[Q] How do you connect to splashtop from the internet? - Eee Pad Transformer General

The IP number the streamer shows is just the local IP, meaning I can only connect from the local network???

If you want to access the streamer from outside your network and the streamer is on a local-only IP address then you'll need to set up a port forwarding rule (and possibly a corresponding firewall rule) on whatever device does the routing on your network (usually the ADSL Modem or Cable Router on a home network).

If you have a static IP for your ISP you can create a port forwarding rule in your router so that say the port that splashtop is running on is 6783, then you will forward all TCP/UDP traffic from port 6783 to the internal IP that is displayed in splashtop. Then in the splashtop app you set it up so that it connects to your home's ip address (you can find this by going to whatismyip) and port 6783.
So for example: the ip address for my home (from whatismyip) is 01.230.29.29, and splashtop is showing me 192.168.0.199, as well as port 6783 (you can see this under network in the desktop app), i will go in to my router, port forwarding, and then create a rule where any traffic to and from local/remote port 6783 will go to the computer at 192.168.0.199.
This is really easy and permanent if your router supports mac address reservation so that your computer will always have the same internal network IP. It is also easier if you have a static IP, however if you don't have a static IP you can use something like DynDNS's dynamic IP service to have an ip that will always connect to your home regardless of what the ip changes to.

Great video here, got it running the 1st try following this video.
http://www.youtube.com/watch?v=IMSVTRqkBU8&feature=player_embedded

Off Topic
Hey anyone using the latest verison of splashtop 1.4.5.3 on their pc? For some reason now, everytime my pc start up the splashtop desktop client does not start up even tho the setting for it is enable. I always have to use logmein to log into my pc and start the app. Anyone else? I never had this issue before updating to 1.4.5.3.

Thanks guys.

If you go to portforward.com it will go step by step with all your settings.

dazz87 said:
Hey anyone using the latest verison of splashtop 1.4.5.3 on their pc? For some reason now, everytime my pc start up the splashtop desktop client does not start up even tho the setting for it is enable. I always have to use logmein to log into my pc and start the app. Anyone else? I never had this issue before updating to 1.4.5.3.
Click to expand...
Click to collapse
its the same for me. I havent found a way to fix it.
Sent from my awesome Asus Transformer using XDA's premium app.

