Database Users

[Q] cannot reach magldr menu

Hello!
I'm having a problem during the installation of the clockwork recovery, tbh its one of the first steps but here we go
atm Im using MDJ's CyanogenMod 7 v. 2.6 and I would like to install the recovery but to do this I need to reach magldr which is not accessible due to the fact that I can't do anything except looking how my android autoboots ;/
every time I turn off the phone and hold the power button, it just boots to my android. I see magldr starting and booting my system, counting 123456, then gogogo but I cant do anything
help me

You need to keep that button pressed until you're really in the menu, you're probably releasing it too soon?

Are you keeping the power button down all the way thru the boot process, if you're not, keep holding it from power down til it reboots and keep holding it until it should switch to the mgldr options menu.
Sent from my HTC HD2 using XDA App

StephanV said:
You need to keep that button pressed until you're really in the menu, you're probably releasing it too soon?
Click to expand...
Click to collapse
oh my god, that was so easy
works
thank you very much!

once you get used to it, you'll find you only need to hold power from just at the end of the first bootscreen until the menu appears, about 4/5 seconds. Not all the way from power on, about 15 seconds.

[Q] flashing hd2 with win 7

Hey guys,
So I've decided to flash my mates hd 2 with win 7.
i downloaded the rom from the forum which has the loader (i think).
i watched the video demo on youtube and followed the instructions there.
when I boot up the phone after rom updater, I can't get into the bootloader! all I can see is htc logo and nothing happens.
What do i do? Have I bricked the phone?
Please help!

emclondon said:
Hey guys,
So I've decided to flash my mates hd 2 with win 7.
i downloaded the rom from the forum which has the loader (i think).
i watched the video demo on youtube and followed the instructions there.
when I boot up the phone after rom updater, I can't get into the bootloader! all I can see is htc logo and nothing happens.
What do i do? Have I bricked the phone?
Please help!
Click to expand...
Click to collapse
With the phone turned off, hold the volume down button on the side of the phone and press the power button. Keep holding the volume down button until you see the tri-colored screen (this is bootloader).
at this point i would suggest you flash task29, enter tri-colored screen again (bootloader), then flash magldr v.1.12, then let the phone boot into magldr, choose option 5 and flash wp7.

Hi,
I cannot get into the tri-colored screen now! thats my problem. I updated HSPL to *.HSPL, and tried updating the rom and this happens!
I have tried the reset method by holding Vol + and - keys with Power button, but that doent help too
how do i used task29 when i cant get past the HTC logo on the phone?

emclondon said:
Hi,
I cannot get into the tri-colored screen now! thats my problem. I updated HSPL to *.HSPL, and tried updating the rom and this happens!
I have tried the reset method by holding Vol + and - keys with Power button, but that doent help too
how do i used task29 when i cant get past the HTC logo on the phone?
Click to expand...
Click to collapse
try soft reset. remove the back cover then press a blunt pointed object such as a pen or stylus into the reset button to the bottom left of the SIM, near sd slot, and release. The phone will then reboot. try to get into bootloader as soon as it restarts

hi, i tried installing the rom again, and i get some cpp error?
dont know why.
i tried reverting back to stock rom, installed it successfully, and now when I unplugged the mobile, it turns off. when i plug it in it turns back on and it loops at HTC logo i mean, I turns itself off and turns itself on.
why do you think this happens?

Hi,
The problem is When I plug in my phone to USB, it boots up shows a HTC logo, with
R 2.06.51.07
G 15.30.50.07 U
D 1.66.76641
written in red on left corner and holds on for a few seconds and turns off, and turns on itself.
end note: the phone only starts when I plug it to USB, else its a brick

[Q] Solved, please close thread.

Hi guys, I have searched and searched and searched but cannot get anything I've tried...
Essentially, I got an HD2 today, flashed HyperDroid and all was good, until I wanted to access CWM via the mgldr menu, I tried to access it but it just would not work. Holding the power button would just boot the phone, it displays some text that I cannot remember then '1234 GO GO GO!'
So instead I tried to boot into CWM from ROM Manager, but that didn't work either, it just booted the phone as usual.
So I did a task29, started all over again, flashed a different ROM and the same thing..
I really am lost, any help would be much appreciated.

no offence intended here
Task 29 wipes the phone,
put phone in bootloader, turn on holding volume down,
install magdlr, then the phone will only boot to magdlr, make sure you have appropriate radio to boot.
you should now only have Magdlr on the phone and nothing will boot and you can go through the process of installing cwm to get a android build up and running.
to access magdlr when you have a build be it android or wp7, turn the phone on when it vibrates press the power button and keep holding it down until the magdlr screen appears

Demon_man said:
to access magdlr when you have a build be it android or wp7, turn the phone on when it vibrates press the power button and keep holding it down until the magdlr screen appears
Click to expand...
Click to collapse
None taken, I guess I misread the instructions on all the other threads, I thought you just had to hold power until it booted into mgldr, not press it, release, then press again. Thanks mate!

Jake254 said:
None taken, I guess I misread the instructions on all the other threads, I thought you just had to hold power until it booted into mgldr, not press it, release, then press again. Thanks mate!
Click to expand...
Click to collapse
its just the way ive always got into magdlr but np hopefully u get sorted.

[Q] multicolor bootloaderscreen problem

I have been trying to nand install android on my HD2 but everything i do failed.
Before i continue i would like to set the HD2 back to factory default (wm6.5) but no i can not get in the multicolored bootloader screen. aMagldr V1.13 is installed and when i start the phone holding down the power button it starts aMagldr and not the original bootloader screen so i can;t install wm6.5. The only OS i can install is Windows Phone 7 but i do not want to use that system.
Ihope someone can help me with my problem, i have been surfing this forum for the last 5 days but can not find what i am doing wrong. I hope i have given enough information.
hb75

hb75 said:
when i start the phone holding down the power button it starts aMagldr
Click to expand...
Click to collapse
yes, because thats how you start magldr, , , with power held.
Bootloader however you hold VOLDOWN, not power.

sorry, i meant to write volume button.

so just to be certain ... you are HOLDING volume down AND power/endcall TOGETHER for at least 8 seconds?

I have tried it about a thousand times in a lot of different ways.

comes up a fair bit this one, , cannot access bootloader, , , the only actual time ive seen it fixed, and i think ive seen it fixed on two separate occasions, , was dismantling it and disconnecting the bottom hard keys., , not that i'm recommending you do that, of course.

[Q] How can the cLK menu be accessed on boot?

I have a KitKat ROM installed that stopped booting (I'm stuck on the HTC screen) and I'd like to see if upping the partitions a bit fixes it, but I can't figure out how to access the cLK menu (not the CWM menu). Thanks.

sultan_of_slackware said:
I have a KitKat ROM installed that stopped booting (I'm stuck on the HTC screen) and I'd like to see if upping the partitions a bit fixes it, but I can't figure out how to access the cLK menu (not the CWM menu). Thanks.
Click to expand...
Click to collapse
First turn the handset off, then turn back on, as soon as you feel the vibration at start ( or as soon as the screen lights up ) hold the back button until you get the cLK menu

ph0n3n3rd said:
First turn the handset off, then turn back on, as soon as you feel the vibration at start ( or as soon as the screen lights up ) hold the back button until you get the cLK menu
Click to expand...
Click to collapse
thanks. will have a try.