How can i connect my home pc or work pc through my Pocket PC through GPRS.Is it possible by any software.
Yes, this is assuming you have set your home PC to accept incoming Remote connection, and selected which users has the permission.
From your Pocket PC, you can use Terminal Service Client:
- First of all, you must know your home PC's IP Address.
- Launch Terminal Service Client, key in your home PC's IP Address, click connect.
- Once connected, you'll be prompted username and password to log in.
- Always use a different username than the one already logged on, as this will log the current desktop session off.
Well, since most of us use Dynamic IP DSL connection, the IP address changes everytime the PC reconnects. Therefore I have made a small Windows program to be run in the home PC to constantly update its current IP address to a website. So, from anywhere you can log on to this site (just bookmark the site) and check your home PC's current IP address. If you're interested, you can try my program, it's free.
http://www14.brinkster.com/MyLastIP
It's designed to fit a PPC browser.
Iam using XP prof.Where is Terminal service there,can u loacte.I want to test first with ActiveSync to connect my PC from Pocket PC.I have launched Terminal service in Pocket PC.It asks for Server.Its my Home pC IP address?
Please help again iam new to this!!
mushtash said:
Iam using XP prof.Where is Terminal service there,can u loacte.I want to test first with ActiveSync to connect my PC from Pocket PC.I have launched Terminal service in Pocket PC.It asks for Server.Its my Home pC IP address?
Please help again iam new to this!!
Click to expand...
Click to collapse
Make sure, your XP Pro is set to accept Remote connection, from your XP Pro PC:
- Start > Control Panels > System > Remote > Remote Desktop
1) Check "Allow users to connect to my computer"
2) Click "Select Users" to add users which you allow for Remote Connection. * Strongly advise you to set password for each username
Once this is done. You can check your PC's IP address:
- Start > All Programs > Accessories > Command Prompt
1) Type in ipconfig
2) You will the various IPs for your PC.
If you want to test using your Pocket PC, use your PC's LAN IP. (Ethernet adapter Local Area Connection).
However when your on WiFi or GPRS, you'll have to use your PC's WLAN IP, which you can obtain by using my program I mentioned earlier.
Thank you so much.But can itry to browse my PC dekstop while i have connected to Intenet and using Active Syn while i have docked my Pocket PC in the cradle.
mushtash said:
Thank you so much.But can itry to browse my PC dekstop while i have connected to Intenet and using Active Syn while i have docked my Pocket PC in the cradle.
Click to expand...
Click to collapse
Yes, you can. However, you'll still use your home PC's LAN IP when the PocketPC is docked in the cradle.
I have come out with the guide on how to use MyLastIP client and thet website:
http://www14.brinkster.com/MyLastIP/guide/guide.asp
Its realy nice job!!As you said to use Home PC Lan IP.I dont have netowrk on Ethernet card no cable pluged in.So i cant see Lan IP address.When I tried POcket PC Terminal its not connecting to Server,i was trying by USB Docked PPC.What to do
I gather your not connected to a LAN nor having an Ethernet card installed.
If you want to try out Terminal Services Client from your PocketPC, you may want to download this program called vxUtil from http://www.cam.com/vxutil_pers.html
Once u get this program, you can view your Pocket PC's current IP addresses. If you want to use TSC via USB cradle, take a look under "Serial on USB", the IP address for its Default Gateway should be your PC's IP address.
VPN?
Great thread for me guys. Really helped a lot. Now I can use Terminal Services to remote control my VPN Server which has the public internet IP address.
Next, however, I need to remote operate one of the workstations on my VPN. I tried logging onto the VPN through GPRS that worked. I can TS remote the server, but cannot connect to the workstation. After connecting to the VPN I tried TS with the workstation ip (local network ip of 168.192.xx.xx All I got was a could not connect server timed out message. Any ideas?
Thanks
BTW the LAst IP Address web site is a great idea for us that travel constantly. Thankfully my cable modem keeps my IP address fairly static for long periods at a time. But this will make a great backup for those Murphy Law times when I gotta get on and the modem rebooted! Thanks for a great service.
Steve
Did anybody tried J-Desktop to access via Pocket PC?
Re: VPN?
watchdogsdg said:
I can TS remote the server, but cannot connect to the workstation. After connecting to the VPN I tried TS with the workstation ip (local network ip of 168.192.xx.xx All I got was a could not connect server timed out message. Any ideas?
Click to expand...
