:
convert sd card to "SDPART:fat32 only" from custom recovery
et the official RUU wipe your phone
enable USB debugging in settings>applications
reroot your phone using asroot exploit
make any partition changes you want
do a nandroid backup
do a nandroid restore to verify it works
backup on your workstation /sdcard/nandroid
DO NOT TOUCH YOUR SD PARTITION TYPE AT THIS POINT
get to modding in confidence
Click to expand...
Click to collapse
All right, I am having issues already, from the very beginning.
The RUU ROM .exe will not recognize the HTC Hero. It throws an error 170 at the step where it is trying to pull information from the phone. I think this has something to do with ADB, and the fact the computer did not have the SDK on it. (I originally set up the root with my Mac.)
So, where do I go? I have a Boot Camp partition and another computer both running Windows 7, but my attempts to put the SDK on those computers and then have the phone drivers properly recognized failed on both, and the .exe still cannot complete. Is there something I am missing here, or can I somehow do this on the Mac side? I'll take anything!
Edit: Just cause I can see someone asking, yes, I tried to do this on both of my Windows 7 computers, not the Mac. I recognized that the .exe would not run on OSX pretty quickly.
can you put your phone into fastboot (power+vol down) and get to the point where windows basically sees your phone
what you are looking for is when you type adb devices it shows your hero
fastboot might not work because it's a seperate program but try custom recovery main menu.... enable usb.... or something to that extent
I appologize I don't have my main computer in front of me so I can't tell you EXACTLY where to go
once I do, I'll find which one to hit.... it does work though because I had to do the same thing with my godly preaching of backups :blush:
it's one of the recovery areas though i promise
fastboot will see the hero as the same device as adb will in fastboot
adb will see the hero as recovery device in custom recovery
attempt both of these I'm certain one of these work
if absolutely all else fails.... after you "install" sprint ruu search your computer for rom.zip it should be in your START>RUN>%TEMP% in here somewhere
rename rom.zip it to HERCIMG.ZIP and put it at root of your sd card and boot into hboot and it should automatically find it and press action to flash it
I'll give some of that a shot. I can confirm that adb devices was not showing the hero connected cause I tested that, so I have a feeling correcting that is my primary concern. What happened when I connected the Hero the first time was that it applied the drivers, but it could not find the ADB one, even after I added the SDK. So if anyone knows what that means (Windows 7 doesn't really give you an easy way to point and say, "Hey, I know what you are looking for, it's right here!" apparently, at least I haven't found it) it would be appreciated.
lorsoblu said:
I'll give some of that a shot. I can confirm that adb devices was not showing the hero connected cause I tested that, so I have a feeling correcting that is my primary concern. What happened when I connected the Hero the first time was that it applied the drivers, but it could not find the ADB one, even after I added the SDK. So if anyone knows what that means (Windows 7 doesn't really give you an easy way to point and say, "Hey, I know what you are looking for, it's right here!" apparently, at least I haven't found it) it would be appreciated.
Click to expand...
Click to collapse
go to htc's website and get htc sync under support>sprint hero it has the drivers built in.... should fix driver issue
johnsongrantr said:
go to htc's website and get htc sync under support>sprint hero it has the drivers built in.... should fix driver issue
Click to expand...
Click to collapse
Hey, that did the trick! Currently flashing with the official ROM right now. Thanks for all the help! FINALLY, I will get to do this right!
lorsoblu said:
Hey, that did the trick! Currently flashing with the official ROM right now. Thanks for all the help! FINALLY, I will get to do this right!
Click to expand...
Click to collapse
glad to be of assistance
johnsongrantr said:
glad to be of assistance
Click to expand...
Click to collapse
Actually, I do have one more question.
Following your instructions back on page 1, wouldn't I want to make the nandroid backup BEFORE repartition to fat32+ext2, so I could recover it all the way back to the standard ROM without partition alterations? Or is it necessary for me to repartition before creating a backup?
lorsoblu said:
Actually, I do have one more question.
Following your instructions back on page 1, wouldn't I want to make the nandroid backup BEFORE repartition to fat32+ext2, so I could recover it all the way back to the standard ROM without partition alterations? Or is it necessary for me to repartition before creating a backup?
Click to expand...