Related

Remote connection to home PC or work

How can i connect my home pc or work pc through my Pocket PC through GPRS.Is it possible by any software.
Yes, this is assuming you have set your home PC to accept incoming Remote connection, and selected which users has the permission.
From your Pocket PC, you can use Terminal Service Client:
- First of all, you must know your home PC's IP Address.
- Launch Terminal Service Client, key in your home PC's IP Address, click connect.
- Once connected, you'll be prompted username and password to log in.
- Always use a different username than the one already logged on, as this will log the current desktop session off.
Well, since most of us use Dynamic IP DSL connection, the IP address changes everytime the PC reconnects. Therefore I have made a small Windows program to be run in the home PC to constantly update its current IP address to a website. So, from anywhere you can log on to this site (just bookmark the site) and check your home PC's current IP address. If you're interested, you can try my program, it's free.
http://www14.brinkster.com/MyLastIP
It's designed to fit a PPC browser.
Iam using XP prof.Where is Terminal service there,can u loacte.I want to test first with ActiveSync to connect my PC from Pocket PC.I have launched Terminal service in Pocket PC.It asks for Server.Its my Home pC IP address?
Please help again iam new to this!!
mushtash said:
Iam using XP prof.Where is Terminal service there,can u loacte.I want to test first with ActiveSync to connect my PC from Pocket PC.I have launched Terminal service in Pocket PC.It asks for Server.Its my Home pC IP address?
Please help again iam new to this!!
Click to expand...
Click to collapse
Make sure, your XP Pro is set to accept Remote connection, from your XP Pro PC:
- Start > Control Panels > System > Remote > Remote Desktop
1) Check "Allow users to connect to my computer"
2) Click "Select Users" to add users which you allow for Remote Connection. * Strongly advise you to set password for each username
Once this is done. You can check your PC's IP address:
- Start > All Programs > Accessories > Command Prompt
1) Type in ipconfig
2) You will the various IPs for your PC.
If you want to test using your Pocket PC, use your PC's LAN IP. (Ethernet adapter Local Area Connection).
However when your on WiFi or GPRS, you'll have to use your PC's WLAN IP, which you can obtain by using my program I mentioned earlier.
Thank you so much.But can itry to browse my PC dekstop while i have connected to Intenet and using Active Syn while i have docked my Pocket PC in the cradle.
mushtash said:
Thank you so much.But can itry to browse my PC dekstop while i have connected to Intenet and using Active Syn while i have docked my Pocket PC in the cradle.
Click to expand...
Click to collapse
Yes, you can. However, you'll still use your home PC's LAN IP when the PocketPC is docked in the cradle.
I have come out with the guide on how to use MyLastIP client and thet website:
http://www14.brinkster.com/MyLastIP/guide/guide.asp
Its realy nice job!!As you said to use Home PC Lan IP.I dont have netowrk on Ethernet card no cable pluged in.So i cant see Lan IP address.When I tried POcket PC Terminal its not connecting to Server,i was trying by USB Docked PPC.What to do
I gather your not connected to a LAN nor having an Ethernet card installed.
If you want to try out Terminal Services Client from your PocketPC, you may want to download this program called vxUtil from http://www.cam.com/vxutil_pers.html
Once u get this program, you can view your Pocket PC's current IP addresses. If you want to use TSC via USB cradle, take a look under "Serial on USB", the IP address for its Default Gateway should be your PC's IP address.
VPN?
Great thread for me guys. Really helped a lot. Now I can use Terminal Services to remote control my VPN Server which has the public internet IP address.
Next, however, I need to remote operate one of the workstations on my VPN. I tried logging onto the VPN through GPRS that worked. I can TS remote the server, but cannot connect to the workstation. After connecting to the VPN I tried TS with the workstation ip (local network ip of 168.192.xx.xx All I got was a could not connect server timed out message. Any ideas?
Thanks
BTW the LAst IP Address web site is a great idea for us that travel constantly. Thankfully my cable modem keeps my IP address fairly static for long periods at a time. But this will make a great backup for those Murphy Law times when I gotta get on and the modem rebooted! Thanks for a great service.
Steve
Did anybody tried J-Desktop to access via Pocket PC?
Re: VPN?
watchdogsdg said:
I can TS remote the server, but cannot connect to the workstation. After connecting to the VPN I tried TS with the workstation ip (local network ip of 168.192.xx.xx All I got was a could not connect server timed out message. Any ideas?
Click to expand...
Click to collapse
Could it be a built-in or personal firewall installed on the workstation? or maybe the workstation's port for Remote Desktop is not opened?
VPN
No, no firewall and remote is open. In deed, I have VNC running on the workstation and after logging on to the vpn i can remote the workstation using vnc viewer. but i hate the interface compared to TS and don't really want to run another server if not necessary. btw i can run the workstation from my xp laptop using remoe desktop connection after logging ono the vpn
thanks for any tips.
steve.

need a bit of help, how to connect to my pc using athena??