Click to collapse
Could it be a built-in or personal firewall installed on the workstation? or maybe the workstation's port for Remote Desktop is not opened?
VPN
No, no firewall and remote is open. In deed, I have VNC running on the workstation and after logging on to the vpn i can remote the workstation using vnc viewer. but i hate the interface compared to TS and don't really want to run another server if not necessary. btw i can run the workstation from my xp laptop using remoe desktop connection after logging ono the vpn
thanks for any tips.
steve.
Related
remote control ma ppc with ma pc via gprs??? how??!??
is there no way to control my pc from my ppc!??!!?
something like remote desktop(windows have..) ??
Most remote control software works using a regular network connection through active sync.
This should thus be possible with pretty much any nework connection, including gprs. Basically just dial gprs, get your phone's ip address, and use that for remote control. I think. In theory. But not fast.
V
Hang on. what are you asking? control you PPC from your PC or vice versa.
Either way, look into VNC.
V
no, i just want to control my pc From my ppc. can terminal services in programs do something for that??
another program?
JuNiOr_Gr said:
no, i just want to control my pc From my ppc. can terminal services in programs do something for that??
Click to expand...
Click to collapse
I would have thought so.
You'll need XP pro for the remote desktop server to be built in though. XP home does not have it.
Failing that, VNC, look here: http://www.cs.utah.edu/~midgley/wince/vnc.html
You can do this easily via GPRS. Simply connect to the internet via GPRS, and then start up Terminal Services Client on the ppc, insert the ip address of your pc, and step through the authentication dialogue. Of course you will have to make sure that your pc (running WinXP) has World Wide Web Services installed, so as to enable Remote Desktop via the internet.
Hope this helps.
i tried via terminal services , add my ip(of the pc) open the port from router, from my coputer click the allow other people to connect to this pc(also there i added ppc's ip) but could connect. i got an error from ppc.
i am using win xp pro .
i there another application like terminal services ??
VNC?
V
vijay555 said:
VNC?
V
Click to expand...
Click to collapse
couldnt download it
can u tell me which file? that one which sais PocketPC win2003?
i download that and a error came out
Did you enter your PCs IP address as seen on the PC, or did you enter the external internet IP? They are 2 different numbers, and regardless of whether you have ports open or not you wont be able to connect directly to the PCs network IP address.
If you're using an ADSL router then go to the configuration or settings page and find out what your internet IP is.
Re VNC
I've used this one quite well:
http://www.parystec.demon.co.uk/pt_vnc2.htm
But there are other free versions I imagine.
V
@JuNiOr_Gr
Which Port did you open for Terminal Services?
Did you then connect to you Internet IP from your PPC or to your local IP?
If you use VNC you have to open the VNC Port (default 5900).
Ist there a software firewall (e.g. XP Firewall) installed on your PC?
For terminal services to work you must have a password set on your XP account. Otherwise it should work with port 3389 forwarded. I use it fine from my Magician over GPRS.
Only thing is that it's a shame you don't seem to be able to turn off desktop background, themes etc that you can from the Desktop version of Terminal Services Client as this would improve speed.
I would like to use the built-in terminal services client to connect to one of our servers using the GPRS/VPN connection I am able to establish.
The problem is as follows:
I can establish the GPRS/EDGE connection to the internet. I then connect to the VPN and it shows that both connections are connected and data is running over the connection. I can ping the servers IP address, but as soon as I try to connect through the TS Client, it disconnects the VPN.
Has anyone been able to get this to work?
Be sure that your terminal server name does not has dots in the name. WM5 thinks that any name with dots is from Internet, and any name without is the Intranet ("my work network"). So, if you try to connect, for example, to the server named trm.company.com, WM% decides it is on the Internet and drops МЗТ connection.
To fix it: go to "Settings" -> "Connections" -> "Advanced" tab -> "Exceptions..." button, and add the server name with dots to the "Work URL" list.
If it helps, please, let us know here.
Thanks.
I have tried you recommendations and now the VPN does not disconnect. I think their must be some security enabled on the terminal server as I still can't connect. I think it must be something to do with Citrix or the encryption level on the server. I will investigate further.
Can you explain me waht is Terminal Services Client? (Any screenshot?)
Can I use it with my Jamin and laptop with USB cable or WiFi?
Many thanks!
The terminal services client is an application which is included in the ROM of most PDA phones. It allows you to connect to a terminal server from you PDA much like you would normally do it from you workstation using Remote Desktop. Remote Desktop Client = Terminal Services Client
If you go to Start, Programs on your PDA you should see the application listed there.