Click to collapse
you'd think so.... but from my own experience if you do a backup on a partititon then convert it... it screws with the backup and you can't recover from it.... just in case... do 2 backups.... store the normal fat32 nandroid backup on your workstation (the entire nanddroid folder) and copy it back to sd after you convert it to fat32+ext2 .... you'll see what I'm talking about....
I don't quite understand why it does that... but for me I was only successful in recovering from a partition that I made a backup to not copied to (if that makes any sence)
also if you don't want to experiement yet... just leave it fat32... you can always change it later after you see it working (sorta confidence builder before tinkering)
lorsoblu said:
Actually, I do have one more question.
Following your instructions back on page 1, wouldn't I want to make the nandroid backup BEFORE repartition to fat32+ext2, so I could recover it all the way back to the standard ROM without partition alterations? Or is it necessary for me to repartition before creating a backup?
Click to expand...
Click to collapse
Think about it this way, you do a nandroid backup...it places it on the sdcard.
Then you go and change the format of the sd card (potentially blowing away or corrupting any data on it, including the nandroid backup you just made).
Thus why it's better to do it afterwards (besides, nandroid doesn't back up your sd card, just your phone's OS and such)
solved for me
i had that problem its cuz the back up is brocken get anthoer copy of it if u hav 1 then restore it again it worked for me
Apologies for this stupid question resulting from a stupid mistake. Hoping somebody will be able to walk me through getting out of this.
I successfully rooted my sprint hero, then loaded modaco 3.0 (yes now I know that was bad). On reboot, the phone hangs on the black htc screen, and will respond to nothing.
The only thing I've been able to do is remove the battery, then turn it on in recovery mode. There, I did a wipe data/restore factory setting. Then I rebooted - and got the same boot screen, same problem.
Second try: wiped, toggled to usb, and replaced the 3.0 update.zip with the 1.1 for CDMA, tried to flash it, got this:
can't open /sdcard/update.zip (bad)
When I try to restore, I get these:
(bart) error: run bart via adb
(nandroid) can't open file
Please help! I am out of ideas. Thanks very much in advance.
you'll probably have to take it back to the very beginning......
Get the Sprint RUU stock rom (a couple of posts below this one) and run that
then re-root your hero
Flash one of the roms ON THIS BOARD ONLY!!! Any other Hero rom is meant for the GSM version so it will give you the same headache again.
thanks
Thanks for the quick response! I'll try that.
Hmm, not looking good here. When I tried to install the stock hero RUU I got this error:
no signature
verification failed
which I presume is related to the htc sync requirement for that rom in the unrooting procedure that I did earlier.
Any idea for working around that?
So you used RUU_Hero_C_Sprint_1.29.651.1_signed_release.exe? If not, here is a link to it: link.
david.danaan said:
Second try: wiped, toggled to usb, and replaced the 3.0 update.zip with the 1.1 for CDMA, tried to flash it, got this:
can't open /sdcard/update.zip (bad)
Click to expand...
Click to collapse
Don't use 1.1, grab a later one.
Which recovery? 1.5.x won't let you go back to the main menu without disabling USB-MS again... I don't remember what 1.2.3 did. If worse comes to worst, reboot the phone after copying the file.
gu1dry said:
So you used RUU_Hero_C_Sprint_1.29.651.1_signed_release.exe? If not, here is a link to it: link.
Click to expand...
Click to collapse
Yes, that's the one.
Using recovery 1.5.1. I can try a later rom, see if that works. I think I downloaded 1.3.
So first off yes, you aren't booting past the HTC screen because you flashed the wrong rom. However you aren't bricked. It's almost impossible to do once you're rooted and have RA's recovery installed unless you flash radios and stuff which you shouldn't.
Explanations for your other problems:
1. RUU doesn't work on the phones that are coming from the factory with 1.56. http://geekfor.me/news/sprint-ruu-fails/
There is a possible work-around but it's pretty detailed and I haven't gotten it to work. But you don't need to RUU if you can get in to RA.
2) (nandroid) can't open file is likely caused by RA 1.5.1. It had a bug that corrupted the backups. 1.5.2 is out. But for now don't worry about that cause your backup already sounds corrupted, nothing you can do.
3) can't open /sdcard/update.zip (bad). To me that sounds like your update was just corrupted.