Ok i know i already saw the answer of this somewhere but i already looked for it and i just cant find it.
I have a athena and i would like to remotely connect to my pc that is on my office and use it remotely, i know there are programs to do this i just cant get the right words to find them.
can anyone help me out on this?
thankx
** make sure that you have windows xp pro**
1. download this file onto your pda and run it.
2. make sure that if you are using a router the you open up port 3389... it has to be this port and no other
3. on your desktop goto start/settings/control panel/system/remote and click the box that says "allow users to connect remotely to this computer", that is it you don't need to click anything else
4. open up the program and type in your ip address without the port number then username and password - which must match your windows login and password.
done
irus said:
** make sure that you have windows xp pro**
1. download this file onto your pda and run it.
2. make sure that if you are using a router the you open up port 3389... it has to be this port and no other
3. on your desktop goto start/settings/control panel/system/remote and click the box that says "allow users to connect remotely to this computer", that is it you don't need to click anything else
4. open up the program and type in your ip address without the port number then username and password - which must match your windows login and password.
done
Click to expand...
Click to collapse
All good advice but this may not work if your office PC is behind a firewall / your office network uses Network Address Translation or you need a VPN to access the network. Give it a go and see what happens but if the IP address of your office PC starts 10.0.0 or 192.168 or similar, it is unlikely to work. You will then have to use a remote access service.
apd said:
All good advice but this may not work if your office PC is behind a firewall / your office network uses Network Address Translation or you need a VPN to access the network. Give it a go and see what happens but if the IP address of your office PC starts 10.0.0 or 192.168 or similar, it is unlikely to work. You will then have to use a remote access service.
Click to expand...
Click to collapse
Also if your IP's range anywhere within 172.16.0.0 – 172.31.255.255, the you're behind a firewall.
ltxda said:
Also if your IP's range anywhere within 172.16.0.0 – 172.31.255.255, the you're behind a firewall.
Click to expand...
Click to collapse
If you're just using 3G/HSDPA you shouldn't have any problems connecting.
If you've got a DSL connection with a dynamic IP address (like mine with Virgin Media) Just register and download the NO-IP software (www.no-ip.com - it's free) then instead of typing in your Ip address on RD you'll put "....no-ip.biz" - or whatever they assign you.
As already stated you HAVE to open up port 3389 on your router and assign it to the relevant pc. This number you will find by entering "ipconfig" in the cmd window. Be aware that if your router gets turned off you could find that the IP address of your computer changes, so you'll have to go back into your router settings and change it to the new ip address for that pc.
I've tested RDP on XP Pro, Media Center 2005 and Vista. I found it to be a little better when the host was a Vista pc - whether this is my imagination or because it is designed with Vista in mind I don't know.
leoni1980 said:
If you're just using 3G/HSDPA you shouldn't have any problems connecting.
If you've got a DSL connection with a dynamic IP address (like mine with Virgin Media) Just register and download the NO-IP software (www.no-ip.com - it's free) then instead of typing in your Ip address on RD you'll put "....no-ip.biz" - or whatever they assign you.
As already stated you HAVE to open up port 3389 on your router and assign it to the relevant pc. This number you will find by entering "ipconfig" in the cmd window. Be aware that if your router gets turned off you could find that the IP address of your computer changes, so you'll have to go back into your router settings and change it to the new ip address for that pc.
I've tested RDP on XP Pro, Media Center 2005 and Vista. I found it to be a little better when the host was a Vista pc - whether this is my imagination or because it is designed with Vista in mind I don't know.
Click to expand...
Click to collapse
Of course, this only applies if you are not behind a corporate firewall using NAT or other dynamic IP behind the firewall. Also, if it is a corporate network, opening port 3389 may be (a) very difficult to convince your IT dept to do and (b) not very secure!
If one iof the dynamic dns systems works for you, you might try dyndns.org