You can either do one of the following to use the client.
1. Connect you Jamin to you PC using the USB. You will need to activate the Modem Link application. Dial the GPRS connection from the PC and then connect to the terminal server using Remote Desktop on you machine.
2. Open a GPRS connection on the PDA (Not Connected to the PC). Open the terminal services client on the PDA and connect to the terminal server.
Great!
The connection must be always GPRS? I'll pay for do this?
Have you some screenshot?
Markino said:
Great!
The connection must be always GPRS? I'll pay for do this?
Have you some screenshot?
Click to expand...
Click to collapse
Relaxxx! If you don't know what is it - it means that you don't need it at all
To access aremote desktop you need any IP connectivity: GPRS, EDGE, WiFi, but the desktop you connect to is not a service It can be your home PC or your business server, but it is not a thing you can use as, for example, any web site.
You need to establish a server by yourself or got an account for your company IT guys. You will pay for IP traffic, of course...
irgavin said:
Thanks.
I have tried you recommendations and now the VPN does not disconnect. I think their must be some security enabled on the terminal server as I still can't connect. I think it must be something to do with Citrix or the encryption level on the server. I will investigate further.
Click to expand...
Click to collapse
I've checked out the remote desktop with Win2000 server, but without VPN, on the Active Sync connection, it is OK. Ensure that your server uses RDP protocol (Microsoft), not Citrix propiertary protocol.
Ok i know i already saw the answer of this somewhere but i already looked for it and i just cant find it.
I have a athena and i would like to remotely connect to my pc that is on my office and use it remotely, i know there are programs to do this i just cant get the right words to find them.
can anyone help me out on this?
thankx
** make sure that you have windows xp pro**
1. download this file onto your pda and run it.
2. make sure that if you are using a router the you open up port 3389... it has to be this port and no other
3. on your desktop goto start/settings/control panel/system/remote and click the box that says "allow users to connect remotely to this computer", that is it you don't need to click anything else
4. open up the program and type in your ip address without the port number then username and password - which must match your windows login and password.
done
irus said:
** make sure that you have windows xp pro**
1. download this file onto your pda and run it.
2. make sure that if you are using a router the you open up port 3389... it has to be this port and no other
3. on your desktop goto start/settings/control panel/system/remote and click the box that says "allow users to connect remotely to this computer", that is it you don't need to click anything else
4. open up the program and type in your ip address without the port number then username and password - which must match your windows login and password.
done
Click to expand...
Click to collapse
All good advice but this may not work if your office PC is behind a firewall / your office network uses Network Address Translation or you need a VPN to access the network. Give it a go and see what happens but if the IP address of your office PC starts 10.0.0 or 192.168 or similar, it is unlikely to work. You will then have to use a remote access service.
apd said:
All good advice but this may not work if your office PC is behind a firewall / your office network uses Network Address Translation or you need a VPN to access the network. Give it a go and see what happens but if the IP address of your office PC starts 10.0.0 or 192.168 or similar, it is unlikely to work. You will then have to use a remote access service.
Click to expand...
Click to collapse
Also if your IP's range anywhere within 172.16.0.0 – 172.31.255.255, the you're behind a firewall.
ltxda said:
Also if your IP's range anywhere within 172.16.0.0 – 172.31.255.255, the you're behind a firewall.
Click to expand...
Click to collapse
If you're just using 3G/HSDPA you shouldn't have any problems connecting.
If you've got a DSL connection with a dynamic IP address (like mine with Virgin Media) Just register and download the NO-IP software (www.no-ip.com - it's free) then instead of typing in your Ip address on RD you'll put "....no-ip.biz" - or whatever they assign you.
As already stated you HAVE to open up port 3389 on your router and assign it to the relevant pc. This number you will find by entering "ipconfig" in the cmd window. Be aware that if your router gets turned off you could find that the IP address of your computer changes, so you'll have to go back into your router settings and change it to the new ip address for that pc.
I've tested RDP on XP Pro, Media Center 2005 and Vista. I found it to be a little better when the host was a Vista pc - whether this is my imagination or because it is designed with Vista in mind I don't know.
leoni1980 said:
If you're just using 3G/HSDPA you shouldn't have any problems connecting.
If you've got a DSL connection with a dynamic IP address (like mine with Virgin Media) Just register and download the NO-IP software (www.no-ip.com - it's free) then instead of typing in your Ip address on RD you'll put "....no-ip.biz" - or whatever they assign you.