How to fix it:
1. Boot in to recovery. With phone powered off hold your home button and then power.
2. Download fresh rom from http://geekfor.me/new-release/fresh-rom-1-0/ (what can I say... I'm partial. )
3. Within RA enable USB toggle and copy fresh rom to the root of your sdcard. Don't worry about renaming it to update.zip
4. Disable usb toggle. Go to flash zip from SD and choose fresh. That should be it. If you get the error saying the zip is bad then compare your downloaded copy with the md5 hash check on the download page (google it if you aren't sure how). If it matches then it's possible you have a bad sdcard. If it doesn't match then your downloads are crappy.
working!
Got it working by flashing the modaco v1.3a - must have been a bad update.zip before like you said. Thank you so much for the help and clear explanations, I was really worried I had bricked it.
David, now that it is working, I would recommend updating your recovery to 1.5.2.
I just want to thank everyone that posted to this reply I honestly thought that I bricked my phone and thank to you guys I was able to revive it. Thank you again.
You know the guy I'm talking about: while he's sitting in the VD clinic with an itchy crotch, he's praying to God: "Oh God, please don't let it be herpes. If it's not herpes I swear I won't visit another whorehouse as long as I live."
Then, as soon as the doctor announces that he's just got a case of jock itch and he should put some anti-fungal on it, the guy runs to the whorehouse to celebrate....
Because, see, just a few days ago I semi-bricked my Evo running after a failed Unrevoked. Not sure why it failed, but the phone would lock up every 15 seconds. So I flashed a stock image to repair the damage, and then a newer one, and wound up with a phone that worked except it wouldn't read the SD card or USB port (charging would only occur if the phone was turned off).
So as I was working my way through the fix I kept promising myself that if I got it fixed I'd just keep it stock unrooted and be happy with it.
Then, thanks to the good fold here, I managed to get the device running again the way it should. Wheeew, I thought, I'm happy now.
But... of course... it only took a few hours before the "root" itch hit me again. Fixing the semi-brick issue required installing z4root, and that app gave me a taste of da root acces... and ooooh did it taste goooood! Problem with z4root, though is that you're still s-on, and it's my understanding that if you're s-on and take the new GB update, you're SOL (at least for the time being). And I wanted to be s-off for the peace of mind it offered.
So my desire for real permanent root got the better of me. I decided that the reason unrevoked had failed for me the first time probably had something to do with all the cr*p I had installed on my phone. So I used Titanium backup along with z4root to back up the stuff I'd installed since getting my phone back and re-flashed the stock 2.2 image that had worked for me, and started with afresh phone.
Tried unrevoked one more time and... viola! It worked!!!
I'm happy now... a happy, unrepentant sinner!
Anyway, if you've read through all this: bless you.
I do have a couple of questions:
1) Am I correct that being s-off means I can now install unsigned ROMs the same way I installed the stock image I am on? (basically, rename it PC36IMG.zip, put it on the root of the SD card and boot into the bootloader and let it install)?
2) do I need to run "unrevoked forever"? I'm not clear on this. Getting some conflicting information from searching. My best guess, from what I've read, is that the latest unrevoked includes all the stuff that unrevoked forever does.
-Is blessed-
1. You don't need to make a PC36IMG to flash a rom; just download the file, then backup your current rom, do a full wipe, then flash the rom zip
2. You don't need to flash the forever zip; it was used to give you nand unlock -s-off- in the older versions of unrevoked, and was incorporated into the new one.
And keep applying that jock itch.
And once you flash a couple roms, you will get the itch to start using the kitchen and playing with your own custom rom, its only a matter of time, lol
I probably try two a week now. Its amazing how much work these guys do.
Unrevoked forever is incorporated in Unrevoked now. So need for that.
Also, you dont flash them in the bootloader. Boot into the bootloader, then use volume down to go down to the option that says "recovery" then use the power button to select. It will boot into recovery menu which should have a list of options, go down to flash zip from sdcard, then select zip from sdcard. It will show you a list of everything on your sdcard. Navigate to wherever your rom .zip file is that you downloaded and select it. It will ask you if you want to flash, select yes.
PS dont forget to wipe before you flash. ("Wipe all user data/factory reset" option when your in recovery.)
RileyGrant said:
Unrevoked forever is incorporated in Unrevoked now. So need for that.
Also, you dont flash them in the bootloader. Boot into the bootloader, then use volume down to go down to the option that says "recovery" then use the power button to select. It will boot into recovery menu which should have a list of options, go down to flash zip from sdcard, then select zip from sdcard. It will show you a list of everything on your sdcard. Navigate to wherever your rom .zip file is that you downloaded and select it. It will ask you if you want to flash, select yes.