help needed to set up Remote Desktop

can anybody tell me how to setup remote desktop from HTC to my PC (I am using Windows 7)
Step by step please guys
http://www.youtube.com/watch?v=iCs4GQma7IQ
With that guide I made it work, good luck.
I did exactly everything in this guide and even set a corresponding exception in the Windows firewall (also tried with Windows firewall off) - but the mobile remote desktop program always tells me there was an internal error... But what the heck could that be?
Dont bother the remote dt program is ****e, im currently using vnc which is a bit better, but rather lacking also.
Is it me or did that video not mention setting up your windows machine to allow connections.
Make sure remote desktop is enabled on your PC and make sure it is allowing connections from computers running any version of Remote desktop(2nd option) third option works between windows 7 machines but wouldn't allow my phone to connect.
Your error sounds like it is being caused by something on the phone end though so i dont know if that will help.
Those with remote desktop working can you get it to go landscape? Mine works fine except i can't get landscape mode. Also anyone know of a app that can send wake up requests to a machine? I have this on my laptop so i can wake my pc over the internet and then log in. Anything similar out there for win mobile?
allowing a connection through windows firewall alone is not helping, if you have other system securtiy programs that also has a firewall. or maybe your router has a firewall too. you should try and forward the right port (3389) in the software of your router.
I opened port 3389 on the router, I activated the correct remote desktop option on the PC (Vista), the IP is right (wrong IP adress throws a different error, so the program gets that far)...
I guess you have Windows 7 Home version
Have you tried using 16 bit high colour option? Mine said it couldn't connect when i turned it down to 256 colours.
Edit: Windows 7 x64 btw
OK on my windows7 x64 ive turned on remote desktop and set it to allow connections (2nd option) and i still cant connect, what do i type in user/pass on the hd2
-ive setup the portforwarding on my bethere box
-tryed both color modes on hd2
does it have to be over wifi or can it be over 3g?
Your user name and password for windows.
You MUST have a password set up on your windows account to be able to use remote desktop. If you don't have a password set up remote desktop and other network related access will not work. I.e using the phone to access shared windows folders.
bzdemes said:
Your user name and password for windows.
You MUST have a password set up on your windows account to be able to use remote desktop. If you don't have a password set up remote desktop and other network related access will not work. I.e using the phone to access shared windows folders.
Click to expand...
Click to collapse
ok ive added a password to my pc but still wont work, i think i tmay be something todo with this steps
2. Open a web browser, and type 192.168.1.1 to access your router. If you don't know the default username and password (usually admin/password), Google for it.
3. Enter port forwarding. Add a new entry using your local IP address, and the start/end port of 3389.
Click to expand...
Click to collapse
my router is a THOMSON TG585v7 and to log into it i need to type http://192.168.1.254 so i did and the only thing like port forwarding i can find is the Toolbox\Game & Application Sharing menu and in their i can type the ports but cant type the local IP address as their no where to add it, ive added a pic that might help you help me
If you are accessing the machine via your wifi(i.e your own network) you should be able to do it without any port forwarding.
So punch in your machines local IP and your username and password. That should work(make sure it is using your WiFi and not still connecting via 3G). If you wanted to be able to do it via 3G/wifi(external network) then you will need to get port forwarding working.
Edit: Port forwarding guide for you. I think this is roughly the same version of router you have just different branding.
http://www.portforward.com/english/...mson-Alcatel/SpeedTouch585/Remote_Desktop.htm
bzdemes said:
If you are accessing the machine via your wifi(i.e your own network) you should be able to do it without any port forwarding.
So punch in your machines local IP and your username and password. That should work(make sure it is using your WiFi and not still connecting via 3G). If you wanted to be able to do it via 3G/wifi(external network) then you will need to get port forwarding working.
Edit: Port forwarding guide for you. I think this is roughly the same version of router you have just different branding.
http://www.portforward.com/english/...mson-Alcatel/SpeedTouch585/Remote_Desktop.htm
Click to expand...
Click to collapse
so in the last part of the setup i need to manually define it as the local ip, still not working if that's what i should do
The last step is applying the forwarding to your PC. So you should be able to pick your PCs name in the drop down box.
Have you tried just doing it over your local wireless network(forget about port forwarding for a minute.) Enter the local IP(could also just try entering the name of the PC though im not sure if that works) of your PC as the computer then your user name and password.

[Q] Splashtop remote desktop outside of home network?