As already stated you HAVE to open up port 3389 on your router and assign it to the relevant pc. This number you will find by entering "ipconfig" in the cmd window. Be aware that if your router gets turned off you could find that the IP address of your computer changes, so you'll have to go back into your router settings and change it to the new ip address for that pc.
I've tested RDP on XP Pro, Media Center 2005 and Vista. I found it to be a little better when the host was a Vista pc - whether this is my imagination or because it is designed with Vista in mind I don't know.
Click to expand...
Click to collapse
Of course, this only applies if you are not behind a corporate firewall using NAT or other dynamic IP behind the firewall. Also, if it is a corporate network, opening port 3389 may be (a) very difficult to convince your IT dept to do and (b) not very secure!
If one iof the dynamic dns systems works for you, you might try dyndns.org
hi.. is any one manage to connect to desktop pc from his athena from the internet?? ( no logmein)
dekyprio said:
hi.. is any one manage to connect to desktop pc from his athena from the internet?? ( no logmein)
Click to expand...
Click to collapse
yes, many athena users use terminal services/remote desktop to reach their desktops or servers. You must be able to get to port 3389 (or other port used for remote desktop) on your home or work network.
rermote desktop
can you explane me how i can do that or please email me [email protected].
thanxs very much
remote on athena
the proplem is that i run vista ultimate and i`m new to this
You can have a try on Gooer
I use Gooer Remote Desktop Service and it works fine.
remote on athena
thanxs but it does not work for me
dekyprio said:
thanxs but it does not work for me
Click to expand...
Click to collapse
Firstly log into your router and open port 3389.
It is best to test your connection with Wifi first as at least then you know you're halfway there!!
On Vista Ultimate (which is the same as mine) enable remote desktop connections to your computer. This is found in control panel/system/remote (tab) on xp - should be somewhere similar on Vista.
You also need to enable a password on your computer's login page.
You should now be able to log into your pc via wifi by entering your pc's IP address (found by entering IPCONFIG on the command prompt) on the remote desktop mobile display.you will need to enter your login name and password below this. There is no need to enter a domain name.
If you have a static IP address you should also be able to login this way over 3G. However if your connection is dynamic (such as with Virgin Media) you will need to go about it slightly differently. register with www.no-ip.com and they will provide a free static address for you. No-ip runs in the background on your Vista pc and you simply login on your pocket pc with the address they provide (rather than 192....laadeedaa) - for example (yourname).no-ip.biz.
Everything should then go hunky dory.
remote on athena
thanxs very much for the interest.i`ll try it.
I honestly don't know what I'm doing. All I know is that all the things I've tried so far didnt work.
Can someone guide me on how to set this up on my NookColor?
My PC and NookColor share the same wifi connection via an Airport Exteme router. I know that there are two IP Address: one form y router, which I can see on www.whatismyip.com and the other is my computer's which I can see via cmd > ipconfig. So, my question is-- how do I set this thing up? Any step by step procedure?
What have you already tried? Also what version of OS are you using, some versions of windows have RDP kneecapped. Also, where are you trying to view it from?
If you already have RDP going, you can use Wyse PocketCloud to manage the connections through your google account, it's pretty straight-forward.
Personally, I use TightVNC as the desktop client and AndroidVNC Viewer and ConnectBot on the nook. I only use my home computer when at home, so the setup is fairly simple, have AndroidVNC talk to myipaddress using port 5900. Be sure to use the connecting password when you set up TightVNC - also check the character count as you enter it, sometimes it doesn't take all the characters, ie; the password "bob-ismyuncle" is stored as "bob-ismy".
For connections remotely (not on the same network) I first SSH into the machine with ConnectBot, then set up a port forward to localhost:5901 which AndroidVNC then connects to.
Also, has anyone tried NX?
I'll assume you're a windows user?
Make sure RDP is enabled on your PC (google it, really easy to enable)
If BOTH machines are connected to your network... get the PC's IP address (via cmd ipconfig) and connect to it using the RDP port (3128 on Windows)... ex: "192.168.100.199:3128"
If you want to use RDP away from home, you need to configure your router to forward any external connections on the RDP port directly to your PC. Then you'll want to connect using your external (router's) IP address. Ex: 111.222.333.444:3128 => 192.168.100.199:3128 .... then connect to "111.222.333.444:3128"
I like LogMeIn free and logMeIn Ignition great little app. also teamviewer has a free version and free app for android