PS dont forget to wipe before you flash. ("Wipe all user data/factory reset" option when your in recovery.)
Click to expand...
Click to collapse
OK, so that's pretty much the same as with the Nook flashing Phiremod (a Cyanogenmod variant).
Last summer I rooted my color Nook using Auto Nooter 2.1. I plan to give this Nook to a family member and I am struggling to return this to it's factory settings. I have read and watch the instructions provided by The uNlockr-How to Restore the Nook to it's Factory settings. I get as far as flashing the SD card, however that's where things take a left turn. The file names on the downloads they describe are not in the current downloads I can find. I have downloaded and flashed the img file for 4gb_clockwork-0.7.tar.gz. When I look for the actual Nook restore files every discussion thread leads me to here: http://forum.xda-developers.com/showpost.php?p=22809801&postcount=148 I've downloaded the large 200+MB file, extracted it... however none of the file names match the instruction per unlockr or the video:
Where am I going wrong? I have spent nearly 4 hours trying to navigate this Chinese maze? I'm sure that I have overlooked something but at this point I can't see it.
Any help to get me to this final destination I would greatly appreciate. I have a deadline of Monday afternoon to get this root righted.
Have you tried this?
http://forum.xda-developers.com/showthread.php?t=1461172
HB
wheresgrant said:
Last summer I rooted my color Nook using Auto Nooter 2.1. I plan to give this Nook to a family member and I am struggling to return this to it's factory settings. I have read and watch the instructions provided by The uNlockr-How to Restore the Nook to it's Factory settings. I get as far as flashing the SD card, however that's where things take a left turn. The file names on the downloads they describe are not in the current downloads I can find. I have downloaded and flashed the img file for 4gb_clockwork-0.7.tar.gz. When I look for the actual Nook restore files every discussion thread leads me to here: http://forum.xda-developers.com/showpost.php?p=22809801&postcount=148 I've downloaded the large 200+MB file, extracted it... however none of the file names match the instruction per unlockr or the video:
Where am I going wrong? I have spent nearly 4 hours trying to navigate this Chinese maze? I'm sure that I have overlooked something but at this point I can't see it.
Any help to get me to this final destination I would greatly appreciate. I have a deadline of Monday afternoon to get this root righted.
Click to expand...
Click to collapse
First off... the files you download from the thread above are CWM installable.... don't extract them... place the one you want to use on uSD and flash it... After you flash it... the Power + n boot will return to factory with 1.4.1 update installed.
Dizzy... Sincere thanks. Am I to assume that I should select the file romrestore.zip ? again all of the directions I've followed none have mentioned the use of this particular file. To make matters worse I downloaded a zip of nook-complete-restore-1.0.1.zip and the file is completely corrupted. I can't find a 1.4.1 version of the complete restore on available servers.
OK... my guess is that it not the correct file. I move the romrestore.zip to the nook power+ Nboot. reformatted system & data... fine. Installed romrestore.zip. "assert failed E:Error in sdcard/romrestore.zip. Installation aborted. Can someone give guidance on the correct file to install and where to find it?
You do not need the romrestore.zip.... just flash the file you downloaded from post 148 in the other thread... then if you reboot into stock recovery with power + n it will do the reset factory data.
The romrestore.zip file you are referring to was written to replace cwm recovery files with 1.0 stock recovery files... this is done with the 1.4.1 files I put together with that versions files.
Dizzy,
I appreciate you being patient with me but something is getting lost in the translation. Is this used in conjunction with the 4gb_clockwork-0.7img? I've used that to flash the SD card first. Then I've moved the entire 202MB nookcolor_1_4_1.zip to the SD card. Upon Power +nboot I come back to the same menu of options asking me whether I want to apply sdcard/update.zip. Each time the installation fails.
I fear I am mixing processes and files that don't belong together. Can you please just give me the simple steps (or point to them... post 148 doesn't explain what to do with those files). I'm batting 0 for 12 right now.
You sure are making this hard. If you will read the thread I linked in post#2 you will see just how easy it is.
It will take you back to whatever that Nook shipped with. Mine goes back to v1.3, my BIL's goes back to 1.0.0. Upgrades from there should happen automagically.