I set up remote desktop with mycloud/splashtop on my tf101. I can locally remote access my computer on the home network.
But I want to be able to access my computer from any network. Would the fact that when I was asked for permissions on my pc for either private networks or public networks, I checked private be the reason why i can't connect when using a network outside of my home network? If so, how do i change this permission.
Right now, when i try to connect to my computer using an outside network like my mobile data connection tethered from my phone, it says cannot reach.
You will need to do a port forwarding rule on your router. There r threads about this just do a search.
dazz87 said:
You will need to do a port forwarding rule on your router. There r threads about this just do a search.
Click to expand...
Click to collapse
Is that the only thing I'd have to do? I wouldn't have to add it as a new device connection on my transformer would I?
i forwarded the 3 ports from this link http://support-remote.splashtop.com...nect-to-my-home-computer-from-outside-of-home
and still it says cannot reach.
Also, I enabled discover over internet with my google account on my computer.
under the status tab on the splashtop application on my pc, it says the streamer is online with the following ip addresses, and only my local area connection is listed.
xdmds said:
i forwarded the 3 ports from this link http://support-remote.splashtop.com...nect-to-my-home-computer-from-outside-of-home
and still it says cannot reach.
Also, I enabled discover over internet with my google account on my computer.
under the status tab on the splashtop application on my pc, it says the streamer is online with the following ip addresses, and only my local area connection is listed.
Click to expand...
Click to collapse
You need to set the connection with your WAN IP not your local IP. On your PC go to whatsmyip.org or similar to find out what your current WAN IP address is.
If you don't have a static IP address your WAN IP will likely change at some point. You can get a free account at dyndns.com and set it up in your router (Google it). You can then connect to your PC using YOURUSERNAME.dyndns.org or whatever you setup in DynDNS.
The alternative is to use TeamViewer or LogMeIn or similar which will automatically keep track of your PC whenever it connects to the internet.
Remote access can be real pain in the butt when you are accessing over the WAN.
As mentioned in posts above you need to set up port forwarding on your router, ensure there are relevant firewall exceptions and use your external facing IP address and set up a dynamic DNS account if you don't have a static IP - some routers have built in support for dynamic DNS.
Log me in is a good free service for this but the android app is pricey (and not very good IMO) - while the interface is not ideal it does take away all of the annoying hassles.
If you do go down the dynamic DNS, port forwarding route you might find that remote desktop via 2X RDP or similar is better than splash top anyway - although you can't do remote desktop on windows vista/7 home editions.
good video here, got it working very first try following stepby step
http://www.youtube.com/watch?v=IMSVTRqkBU8&feature=youtube_gdata_player
Sent from my Transformer TF101 using Tapatalk
nvm turns out i only forwarded the ports on my router firewall. after also forwarding the ports in my modem i can now access from an outside network
xdmds said:
Also, I enabled discover over internet with my google account on my computer.
Click to expand...
Click to collapse
Just an FYI, but auto discovery doesn't work on the Android client yet, though it is coming (it is experimental in iOS).
Wyse PocketCloud does have this facility, though it doesn't stream video/games like Splashtop.
Regards,
Dave
I would try TeamViewer. On your PC you can install the host version. That way you can access your PC before login. TeamViewer works without making changes in your router/firewall.
The Android TeamViewer client is free.
Sent from my Transformer TF101 using Tapatalk
I finally fixed my issue with doing this last night. I was forwarding all 3 ports but I was doing TCP and UDP (which I must say I've done many times before and never had an issue) but I removed the forwarding from UDP field in my router and just left the 3 ports forwarded in TCP field. Today I can now connect and perfectly use my PC from work using Splashtop w00t!

A Remote RDP Tutorial?

I honestly don't know what I'm doing. All I know is that all the things I've tried so far didnt work.
Can someone guide me on how to set this up on my NookColor?
My PC and NookColor share the same wifi connection via an Airport Exteme router. I know that there are two IP Address: one form y router, which I can see on www.whatismyip.com and the other is my computer's which I can see via cmd > ipconfig. So, my question is-- how do I set this thing up? Any step by step procedure?
What have you already tried? Also what version of OS are you using, some versions of windows have RDP kneecapped. Also, where are you trying to view it from?
If you already have RDP going, you can use Wyse PocketCloud to manage the connections through your google account, it's pretty straight-forward.
Personally, I use TightVNC as the desktop client and AndroidVNC Viewer and ConnectBot on the nook. I only use my home computer when at home, so the setup is fairly simple, have AndroidVNC talk to myipaddress using port 5900. Be sure to use the connecting password when you set up TightVNC - also check the character count as you enter it, sometimes it doesn't take all the characters, ie; the password "bob-ismyuncle" is stored as "bob-ismy".
For connections remotely (not on the same network) I first SSH into the machine with ConnectBot, then set up a port forward to localhost:5901 which AndroidVNC then connects to.
Also, has anyone tried NX?
I'll assume you're a windows user?
Make sure RDP is enabled on your PC (google it, really easy to enable)
If BOTH machines are connected to your network... get the PC's IP address (via cmd ipconfig) and connect to it using the RDP port (3128 on Windows)... ex: "192.168.100.199:3128"
If you want to use RDP away from home, you need to configure your router to forward any external connections on the RDP port directly to your PC. Then you'll want to connect using your external (router's) IP address. Ex: 111.222.333.444:3128 => 192.168.100.199:3128 .... then connect to "111.222.333.444:3128"
I like LogMeIn free and logMeIn Ignition great little app. also teamviewer has a free version and free app for android

Categories

Resources