Your right. I was making this harder than what it was. I did take your advice and I tried the 3-finger reboot method. Eventually I was able to boot to the factory rom... but here is the kicker... the nook must be plugged into it's power supply (not running on it's battery) to hard reboot. Again, Google is both thy enemy and thy friend. I understand hacking doesn't come with a manual and these forums exist for the benefit of the community, by the community, but I've found so many incomplete instructions, bad file links, corrupted files... well I'm not really sure anyone can say they have the firmest handle on this procedure.
It's done though... and for the advice given here I'm grateful.
wheresgrant said:
Your right. I was making this harder than what it was. I did take your advice and I tried the 3-finger reboot method. Eventually I was able to boot to the factory rom... but here is the kicker... the nook must be plugged into it's power supply (not running on it's battery) to hard reboot. Again, Google is both thy enemy and thy friend. I understand hacking doesn't come with a manual and these forums exist for the benefit of the community, by the community, but I've found so many incomplete instructions, bad file links, corrupted files... well I'm not really sure anyone can say they have the firmest handle on this procedure.
It's done though... and for the advice given here I'm grateful.
Click to expand...
Click to collapse
Glad it helped.
And for the record I have done this to 2 different Nooks more than one time and never had it plugged into the charger. It IS important to make sure you have a full battery before doing these things.
The good news is that it worked!
HB
Grant... to answer your question... yes the files to flash 1.4.1 from CWM would be flashed from CWM (your clockwork imaged uSD)... you would just put the file on the uSD and boot it in the nook... install zip from card... select the file and let it flash... when its done flashin... power on holding n... allow it to do its thing and you'd be at factory 1.4.1.
The benefit of this method was you didn't have to flash to original and update... but since 1.4.2 has come out it would have to update anyway.
Harrybub... when I do the three finger way, my nook brings up ClockworkMod Recovery v3.2.0.1
I need to reset factory settings, but this came up two times that I was successful with the 8 interrupted boot.
The third time, I just chose the (wipe data/factory reset) in Clockword Mod recovery. Now it just boots up into recovery
Help?
gryphon101 said:
Harrybub... when I do the three finger way, my nook brings up ClockworkMod Recovery v3.2.0.1
I need to reset factory settings, but this came up two times that I was successful with the 8 interrupted boot.
The third time, I just chose the (wipe data/factory reset) in Clockword Mod recovery. Now it just boots up into recovery
Help?
Click to expand...
Click to collapse
See the post right above your's.
I just started over, found I had a corrupted cwm, maybe... Also had Rom zip and GAPPs zip on the same card. Redid everything using cwm image on one card, then zips on a separate card. That did it!
gryphon101 said:
I just started over, found I had a corrupted cwm, maybe... Also had Rom zip and GAPPs zip on the same card. Redid everything using cwm image on one card, then zips on a separate card. That did it!
Click to expand...
Click to collapse
Just an FYI... having both zips on the card is not an issue... common practice is to have them both, along with other zips on the CWM bootable uSD... you just have to make sure of what zip you are installing from uSD.
I need help! I need a stock, unmodified recovery partition image.
Anyone here with a vzw tab who DOES NOT yet have CWM installed?.
PLEASE contact me.
Thanks!
electron73 said:
I need help! I need a stock, unmodified recovery partition image.
Anyone here with a vzw tab who DOES NOT yet have CWM installed?.
PLEASE contact me.
Thanks!
Click to expand...
Click to collapse
I have one that hasn't been moded but have no idea how to get you what you want. PM me if you know how to download and send to you and I'll do my best to help.
I'll check my laptop at home tonight. I believe I kept my heimdall backup before flashing cwm
Sent from my DROID BIONIC using Tapatalk 2
Just checked, mightve deleted it. Sorry man
aximtreo said:
I have one that hasn't been moded but have no idea how to get you what you want. PM me if you know how to download and send to you and I'll do my best to help.
Click to expand...
Click to collapse
Oh that would be awesome! Are you rooted? Let me find the commands in the meantime, I read somewhere it's a simple one command in terminal to extract the recovery partition into a file on sd card...
WHAT AN ORDEAL !!!!
But in the end: SUCCESS!
I managed to get my tab updated with the Verizon OTA update.
The problem is definitely CWM !!! A rude awakening is in store for everyone with the P6800 CWM installed, because it a) fails to verify the checksum of OTA files correctly on the i815, b) it thinks the tablet is a P6800, so the OTA file fails to run if it assert checks for "SCH-i815" hardware AND lastly c) modem updates don't work because the device /dev/cdma_update doesn't exist, so the modem.bin firmware_update call fails !!!
In short, I had to fumble the OTA file apart and do the update manually in two runs:
First file, kick the checksum, hardware check and modem update out, then manually run the ZIP through CWM. The zip subsequently (LUCKILY) updated the stock recovery and overwrote CWM with a new fresh stock recovery.
Second file had everything kicked out BUT the modem udpate and LTE patch, so with the STOCK recovery this file ran through just fine, updated the modem and then applied the LTE delta patch.
Phew!!!
Of course I had to manually restore root after the update, had backed up with voodoo, auto restore failed, so terminal and hacking it was...
Now I have the tab running on clean stock FD01, baseband and LTE FD01, rooted and stock recovery.
No more CWM, no more "hacking" with the ROM until some dev finally releases a "correct" CWM and at least ANY factory ODIN image is available to bring the tab back to stock if needed!!!
Kinda sick of the non-support for this tab. So much going on for the Galaxy Note and pretty much every other device. I'm starting to regret having bought this "special" Verizon version
Awesome find and great to know for whenever ics does come out. Could you please post the recovery img you got?
Sent from my DROID BIONIC using Tapatalk 2
OK after getting so many responses I decided to just post everything here in hopes that it will help others, too:
All files are here:
http://www.mywo.org:88/XDA/sch-i815/index.php
Step by step procedure to update the Verizon Tab from ..FA02 to ..FD01 build IF YOU ARE stuck with CWM installed on your tab and the original OTA fails with errors:
Upload the SCH-I815_FA02c_To_FD01.1.zip to the INTERNAL(!) SD card. This is important because CWM contains a bug that will only allow you to install from ZIPs stored on the INTERNAL SD storage.
Upload the SCH-I815_FA02c_To_FD01.2.zip to the EXTERNAL(!) (micro SD) card. This is important, because after the factory recovery is restored, it will correctly (and only) look for ZIPs on the EXTERNAL card.
Best way just copy both files to both locations
Fire up CWM and do "install from ZIP" and select SCH-I815_FA02c_To_FD01.1.zip
It should run (takes a while) and eventually tell you all is done. BOOT the tab. It should boot fine but in system it will show the new Android build FD01 but the baseband (radio) will still be the "old" one.
Now press and hold power and vol up again until you see the default Samsung recovery menu. Choose install from ZIP and select SCH-I815_FA02c_To_FD01.2.zip. This will now upgrade the baseband only. When done, reboot and enjoy being back on the "factory upgrade path" with the tab.
I hope someone more savvy than me can "fix" CWM to work properly with VZW tabs (accept the checksum, not fail the check for "SCH-i815" and provide the correct /dev file links for radio upgrades). Until then, I recommend just leaving the tab as-is and not tinkering with the ROM. Not that there is any custom ROM available anyway :-(
I also pulled the NEW factory recovery image FD01_recovery.img with the following command:
dd if=/dev/block/mmcblk0p6 of=/sdcard/FD01_recovery.img bs=4096
So in case anyone with a botched recovery wants to restore factory (Samsung 3e) recovery. This was actually the reason I had to go through all this... There is NO factory recovery image ANYWHERE to be found. I can't believe that I should be the first one ever to post one?? Anyway, hope it will help
I'm still quite new here, so I do really appreciate every click on that "thanks" button
P.S. for tinkerers and devs I also uploaded the original, untouched OTA file (0559c0e4e08e.update_SCH-I815_FA02c_To_FD01.bin) as it came from Samsung or Verizon or whatever and ended up in the /cache partition.
THANK YOU!
Electron,
You sir, are a BOSS! Thank you so very much for doing the work, and sharing it. You just made things one hell of a lot easier on me, and anyone else that follows.
Regards,
-Rob
Also want to say thanks. You rock, dude. I wouldn't have known how to revert **** on my own.
Also, I feel like we need a sticky or something for sch-i815 owners to go to for device specific stuffs, especially since there is little knowledge/info out for this device.
Sent from my Galaxy Nexus using xda premium
hmm i only ever installed ROM manager ... but i did root it ... problem is ... now i don't have a CWM recovery to flash the file ... any ideas?
phigmeta said:
hmm i only ever installed ROM manager ... but i did root it ... problem is ... now i don't have a CWM recovery to flash the file ... any ideas?
Click to expand...
Click to collapse
You're in luck! You don't need to go through the whole ordeal because you do NOT have CWM! You can just update the regular intended way. Go into settings, about phone and then click check for system updates. If it presents you the OTA update, just do it the regular way.
My complicated "hack" is only necessary if you DO HAVE CWM installed.
Im sorry I did not explain well what my issue is.
I do not have CWM installed, however i did delete a few appilcations using titanium backup. This causes updates to not take. I would really like to just take it back to factory and start over (this time with less stupidity on my part)
I of course would assume that once its at factory i can then install updates again.
Right now when i try i get the "!" droid sign and a reboot
phigmeta said:
Im sorry I did not explain well what my issue is.
I do not have CWM installed, however i did delete a few appilcations using titanium backup. This causes updates to not take. I would really like to just take it back to factory and start over (this time with less stupidity on my part)
I of course would assume that once its at factory i can then install updates again.
Right now when i try i get the "!" droid sign and a reboot
Click to expand...
Click to collapse
Hey
OK unless someone can tell us how to "make" an ODIN flashable ROM for you, here is what I would do (and please don't get scared because it sounds a bit convoluted).
First, you need to be rooted. This is obviously the case.
IMPORTANT since you don't have CWM installed yet, SAVE your factory restore.img before proceeding, this saves you a lot of hassle later!
Open the android terminal, type su (accept the prompt) and then type (or copy/paste)
dd if=/dev/block/mmcblk0p6 of=/mnt/sdcard/factory_recovery.img bs=4096
Check that you have a "factory_recovery.img" file on your sd card now it should be about 8M big.
Now you're safe to install CWM from the forum, look for the other thread(s) where this is being discussed and follow the instructions for the P6800 "international" version with 3G. CWM Thread here:
http://forum.xda-developers.com/showthread.php?t=1613638&highlight=cwm&page=3
Then (thanks to nicduim!) there is a full factory (rooted) CWM image floating around on the forums here:
http://forum.xda-developers.com/showthread.php?t=1613638&page=6
Which I used to restore my tab to "almost factory" with the missing bloat apps back in place.
I have a copy on my server here: http://ww.mywo.org:88/XDA/sch-i815/ it's the "2012-05-06.22.48.58.ZIP"
unzip that and put the contents on your INTERNAL SD card in the folder clockwordmod. So on your internal SD you should have /clockworkmod/2012-05-06.22.48.58 and inside there the files boot.img, recovery.img etc.
Use CWM recovery to restore this backup. If you never used CWM before. Press power button and volume up and hold both until you see the menu screen with text. You can go up/down with the volume buttons (go slow, it's very laggy) and with the power button you "select" an option. Select the "restore from backup" option and point it to the only folder being offered, the 2012-05-06.22.48.58.
The restore takes a while, then reboot the tab. Now you're back to stock! Last thing you need to do is get rid of CWM again because in the end it's still a bit buggy and will prevent the OTA update from running properly.
Since you luckily have a backup of the factory recovery in form of that factory_recovery.img file, just install and open terminal again, type su and then type (or copy)
dd if=/mnt/sdcard/factory_recovery.img of=/dev/block/mmcblk0p6 bs=4096
This overwrites CWM with your original Samsung Android recovery.
Now you just reboot as usual, connect to the internet and wait until the popup message shows up that a system update is ready, accept it and enjoy
If you don't want to wait for the automatic OTA, you can also stop before killing CWM and use my convoluted 2-step manual update which will get you to the exact same condition as the official OTA.
Hope all this makes sense
I was already on stock FD01 when I tried installing CWM for the P6800 that's floating around here somewhere. Odin said it was a success, but it looks like it didn't take. I've done it a few times, but still ended up w/ the stock recovery. However, after reading through your thread, I do not see a /dev/cdma_update in my I815 either. Is it possible that my attempt to install CWM (although unsuccessful) wiped out this file, among others?
Right now, I'm still at stock FD01 (rooted) and everything seems to be working. When I tried doing an OTA update, it just tells me that I have the latest update and no newer update is available.
One other thing, if I have to, I only have the stock recovery right now since CWM didn't take, can I simply flash both zip's using the Samsung stock recovery to put everything back in stock?
SCH-I815_FA02c_To_FD01.1.zip
SCH-I815_FA02c_To_FD01.2.zip
AlpineMan said:
I was already on stock FD01 when I tried installing CWM for the P6800 that's floating around here somewhere. Odin said it was a success, but it looks like it didn't take. I've done it a few times, but still ended up w/ the stock recovery. However, after reading through your thread, I do not see a /dev/cdma_update in my I815 either. Is it possible that my attempt to install CWM (although unsuccessful) wiped out this file, among others?
Right now, I'm still at stock FD01 (rooted) and everything seems to be working. When I tried doing an OTA update, it just tells me that I have the latest update and no newer update is available.
One other thing, if I have to, I only have the stock recovery right now since CWM didn't take, can I simply flash both zip's using the Samsung stock recovery to put everything back in stock?
SCH-I815_FA02c_To_FD01.1.zip
SCH-I815_FA02c_To_FD01.2.zip
Click to expand...
Click to collapse
Oh wait, so you are saying that in "About device" your Android is 3.2
Baseband i815.04 V.FD01 I815FD01
and your Build number is already at HTJ85B.I815FD01.SCH-I815.I815FD01 ?
That would mean you are already updated. In this case, it should be pretty easy to fix your problem. Which apps did you delete with Titanium? I can back them up from my system and make them available for you. All you'd need to do is drop the backup files into your Titanium backups folder and then fire up titanium and restore them!
The /dev/cdma_update node is only required WITHIN CWM recovery, so that is nothing for you to worry about. The zip files above won't help you because they are incremental updates requiring your system to be at FA02, not FD01 !
Yes... I'm already in the latest update. I already backed up the bloatware using Titanium Backup before uninstalling. So I just need to restore them back in order to receive and apply OTA updates in the future?
Sent from my SPH-D710 using Xparent ICS Blue Tapatalk 2
Please Help
Hi. I'm rooted and removed all sorts of bloatware with Titanium. I did this a long time ago and did not back anything up because I'm used to running hardware with custom ROMs available, and not relying on OTA updates.
Since there aren't any custom ROMs for the i815, I'd like to get ready for the upcoming ICS update. To do so, I want to get FD01 loaded onto my device, but I can't update because I've apparently removed too much of the required bloatware.
Does anyone know WHAT pieces of bloatware I'd need to reinstall in order for the OTA update to apply? I'd assume I can restore them and then apply the update and re-root.
If anyone can help pinpoint what missing APKs might help, I'll give them a shot. And, to the extent I figure anything out, I'll repost here in the hopes that it helps someone else.
electron,
Your instructions worked ... thank you so much
@jkrell... the failed attempt at installing the update should return an error message(s). You just have to read through them until you find the culprit(s). Apparently I uninstalled a few odexed files that were needed. I couldn't update until i hunted them down and restored them.
I guess we all jumped at the opportunity to install the cwm recovery image, that we didn't even think about cmda updates....ooops. So far i had to do a complete factory restore after the update. I was getting soft bricked to the point where I had no choice. Good thing I sent all titanium backups to actual sd card, i was able to salvage 97% f my data..... with the exception of a few downloads i forgot to move.
Gamecih doesn't work anymore (either version). No more automative data hacks I'm not sure what's going on. I uninstalled adfree..used titanium backup to uninstall both versions and reinstalled both several times. Oh well.
It really sucks not having nandroid backups but it's not worth the trouble of having to do this everytime an OTA modem update gets pushed to my tab. Needless to say, I won't be odining the cwm based recovery image again.
I'm with the O.P. I wish i hadn't wasted my money on this tab. No true cwm for this tab, so no dev will ever waste thier time with this tab. The sch i815 will soon be forgotten about and some other tablet will be all the hype before summer ends....that's just how it is. 21 months left on my contract.... [email protected]#k my life. Lol
Thanks Smitty.
When I try to update, I just see the "!" logo and then the device reboots. Is there a log file somewhere I can look at to see what the errors are?
I hear ya on the gloom and doom, but this device has only been out for just over 3 months now. I'd expect a recovery and some custom ROMs to come eventually. I doubt I'll go the custom ROM route unless CyanogenMod is supported, because I have no complaints about the tablet's performance thus far. It's speedy, smooth and the battery lasts forever.
In my book, this is a great tablet and I'm satisfied with the purchase.